K850 printer drivers and updated toolbox for win 7, pro 64 bit

When will HP provide an updated driver and toolbox for the wide format inkjet printer? This expensive printer is useless without the toolbox. No way to align heads or check the accuracy of head alignment.
If HP abandons this printer it will join the 4 HP scanners sitting in my garage that $2300 were spent on and are now useless because HP chose not to provide updated drivers for them.
This will be my last HP product unless they stepup and support the products they sell.

Please be aware that this forum is a peer to peer support forum, it is not a direct link to HP support.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Can't download thinkvantage toolbox for win 7 (32-bit) from the site.

hi,
i try to download thinkvantage toolbox for windows 7 (32-bit),
however everytime i try to download, it stay at 119kb from the total 53,6 mb.
i already check in your site help page about the best time for download it.
i did try to download it in many times, day, night. but it still cant work! Im sure my connection is ok!
I can download all except this toolbox.
do you have any problem with the file? do you have another source where i can download it? i will very appreciate for your help. somehow its strange to me not to see the blue light in my toolbox button .
best regards for you all. GBU

The best source for Lenovo ThinkVantage Toolbox is the Lenovo Drivers and Software page:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TPAD-MATRIX
Select your model and then look in the "ThinkVantage Technologies" section.
Stephen Streufert
Senior Product Marketing Manager
PC-Doctor, Inc.
http://www.lenovothinkvantagetoolbox.com

Cannot get drivers and updates for my PC

I'm finally upgrading my hp pavilion d4500e cto desktop pc from XP to Windows 7 (I don't like Win 8 so got Win 7 Prof). Before upgrading, I want to update the BIOS if needed and save off the drivers and updates to external storage. I went to the Support page > Software and Drivers and searched on my product name. I'm having issues getting the drivers and updates I need for this PC. If I use the Solution and Update Finder wizard, it scans forever and never stops. I did a direct search on the product and clicked the product name. However I then get a page that says "Page Not Found". I tried searching for these drivers/updates on my newer HP Envy laptop thinking maybe I could at least save off from that PC. I get the same results after I click on the product name - Page Not Found . Help!! I need these drivers/updates ASAP. This PC still works great and has plenty of memory but due to software changes over the years I really need to upgrade to Win 7 now. TIA

You're very welcome.
There is no W7 BIOS update for your model.
There is a BIOS update for the XP operating system and you installed it, that would be the latest version.
Do not attempt to install a BIOS update written for another operating system. In other words, don't install that BIOS update after you install W7.
Here are the W7 x64 drivers you need...
Chipset driver:
http://www.nvidia.com/download/driverResults.aspx/14875/en-us
Graphics:
http://www.nvidia.com/download/driverResults.aspx/82758/en-us
Audio: First file on the list.
http://support.creative.com/Products/ProductDetails.aspx?catID=1&CatName=Sound+Blaster&prodID=14103&...
If you are missing any drivers after you install W7 and the above drivers, please post back and let me know what is missing and I will see what I can do to help.

Had to reload drivers and updates for my HP scanjet G4050, I now enter image scan to scan photos but nowhere is there a "send" button to get them to iPhoto

Since loading Maverick and then, with the assist of Apple Support, I had to reload drivers and updates for my HP scanjet G4050, I now enter image scan to scan photos but nowhere is there a "send" button to get them to iPhoto.

Here are a couple of ideas:
1. (my favorite) - connect the printer to the router with an Ethernet cable for virtually the same functionality, more speed and fewer connectivity issues.
2. Reset by turning the printer off, holding # and 6 keys while and for a few seconds after turning it back on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

How can I uninstall / remove HP printer drivers and software?

Hi,
I tried using the HP uninstall program to remove the HP printer drivers and related software, but I still see them in my hard drive. I see HP files in my Library/Preferences and Library/Printers folder. I will remove them by hand. Are there other HP files I should remove?
Thanks,
Ken

Hi Ken!
I have a HP printer as well, and these are the items that are on my HD.
HD > Applications: Hewlett-Packard Folder
HD > Users > Your Account > Library > Preferences:
com.apple.print.PrinterProxy.Your HP Printer.plist File
com.apple.print.PrintCenter.plist File
com.hp.printerutility.plist File
hp inkjet utility prefs File
com.hp.Device.Manager.plist File
com.hp.Photosmart.Studio.plist File
com.hp.scanpro.prefs File
com.hp.scanpro.plist File
com.hp.photosmart.scandestinations.plist File
Hewlett-Packard Preferences Folder
com.hp.printerselector.plist File
com.apple.print.custompresets.plist File
In the above Preferences folder, look for any other files or folders related to your printer as well.
HD > Library > Printers: hp Folder
But I also have HP camera software installed, so you may not have all of these.
ali b

Have new iMac OSx10.8.2, and when I connected my Epson Stylus pro3880, loaded printer drivers, and tried to print, the printer utility opens, then crashes. Any ideas? (it worked fine on my last iMac)

Have a new imac OSx10.8.2, and when I connected my Epson Stylus pro 3880, loaded print drivers, and tried to print, the printer utility opened and then crashed; happened several times. Any ideas? (it worked fine on my older imac)

I believe so. the driver version I have is 8.64
The person gave me the instructions to reset the printing system and I followed it. That's what corrected the printing drop down windows.
I am also having trouble finding the downloaded icc profiles for the papers I use. I see them in the Color Sync Utility, but not in the drop down window for Color Management. There is a thread on this forum relating to that, but I don't understand how to "copy" the profiles and put them elsewhere.

Download drivers and updates page error

When I go to the ni.com/downloads page and click on drivers and updates I get a page error. Anyone see this?
kph

We've recently made some upgrades to our Drivers and Updates systems. Unfortunately, during the upgrades we had a few issues with linking. We are working on getting this fixed ASAP. In the mean time, please use this link.
Thank you,
Seth B.
Staff Test Engineer | National Instruments
Certified LabVIEW Developer
Certified TestStand Developer
“Engineers like to solve problems. If there are no problems handily available, they will create their own problems.”- Scott Adams

Mac-specific drivers and other software for Windows

Mac-specific drivers and other software for Windows how can I download them with out the install cd?

Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

Printer drivers and lanuages removal

Hello,
Just got a new macbook. I wanted to know if there is a way to remove unused printer drivers and languages packages without reinstalling the OS and if so, how would I got about doing it.
Thanks,
Ethan

Hi Ethan,
You ask:
Anything can be done about unused printer drivers
removal?
Yes, the printer drivers are in the HD>Library>Printers folder.
Adrian

Debranded Touchsmart Drivers and Updates?

I'm thinking of buying a Debranded TouchSmart, and I want to know how do you know which drivers and updates to get if you don't know which model it is? Also, does anyone know if they still come with the bad hardrive that has the brick bug? Alot of these say they were refurbished, so I'm hoping they changed that drive or put the update on them. Does anyone know anything about these Debranded TouchSmarts?

Read the other thread on this same subject, it's all been covered in the past 2 weeks.
http://h30434.www3.hp.com/t5/TouchSmart-PC/Cant-find-Correct-Model-or-Serial-CTRL-Alt-S-Not-working-...
If the BIOS string still lists an HP S/N you can use HP Recovery media and drivers, if it does not contain the HP SN, then you can not and will need to get the apps on your own.

When installing itunes 10.5.1 for win 7 64 bit get message that installer is 32 bit.

Atempted to install itunes 10.5.1 for Win 7 64 bit. Receive dialog box that the installer is 32 bit. Points me to an address in Apple for Bonjour Print Services for Windows. After clickin on OK the install proceeds but Itunes will not start.
Itunes has also reformated the library so an older version of itunes can nolonger read the file.

I got the same message about the network resource that I can't access. The only difference is that I couldn't install Itunes 10.3 because I can't remove the old version of Bonjour. I couldn't get rid of anything in add/remove programs, but I went into my program folders and deleted everything that had to do with Itunes. I also ran a Windows Cleanup Utiltiy. Nothing will work. I still can't remove Itunes, Bonjour, Quicktime, MobileMe Control Panel, Apple Mobile Device Support, Apple Application Support, or Apple Software Update in add/remove programs because they are on a network resource that I can't access even though I deleted them from the program folders. This is very frustrating!

I need hp laserjet 1000 series driver for win 8 64 bit

i need hp laserjet 1000 series driver for win 8 64 bit
[Personal Information Removed]

Hi,
The printer is not supported on Windows 8 or Windows 8.1, a drevice is not available for the OS:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03450061
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

The download address of itunes 10.4 for Win 7 64-bit is totally incorrect. The one I donwload was for itunes 8.2. Can anyone help

The download address of itunes 10.4 for Win 7 64-bit is totally incorrect. The one I donwload was for itunes 8.2. Can anyone help?
The link I download was
Download for Windows 64 bit :
http://appldnld.apple.com/iTunes10/041-0719.20110720.rE358/iTunes64Setup.exe

what if they are turned off? I cannot install iTunes or QuickTime Pro 7 on my WIN7/64 Lenovo W520. ran all the repair cycles uninstalls, reinstalls about 10X each, no luck

K850 printer drivers and updated toolbox for win 7, pro 64 bit

Similar Messages

Maybe you are looking for