K8 T Neo Does Not Support Acpi 2 With Current Bios.. No Chance Of Cool N Quiet

Hi guyz
If you read the Readme that comes with the Athlon64 driver from AMD, let me quote: "This driver supports processor performance control via the processor objects defined in the ACPI 2.0 specification."
Well check ACPI verstion in Sandra, the current BIOS and board only support verstion 1.. no wonder the CPU is not speed stepping as it should with CoolNQuiet.
Any one here ever see there CPU speed step? If so give us all the specs and details.
Hope MSI will fix this, I don't get it.. they have a page http://www.msi.com.tw/html/e_service/techexpress/tech_column/6702/page11.htm where they show how to enable it.
BTW don't try to tell me I have a CPU that doesn't support it cause I do.. checked today, gt an AO ending on the model string and that one supports CoolNQUiet.
Simon
Simon

Good find!
New bios please.

Similar Messages

Does not support public parts with purpose assembly...

Hi,
When building a component, I'm getting the following error:
Server Component/Library DC does not support public parts with purpose 'assembly'.
Error: Build stopped due to an error: Server Component/Library DC does not support public parts with purpose 'assembly'.
Build plugin finished at 2011-03-24 12:12:40 GMT+01:00 (CET)
Total build plugin runtime: 0.311 seconds
Build finished with ERROR
To be more precise, one dc uses another from a public part that is "assembly" - so it's made the way it should be (both dc's are libraries, one java dc and the second one is server library)

Hi,
we are with NWDS 7.20 but afaik the "J2EE Server Component Library" in your version was replaced by Enterprise Application DCs in the meantime, so it is quite simple:
An assambly PP on a J2EE Server Component Library really does not make sense. The J2EE Server Component Library is the final assembly unit. You may use such a DC in two ways:
1. You want to use the classes that are bundled into the J2EE Server Component Library for compilation in another DC (Java or EJB). To achieve this you may create a COMPILATION PP on the J2EE Server Component Library that references compilation PP e.g. of your java DC. (The alternative is to let the using java DC directly reference the compilation PP of your Java DC.)
2. You have another assembly unit - e.g. an Enterprise application or another J2EE Server Component Library - that needs the classes in your J2EE Server Component Library at runtime. This is done by an application reference (in 7.20 defined in META-INF/application-j2ee-engine.xml of the DC that uses your J2EE Server Component Library). At runtime, the result is that your (initial) J2EE Server Component Library is the "parent class loader" of a using DC.
So indeed, there is no need for a PP of type assembly for a J2EE Server Component Library. This DC does not contrubute anything for assembly into another DC.
Rework your dependencies and PPs. [This PDF document|http://www.google.de/url?sa=t&source=web&cd=21&ved=0CBwQFjAAOBQ&url=http%3A%2F%2Fwww.sdn.sap.com%2Firj%2Fscn%2Findex%3Frid%3D%2Flibrary%2Fuuid%2F60d99678-1a29-2d10-94b4-9d9a67b7199b%26overridelayout%3Dtrue&ei=C1aSTZzgHsj0sga6l53QBg&usg=AFQjCNFGx2NeVkfWlnh0wGKsMasL95g18A] may be helpful.
Cheers,
Rolf

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

Lexmark does not support USB printing with Airport express

See email from Lexmark:
Hi Herman,
Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
Regards,
Arshad
Lexmark Technical Support
***Original Message***
On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
Dear Mamta,
Thank you very much for your support. I already tried what you
mention, but still without success. I downloaded again the x1100 all
in one driver but still I can't print.
Any suggestions?
Thank you,
Hernan
-----Original Message-----
From: [email protected] [mailto:[email protected]]
Sent: Sunday, June 18, 2006 7:30 AM
To: hernan
Subject: Re:Lexmark Technical Support (Req# 942782055)
Dear Hernan,
Thank you for contacting us regarding this matter. I appreciate the
opportunity to assist you, and I hope my suggestions will provide a
resolution.
Please follow the steps given below:
1. Click on "Start," "Control Panel" and "Printers and Faxes."
2. Right click on the Lexmark printer icon.
3. Click on "Properties."
4. Click on "Ports" tab.
5. Place a check mark against "Enable Bidirectional Support."
6. Click on "OK."
You may copy and paste the web address given below to access the
Lexmark 1000/1100 Color Jet printer Windows XP driver:
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
1:0:1:0:0&emeafr
ame=&fileID=1580&searchLang=en&searchLang=en
Please use the following steps to download the Lexmark 1100 Color Jet
printer Windows XP driver to your desktop:
1. Click on "Download Now."
2. On the "File Download" screen, choose "Save."
3. The next screen will be titled "Save As." Choose to "Save in
Desktop"
and click "OK."
4. You should see files being transferred.
***Note*** If your browser uses a different file downloading format
than specified above, you will need to resort to your browsers help
files for downloading instructions. The object of steps 1 - 4 is to
download the driver to your desktop. This way it is easily accessible.
5. Once the files have completed downloading, double click on the icon
with your file name.
6. On the "Win Zip Self-Extractor" screen click "OK."
7. To unzip the downloaded file choose "Unzip."
8. A screen will then display the number of files unzipped
successfully, click "OK."
9. Please follow the on screen instructions to complete installation
of your Lexmark printer.
If you have any more questions or concerns, please contact me at your
convenience and I will be happy to assist you. (If I am not available,
another representative will reply to you as soon as
possible.) To respond,
please select "Reply" in your e-mail software, and be sure that the
past e-mail is included in this reply.
[AOL Users: In order to include the previous e-mail, you must
highlight it with your mouse when you are replying.]
If you need to reply, please be sure to include in your message all
information from prior e-mail messages & replies. If your e-mail
client automatically deletes prior e-mail thread information, it will
cause a delay while we look up your support history. If this is the
case you may want to save the old e-mails as attachments and attach
them to the current e-mail.
Sincerely,
Mamta V
Lexmark eSupport Team
http://support.lexmark.com
Rate Your Support Experience! Your feedback is extremely valuable to
us.
Please click the link below to participate in the Lexmark Customer
Support Survey.
http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
07&getSurveyName
=
***Original Message***
On Sat Jun 17th 06:20:55 AM EST 2006,
hernan.>
I purchased the Apple airport express that connects
multiple
wireless-networked PCs to a usb printer.
is there a driver that can make this work?. I configured
the printer
according to the manual, received a test page and so on, but now it
takes ages to start printing and printing never gets to 100%
completion but to 99%. I am not able to cancel printing jobs and this
is a whole mess.
Best regards,
Hernan
vaio pcg-6c2l and IBM x40 Windows XP Both service pack2

Did you have a question?

Hosting company does not support SQL query with OUTFILE clause

From my mysql database, I want to allow the user to run a query and produce a csv / text file of our membership database. Unfortunately, I just found out my hosting company does not support the SQL query with OUTFILE clause for MySQL database.
Are there any other options available to produce a file besides me running the query in phpadmin and making the file available to users.
Thanks. George

Maybe this external Export Mysql data to CSV - PHP tutorial will be of help
Cheers,
Günter

Ios email app does not support user name with multiple "."

I have two gmail email addresses and have both set up on my ipad, however the ios email app cannot connect to the gmail server for one of the two accounts. Account settings are strictly identical and connection from the Gmail app works fine. The only difference I could find between the two accounts is that the one with connection issues uses a format of "[email protected]" whereas the one that works fine is "[email protected]". Is it a known bug that the ios app does not support the first format?
Thanks

Yes, double dots/periods are not allowed.

My Satellite A100 does not support SDHC cards with the internal card reader

Hi,
My satelite A100 does not support my sandisk 4 GB SDHC card.
"normal" SD cards are not a problem with the internal card reader, and there are no problems with the sandisk 4 GB SDHC card using a external card reader.
is there a software solution?
regrads,
Itock

I do not have time to read users manuals for your notebook model but all supported cards can be listed there. I suppose SDHC is not listed and not supported.
I do not know what you mean with software solution but, as far as I know, update for multimedia card reader is not available.

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

MS 2.1 'Does not support importing files containing tempo changes' message

OK, so I've just loaded up the 2.1 upgrade and opened up a couple of existing concerts, and I get the following message:
+File contains tempo changes+
+One or more of the files you are importing contains tempo change markers. This version of mainstage does not support importing files with tempo changes.+
It's a bit of a problem as the dialogue box appears several times during loading, and I have to click 'OK' every time, which adds to the length of time it takes to load up the concert (something I do several times during the course of my set).
I'm not using any MIDI stuff, just acoustic and electric guitar plus vocal channel strips and playback channels.
I've tried out some of my backing tracks, which have a ralletando at the back end, and they still seem to slow down properly (which isn't surprising, as they are audio files), and I've also tried setting all the sets back to the concert tempo, which hasn't stopped the issue occurring.
Any thoughts, anyone?

Hi Blueberry
Well, if you mean I put a tempo curve at the end of some of my audio files in Logic, in order to slow down at the end of the song, then, yes, I did do that. However, that still works in MS2.1, and anyway, why would that no longer be allowed, as that is an essential musical function. Also, if the upgrade meant I had to re-do the exporting nearly 200 backing tracks, them I'm afraid it would be back to 2.01 for me.
Furthermore, I tried starting MS up in 32 bit, and that didn't make any difference either.
As it is, this problem is (so far) only an inconvenience as it takes longer for me to load a new concert. What I'd like to understand is what does it refer to? and how can I prevent it showing this message?
Thanks

Does WLS support Debugging Servlets with JBuilder 3 ?

I have read all the news groups and it appears that WLS 4.5.1 does not
support debugging Servlets with Jbuilder 3.0.
I am using the trial version, does this matter ?
Or should I just buy another web server ?
Joe

I think below documents will be helpful to you.
http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13952/taskhelp/webservices/webservicesecurity/CreateDefaultWSSConfig.html
This document tell you that you can attach a weblogic webservice configuration using weblogic admin console.
After creating this configuration you need to updated this configuration as per the steps given under :
Use X.509 certificates to establish identity
Thanks,
sandeep

"Core Center does not support your motherboard" MSI P965 Neo Mobo

Hi all,
after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
Thanks and Best Regards
Phanos
PS
My System specs are
Intel core 2 duo 2.13GHz No Overclocking
Twinmos DDR667 3GB (2 x 512, 2 x 1GB)
P965 Neo Motherboard bios version 1.8
Gigabyte 7600GS Graphic card
Enermax 530 Watt
Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
Maxtor 16Mb cache 320 GB hard drive @ SATA-2, no RAID
Seagate 16Mb cache 200 GB hard drive @ IDE, no RAID
BIOS - optimal settings enable USB, 1394 and ACPI.
WinXP + SP2 + all latest Windows Updates

Hi Maesus,
the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
Best Regards
Phanos
I removed your email address to prevent you from getting spammed.
Those wishing to email Phanos, click the email icon to the left below his name.
Frankenputer

K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64. But if I attempt to run it "Core Center does not support your motherboard!" is displayed. The download website clearly states that Windows XP x64 is supported. The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86.
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

Motherboard does not support core center

I decided to upgrade core center through MSI update. Now when I try to start it get message "Motherboard does not support core center" Tried uninstalls of AMD drivers as well as core center to no avail. the old one worked ok, anyone know where I can get it?
PC specs
MSI K8t neo
Win xp pro SP2
Amd 64 3200
2 gig corsair ram
Asus Radeon xp800 Platanium
2x Western digital 10 gig sata drives
Pioneer DVD
Asus tv tuner
Creative x-fi elite pro

Quote
is that ok with you Sir?
It's your pc, not mine. So, yes, it is alright with me. I don't bother when people mess up things for themselves. We're always here to help things get on the road again... and we're happy to do it.
Just try to see what I'm telling you: if you do not experience serious trouble, then leave things alone. Also, always try to decide if a program is really necessary or that you can do without it. For example, if you use corecenter mainly as a monitoring tool, I'd advice you to uninstall it and not to install any monitoring tool at all. You can set Cool & Quiet in BIOS and make it work by installing the AMD CPU driver (you already did, I suppose) and set power settings to Minimal power in Control Panel. This way, you system will not overheat and if it does, it will shut down automatically. Corecenter doesn't contribute to these functions in any way.

MSI K8T Neo - does it support ddr2 modules?

MSI K8T Neo - does it support ddr2 modules?

Quote from: Zoolisha on 03-July-07, 06:05:07
tnx :(
its a CPU problem not a mobo. don't be disappointed from the board. if the CPU can work with DDR2 the board will have those DIMM slots.
i mean if you got board with DDR2 memory support and also have DDR2 memory sticks, you have to change CPU as well.

K8 T Neo Does Not Support Acpi 2 With Current Bios.. No Chance Of Cool N Quiet

Similar Messages

Maybe you are looking for