K8MM-ILSR PROBLEM with ATI Radeon 9550 of 256MB AGP port 8X...

Hello, I have a  motherboard MSI-K8MM-ILSR, when use the onboard video card works correctly, but the problem begins when I install a ATI Radeon 9550 of 256MB, is AGP port 8X and has its dissipator, in other machines it works well and your temperature is ok. My monitor is Samsung Sync Master 793s at 75 Hz. The Problem is the following: the machine crash and the video is distorted and it is congealed, this happens after playing a little, the video card drivers are updated (Catalyst 5,6), I'm use Windows XP Service Pack 1, Thanks... and excuse me my English...

Some other options you can try:
- uninstall the previous vid-drivers and use driver cleaner software to uninstall everything
- disable onboard video in the BIOS;
- set fastwrite to disabled/no (if it's there)
- set AGP Aperture Size to 128 (if it doesn't do anything, go to 64);
- set AGP port to 4x.
- Start hoping  .... good luck! 
(BTW, the last two options may cause your system to operate slightly slower, but it's hardly worth mentioning ... )

Similar Messages

  • Problems with ATI Radeon HD 2600, electrical interference or flickering pix

    Problems with ATI Radeon HD 2600, electrical interference or flickering pixels
    I have a Macro 8 core purchased just 4 months ago with the ATI Radeon HD 2600. Just started getting what looks like electrical interference or flickering pixels all over the screen. It gets worse and worse to the point where i see and cant work then clears up for an hour and then comes back.
    If I change the resolution from 1680x1050 to 1600x1200 everything looks fine and the problem goes away.
    Monitor works fine on two other computers, driver is up to date.
    Would like to upgrade at some point just disappointed that I’m already having problems.
    Any suggestions would be very helpful, in the mean time I’ll searching the forums.
    Thanks,

    When you called Applecare or went to a Genius bar were they of no help?

  • Problem with ati radeon in 4530s

    hi ....i have problem with ati radeon graphic in hp 4530s ....
    when i install graphic driver apear black screen and i dont see anything ....
    i change windows and load that properly but when install graphic driver black screen apear again.. 
    driver download is corectly i download driver from hp this problom is not from driver..but i dont what's problem
    Please Help Me....Thnx
    Sorry my english language  is weak...:manvery

    Nimestä päätellen oletan että oot varmaan suomesta  
    Eli suomeksi sanottuna osnavi sanoo että ongelma voi johtua liian heikkotehoisesta virtalähteestä, sitä ei voi säätää tehokkaammaksi mistään biosista vaan jos se on alitehoinen pitää hommata uusi tehokkaampi virtalähde. Eli nuo arvot löytyy todennäköisesti sen virtalähteen kupeessa olevasta tarrasta. Se 12 volttia pitäisi olla vähintään 12 amppeeria että se riittäisi kunnolla radeonin näytönohjaimelle. Yleensä 300 wattinen poweri on riittävä, eli siinä tarrassa pitäisi olla maininta ainakin siitä kokonaistehosta, esim total output 300w tai jotain vastaavaa. Vika voi aivan hyvin olla jossain muuallakin, mutta yleensä täällä aina ensimmäiseksi syylliseksi arvellaan virtalähdettä, itselläni kyllä toisessa koneessa radeon 9200se näytönohjain toimii vaikka virtalähde on vain 200 wattinen. Niin ja muuten... eikö olisi helpompaa kysyä neuvoa ensin joltain suomenkieliseltä sivustolta  

  • Problems with ati radeon 9700

    hi there,
    since i recently upgraded my board to this helluva rocket... and reinstalled window i was unable to get my ati running stable with the board. it works perfectly with my other computers (p3 1ghz asus board, duron 900 with abit board, p4 2,4 with intel board)
    and it has been working for 1 year in that intel board p4 machine.
    but with the upgrade to the 875p neo i constantly get vpu recovery with standard catalyst drivers,  and texture errors in games with modded omega drivers,
    ive been reading about disabling agp 8x and stuff. but the bios doesnt have the option... and no other agp options.... (pretty crappy bios i think anyway...)
    did anyone experience similar problems?
    cheers
    my config is
    p4 2,53
    875p neo
    ati radeon 9700 tx
    dual channel 1gb ddr 333

    thanks for all the replys... gotta check that all out...
    i have not intentionally overclocked my system...  gotta take a look at that too...
    as far as it goes for problems with the PSU,  i got a zalman ZM400B-APS 400 Watt  PSU some silent mofu (my machine never was more silent this should be enuff for a 9700 (though i have 3 120gb and one 160gb dvd burner and 9 fans installed (including cpu fan)  ) maybe ill turn off some of em... (who needs less than 30degree celsius anyway in a rig...)
    regarding reinstall of XP, yes i formatted HD and reinstalled XP then.....
    the fresh install is right now waiting for me to return home after work..  lets see how it will work...  with the tips you all gave me....
    btw i read in another posting that adding your rigs specs is the way to go in here...
    by searching the forums for problems with radeon cards cards it delivered all those topics where people have a radeon or 9700 in their specs...  
    maybe search should have a tick box to exclude or include specs in searches... would make things more convenient for searching and not bothering people with already extensivley discussed stuff...
    cheers

  • Problems with ati radeon powersaving and vboxdrv

    Hi
    I use an old Laptop with an ATI Radeon Mobility x300:
    $ lspci | grep -i vga
    01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300]
    , Kernel 2.6.36.1 and the latest xorg/radeon packages.
    To use the powersaving features, I have
    echo low > /sys/class/drm/card0/device/power_profile
    in /etc/rc.local. This works as expected, but when I load the vbox-modules on startup, I get the following errors:
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
    vboxdrv: counter framework which can generate NMIs is active. You have to prevent
    vboxdrv: the usage of hardware performance counters by
    vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
    vboxdrv: Found 1 processor cores.
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
    AND when after that, when /etc/rc.local is executed:
    Uhhuh. NMI received for unknown reason a0 on CPU 0. You have some hardware problem, likely on the PCI bus. Dazed and confused, but trying to continue
    If I disable these modules on startup, everything is OK, so it seems that the vbox-driver has something to do with it.
    Do I have to worry about this and is there a fix for this problem?
    Regards,
    drm

    Hi
    I use an old Laptop with an ATI Radeon Mobility x300:
    $ lspci | grep -i vga
    01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300]
    , Kernel 2.6.36.1 and the latest xorg/radeon packages.
    To use the powersaving features, I have
    echo low > /sys/class/drm/card0/device/power_profile
    in /etc/rc.local. This works as expected, but when I load the vbox-modules on startup, I get the following errors:
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
    vboxdrv: counter framework which can generate NMIs is active. You have to prevent
    vboxdrv: the usage of hardware performance counters by
    vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
    vboxdrv: Found 1 processor cores.
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 3.2.10 (interface 0x00140001).
    AND when after that, when /etc/rc.local is executed:
    Uhhuh. NMI received for unknown reason a0 on CPU 0. You have some hardware problem, likely on the PCI bus. Dazed and confused, but trying to continue
    If I disable these modules on startup, everything is OK, so it seems that the vbox-driver has something to do with it.
    Do I have to worry about this and is there a fix for this problem?
    Regards,
    drm

  • MS-6309 V2.x problems with ATI-All in Wonder Pro AGP 2.X

    I have a  MS-6309 V2.x and are trying to have my  ATI-All in Wonder Pro AGP 2.X  working on this Mainboard !  The computer crash after loging and restarts imediately  ! this repeats to the invinity !  I have the latest bios update !  Some one with the same problem please tell me about your work arround !

    Ok ! I have figured out the problem largely because of your aid on this forum ! Thanks to all !
    The problem is the compatibility with the CPU's !!!
    Well here are all the information found on the CPU's
    I have a :  Pentium III  costa rica
                   850/256/100/1.7v
                   3045A586-1116 SL4CC
    The Pentium III is the big problem It crash all the time on all systems !
    and a :     Celeron
                   900/128/100/1.75v
                   Q151A233-0248 SL5LX
    The celeron crash when it whant's on Windows and crash from time to time when I use certain Software on Linux system
    One question does your Bios Upgrades include the microcode for these CPU or is it the Operating system (Under Windows) update.sys that does the updates ! 
    It's not the ram responsible for the crashes but the CPU'S !

  • ATI RADEON 9600 PRO 256MB AGP VIDEO CARD PC/MAC

    This card is available from:
    https://www.directdial.com/100-435065.html
    My X800 XT blew up my logic board.
    This was the best 256MB card I could find.
    They had 30 of these when I ordered today at $209.

    That sounds attractive except for me, living in Canada.
    The handling and brokerage fee charged by the US delivery service,
    UPS or FEDEX, make the Canadian store's price more attractive.
    Plus I ordered it Monday and get it today.
    BTW stock is back to 29 as of today.

  • ATI Radeon 9550 (no) accelerating

    Hi.
    I'm not able to enable acceleration with my Radeon 9550 (R350) card (open driver).
    Direct rendering seems to be enabled:
    direct rendering: Yes
    But:
    OpenGL vendor string: Mesa Project
    OpenGL renderer string: Software Rasterizer
    OpenGL version string: 2.1 Mesa 7.7
    I tried enabling KMS by adding radeon to modules array at mkinitcpio.conf (and then rebuilding the image) and to the modules array at rc.conf, but I get a kernel panic with both options.
    Here's my xorg.conf:
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "extmod"
    Load "dri2"
    Load "dri"
    Load "dbe"
    Load "glx"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 280 210 # mm
    Identifier "Monitor0"
    VendorName "SAM"
    ModelName "SyncMaster"
    HorizSync 30.0 - 55.0
    VertRefresh 50.0 - 120.0
    Option "DPMS"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "NoAccel" # [<bool>]
    #Option "SWcursor" # [<bool>]
    #Option "Dac6Bit" # [<bool>]
    #Option "Dac8Bit" # [<bool>]
    #Option "BusType" # [<str>]
    #Option "CPPIOMode" # [<bool>]
    #Option "CPusecTimeout" # <i>
    #Option "AGPMode" # <i>
    #Option "AGPFastWrite" # [<bool>]
    #Option "AGPSize" # <i>
    #Option "GARTSize" # <i>
    #Option "RingSize" # <i>
    #Option "BufferSize" # <i>
    #Option "EnableDepthMoves" # [<bool>]
    #Option "EnablePageFlip" # [<bool>]
    #Option "NoBackBuffer" # [<bool>]
    #Option "DMAForXv" # [<bool>]
    #Option "FBTexPercent" # <i>
    #Option "DepthBits" # <i>
    #Option "PCIAPERSize" # <i>
    #Option "AccelDFS" # [<bool>]
    #Option "IgnoreEDID" # [<bool>]
    #Option "DisplayPriority" # [<str>]
    #Option "PanelSize" # [<str>]
    #Option "ForceMinDotClock" # <freq>
    #Option "ColorTiling" # [<bool>]
    #Option "VideoKey" # <i>
    #Option "RageTheatreCrystal" # <i>
    #Option "RageTheatreTunerPort" # <i>
    #Option "RageTheatreCompositePort" # <i>
    #Option "RageTheatreSVideoPort" # <i>
    #Option "TunerType" # <i>
    #Option "RageTheatreMicrocPath" # <str>
    #Option "RageTheatreMicrocType" # <str>
    #Option "ScalerWidth" # <i>
    #Option "RenderAccel" # [<bool>]
    #Option "SubPixelOrder" # [<str>]
    #Option "ShowCache" # [<bool>]
    #Option "DynamicClocks" # [<bool>]
    #Option "VGAAccess" # [<bool>]
    #Option "ReverseDDC" # [<bool>]
    #Option "LVDSProbePLL" # [<bool>]
    #Option "AccelMethod" # <str>
    #Option "DRI" # [<bool>]
    #Option "ConnectorTable" # <str>
    #Option "DefaultConnectorTable" # [<bool>]
    #Option "DefaultTMDSPLL" # [<bool>]
    #Option "TVDACLoadDetect" # [<bool>]
    #Option "ForceTVOut" # [<bool>]
    #Option "TVStandard" # <str>
    #Option "IgnoreLidStatus" # [<bool>]
    #Option "DefaultTVDACAdj" # [<bool>]
    #Option "Int10" # [<bool>]
    #Option "EXAVSync" # [<bool>]
    #Option "ATOMTVOut" # [<bool>]
    #Option "R4xxATOM" # [<bool>]
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RV350 AS [Radeon 9550]"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768" "1152x864"
    EndSubSection
    EndSection
    My Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.7.3.902 (1.7.4 RC 2)
    Release Date: 2009-12-26
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux phobos 2.6.32-ARCH #1 SMP PREEMPT Sat Dec 26 08:26:17 UTC 2009 i686
    Kernel command line: root=/dev/sda1 ro
    Build Date: 26 December 2009 11:37:45AM
    Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 3 00:11:59 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) | |-->Monitor "Monitor0"
    (**) | |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x81e4c60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:4153:174b:0200 ATI Technologies Inc RV350 AS [Radeon 9550] rev 0, Mem @ 0xc0000000/268435456, 0xdfef0000/65536, I/O @ 0x0000b800/256, BIOS @ 0x????????/131072
    (--) PCI: (0:1:0:1) 1002:4173:174b:0201 ATI Technologies Inc RV350 AS [Radeon 9550] (Secondary) rev 0, Mem @ 0xb0000000/268435456, 0xdfee0000/65536
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI RS880
    (II) Primary Device is: PCI 01@00:00:0
    (II) RADEON(0): TOTO SAYS 00000000dfef0000
    (II) RADEON(0): MMIO registers at 0x00000000dfef0000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon 9600 AS (AGP)" (ChipID = 0x4153)
    (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): Legacy BIOS detected
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
    (==) RADEON(0): Page Flipping disabled
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 250.000000, mclk: 200.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
    (II) RADEON(0): DFP table revision: 3
    (II) RADEON(0): Output VGA-0 using monitor section Monitor0
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Output S-video has no monitor section
    (II) RADEON(0): Default TV standard: PAL
    (II) RADEON(0): TV standards supported by chip: NTSC PAL
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_DAC1
    DDC reg: 0x60
    (II) RADEON(0): Port1:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_DAC2
    DFP1: INTERNAL_TMDS1
    DDC reg: 0x64
    (II) RADEON(0): Port2:
    XRANDR name: S-video
    Connector: S-video
    TV1: INTERNAL_DAC2
    DDC reg: 0x0
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "VGA-0:DDC control interface" registered at address 0x6E.
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: SAM Model: 25 Serial#: 1095840053
    (II) RADEON(0): Year: 2002 Week: 5
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync: Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 28 vert.: 21
    (II) RADEON(0): Gamma: 1.80
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.632 redY: 0.335 greenX: 0.295 greenY: 0.593
    (II) RADEON(0): blueX: 0.143 blueY: 0.067 whiteX: 0.283 whiteY: 0.298
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 720x400@88Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@87Hz (interlaced)
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 56.2 MHz Image Size: 267 x 200 mm
    (II) RADEON(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
    (II) RADEON(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 55 kHz, PixClock max 70 MHz
    (II) RADEON(0): Monitor name: SyncMaster
    (II) RADEON(0): Serial No: HGDT111969
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004c2d250035315141
    (II) RADEON(0): 050c0103681c15502afb99a1554b9724
    (II) RADEON(0): 11484cfff80031594559614071400101
    (II) RADEON(0): 010101010101f91520f830581f202040
    (II) RADEON(0): 13000bc81000001e000000fd0032781e
    (II) RADEON(0): 3707000a202020202020000000fc0053
    (II) RADEON(0): 796e634d61737465720a2020000000ff
    (II) RADEON(0): 00484744543131313936390a20200072
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Unhandled monitor type 0
    finished output detect: 1
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: SAM Model: 25 Serial#: 1095840053
    (II) RADEON(0): Year: 2002 Week: 5
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync: Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 28 vert.: 21
    (II) RADEON(0): Gamma: 1.80
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.632 redY: 0.335 greenX: 0.295 greenY: 0.593
    (II) RADEON(0): blueX: 0.143 blueY: 0.067 whiteX: 0.283 whiteY: 0.298
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 720x400@88Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@87Hz (interlaced)
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 56.2 MHz Image Size: 267 x 200 mm
    (II) RADEON(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
    (II) RADEON(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 55 kHz, PixClock max 70 MHz
    (II) RADEON(0): Monitor name: SyncMaster
    (II) RADEON(0): Serial No: HGDT111969
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004c2d250035315141
    (II) RADEON(0): 050c0103681c15502afb99a1554b9724
    (II) RADEON(0): 11484cfff80031594559614071400101
    (II) RADEON(0): 010101010101f91520f830581f202040
    (II) RADEON(0): 13000bc81000001e000000fd0032781e
    (II) RADEON(0): 3707000a202020202020000000fc0053
    (II) RADEON(0): 796e634d61737465720a2020000000ff
    (II) RADEON(0): 00484744543131313936390a20200072
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Unhandled monitor type 0
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): Output VGA-0 connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Output S-video disconnected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output VGA-0 using initial mode 1024x768
    (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    after xf86InitialConfiguration
    (**) RADEON(0): Display dimensions: (280, 210) mm
    (**) RADEON(0): DPI set to (92, 123)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules/libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.2.1
    ABI class: X.Org Video Driver, version 6.0
    (==) RADEON(0): Assuming overlay scaler buffer width is 1920
    (II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) RADEON(0): RADEONScreenInit c0000000 0 0
    Entering TV Save
    Save TV timing tables
    saveTimingTables: reading timing tables
    TV Save done
    disable primary dac
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x10000000
    (II) RADEON(0): MC_FB_LOCATION : 0xcfffc000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Using 32 MB GART aperture
    (II) RADEON(0): Using 1 MB for the ring buffer
    (II) RADEON(0): Using 2 MB for vertex/indirect buffers
    (II) RADEON(0): Using 29 MB for GART textures
    (II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
    (II) RADEON(0): Reserved area from (0,1024) to (1024,1026)
    (II) RADEON(0): Largest offscreen area available: 1024 x 7165
    (II) RADEON(0): Will use front buffer at offset 0x0
    (II) RADEON(0): Will use back buffer at offset 0x1000000
    (II) RADEON(0): Will use depth buffer at offset 0x1400000
    (II) RADEON(0): Will use 237568 kb for textures at offset 0x1800000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xc0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (==) RADEON(0): Using AGP 4x
    (II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x1039/0x0645; Card 0x1002/0x4153 0x174b/0x0200]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xe0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb7021000
    (II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb7020000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6d45000
    (II) RADEON(0): [agp] GART texture map handle = 0xe0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xa50c5000
    (II) RADEON(0): [drm] register handle = 0x2bfde000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xcfffc000 0x1fff0000
    (II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0xcfffc000 is: 0xcfffc000
    (WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe1ffe000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xcfffc000 0xcfffc000
    (II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Setting up tile and stipple cache:
    32 128x128 slots
    32 256x256 slots
    16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00402000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00406000
    (II) RADEON(0): Largest offscreen area available: 1024 x 7157
    (II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
    (II) Loading sub module "theatre_detect"
    (II) LoadModule: "theatre_detect"
    (II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
    (II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): no multimedia table present, disabling Rage Theatre.
    (II) RADEON(0): Set up overlay video
    (II) RADEON(0): Set up textured video
    disable primary dac
    disable TV
    disable primary dac
    init memmap
    init common
    init crtc1
    init pll1
    freq: 65000000
    best_freq: 65000000
    best_feedback_div: 130
    best_ref_div: 9
    best_post_div: 6
    restore memmap
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0xcfffc000 0xcfffc000
    (II) RADEON(0): MC_AGP_LOCATION : 0xe1ffe000
    restore common
    restore crtc1
    restore pll1
    finished PLL1
    set RMX
    set primary dac
    enable primary dac
    disable TV
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 270 x 203
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device ImPS/2 Generic Wheel Mouse
    (**) ImPS/2 Generic Wheel Mouse: always reports core events
    (**) ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event4"
    (II) ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Generic Wheel Mouse: Found relative axes
    (II) ImPS/2 Generic Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Generic Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
    (II) ImPS/2 Generic Wheel Mouse: initialized for relative axes.
    (II) config/hal: Adding input device CHESEN USB Keyboard
    (**) CHESEN USB Keyboard: always reports core events
    (**) CHESEN USB Keyboard: Device: "/dev/input/event6"
    (II) CHESEN USB Keyboard: Found keys
    (II) CHESEN USB Keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device CHESEN USB Keyboard
    (**) CHESEN USB Keyboard: always reports core events
    (**) CHESEN USB Keyboard: Device: "/dev/input/event5"
    (II) CHESEN USB Keyboard: Found keys
    (II) CHESEN USB Keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "CHESEN USB Keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: SAM Model: 25 Serial#: 1095840053
    (II) RADEON(0): Year: 2002 Week: 5
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync: Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 28 vert.: 21
    (II) RADEON(0): Gamma: 1.80
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.632 redY: 0.335 greenX: 0.295 greenY: 0.593
    (II) RADEON(0): blueX: 0.143 blueY: 0.067 whiteX: 0.283 whiteY: 0.298
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 720x400@88Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@87Hz (interlaced)
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 56.2 MHz Image Size: 267 x 200 mm
    (II) RADEON(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
    (II) RADEON(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 55 kHz, PixClock max 70 MHz
    (II) RADEON(0): Monitor name: SyncMaster
    (II) RADEON(0): Serial No: HGDT111969
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004c2d250035315141
    (II) RADEON(0): 050c0103681c15502afb99a1554b9724
    (II) RADEON(0): 11484cfff80031594559614071400101
    (II) RADEON(0): 010101010101f91520f830581f202040
    (II) RADEON(0): 13000bc81000001e000000fd0032781e
    (II) RADEON(0): 3707000a202020202020000000fc0053
    (II) RADEON(0): 796e634d61737465720a2020000000ff
    (II) RADEON(0): 00484744543131313936390a20200072
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Unhandled monitor type 0
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
    (II) RADEON(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz)
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
    (II) RADEON(0): Manufacturer: SAM Model: 25 Serial#: 1095840053
    (II) RADEON(0): Year: 2002 Week: 5
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync: Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 28 vert.: 21
    (II) RADEON(0): Gamma: 1.80
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.632 redY: 0.335 greenX: 0.295 greenY: 0.593
    (II) RADEON(0): blueX: 0.143 blueY: 0.067 whiteX: 0.283 whiteY: 0.298
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 720x400@88Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@87Hz (interlaced)
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
    (II) RADEON(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
    (II) RADEON(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
    (II) RADEON(0): #3: hsize: 1152 vsize 864 refresh: 60 vid: 16497
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 56.2 MHz Image Size: 267 x 200 mm
    (II) RADEON(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end 1048 h_border: 0
    (II) RADEON(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 120 Hz, H min: 30 H max: 55 kHz, PixClock max 70 MHz
    (II) RADEON(0): Monitor name: SyncMaster
    (II) RADEON(0): Serial No: HGDT111969
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff004c2d250035315141
    (II) RADEON(0): 050c0103681c15502afb99a1554b9724
    (II) RADEON(0): 11484cfff80031594559614071400101
    (II) RADEON(0): 010101010101f91520f830581f202040
    (II) RADEON(0): 13000bc81000001e000000fd0032781e
    (II) RADEON(0): 3707000a202020202020000000fc0053
    (II) RADEON(0): 796e634d61737465720a2020000000ff
    (II) RADEON(0): 00484744543131313936390a20200072
    (II) RADEON(0): EDID vendor "SAM", prod id 37
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Unhandled monitor type 0
    (II) RADEON(0): Output: S-video, Detected Monitor Type: 0
    If you need more information, ask for it.
    Any help needed and appreciated
    Last edited by Butcher (2010-01-02 23:44:45)

    leadghost wrote:
    Try building libdrm with the option:
      --enable-radeon-experimental-api
    I did, in fact, it's enabled by default in the libdrm-git PKGBUILD from AUR.
    AndyRTR wrote:why do you recommend KMS that is not yet supported by Arch? the card should run fine without KMS and DRI1. there's no gain but pain using KMS right now!
    I though I would need to enable KMS to enable acceleration. Anyway I'm not using KMS right now, but I don't have acceleration

  • Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

    hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
    the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
    now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
    after rebooting it get this crash report from the system :
    Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
    6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
    reteattartPvvl Ili maaliceicdn mchk aiog eproMh
    rekroi-MCpor reorrosg-:
    porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
    IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
    20IAA00200_inv0xid
    0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
    I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
    0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
    Mo MAA e8atr code inf 00: 0 0x00 St
    00s00ode
    spSccifsic codr
    texr ccorre02sor:
    0 8O4x0
    r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
    b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
    e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
    8ernc0ro,rrR2: 0xected error
    CR3: 0x00e7a000, CR4: 0x000006e0
    EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
    ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
    EFL: 0x00000006, EIP: 0x0019e9c0
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
    0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
    0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
    0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
    0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
    0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
    0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
    Kernel version:
    Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
    Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
    Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
    Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
    Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
    Network Service: AirPort, AirPort, en2
    PCI Card: ATY,RadeonX1900, Display, Slot-1
    Serial ATA Device: ST3250820AS P, 232.89 GB
    Parallel ATA Device: OPTIARC DVD RW AD-7170A
    USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
    USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
    USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
    USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
    FireWire Device: built-in_hub, unknown_value, Unknown
    FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
    FireWire Device: My Book Device, WD, Up to 800 Mb/sec
    here's my complete config if it can help :
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Number Of Processors: 2
    Total Number Of Cores: 4
    L2 Cache (per processor): 4 MB
    Memory: 2 GB
    Bus Speed: 1.33 GHz
    Boot ROM Version: MP11.005C.B04
    SMC Version: 1.7f8
    ATI Radeon X1900 XT:
    Chipset Model: ATY,RadeonX1900
    Type: Display
    Bus: PCIe
    Slot: Slot-1
    PCIe Lane Width: x16
    VRAM (Total): 512 MB
    Vendor: ATI (0x1002)
    Device ID: 0x7249
    Revision ID: 0x0000
    ROM Revision: 113-A52027-140
    EFI Driver Version: 01.00.140
    Displays:
    SyncMaster:
    Resolution: 1920 x 1200 @ 60 Hz
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    Television: Yes
    S/M 955SL:
    Resolution: 1280 x 1024 @ 75 Hz
    Depth: 32-bit Color
    Core Image: Hardware Accelerated
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Quartz Extreme: Supported
    Rotation: Supported
    anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
    also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
    +
    francis.t
    montreal
    Message was edited by: francis.t

    Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
    ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

  • Alittle help with dual-setup with ati radeon 5770

    Hello everyone, I have been trying to setup a dual display with 2 flat panel monitors.
    1. A WestingHouse Digital Electronics "17"
    2. A Goldstar Company Ltd "23" (Main Display)
    Im currently running the gnome desktop, what im trying to setup, is have both the gnome desktop show up on both monitors. For example if I wanted to move something from my main monitor to the smaller one to the left of me, I want to NOT be able to do that, and only have the mouse be able to move accross the 2. 2 Seperate desktops one 2 seperate screens. Im not quite sure what its called, Im thinking maybe its a clone Desktop? Anways, The graphics card Im using is an
    Ati Radeon 5770, has 2 vga ports. I currently have the "video-ati" driver installed and works well with my main screen, but im unable to get my secondary screen (to the left of me) working. I tried going into System>>Preferences>>Monitors, and tried tinkering with the display, and tried enabling the 2 monitors and moving them from left to right, to see if that would possibly let it show up or start to function, but only the main screen works. I generated a new xorg.conf, since I didnt have one prior to installing Arch, I was following these to guides
    http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors
    http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors/ATI
    both are very nice, but Im still not quite understanding yet. Defiantly am trying. I edited my xorg.conf a few times, but got the same results each time, just the screen going blank and X crashing.  I have here a copy of my xorg.conf, Xorg.conf.log, and xrandr output
    Xorg.conf
    http://pastebin.com/hbmdKrfv
    Xorg-logs
    http://pastebin.com/USZvtAMJ  (Im thinking the Vsync and Hsync have something that might help)
    Xrandr
    http://pastebin.com/2cV95Ef4
    Thank you guys!

    An xorg.conf may not be necessary, but I still find it nice to have the control that the file provides.
    In looking over yours, I see several things that could be causing your problems.
    First off,  I notice that you have Screen0  that is using Card0 and Monitor0.  This part looks ok. 
    When I look at Screen1, I notice that you are using  ATI Graphics Adapter1 and Monitor1.   I don't see entries for either of those, although you have an ATI Graphics Atapter2, but there is no entry for your second monitor.
    I also notice that you are trying to use both radeon and fglrx as drivers.  As far as I know (and I don't have an ATI video card at the moment), you can use one driver or the other, but not both.
    After you have these things fixed, then you can put in the Screen section in your server layout to describe the positioning of your second monitor.
    All in all, the issues that you have to fix are minor,  but frusterating if you are too close to the situation. 
    Good luck.

  • Can I replace an ATI RADEON 9800 PRO-(256MB)-MAC EDITION with Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5

    Hi,
    I am trying to help a friend whose graphics card has bust.
    The old one was an ATI RADEON 9800 PRO-(256MB)-MAC EDITION.
    I've been looking on ebay and it seems a lot cheaper to get a Mac ATI Radeon 9800 Pro 128mb Video Card For G4/G5.
    Can I just swap them over?  The connectors are not identical according to the photographs.
    Thanks.

    I'd like to thank everyone for all the really useful information in this thread. It helped me solve a similar problem, which I'll describe here briefly in case it helps someone else.
    I have a 2004/5 dual 2 Ghz PowerPC G5 and an Apple Cinema HD display linked, as I later found out, with the now defunct ADC connector. The display suddenly started to look like that scene in The Matrix, when code falls like rain down the screen, and I worked out I needed to replace my Radeon 9800 pro video card (I discovered the board was blue when I removed a thick layer of dust).
    I took japamac's excellent advice and bought a Geforce 6800 Ultra from the linked eBay seller in Hong Kong, who delivered it extremely quickly, along with the cables to plug it into the DVD drive power source and a CD with installation instructions. It was only then that I realised the card had two DVI connectors and my display needed ADC (I hadn't understood the difference).
    eBay came to the rescue again with a seller who had a secondhand DVI to ADC adapter, which Apple produced  when it phased out ADC about six years ago but no longer sells. It has its own power supply and looks like a large version of the Mac laptop power cables - and has added signifcantly to the pile of spaghetti under my desk.
    Installing the Geforce 6800 Ultra is fiddly, and a bit scary if you're not used to delving into the insides of a Mac, but the instructions were clear and illustrated with useful photos. The video cable has four connectors. Two fit into the end of the card, the other two (linked in a Y shape) form a bridge between the DVD/superdrive and its power cable. You have to remove the DVD drive, unplug it, and then plug one of the two Y video card connectors into the DVD power cable and the other into the DVD drive itself. Then you replace the DVD drive, plug the two remaining cable connectors to the video card and ease it into the old card's AGP slot.
    Finally, with the G5 reassembled, plug the adapter's DVI connection into the back of the card, plug the Cinema Display ADC cable into the adapter block, plug the adapter's USB cable into the G5 (this enables the the USB ports on the back of the display to work), and power up.
    At the time of writing, the display has been up and running for a couple of hours and all seems fine.
    Thanks again everyone for all your help and advice. If it wasn't for communities like this, it would be virtually impossible to solve problems with old but still serviceable Macs.

  • [SOLVED] KDE 4.3 Composite with ATI Radeon X1600 Series

    I'm new to Archlinux (and don't have too much experience on Linux) and searched everywhere in this forum and on Google but couldn't find out how to solve my problem.
    I'm using Archlinux x86_64... my video card is an ATI Radeon X1650 Pro (pretty old) and I can't enable Composite on KDE 4.3 (not KDEMod) to enable transparency and some animation, using OpenGL (with XRender it works, but it also gets extremely slow...)
    Here is my xorg.conf: (on Device section, all Options where added following every website I found on Google... everything else was generated by "Xorg --config" command)
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    Option "AIGLX" "true"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "glx"
    Load "extmod"
    Load "dbe"
    Load "record"
    Load "dri"
    Load "dri2"
    Load "drm"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "abnt2"
    Option "XkbVariant" ",winkeys"
    Option "XkbLayout" "br"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "CorePointer"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    #DisplaySize 410 260 # mm
    Identifier "Monitor0"
    VendorName "HWP"
    ModelName "HP w1907"
    HorizSync 24.0 - 83.0
    VertRefresh 50.0 - 76.0
    Option "DPMS"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "radeon"
    VendorName "ATI Technologies Inc"
    BoardName "RV530LE [Radeon X1600/X1650 PRO]"
    BusID "PCI:4:0:0"
    Option "DRI" "true"
    Option "XAANOOffscreenPixmaps" "true"
    Option "RenderAccel" "true"
    Option "AllowGLXWithComposite" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultColorDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Depth 16
    Modes "1440x900"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1440x900"
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Can anyone help me?
    If anyone needs more information, just tell me which information and how to retrieve it!
    Last edited by hhideki (2009-09-11 21:31:21)

    flamelab wrote:
    Remove everything from your xorg.conf, install xorg-input-drivers, install xf86-video-ati make sure HAL is running,  put these in your xorg.conf
    Section "ServerFlags"
    Option "DontZap" "False"
    EndSection
    Section "Device"
    Identifier "My Graphics Card"
    Driver "radeon"
    Option "DRI" "on"
    Option "ForceLowPowerMode" "on"
    # Option "DynamicPM" "on"
    # Option "ClockGating" "on"
    Option "AccelMethod" "EXA"
    Option "EXAVSync" "on"
    Option "DMAForXv" "on"
    Option "ScalerWidth" "2048"
    Option "EnablePageFlip" "on"
    Option "RenderAccel" "on"
    Option "AccelDFS" "on"
    BusID "PCI:1:0:0"
    EndSection
    Section "ServerFlags"
    Option "DontZap" "False"
    EndSection
    and then restart HAL and restart Xorg.
    Done.
    Didn't work
    After doing what flamelab posted, X didn't start...
    Here is the content of /var/log/Xorg.0.log:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux arch 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 16:06:45 CEST 2009 x86_64
    Build Date: 04 September 2009 05:45:43PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 11 13:47:48 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (==) No screen section available. Using defaults.
    (**) |-->Screen "Default Screen Section" (0)
    (**) | |-->Monitor "<default monitor>"
    (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    (**) | |-->Device "My Graphics Card"
    (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    (**) Option "DontZap" "False"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (--) using VT number 7
    (--) PCI:*(0:4:0:0) 1002:71c6:18bc:2712 ATI Technologies Inc RV530LE [Radeon X1600/X1650 PRO] rev 0, Mem @ 0xc0000000/268435456, 0xdfff0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    (--) PCI: (0:4:0:1) 1002:71e6:18bc:2713 ATI Technologies Inc RV530LE [Radeon X1650 PRO] (Secondary) rev 0, Mem @ 0xdffe0000/65536
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3.901, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 6.12.2
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
    ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
    ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
    ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
    ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
    ATI Mobility RADEON M98, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
    ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
    ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
    ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
    ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD Graphics, ATI Radeon Graphics,
    ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
    ATI Radeon Graphics
    (II) Primary Device is: PCI 04@00:00:0
    (EE) No devices detected.
    Fatal server error:
    no screens found
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    With the current xorg.conf (the one showed in the first post), /var/log/Xorg.0.log is like this:
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    X.Org X Server 1.6.3.901 (1.6.4 RC 1)
    Release Date: 2009-8-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.30-ARCH x86_64
    Current Operating System: Linux arch 2.6.30-ARCH #1 SMP PREEMPT Mon Aug 17 16:06:45 CEST 2009 x86_64
    Build Date: 04 September 2009  05:45:43PM
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 11 13:51:45 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "X.org Configured"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "Card0"
    (**) |-->Input Device "Mouse0"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
        Entry deleted from font path.
    (WW) The directory "/usr/share/fonts/Type1" does not exist.
        Entry deleted from font path.
    (**) FontPath set to:
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        /usr/share/fonts/misc,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/TTF,
        built-ins
    (**) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse0
    (WW) Disabling Keyboard0
    (II) Loader magic: 0x1d40
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 5.0
        X.Org XInput driver : 4.0
        X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0:4:0:0) 1002:71c6:18bc:2712 ATI Technologies Inc RV530LE [Radeon X1600/X1650 PRO] rev 0, Mem @ 0xc0000000/268435456, 0xdfff0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
    (--) PCI: (0:4:0:1) 1002:71e6:18bc:2713 ATI Technologies Inc RV530LE [Radeon X1650 PRO] (Secondary) rev 0, Mem @ 0xdffe0000/65536
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [17] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [18] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [19] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [21] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [22] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [23] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.6.1, module version = 6.12.2
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 5.0
    (II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
        ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
        ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
        ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
        ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
        ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
        ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
        ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
        ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
        ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
        ATI Mobility RADEON M98, ATI Radeon 4800 Series,
        ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
        ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
        ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
        ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
        ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
        ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
        ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
        ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
        ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
        ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
        ATI Mobility Radeon HD 3850 X2, ATI RV670,
        ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
        ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
        ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
        ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
        ATI Mobility Radeon 4500 Series, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE,
        ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
        ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
        ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
        ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
        ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
        ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
        ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
        ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
        ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
        ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
        ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
        ATI Radeon HD Graphics, ATI Radeon Graphics,
        ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
        ATI Radeon Graphics
    (II) Primary Device is: PCI 04@00:00:0
    (II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [17] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [18] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [19] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [21] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [22] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [23] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
        [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
        [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
        [19] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [20] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [21] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [22] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [23] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [24] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [25] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [26] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [27] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
        [28] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
    (II) RADEON(0): TOTO SAYS 00000000dfff0000
    (II) RADEON(0): MMIO registers at 0x00000000dfff0000: size 64KB
    (II) RADEON(0): PCI bus 4 card 0 func 0
    (**) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (**) RADEON(0): Option "RenderAccel" "true"
    (**) RADEON(0): Option "DRI" "true"
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 0.1.0
        ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1650" (ChipID = 0x71c6)
    (WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
    (--) RADEON(0): Linear framebuffer at 0x00000000c0000000
    (II) RADEON(0): PCIE card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        ABI class: X.Org Video Driver, version 5.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
        SubsystemVendorID: 0x18bc SubsystemID: 0x2712
        IOBaseAddress: 0xe800
        Filename: K6QGA7D2.I1H
        BIOS Bootup Message:
    RX165PGE2-D3 I1H                                                           
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 601000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    [drm] failed to load kernel module "radeon"
    (EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
    [dri] Disabling DRI.
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) RADEON(0): Max desktop size set to 2560x1600
    (II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
    (II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 601.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
    (II) RADEON(0): Skipping TV-Out
    (II) RADEON(0): Skipping Component Video
    encoder: 0x15
    encoder: 0x13
    encoder: 0x16
    encoder: 0xf
    (II) RADEON(0): Output DVI-1 using monitor section Monitor0
    (II) RADEON(0): I2C bus "DVI-1" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
      XRANDR name: DVI-1
      Connector: DVI-I
      CRT2: INTERNAL_KLDSCP_DAC2
      DFP1: INTERNAL_KLDSCP_TMDS1
      DDC reg: 0x7e50
    (II) RADEON(0): Port1:
      XRANDR name: DVI-0
      Connector: DVI-I
      CRT1: INTERNAL_KLDSCP_DAC1
      DFP3: INTERNAL_LVTM1
      DDC reg: 0x7e40
    (II) RADEON(0): I2C device "DVI-1:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-1:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    finished output detect: 0
    (II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: HWP  Model: 26a2  Serial#: 2147483648
    (II) RADEON(0): Year: 2007  Week: 8
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync:  Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 41  vert.: 26
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.650 redY: 0.340   greenX: 0.290 greenY: 0.610
    (II) RADEON(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x870@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) RADEON(0): #1: hsize: 1152  vsize 720  refresh: 60  vid: 113
    (II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
    (II) RADEON(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
    (II) RADEON(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
    (II) RADEON(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: HP w1907
    (II) RADEON(0): Serial No: CNN70832Y0
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0):     00ffffffffffff0022f0a22600000080
    (II) RADEON(0):     0811010368291a782e8585a6574a9c26
    (II) RADEON(0):     125054a56b8081807100814095000101
    (II) RADEON(0):     0101010101019a29a0d0518422305098
    (II) RADEON(0):     360098ff1000001c000000fd00324c18
    (II) RADEON(0):     530e000a202020202020000000fc0048
    (II) RADEON(0):     502077313930370a20202020000000ff
    (II) RADEON(0):     00434e4e373038333259300a202000e1
    finished output detect: 1
    finished all detect
    before xf86InitialConfiguration
    (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 1
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: HWP  Model: 26a2  Serial#: 2147483648
    (II) RADEON(0): Year: 2007  Week: 8
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
    (II) RADEON(0): Sync:  Separate
    (II) RADEON(0): Max Image Size [cm]: horiz.: 41  vert.: 26
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
    (II) RADEON(0): Default color space is primary color space
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.650 redY: 0.340   greenX: 0.290 greenY: 0.610
    (II) RADEON(0): blueX: 0.150 blueY: 0.070   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x870@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
    (II) RADEON(0): #1: hsize: 1152  vsize 720  refresh: 60  vid: 113
    (II) RADEON(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
    (II) RADEON(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
    (II) RADEON(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
    (II) RADEON(0): v_active: 900  v_sync: 903  v_sync_end 909 v_blanking: 934 v_border: 0
    (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 140 MHz
    (II) RADEON(0): Monitor name: HP w1907
    (II) RADEON(0): Serial No: CNN70832Y0
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0):     00ffffffffffff0022f0a22600000080
    (II) RADEON(0):     0811010368291a782e8585a6574a9c26
    (II) RADEON(0):     125054a56b8081807100814095000101
    (II) RADEON(0):     0101010101019a29a0d0518422305098
    (II) RADEON(0):     360098ff1000001c000000fd00324c18
    (II) RADEON(0):     530e000a202020202020000000fc0048
    (II) RADEON(0):     502077313930370a20202020000000ff
    (II) RADEON(0):     00434e4e373038333259300a202000e1
    (II) RADEON(0): EDID vendor "HWP", prod id 9890
    (II) RADEON(0): Output DVI-1 disconnected
    (II) RADEON(0): Output DVI-0 connected
    (II) RADEON(0): Using user preference for initial modes
    (II) RADEON(0): Output DVI-0 using initial mode 1440x900
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
    (==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using XAA acceleration architecture
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.6.3.901, module version = 1.2.1
        ABI class: X.Org Video Driver, version 5.0
    (!!) RADEON(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
        [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
        [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
        [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
        [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
        [16] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
        [17] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
        [18] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
        [19] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [20] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [21] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [22] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [23] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [24] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [25] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
        [26] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
        [27] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
        [28] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) RADEON(0): RADEONScreenInit c0000000 0 0
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0):   mem_size         : 0x10000000
    (II) RADEON(0):   MC_FB_LOCATION   : 0xcfffc000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Memory manager initialized to (0,0) (1472,8191)
    (II) RADEON(0): Reserved area from (0,1440) to (1472,1442)
    (II) RADEON(0): Largest offscreen area available: 1472 x 6749
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xcfffc000 0xcfffc000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (WW) RADEON(0): Direct rendering disabled
    (II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
    (II) RADEON(0): Render acceleration disabled
    (II) RADEON(0): num quad-pipes is 1
    (**) RADEON(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Scanline Image Writes
        Setting up tile and stipple cache:
            32 128x128 slots
            32 256x256 slots
            16 512x512 slots
    (II) RADEON(0): Acceleration enabled
    (**) Option "dpms"
    (**) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00819000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x0081f000
    (II) RADEON(0): Largest offscreen area available: 1472 x 6741
    (II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output CRT1 disable success
    Mode 1440x900 - 1904 934 6
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xcfffc000 0xcfffc000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    freq: 106500000
    best_freq: 106500000
    best_feedback_div: 71
    best_ref_div: 2
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 106500, PLL 106500
    (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x47(71), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    Output CRT1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Mode 1440x900 - 1904 934 6
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0):   MC_FB_LOCATION   : 0xcfffc000 0xcfffc000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    freq: 106500000
    best_freq: 106500000
    best_feedback_div: 71
    best_ref_div: 2
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 106500, PLL 106500
    (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x47(71), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output DAC1 setup success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 enable success
    (WW) RADEON(0): Option "AllowGLXWithComposite" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 408 x 255
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.6.3, module version = 2.2.5
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device HID 04f3:0087
    (**) HID 04f3:0087: always reports core events
    (**) HID 04f3:0087: Device: "/dev/input/event6"
    (II) HID 04f3:0087: Found 9 mouse buttons
    (II) HID 04f3:0087: Found x and y relative axes
    (II) HID 04f3:0087: Found scroll wheel(s)
    (II) HID 04f3:0087: Found keys
    (II) HID 04f3:0087: Configuring as mouse
    (II) HID 04f3:0087: Configuring as keyboard
    (**) HID 04f3:0087: YAxisMapping: buttons 4 and 5
    (**) HID 04f3:0087: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "HID 04f3:0087" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (**) HID 04f3:0087: (accel) keeping acceleration scheme 1
    (**) HID 04f3:0087: (accel) filter chain progression: 2.00
    (**) HID 04f3:0087: (accel) filter stage 0: 20.00 ms
    (**) HID 04f3:0087: (accel) set acceleration profile 0
    (II) HID 04f3:0087: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) RADEON(0): Output: DVI-1, Detected Monitor Type: 0
    Dac detection success
    Unhandled monitor type 0
    (II) RADEON(0): EDID vendor "HWP", prod id 9890
    (II) RADEON(0): Using hsync ranges from config file
    (II) RADEON(0): Using vrefresh ranges from config file
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    (II) RADEON(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    (II) RADEON(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    (II) RADEON(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
    (II) RADEON(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
    (II) RADEON(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
    (II) RADEON(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    (II) RADEON(0): Modeline "1152x720"x60.0   67.32  1152 1208 1328 1504  720 721 724 746 -hsync +vsync (44.8 kHz)
    (II) RADEON(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
    (II) RADEON(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
    (II) RADEON(

  • Xorg7 Problem with ATI driver?

    After upgrade my X sever crash  :cry:
    I see a error message saying something like this:
    (II) Loading sub module "radeon"
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 4.0.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.8
    (WW) ****INVALID IO ALLOCATION**** b: 0x3000 e: 0x30ff correcting
    (II) window:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) resSize:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) IX[B]
    (II) window fixed:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
    Requesting insufficient memory window!: start: 0x0 end: 0xffff size 0xd0220100
    (EE) Cannot find a replacement memory range
    (II) resource ranges after probing:
    [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [5] -1 0 0xd0210000 - 0xd02100ff (0x100) MX[B]
    This is my xorg.conf file:
    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/75dpi"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
        Load  "record"
        Load  "xtrap"
        Load  "glx"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "type1"
    EndSection
    Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
    EndSection
    Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option        "Protocol" "IMPS/2"
        Option        "Device" "/dev/input/mice"
        Option        "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
        #DisplaySize      320   240    # mm
        Identifier   "Monitor0"
        VendorName   "STN"
        ModelName    "S/T 77E/76E"
    ### Comment all HorizSync and VertSync values to use DDC:
        HorizSync    30.0 - 70.0
        VertRefresh  50.0 - 160.0
        Option        "DPMS"
    EndSection
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
            ### [arg]: arg optional
            #Option     "NoAccel"                # [<bool>]
            #Option     "SWcursor"               # [<bool>]
            #Option     "Dac6Bit"                # [<bool>]
            #Option     "Dac8Bit"                # [<bool>]
            #Option     "BusType"                # [<str>]
            #Option     "CPPIOMode"              # [<bool>]
            #Option     "CPusecTimeout"          # <i>
            #Option     "AGPMode"                # <i>
            #Option     "AGPFastWrite"           # [<bool>]
            #Option     "AGPSize"                # <i>
            #Option     "GARTSize"               # <i>
            #Option     "RingSize"               # <i>
            #Option     "BufferSize"             # <i>
            #Option     "EnableDepthMoves"       # [<bool>]
            #Option     "EnablePageFlip"         # [<bool>]
            #Option     "NoBackBuffer"           # [<bool>]
            #Option     "DMAForXv"               # [<bool>]
            #Option     "PanelOff"               # [<bool>]
            #Option     "DDCMode"                # [<bool>]
            #Option     "MonitorLayout"          # [<str>]
            #Option     "IgnoreEDID"             # [<bool>]
            #Option     "UseFBDev"               # [<bool>]
            #Option     "MergedFB"               # [<bool>]
            #Option     "CRT2HSync"              # [<str>]
            #Option     "CRT2VRefresh"           # [<str>]
            #Option     "CRT2Position"           # [<str>]
            #Option     "MetaModes"              # [<str>]
            #Option     "MergedDPI"              # [<str>]
            #Option     "MergedXinerama"         # [<bool>]
            #Option     "MergedXineramaCRT2IsScreen0"     # [<bool>]
            #Option     "MergedNonRectangular"     # [<bool>]
            #Option     "MergedMouseRestriction"     # [<bool>]
            #Option     "DisplayPriority"        # [<str>]
            #Option     "PanelSize"              # [<str>]
            #Option     "ForceMinDotClock"       # <freq>
            #Option     "ColorTiling"            # [<bool>]
            #Option     "VideoKey"               # <i>
            #Option     "RageTheatreCrystal"     # <i>
            #Option     "RageTheatreTunerPort"     # <i>
            #Option     "RageTheatreCompositePort"     # <i>
            #Option     "RageTheatreSVideoPort"     # <i>
            #Option     "TunerType"              # <i>
            #Option     "RageTheatreMicrocPath"     # <str>
            #Option     "RageTheatreMicrocType"     # <str>
            #Option     "RenderAccel"            # [<bool>]
            #Option     "SubPixelOrder"          # [<str>]
            #Option     "ShowCache"              # [<bool>]
            #Option     "DynamicClocks"          # [<bool>]
            #Option     "BIOSHotkeys"            # [<bool>]
            #Option     "VGAAccess"              # [<bool>]
            #Option     "ReverseDDC"             # [<bool>]
            #Option     "LVDSProbePLL"           # [<bool>]
            #Option     "AccelMethod"            # <str>
        Identifier  "Card0"
        Driver      "ati"
        VendorName  "ATI Technologies Inc"
        BoardName   "Radeon RV100 QY [Radeon 7000/VE]"
        BusID       "PCI:4:2:0"
    EndSection
    Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
            Viewport   0 0
            Depth     1
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     4
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     8
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     15
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     16
        EndSubSection
        SubSection "Display"
            Viewport   0 0
            Depth     24
        EndSubSection
    EndSection

    I hada problem with ATI in my xorg 7 and my solution was to change the xorg.conf driver to ...vesa.
    I don't know if your card supports fglrx but I suspect it may not and the ati-drivers are for that function.
    Just a thought...

  • PPC G5 with ATI Radeon 9600 Pro monitors not getting signal

    hi there.
    I have a PPC G5 with ATI Radeon 9600 Pro graphics card and I cannot get a monitor to work properly. I am trying an old Apple Studio Display (circa 2001) and a Viewsonic VA520.
    It seems like the Apple display should work, but all I get is a black screen. I ran it through a DVI to ADC adapter and had it working for a short period of time, but for some unknown reason it went back to the black screen.
    The Viewsonic gives a 'NO SIGNAL' screen and not much else.
    Both of these monitors have worked on other G5's. I am guessing this is a graphics card issue.
    I appreciate any kind or helpful words! Thank you.

    I'm having a similar problem with the G5 not recognizing a VGA monitor on either video out. I have no problem using two monitors with the DVI inputs but I need to use a VGA video splitter for a third screen. It worked at the beginning of this week, and now it refuses any VGA out, even without the splitter, just going into directly into the VGA in of one of my working monitors via a DVI-VGA adapter(i've tried different ones). I read another post about trashing "displays" and "windowserver" preference files but i haven't yet tried that..any clues??

  • K7D Master-L with ATI Radeon 7000

    Is anyone using K7D Master-L with ATI Radeon 7000? I am not able to use this
    combination. When I switch on the power, the screen doesn't show antying. It is just
    blank.  Even though the monitor doesn't show up, if I don't press any key then the
    system goes further till I see all the 4 leds as green and it tries to read from the
    floppy drive. However, if I press a key after the keyboard is initialized, then the
    d-bracket stops at Testing VGA BIOS. I haven't installed my hard drive at this stage.
    MSI support asked me to try with another graphics card. They also suggested clearing
    CMOS. I cleared the CMOS and the problem still exists. In addition, now the d-bracket
    stops at "Initializing hard drive controller" though I didn't install hard drive. So, I went
    ahead and installed my 200GB hard drive and no change. I think, to fix this issue, I
    should first be able to fix my VGA issue. Also note that as I can't see the monitor from
    the beginning, I don't know what my BIOS version is and if I can flash it with the latest
    version.

    I just tried with Creative Lab's "3D Blaster Savage4 32MB AGP (32MB SDRAM) "   CT6900 which I borrowed from a friend. It didn't work either though this card is supposed to support AGP 2x/4x.  I need to see what other cards I can get hold of
    and try.
    However, as I mentioned, initially the sequence was complete and I could see the 4 leds showing green. But after the advice from MSI tech support to try clearing CMOS for this problem, now the sequence stops at "Initiating Hard Drive Controller" (red red green green). Could this be because the BIOS doesn't know the HDD details after resetting CMOS? If so, once I get my VGA problem resolved will I be able to solve this problem
    by entering into BIOS setup? At what stage does the BIOS setup screen show up when I press 'Del' key? If it is after the entire POST sequence then I will be stuck at the hard drive initialization. Also, I read that AMI BIOS supports Ins key which will bypass CMOS setup in the case. Does AWARD BIOS has any such functionality?

Maybe you are looking for

  • How can I transfer mov files from my iphone4 to PC without corrupting them?

    I transferred my photos and videos from my iphone4 to my PC to make more room on my phone. After deleting the files from my phone, I realized that the mov files are corrupted. The videos mostly show grey blotches with no sound. I have tried syncing t

  • Xslt mapping - xsl if ?

    HI, can you explain me "how to use the xsl if function" ? My source is an ORDRSP Idoc and i want to use the following. IF E1EDP20 is existing then .... and IF E1EDP20/WMENG = 0 then ... anyway... is there an option to test the xslt mapping with XML s

  • Weblogic.kernel.Default not using all threads

    We are running weblogic 8.1 sp4 on HP Tru64 5.1. We have an admin server and 3 managed servers in a cluster. When monitoring the weblogic.kernal.Default execute threads through the weblogic console, threads 0 to 15 have zero total requests, and the u

  • OSX 10.9 w/Mavricks Disk Not Ejecting Properly notification

    Have several WD My Book external drives, since installing mavricks the Disk Not Ejecting Properly noftifaction pops up 10 times a day an dthe drives dismount... a real pain... seems to be a BUG  !!!!  Bugs in apples are annoying.

  • Rac loadbalancing/failover - services

    I have seen some DBA's creating 2 services for every rac database for example in a 2 node rac they would have. Svcprd1 prefered node: node 1 available node:node2 Svcprd2 prefered node: node2 available node:node1 What's the difference between above an