K8D master ft onboard video problem

Hi, I have the k8d master ft and when I install a pci vid card the onboard video is disabled. Does anyone know how or even if it is possible to run both? I could not find anything in bios but maybe I missed it.
thanks.

Sorry, you can't....this happens on all boards that I have seen.

Similar Messages

DirectX problems - Onboard video problems? K9VGM-V

I am having problems with loading the new Nero suite (7.xx) version. It keeps coming back with a DirectX error. The guys at Ahead are telling the same thing.
My question is: Can I use DirectX 9.0c using the onboard video? I don't know what bios I have yet.
PCTools 2000 tells me I have DirectX9.0c installed and is okay.

Thanks for the ideas. I have already done the Directx diagnostics. That didn't change anything.
when I try to run the Directx diag I get this error. "The procedure entry point could not be located in the dynamic link library GDI32.dll"
In fact, that dll (GDI32.dll) doesn't even show up in the list of directx files in the diagnostics window.
I have tried to load a different version of the dll but I can't since it's in use by windows.
The guys from Nero have told me that it's my video drivers incompatibility with with my video drivers. They have a program that copies a whole heck of a lot of details from my computer and creates logs.
I have since done the online upgrade of my video drivers from MSI. It still doesn't work.
I am noticing that I could not load Diskeeper either. It comes up with some error, too.
This has been very frustrating.
Thanks in advance, Ray.
Reloading windows is such a pain.

KM400A - OnBoard Video Problem

I am using the KM400A board with a 2600 sempron. I have loaded the new Rollercoaster Tycoon 3 game, and the game will not run saying that I do not have enough video memory / or video graphics card does not meet specs.
The game requires 64MB of video memory to play. The Atari site says to check DIrectX first, and I did, and all is fine. Next they say... get a new video card ...
This is the only PC game I have a problem with. All troubleshooting reports show that the video memory is 64 on the PC.
I have upgraded to the new Video Drivers from MSI and still does not work.
Anyone else have this problem or have any other solutions ? short of buying a new video card...
Thanks
Tim

RCT3 System Requirements:
Quote
Video: Any ATI Radeon™ or GeForce™ 2 with 32MB or higher; or other video card with 32MB and hardware T&L (ATI Radeon™ 64 MB SDR or GeForce™ 2 Pro or other video card with 64 MB or more memory and hardware T&L recommended)
S3/VIA IGP's lack of hardware T&L probably won't cut it. Have you the latest game patches and driver updates?
Latest KM400 IGP drivers released 12/13/04 (XP/2000)
Otherwise, consider upgrading to a real video card.

MOVED: K8NGM2-L onboard video problem after flashing BIOS

This topic has been moved to Linux/Unix.
https://forum-en.msi.com/index.php?topic=111410.0

http://www.msi.com.tw/program/search/ser/SerConRes.php?Page=2&num=0&DATA=2&SearchKey=6156
there are 3x 6156 models to start
a BX VA and a ZX
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=112
is the only one with a product page and piccy
did you save the old bios wen asked
have you Clear CMOS Guide
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=112
is all that remains of the 6905 ,not evan a bios file
so its not going to be an easy thing to find out
d/l the manuals and compare chip sets etc is all i can suggest

K8D Master-F 9131 problem with BIOS 1.2 and Raidcore BC4852

The board does not start the Raidcore BIOS with motherboard 9131 BIOS 1.2 installed. It works OK wih BIOS 1.1.
Raidcore 4852 FW is V130. (tested V110 = same problem)
Bios found here:
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?UID=441&kind=3
Both 1.1 and 1.2 BIOS was unable to recognise my Opteron 242 CPU steppings which indicate they are both quite old. Maybe MSI could fix these problems and include the newer CPU steppings like the ones for 250 CPUs. Bios 1.2 is dated nov. 28th 03 which is a year old. BUHU.
I am building a LARGE storage server based on this motherboard. Several others to come (planning on using the MSI K8D Master 3 -133 9161), but if MSI does not upgrade the BIOS for their high end boards I will start looking for another supplier real fast.
Sincerely
ArildS
Norwegian Central Securities Depository

I'll stick with the V1.10, but I'd fell better if MSI showed me they actively update their systems by releasing updated BIOS files from time to time.
I can't sell a 15000$ storage system that doesn't recognise the CPUs installed. The customer would laugh and tell me to come back with a supported system.
Isn't this a VERY valid reason for wanting updates? Even if it only is an updated CPU list?
The only reason I tried this MSI board is that it was the only one available with my retailer at the time I bought it with 3 PCI-X 100Mhz slots. Maybe I should go with a Tyan Thunder next time. Tyan at least show some activity.

MSI K7N2G-ILSR onboard video initialization problems

Hi, today I replaced my wife's trusty Abit KT7 motherboard with a MSI K7N2G-ILSR. I used the onboard video since she doesn't play games. Everything seemed to be working fine until I went to boot it up. The computer started up as usual, but the monitor did not intialize like it should. The message on the monitor said that " the monitor was working correctly and to check the cord or the computer." I rechecked all of the connections and everything seemed to be installed correctly. I thought that maybe there was something wrong with the onboard video, so I decided to install the Radeon 9000 that was in the old system. To my suprise I received the same message when I started the computer up the second time. I have built several systems and have never encountered a problem like this before. I read the thread about problems with the Radeon cards, but no one mentions anything about problems with the onboard video. I am using a Duron 750, Antec 330 watt PSU and 512 megs of Kingston Value Ram. I know that several posters have recommended that nforce 2 users need a more pwerful PSU and better ram, but I have a hard time beleiving that those things would cause the video not to intilaize. I would appreciate any feedback and/or suggestions because I need to make a desision about hwat to do with this board. Thx.

Well I appreciate the replys. I formated the harddrive before I installed the motherboard because I was worried that the via drivers would cause problems when I booted it up and installed Win XP. Bonz, you are right, I am just guessing that everything is OK since I can hear the system start up, but I can't see anything since the video never intializes. I rechecked all of the connections and even took the motherboard out and reinstalled the cpu, memory and motherboard and the same thing happened. I started thinking something was wrong with the monitor so I unplugged the monitor from my system, which I know works, and it did the same thing. I just wish I could get the video to intialize so I could see to get into the bios to look around. I will check the jumpers on the board and continue to mess around with it. I would appreciate any feedback I can get. Thx again.

K8D Master-F High/Low beep tones

Hello,
Running the system even on bare minimum (PSU, memory and CPUs only) the board will not post and will only return a constant high then low tone beep code. Information from AMIBIOS suggests faulty CPUs, but this is doubtful that both CPUs would be damaged (I've tried one at a time, and in different sockets), as their serial numbers are quite a distance apart.
Anything else I can try? or do I have a dead board?
Thanks in advance,
LJP

Quote
Originally posted by Wonkanoby
it would help if you listed full hardware specs
and psu details
the 4 pin 12v feed is connected?
the ram is registered ddr ?
Full specs:
MSI K8D Master-F motherboard
2x Opteron 240 CPUs
4xGiel 512mb Dual channel ddr 3200 ram (even with all removed it gives the high low beep tones)
This board uses a SSI compliant PSU, its 24 pin main power, 8 pin additional power. 550W supply thats in it.
*Mass of edits*
Couldn't tell you if its registered DDR, ram isnt the problem though, it would give a ram error beep code running with no ram onboard, yet it still has the high/low beeptones.

[SOLVED] switching from onboard video to a pci express card

Hello,
I have an onboard video card [VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)].
I have been running the nouveau driver, but the video card is not truly supported so I bought a [VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)].
However my lspci -k | grep -A 2 -i "VGA" gives this:
00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Kernel driver in use: nouveau
02:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS Rev. 3] (rev a2)
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: nouveau
Kernel modules: nouveau
Subsystem: eVga.com. Corp. Device 1302
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
And my xrandr -q gives:
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 4096 x 4096
VGA-1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 408mm x 255mm
1440x900 59.9*+ 75.0
1400x1050 60.0
1280x1024 60.0
1280x960 60.0
1152x864 75.0
1280x720 60.0
1024x768 75.1 70.1 66.0 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 72.8 75.0 66.7 60.0
720x400 70.1
I receive no output from the second card at all. Any help to troubleshoot this problem would be greatly appreciated. I simply would like to use one monitor through the VGA port on the new video card.
thanks.
Last edited by forshark (2013-05-30 19:10:25)

Thanks for the reply,
My bios isn't awesome enough to allow me to disable onboard video or set a default card. I'll hunt around for the rest. Also I am using lxdm if that is helpful. Heres my Xorg.0.log:
[ 4.803]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[ 4.803] X Protocol Version 11, Revision 0
[ 4.803] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[ 4.803] Current Operating System: Linux office 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64
[ 4.803] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8e550028-e5f5-40c2-b8f9-f43ac9ebf8ef ro quiet
[ 4.803] Build Date: 17 April 2013 02:37:06PM
[ 4.803]
[ 4.803] Current version of pixman: 0.30.0
[ 4.803] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.803] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.803] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 12:51:52 2013
[ 4.807] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.808] (==) No Layout section. Using the first Screen section.
[ 4.808] (==) No screen section available. Using defaults.
[ 4.808] (**) |-->Screen "Default Screen Section" (0)
[ 4.808] (**) | |-->Monitor "<default monitor>"
[ 4.808] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4.808] (==) Automatically adding devices
[ 4.808] (==) Automatically enabling devices
[ 4.808] (==) Automatically adding GPU devices
[ 4.812] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4.812] Entry deleted from font path.
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.813] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.813] Entry deleted from font path.
[ 4.813] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.813] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 4.813] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.813] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.813] (II) Loader magic: 0x7fcc20
[ 4.813] (II) Module ABI versions:
[ 4.813] X.Org ANSI C Emulation: 0.4
[ 4.813] X.Org Video Driver: 14.1
[ 4.813] X.Org XInput driver : 19.1
[ 4.813] X.Org Server Extension : 7.0
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 4.814] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 4.816] (--) PCI:*(0:0:13:0) 10de:03d0:103c:2a6c rev 162, Mem @ 0xfc000000/16777216, 0xc0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 4.816] (--) PCI: (0:2:0:0) 10de:10c3:3842:1302 rev 162, Mem @ 0xf9000000/16777216, 0xd0000000/268435456, 0xee000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/524288
[ 4.816] Initializing built-in extension Generic Event Extension
[ 4.816] Initializing built-in extension SHAPE
[ 4.816] Initializing built-in extension MIT-SHM
[ 4.816] Initializing built-in extension XInputExtension
[ 4.816] Initializing built-in extension XTEST
[ 4.816] Initializing built-in extension BIG-REQUESTS
[ 4.816] Initializing built-in extension SYNC
[ 4.816] Initializing built-in extension XKEYBOARD
[ 4.816] Initializing built-in extension XC-MISC
[ 4.816] Initializing built-in extension SECURITY
[ 4.816] Initializing built-in extension XINERAMA
[ 4.816] Initializing built-in extension XFIXES
[ 4.816] Initializing built-in extension RENDER
[ 4.816] Initializing built-in extension RANDR
[ 4.816] Initializing built-in extension COMPOSITE
[ 4.816] Initializing built-in extension DAMAGE
[ 4.816] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.816] Initializing built-in extension DOUBLE-BUFFER
[ 4.816] Initializing built-in extension RECORD
[ 4.816] Initializing built-in extension DPMS
[ 4.816] Initializing built-in extension X-Resource
[ 4.817] Initializing built-in extension XVideo
[ 4.817] Initializing built-in extension XVideo-MotionCompensation
[ 4.817] Initializing built-in extension XFree86-VidModeExtension
[ 4.817] Initializing built-in extension XFree86-DGA
[ 4.817] Initializing built-in extension XFree86-DRI
[ 4.817] Initializing built-in extension DRI2
[ 4.817] (II) LoadModule: "glx"
[ 4.818] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4.822] (II) Module glx: vendor="X.Org Foundation"
[ 4.822] compiled for 1.14.1, module version = 1.0.0
[ 4.822] ABI class: X.Org Server Extension, version 7.0
[ 4.822] (==) AIGLX enabled
[ 4.823] Loading extension GLX
[ 4.823] (==) Matched nouveau as autoconfigured driver 0
[ 4.823] (==) Matched nvidia as autoconfigured driver 1
[ 4.823] (==) Matched nv as autoconfigured driver 2
[ 4.823] (==) Matched nouveau as autoconfigured driver 3
[ 4.823] (==) Matched nvidia as autoconfigured driver 4
[ 4.823] (==) Matched nv as autoconfigured driver 5
[ 4.823] (==) Matched nouveau as autoconfigured driver 6
[ 4.823] (==) Matched nvidia as autoconfigured driver 7
[ 4.823] (==) Matched nv as autoconfigured driver 8
[ 4.823] (==) Matched vesa as autoconfigured driver 9
[ 4.823] (==) Matched modesetting as autoconfigured driver 10
[ 4.823] (==) Matched fbdev as autoconfigured driver 11
[ 4.823] (==) Assigned the driver to the xf86ConfigLayout
[ 4.823] (II) LoadModule: "nouveau"
[ 4.823] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 4.826] (II) Module nouveau: vendor="X.Org Foundation"
[ 4.826] compiled for 1.14.0, module version = 1.0.7
[ 4.826] Module class: X.Org Video Driver
[ 4.826] ABI class: X.Org Video Driver, version 14.1
[ 4.826] (II) LoadModule: "nvidia"
[ 4.827] (WW) Warning, couldn't open module nvidia
[ 4.827] (II) UnloadModule: "nvidia"
[ 4.827] (II) Unloading nvidia
[ 4.827] (EE) Failed to load module "nvidia" (module does not exist, 0)
[ 4.827] (II) LoadModule: "nv"
[ 4.827] (WW) Warning, couldn't open module nv
[ 4.827] (II) UnloadModule: "nv"
[ 4.827] (II) Unloading nv
[ 4.827] (EE) Failed to load module "nv" (module does not exist, 0)
[ 4.827] (II) LoadModule: "vesa"
[ 4.827] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4.828] (II) Module vesa: vendor="X.Org Foundation"
[ 4.828] compiled for 1.14.0, module version = 2.3.2
[ 4.828] Module class: X.Org Video Driver
[ 4.828] ABI class: X.Org Video Driver, version 14.1
[ 4.828] (II) LoadModule: "modesetting"
[ 4.828] (WW) Warning, couldn't open module modesetting
[ 4.828] (II) UnloadModule: "modesetting"
[ 4.828] (II) Unloading modesetting
[ 4.828] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.828] (II) LoadModule: "fbdev"
[ 4.829] (WW) Warning, couldn't open module fbdev
[ 4.829] (II) UnloadModule: "fbdev"
[ 4.829] (II) Unloading fbdev
[ 4.829] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 4.829] (II) NOUVEAU driver
[ 4.829] (II) NOUVEAU driver for NVIDIA chipset families :
[ 4.829] RIVA TNT (NV04)
[ 4.829] RIVA TNT2 (NV05)
[ 4.829] GeForce 256 (NV10)
[ 4.829] GeForce 2 (NV11, NV15)
[ 4.829] GeForce 4MX (NV17, NV18)
[ 4.829] GeForce 3 (NV20)
[ 4.829] GeForce 4Ti (NV25, NV28)
[ 4.829] GeForce FX (NV3x)
[ 4.829] GeForce 6 (NV4x)
[ 4.829] GeForce 7 (G7x)
[ 4.829] GeForce 8 (G8x)
[ 4.829] GeForce GTX 200 (NVA0)
[ 4.829] GeForce GTX 400 (NVC0)
[ 4.829] (II) VESA: driver for VESA chipsets: vesa
[ 4.829] (++) using VT number 7
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (II) [drm] nouveau interface version: 1.1.0
[ 4.834] (WW) Falling back to old probe method for vesa
[ 4.834] (II) Loading sub module "dri"
[ 4.834] (II) LoadModule: "dri"
[ 4.835] (II) Module "dri" already built-in
[ 4.835] (II) NOUVEAU(0): Loaded DRI module
[ 4.835] (--) NOUVEAU(0): Chipset: "NVIDIA NV4c"
[ 4.835] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4.835] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 4.835] (==) NOUVEAU(0): RGB weight 888
[ 4.835] (==) NOUVEAU(0): Default visual is TrueColor
[ 4.835] (==) NOUVEAU(0): Using HW cursor
[ 4.835] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 4.835] (==) NOUVEAU(0): Page flipping enabled
[ 4.835] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 4.927] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 4.989] (II) NOUVEAU(0): EDID for output VGA-1
[ 4.989] (II) NOUVEAU(0): Manufacturer: HSD Model: 240f Serial#: 0
[ 4.989] (II) NOUVEAU(0): Year: 2010 Week: 52
[ 4.989] (II) NOUVEAU(0): EDID Version: 1.3
[ 4.990] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 4.990] (II) NOUVEAU(0): Sync: Separate SyncOnGreen
[ 4.990] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 41 vert.: 26
[ 4.990] (II) NOUVEAU(0): Gamma: 2.20
[ 4.990] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 4.990] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 4.990] (II) NOUVEAU(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
[ 4.990] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 4.990] (II) NOUVEAU(0): Supported established timings:
[ 4.990] (II) NOUVEAU(0): 720x400@70Hz
[ 4.990] (II) NOUVEAU(0): 640x480@60Hz
[ 4.990] (II) NOUVEAU(0): 640x480@67Hz
[ 4.990] (II) NOUVEAU(0): 640x480@72Hz
[ 4.990] (II) NOUVEAU(0): 640x480@75Hz
[ 4.990] (II) NOUVEAU(0): 800x600@56Hz
[ 4.990] (II) NOUVEAU(0): 800x600@60Hz
[ 4.990] (II) NOUVEAU(0): 800x600@72Hz
[ 4.990] (II) NOUVEAU(0): 800x600@75Hz
[ 4.990] (II) NOUVEAU(0): 832x624@75Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@60Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@70Hz
[ 4.990] (II) NOUVEAU(0): 1024x768@75Hz
[ 4.990] (II) NOUVEAU(0): 1152x864@75Hz
[ 4.990] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 4.990] (II) NOUVEAU(0): Supported standard timings:
[ 4.990] (II) NOUVEAU(0): #0: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 4.990] (II) NOUVEAU(0): #1: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
[ 4.990] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 4.990] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 4.990] (II) NOUVEAU(0): #4: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 4.990] (II) NOUVEAU(0): #5: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 4.990] (II) NOUVEAU(0): #6: hsize: 1024 vsize 768 refresh: 66 vid: 18017
[ 4.990] (II) NOUVEAU(0): Supported detailed timing:
[ 4.990] (II) NOUVEAU(0): clock: 106.5 MHz Image Size: 408 x 255 mm
[ 4.990] (II) NOUVEAU(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
[ 4.990] (II) NOUVEAU(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
[ 4.990] (II) NOUVEAU(0): Serial No: 052AW1WY01107
[ 4.990] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 24 H max: 75 kHz, PixClock max 145 MHz
[ 4.990] (II) NOUVEAU(0): Monitor name: iP192A
[ 4.990] (II) NOUVEAU(0): EDID (in hex):
[ 4.990] (II) NOUVEAU(0): 00ffffffffffff0022640f2400000000
[ 4.990] (II) NOUVEAU(0): 341401030a291a78eade95a3544c9926
[ 4.990] (II) NOUVEAU(0): 0f5054bfee80950f90408180814081c0
[ 4.990] (II) NOUVEAU(0): 714f614601019a29a0d0518422305098
[ 4.990] (II) NOUVEAU(0): 360098ff1000001c000000ff00303532
[ 4.990] (II) NOUVEAU(0): 41573157593031313037000000fd0038
[ 4.990] (II) NOUVEAU(0): 4b184b0e000a202020202020000000fc
[ 4.990] (II) NOUVEAU(0): 006950313932410a0a0a0a0a0a0a0047
[ 4.991] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.991] (II) NOUVEAU(0): Output VGA-1 connected
[ 4.991] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 4.991] (II) NOUVEAU(0): Output VGA-1 using initial mode 1440x900
[ 4.991] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4.991] (--) NOUVEAU(0): Virtual size is 1440x900 (pitch 0)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 4.991] (**) NOUVEAU(0): Driver mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Mode "1024x768": 71.6 MHz (scaled from 0.0 MHz), 52.7 kHz, 66.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.64 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz)
[ 4.991] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 4.991] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 4.991] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 4.992] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 4.992] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 4.992] (==) NOUVEAU(0): DPI set to (96, 96)
[ 4.992] (II) Loading sub module "fb"
[ 4.992] (II) LoadModule: "fb"
[ 4.992] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.023] (II) Module fb: vendor="X.Org Foundation"
[ 5.023] compiled for 1.14.1, module version = 1.0.0
[ 5.023] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.023] (II) Loading sub module "exa"
[ 5.023] (II) LoadModule: "exa"
[ 5.023] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.025] (II) Module exa: vendor="X.Org Foundation"
[ 5.026] compiled for 1.14.1, module version = 2.6.0
[ 5.026] ABI class: X.Org Video Driver, version 14.1
[ 5.026] (II) Loading sub module "shadowfb"
[ 5.026] (II) LoadModule: "shadowfb"
[ 5.026] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.029] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.029] compiled for 1.14.1, module version = 1.0.0
[ 5.029] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.029] (II) Loading sub module "dri"
[ 5.029] (II) LoadModule: "dri"
[ 5.029] (II) Module "dri" already built-in
[ 5.029] (II) NOUVEAU(G0): Loaded DRI module
[ 5.029] (--) NOUVEAU(G0): Chipset: "NVIDIA NVa8"
[ 5.029] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 5.029] (==) NOUVEAU(G0): RGB weight 888
[ 5.029] (==) NOUVEAU(G0): Default visual is TrueColor
[ 5.029] (==) NOUVEAU(G0): Using HW cursor
[ 5.029] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 5.029] (==) NOUVEAU(G0): Page flipping enabled
[ 5.029] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 5.060] (II) NOUVEAU(G0): Output DVI-I-1 has no monitor section
[ 5.068] (II) NOUVEAU(G0): Output HDMI-1 has no monitor section
[ 5.178] (II) NOUVEAU(G0): Output VGA-2 has no monitor section
[ 5.189] (II) NOUVEAU(G0): EDID for output DVI-I-1
[ 5.196] (II) NOUVEAU(G0): EDID for output HDMI-1
[ 5.249] (II) NOUVEAU(G0): EDID for output VGA-2
[ 5.249] (II) NOUVEAU(G0): Manufacturer: DEL Model: a00c Serial#: 808793676
[ 5.249] (II) NOUVEAU(G0): Year: 2004 Week: 47
[ 5.249] (II) NOUVEAU(G0): EDID Version: 1.3
[ 5.249] (II) NOUVEAU(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 5.249] (II) NOUVEAU(G0): Sync: Separate
[ 5.249] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 30 vert.: 23
[ 5.249] (II) NOUVEAU(G0): Gamma: 2.20
[ 5.249] (II) NOUVEAU(G0): DPMS capabilities: Off; RGB/Color Display
[ 5.249] (II) NOUVEAU(G0): Default color space is primary color space
[ 5.249] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 5.249] (II) NOUVEAU(G0): redX: 0.631 redY: 0.347 greenX: 0.309 greenY: 0.582
[ 5.249] (II) NOUVEAU(G0): blueX: 0.149 blueY: 0.088 whiteX: 0.312 whiteY: 0.328
[ 5.249] (II) NOUVEAU(G0): Supported established timings:
[ 5.249] (II) NOUVEAU(G0): 720x400@70Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@60Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@72Hz
[ 5.249] (II) NOUVEAU(G0): 640x480@75Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@56Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@60Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@72Hz
[ 5.249] (II) NOUVEAU(G0): 800x600@75Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@60Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@70Hz
[ 5.249] (II) NOUVEAU(G0): 1024x768@75Hz
[ 5.249] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 5.249] (II) NOUVEAU(G0): Supported detailed timing:
[ 5.249] (II) NOUVEAU(G0): clock: 65.0 MHz Image Size: 304 x 228 mm
[ 5.249] (II) NOUVEAU(G0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0
[ 5.249] (II) NOUVEAU(G0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0
[ 5.249] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[ 5.249] (II) NOUVEAU(G0): Serial No: D82544BF056L
[ 5.249] (II) NOUVEAU(G0): Monitor name: DELL E153FP
[ 5.249] (II) NOUVEAU(G0): EDID (in hex):
[ 5.249] (II) NOUVEAU(G0): 00ffffffffffff0010ac0ca04c363530
[ 5.253] (II) NOUVEAU(G0): 2f0e0103681e17782eb060a1584f9526
[ 5.253] (II) NOUVEAU(G0): 165054afce0001010101010101010101
[ 5.253] (II) NOUVEAU(G0): 01010101010164190040410026301888
[ 5.253] (II) NOUVEAU(G0): 360030e410000018000000fd00384c1e
[ 5.253] (II) NOUVEAU(G0): 3f08000a202020202020000000ff0044
[ 5.253] (II) NOUVEAU(G0): 383235343442463035364c0a000000fc
[ 5.253] (II) NOUVEAU(G0): 0044454c4c204531353346500a200025
[ 5.253] (II) NOUVEAU(G0): Printing probed modes for output VGA-2
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.253] (II) NOUVEAU(G0): Output DVI-I-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output HDMI-1 disconnected
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 connected
[ 5.253] (II) NOUVEAU(G0): Using exact sizes for initial modes
[ 5.253] (II) NOUVEAU(G0): Output VGA-2 using initial mode 1024x768
[ 5.253] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5.253] (--) NOUVEAU(G0): Virtual size is 1440x900 (pitch 0)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz eP)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 5.253] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 5.253] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 5.254] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 5.254] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 5.254] (II) Loading sub module "fb"
[ 5.254] (II) LoadModule: "fb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.254] (II) Module fb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "exa"
[ 5.254] (II) LoadModule: "exa"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 5.254] (II) Module exa: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 2.6.0
[ 5.254] ABI class: X.Org Video Driver, version 14.1
[ 5.254] (II) Loading sub module "shadowfb"
[ 5.254] (II) LoadModule: "shadowfb"
[ 5.254] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 5.254] (II) Module shadowfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.14.1, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) UnloadModule: "vesa"
[ 5.254] (II) Unloading vesa
[ 5.254] (--) Depth 24 pixmap format is 32 bpp
[ 5.255] (II) NOUVEAU(G0): Opened GPU channel 0
[ 5.261] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 5.261] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 5.261] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 5.266] (II) EXA(256): Driver allocated offscreen pixmaps
[ 5.266] (II) EXA(256): Driver registered support for the following operations:
[ 5.266] (II) Solid
[ 5.266] (II) Copy
[ 5.266] (II) Composite (RENDER acceleration)
[ 5.266] (II) UploadToScreen
[ 5.266] (II) DownloadFromScreen
[ 5.266] (==) NOUVEAU(G0): Backing store disabled
[ 5.266] (==) NOUVEAU(G0): Silken mouse enabled
[ 5.267] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 5.267] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 5.267] (==) NOUVEAU(G0): DPMS enabled
[ 5.267] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.269] (II) NOUVEAU(0): Opened GPU channel 0
[ 5.273] (II) NOUVEAU(0): [DRI2] Setup complete
[ 5.273] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 5.273] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 5.276] (II) EXA(0): Driver allocated offscreen pixmaps
[ 5.276] (II) EXA(0): Driver registered support for the following operations:
[ 5.276] (II) Solid
[ 5.277] (II) Copy
[ 5.277] (II) Composite (RENDER acceleration)
[ 5.277] (II) UploadToScreen
[ 5.277] (II) DownloadFromScreen
[ 5.277] (==) NOUVEAU(0): Backing store disabled
[ 5.277] (==) NOUVEAU(0): Silken mouse enabled
[ 5.277] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 5.277] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 5.277] (==) NOUVEAU(0): DPMS enabled
[ 5.277] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.277] (--) RandR disabled
[ 5.444] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 5.444] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context
[ 5.444] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 5.445] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 5.445] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 5.445] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 5.447] (II) AIGLX: Loaded and initialized nouveau
[ 5.447] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 5.456] (II) NOUVEAU(0): NVEnterVT is called.
[ 5.457] (II) NOUVEAU(0): Setting screen physical size to 381 x 238
[ 5.457] resize called 1440 900
[ 5.688] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 5.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.688] (II) LoadModule: "evdev"
[ 5.688] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 5.690] (II) Module evdev: vendor="X.Org Foundation"
[ 5.690] compiled for 1.14.0, module version = 2.8.0
[ 5.690] Module class: X.Org XInput Driver
[ 5.690] ABI class: X.Org XInput driver, version 19.1
[ 5.690] (II) Using input driver 'evdev' for 'Power Button'
[ 5.690] (**) Power Button: always reports core events
[ 5.690] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 5.690] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.690] (--) evdev: Power Button: Found keys
[ 5.690] (II) evdev: Power Button: Configuring as keyboard
[ 5.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 5.690] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 5.690] (**) Option "xkb_rules" "evdev"
[ 5.690] (**) Option "xkb_model" "evdev"
[ 5.690] (**) Option "xkb_layout" "us"
[ 5.771] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 5.771] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 5.771] (II) Using input driver 'evdev' for 'Power Button'
[ 5.771] (**) Power Button: always reports core events
[ 5.771] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 5.771] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 5.771] (--) evdev: Power Button: Found keys
[ 5.771] (II) evdev: Power Button: Configuring as keyboard
[ 5.771] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 5.771] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 5.771] (**) Option "xkb_rules" "evdev"
[ 5.771] (**) Option "xkb_model" "evdev"
[ 5.771] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event2)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event2"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.772] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.772] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2/event2"
[ 5.772] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 8)
[ 5.772] (**) Option "xkb_rules" "evdev"
[ 5.772] (**) Option "xkb_model" "evdev"
[ 5.772] (**) Option "xkb_layout" "us"
[ 5.772] (II) config/udev: Adding input device Lite-On Technology Corp. USB Keyboard (/dev/input/event3)
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 5.772] (II) Using input driver 'evdev' for 'Lite-On Technology Corp. USB Keyboard'
[ 5.772] (**) Lite-On Technology Corp. USB Keyboard: always reports core events
[ 5.772] (**) evdev: Lite-On Technology Corp. USB Keyboard: Device: "/dev/input/event3"
[ 5.772] (--) evdev: Lite-On Technology Corp. USB Keyboard: Vendor 0x4ca Product 0x4b
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found 1 mouse buttons
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found scroll wheel(s)
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found relative axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing relative x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found absolute axes
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Forcing absolute x/y axes to exist.
[ 5.773] (--) evdev: Lite-On Technology Corp. USB Keyboard: Found keys
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as mouse
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Configuring as keyboard
[ 5.773] (II) evdev: Lite-On Technology Corp. USB Keyboard: Adding scrollwheel support
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: YAxisMapping: buttons 4 and 5
[ 5.773] (**) evdev: Lite-On Technology Corp. USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3/event3"
[ 5.773] (II) XINPUT: Adding extended input device "Lite-On Technology Corp. USB Keyboard" (type: KEYBOARD, id 9)
[ 5.773] (**) Option "xkb_rules" "evdev"
[ 5.773] (**) Option "xkb_model" "evdev"
[ 5.773] (**) Option "xkb_layout" "us"
[ 5.776] (II) evdev: Lite-On Technology Corp. USB Keyboard: initialized for relative axes.
[ 5.776] (WW) evdev: Lite-On Technology Corp. USB Keyboard: ignoring absolute axes.
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) keeping acceleration scheme 1
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration profile 0
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration factor: 2.000
[ 5.777] (**) Lite-On Technology Corp. USB Keyboard: (accel) acceleration threshold: 4
[ 5.777] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event4)
[ 5.777] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 5.777] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[ 5.777] (**) USB Optical Mouse: always reports core events
[ 5.777] (**) evdev: USB Optical Mouse: Device: "/dev/input/event4"
[ 5.777] (--) evdev: USB Optical Mouse: Vendor 0x461 Product 0x4d20
[ 5.777] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[ 5.777] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[ 5.777] (--) evdev: USB Optical Mouse: Found relative axes
[ 5.777] (--) evdev: USB Optical Mouse: Found x and y relative axes
[ 5.777] (II) evdev: USB Optical Mouse: Configuring as mouse
[ 5.777] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[ 5.777] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 5.777] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 5.777] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input4/event4"
[ 5.777] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[ 5.777] (II) evdev: USB Optical Mouse: initialized for relative axes.
[ 5.778] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 5.778] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 5.778] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 5.778] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 5.778] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 5.778] (II) No input driver specified, ignoring this device.
[ 5.778] (II) This device may have been added with another device file.
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 5.778] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 5.779] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 5.779] (II) No input driver specified, ignoring this device.
[ 5.779] (II) This device may have been added with another device file.
[ 7.250] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 7.250] (II) No input driver specified, ignoring this device.
[ 7.250] (II) This device may have been added with another device file.
[ 7.252] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event7)
[ 7.252] (II) No input driver specified, ignoring this device.
[ 7.252] (II) This device may have been added with another device file.
[ 7.254] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event8)
[ 7.254] (II) No input driver specified, ignoring this device.
[ 7.254] (II) This device may have been added with another device file.
[ 7.256] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 7.256] (II) No input driver specified, ignoring this device.
[ 7.256] (II) This device may have been added with another device file.
[ 7.258] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event10)
[ 7.258] (II) No input driver specified, ignoring this device.
[ 7.258] (II) This device may have been added with another device file.
[ 7.260] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event11)
[ 7.260] (II) No input driver specified, ignoring this device.
[ 7.260] (II) This device may have been added with another device file.
[ 7.270] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event12)
[ 7.270] (II) No input driver specified, ignoring this device.
[ 7.270] (II) This device may have been added with another device file.
[ 7.272] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event13)
[ 7.272] (II) No input driver specified, ignoring this device.
[ 7.272] (II) This device may have been added with another device file.
[ 7.274] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event14)
[ 7.274] (II) No input driver specified, ignoring this device.
[ 7.274] (II) This device may have been added with another device file.
[ 7.289] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event15)
[ 7.289] (II) No input driver specified, ignoring this device.
[ 7.289] (II) This device may have been added with another device file.
[ 16.144] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.144] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 16.144] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 16.144] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.145] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.979] (II) NOUVEAU(0): EDID vendor "HSD", prod id 9231
[ 16.979] (II) NOUVEAU(0): Using hsync ranges from config file
[ 16.979] (II) NOUVEAU(0): Using vrefresh ranges from config file
[ 16.979] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz eP)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1400x1050"x0.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 16.979] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 16.982] (II) NOUVEAU(0): Modeline "1024x768"x66.0 71.63 1024 1080 1192 1360 768 769 772 798 -hsync +vsync (52.7 kHz e)
[ 16.984] resize called 1440 900

How can i allocate more RAM for my onboard video card on a 2011 macbook pro 13 inch running windows 7 via bootcamp

I noticed that since Macbooks.. macs in general use an EFI instead of BIOS. . .. Now i need to allocate some more RAM for the onboard video card since its currently running with an estimated 50mb.. I would like to increase this to 512 and cut the 3.95 down to 3.5 MB for the rest of the system ( allowing me to run more graphic intensive games and the such ... ) I know this could slow down the entire system.. ( i am aware of this ) and have gotten a 3rd party application to control and close out uneeded processes during gaming.. I just need more ram for my onboard video card.. Any help?

You don't allocate more RAM towards your video card, you put more RAM into the machine and hopefully some machines will bump the CPU graphics RAM allocation up a little.
The problem is you bought a integrated only graphics computer, if you want to 3D game you need a dedicated graphics computer with it's own or dedicated VRAM.
If your this serious about 3D gaming, your on the wrong platform.
Get a Windows 7 64bit i7 8GB RAM expandable 3D gaming tower with a good power supply and video card upgrade path, this way every few years you buy and stick in a new video card to play the latest games.
Mac's are not gaming machines and never will be because they would last too long if we could upgrade them.
http://www.cbscores.com/index.php?sort=ogl&order=desc

K8NGM2-FID onboard video won't go to DVI in XP

System is:
K8NGM2-FID
BIOS 3.4
Onboard video using 128 MB memory off motherboard
Athlon 64 x2 3800+
2 GB (2 x 1GB) RAM Patriot PDC2G3200LLK 2-3-2-5
Case Antec Sonata II w/PSU Antec Smartpower 2.0 450W dual 12V (15A/17A)
HDD Seagate ST316012A Barracuda 7200.9 160 GB
OS WinXP SP2 auto updated
This system has run 24/7 for about 5 months using onboard video driving a Samsung SyncMaster 940t thru the onboard DVI port.
I am using the DVI (digital) onboard video output to drive my monitor. Recently I have experienced blank screens when waking up from monitor power down (20 minute w/o activity - no screensaver, just auto power down). When I connect a VGA (analog) cable from the onboard connector to the monitor's analog input the video is there but not present on DVI (digital) output of board. Otherwise the machine is still completely functional, just no DVI video output.
Rebooting, the video signal is present on BOTH connectors (DVI and VGA) up to the point when Windows loads the desktop (i.e., past Windows boot screens), then it switches to VGA ONLY.
If I power down and wait 3-4 hours, the DVI will continue to work after Windows loads the desktop, then will not return after the monitor powers down due to inactivity (20 minutes, set in properties - screen saver) OR a warm reboot OR a power cycle. Switching to the VGA (analog) output, the video is still there and system is running as before, but with analog video only, no DVI (digital). This occurs with two other monitors that have dual inputs (HP and Viewsonic).
Video drivers are from MSI and are the current Version 8205 - (8.2.0.5 on device manager screen) but BIOS is 3.4. BIOS update 3.4->3.5->3.6 notes do not mention any DVI issues so I am hesitant to flash to 3.6 (current version) as I do not think it will fix the problem.
Bringing up nVidia Nview desktop manager, it 'sees' the monitor but there is no mention of DVI or VGA interface or way to switch between them. If I hook up a TV to the Svideo output it 'sees' that as well as the monitor and I can switch between them.
Does anyone know of a way to explicitly direct signal to either of the onboard video connectors (DVI and VGA) connector on this board (K8NGM2-FID)?
Any other ideas?
Thanks in advance,
ss

I fixed the system.
However, I still don't know the root cause of the original problem.
The missing piece of the fix was doing an uninstall of the video device drivers using the Control Panel 'Add or Remove Programs' function. Prior to that I was just updating things using either the package's native installers or the Device Manager Update Driver function.
After the uninstall I did a clean install of the MSI drivers off a CD and now have selectable digital and/or analog displays in Windows XP. Also, the nvidia drivers DO work, provided they are installed on a 'clean' suystem (thanks, Stu). Installing either driver set as an update results in unstable output - sometimes digital, sometimes analog.
Moral of the story: clean up toothpaste before squeezing the tube again.
ss

How to disable onboard video on KM4M-L?

Does anybody know how to disable the onboard video card of the KM4M-L? I tried just plugging in another AGP card, but it doesn't work. I've gone through the bios, but can't find any reference to the onbard video.
Another question I have is which card is faster, the onboard video or my old Viper V770 with 32MBs of ram (I know, it's ancient!)
Thanks in advance for your help.

The viper but not by much. The o/b AGP is disabled automaticly but your problem is your board only supports AGPx4/1.5v cards.
Have a read through this thread (it's a P4 board but the same applies).

Video Problem with MS-6390 Motherboard

Hey everyone, here is my problem. My current video card is an old GeForce 2 MX 440 AGP. I've never had a problem with it. Today I purchashed a PNY GeForce FX 5200 AGP.
When I remove my old card, and install the new one, I have a problem which i can't seem to solve. my pc boots up, checks the ram, blah blah blah, when it goes to start up Windows XP. The screen remains black. It doesnt even show the windows xp is loading logo. Nothing. I took the video card back where i got it, they slapped it in a machine there, and it worked perfectly. So I came back home, gave PNY a call. They asked me if the card had an internal video card, I said yes, we went in and disabled it. (at least i think we did) Where the bios mentions how much ram is to be dedicated to the onboard video card, i selected disabled. So i started the machine up, and there was no picture, so i figured that was it, problem solved. So I slap the PNY card in there. Same results. NOTHING. Is there something I am missing here? Any help would and I would be VERY gratful!

Hi..
The thing with these new TI and FX cards is that they require a lot of power to run porperly.. If ure system is running at around 80% capasity, then probly the VGA card hasnt enought power left over in the PSU to initalize properly.. That might be why the system goes blank when the XP boots..
It would be a wise idea to post ure compleate system configaration to get a better answer,,
Regards

MSI K8D Master PCI-X Question

Hi,
I was just wandering if anyone could tell me if the MSI K8D Master is compatible with any PCI-X 16 video cards.
Any information would be appreciated.

This is a server board, and server typically have no use for AGP or other fancy videostuff.
You are confusing PCI-E with the PCI-X that the board has.
PCI-X is an extended PCI slot that can do 64bit and 100MHz instead of the normal PCI being 32 Bit and max 66MHz.
This lifts the PCI speed from max 256MB/s to 1.2GB/s.
Raid controllers and very-fast network controller bennefit a lot from this.
Ergo, the K8D boards are for server use only.
If you want a big graphical workstation with 2 Opterons, it's the K8T Master board that you are looking for.
But it also doesn't have PCI-E as of yet.

K8D Master-FT PCI / Riser Card Help

Ok, I have just taking my first venture into the true server class motherboard. We chose the K8D Master-FT w/ a pair of opteron 240's. I have ran into a few issues that I just can't seem to find any answers on.
1. We used a third-party case which didn't come with a riser card. Do I need a PCI-X riser card or can I still use a 32bit riser. Also once I have the correct riser card can I still use 32bit PCI devices on the riser?
2. Next if I only want to use one slot can I just use the PCI-X slot on the motherboard without a riser? If so can I use a 32bit PCI card?
Thanks a bunch in advance.

Ok. Here are the details. We get the system board in and we grab a rack case with the correct form factor. Problem is the case didn't come with a riser card. None the less we where under the same impression that we could stick a PCI or PCI-X card in the slot. We only have a single card (RAID controller) which we intend to use. When we insert the PCI (32-bit) raid card in the PCI-X slot the system won't boot. We even tried inserting the card every which way we could in the slot thinking maybe we had inserted it wrong. Still no luck. Should our raid controller be 64 bit? Also we did have some riser cards that came with some ATX form factor rack cases, but when inserted into the PCI-X slot, the card slots face oddly up the motherboard towards the I/O panel. Thanks.

K8D Master 3-133 FA4R: deactivate VGA

Hi,
is it possible to deactivate the onboard-VGA on a K8D Master 3-133 FA4R?
I've a PCI-VGA Card wich works like an IP-Extender so i can view&control the Computer over the Internet.
Best Regards, Erwin Preuner

Well it does say Offboard PCI/ISA IDE device and then the manual talks about a graphics card should work correctly????
Could be a typo on the BIOS or in the manual (I hope the first), but that's the closest as I get to an option.
However, with most MSI boards, adding VGA card to a system with onboard VGA, will take the added over the onboard.
But I'm guessing now.

K8D master ft onboard video problem

Similar Messages

Maybe you are looking for