K8N Diamond Bios update from 1.7 to 1.9 is it recommended?

I just checked bios page and it shows a revision for opteron cpu's for rev 1.8 should I update the bios. Anyone using 1.8 or 1.9?

As to ow to flash, please refer to:
http://www.msi.com.tw/program/service/faq/faq/esc_faq_list.php?L_kind=1&L_CHIP=all

Similar Messages

  • Where can I dowload bios update from hp website?

    As I need a bios update to do my bios recovery on my tablet which is now black screen issue by updating new bios update. However, now hp removed bios update from its driver download page. Please help to provide me the new link for this download. Thanks!

    Hey , Welcome to the HP forums. Without knowing which product you have I cannot provide you any links or information about BIOS updates. For information on finding your product or model number click here: Finding Your HP Product Model Number. Thanks.

  • 6710b notebook bios update from F.0B to F.10 or above

    I have 3 HP notebooks here - all 6710b. All have XP Pro SP3 installed on them on replacement hard drives (no HP restore partition).Two of them have BIOS version F.0B and the third had version F.10.I downloaded the HPQFlash update for F.20 from the HP support site and ran it on the F.10 notebook as it wasn't fully installed and I could use it as a test machine.Everything went swimmingly well. It updated without a hitch and runs just fine. However, trying to update the other HP notebooks from F.0B to F.10 or higher. there doesn't appear to be a way to do it.
    The HPQFlash utility (for F.20) tells me its not compatible and to update to at least F.10.
    Earlier BIOS updates tell me to "Copy the SoftPaq to the file store". What *IS* "the file store" and there's no "softpaq" anything with the download???? That's where the RTF instructions just stop - there is no further info on what to do.They also say "This package is used to flash the System ROM on target notebooks in a network" - these laptops are stand-alone and do not/will not connect to a network and as far as I know they do not have SSM.
    The instructions are not clear on what to do.The support pages just tell me to follow the instructions and voila - your BIOS update is complete!It has no help when the update will not do what it's meant to do or if it fails. Typical HP!
    I have a DOS bootable USB stick and can boot from it to run other DOS-related stuff.
    I can run the Rompaq exe and it will save the current bios but when I try to update it, it tells me it cannot read the media and I have no option but to abort the process.
    So now I'm stuck!
    Any suggestions on how to get from F.0B to F.10 or higher so I can run the HPQFlash to F.20??

    Chris_82 wrote:
    The HP Support Assistant application is recommending me to update the bios from my current F.12 version to F.17.
    After reading several posts about my laptop model being "bricked" up after trying to install earlier bios versions from HP (F.15) I'm reluctant to update the version I now have.
    Is there any benefit to updating to the F.17 version?
    Has anyone had any problems going from F.12 to F.17?
    Thanks,
    Chris Hutchinson
    F.17 resolved the issue where the BIOS upgrade fails.  It should be safe to run.  If you're not having any problems, I'd probably hold off until a later BIOS comes out that includes fixes/enhancements.

  • How do you delete bios update from computer?

    i installed the bios update for my touchsmart 310-1125f computer and now i want to delete it cause i dont have the blue hp screen that appears when i turn on my computer.   i get a black screen with stuff on it and F10 setup message at bottom of screen.  i tried to use my recovery discs that i made but i get a message saying that the discs arent for my computer.  ive used the discs several times before without any problem.  i contacted hp about the problem and theyre sending me some recovery discs but i doubt theyll work  cause the ones i made wont work now.  the person from hp told me to press F11 when i start my computer.  I did that and it started to do a recovery of factory restore image  i thought my discs were working but it never asked to insert disc 2.   i have an  hp pavilion computer that has windows 7 on it and before windows 7 was put on it i did a bios update on that and i never had a problem with a black screen with stuff on it appearing.  The black screen on the touchsmart computer is really annoying i liked the hp blue screen with the stuff on the bottom of it better.  Any help would be greatly appreciated.  Thanks

    What computer are you using?

  • Bios update from 1.60 to 1.70 on Satellite Pro A300

    Satellite Pro A300 got new infromation from Toshiba Tempro that there are new
    bios available. I was downloaded and upgrading bios from 1.60 to 1.70. The problem are
    that machine going totally JAM middle of bios upgrade. InsydeFlash show that bios upgrade
    are going "Erasing and writing" but nothing happened. Machine is totally JAM!
    What I can do now? I have power on machine and not yet rebooted from power key because
    I fraid that bios update is not ready yet.
    PLEASE HELP ASAP!

    Hello
    Please contact nearest authorized service provider and ask for help.
    If BIOS update is not done well the BIOS chip can be damaged and notebook will be death.
    Contact them and explain the situation. They will help you.
    By the way: what do you mean with JAM? Is notebook going OFF in the middle of BIOS update?
    Have you switched it OFF?
    What was happening exactly?

  • X58 Pro BIOS update from 7.3 to 8.x

    Hi.
    I've thought of updating my the bios of my X58 PRO but I've hesitated as I'm not sure if the new 8.x bios versions are meant for my mb. 8.e is the latest I think.
    I was wondering if anyone on the forum had any experience on the subject? I saw one old thread with someone thinking the same thing but wasn't quite sure how it worked out for him.

    Well atm I'm having problems with my DVD-drive giving me DMA errors whenever I'm trying to burn a DVD. I've looked into the matter and nothing seems to be helping so I thought of updating the BIOS.
    Even though a BIOS update might not help with my current problem, I'm still interested to know whether it is possible to update BIOS from 7.3 to 8.e.
    I read from somewhere that this was not adviced because 8.x versions are meant for X58 PRO SLI
    MSI automatic updating also didn't even suggest any updates for my BIOS. I know not to flash from MSI LiveUpdate, I just ran it to check for updates.

  • BIOS update from bootable CD

    Hi everyone!
    It is probably a stupid question but I hope to become less stupid by asking it:
    How do you create a bootable cd for BIOS upgrade with the files provided in the support area of this website???
    precisely with this file here...
    http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp?service=EU
    ...how do I do that???
    Option 2: Update with CD-ROM
    1. Extract the zip file containing the BIOS upgrade to a temporary folder.
    2. In the temporary folder three sub folders will be generated. "docs", "Update - 3,5' Disk",
    "Update - CD-R or CD-RW"
    3. How to make a bootable CD-ROM please read the *.pdf file in the "docs" folder.
    this tutorial is taken from this website as well. And the Qosmio G50 isn't listed anywhere on the page even though its BIOS update downloading page was pointing to it.
    When I download the file i only get a zip containing an *.exe file which I anyway can't run since I am not on my broken Toshiba (wouldn't have to upgrade bios from boot otherwise)
    Can somebody help me being less stupid^^please?

    ^^You must understand that I don't want you to read all my postings. Neither did I mean to be rude by thinking "Go fetch my link and help me out!" I was just afraid that later, someone wanting to read about BIOS upgrade would read my thread and would end up reading about a guy's problem to install OS. That is why I posted the link. To avoid any digression and to stay as clear as possible regarding my request of BIOS update information...
    I had some people telling me to try a bios update.
    BIOS updates are sometimes related and needed to 7 installation on some particular laptop models.You can find the list somewhere on toshiba's website.
    But you are right Qosmio G50-12f is not listed by Toshiba as needing a bios update before installing 7. and it's pretty recent too.
    I am not willing to play around with my bios.And you just comforted me that I shouldn't have to!
    but well, just for the sake of knowledge, do you think there is a particular reason why not to make this update available from a boot option? Which seems to me a pretty useful feature in some cases...
    Anyway, thanks a lot for your advices!!

  • H61I-E35 (B3) BIOS Update from 5+ to 6 version.

    Hello,
    1. When I firstly wanted to Upgrade from 5.2 to Version 6.0 that was on 01.06.2012 I was FAILED.
    I have putted USB stick in Front USB port (on my case) and launched EXE file from USB FLash and got:
    BIOS Updating ________ File not Found Message.
    I went to my Service and they reflash bios on this M/B to 5.2 version.
    For Now I have 5.2 BIOS version on my Mobo.
    You can see details in this topic: https://forum-en.msi.com/index.php?topic=159364.msg1169080#msg1169080
    2. Now I want to buy Ivy Bridge processor for my PC.
    I need to upgrade my 5.2 version to 6.3 located in http://www.msi.com/product/mb/H61I-E35--B3-.html#/?div=BIOS
    So here is my questions:
    2.1 Please could you provide me steps to complete this action?
    3.1.As I see for now, I can Download bios (exe file) put in root directory on flash (FLAS INSERTED INTO BACK!! NOT FRONT!!! USB port)
     and launch exe and after reboot Bios will be updated.
    3.2. Second variant is to use https://forum-en.msi.com/index.php?topic=161145.msg1181017#msg1181017 described method
    So, please advice, how to flash my mobo!!
    Thanks in advance!

    There are several ways to update.
    You can use the MSI package:
    http://www.msi.com/product/mb/H61I-E35--B3-.html#/?div=BIOS
    Look for the SOP in the description how to use the utility.
    Safer way is to use the Forum Flasher: >>Use the MSI HQ Forum USB flasher<<
    Use the attached archive and use mode 1 of the flasher. Do not extract the archive.

  • Satellite L300 does't run after BIOS update from V2.10 to V2.20

    Hi
    I just installed BIOS V2.20 over the Bios V2.10 for my Toshi Satellite L300 over Windows XP.
    Afterwerwards the Machine starts and shows just the XP starting window and the restart that I have the options save restart or normal restatr.
    Nothing runs any more? Even starting from Windows-CD has no effect.
    Who can help?

    Thanks for you suggestions, but F2 did not help.
    I performed the Bios update because on the website of Toshiba, there was written, hat the update increases function of the system.
    I just called the update service. They mentioned I should reinstall Win XP, because my Computer starts, but Windows is not starting.

  • Computer won't boot after last BIOS update from Toshiba.

    It was working fine before the update.  Shut down and can't boot; blank screen with blinking cursor.  I have followed the suggestions of getting into the computer but the HDD cannot be found.  Finally got into BIOS but when I run repair I get error: 08-0E89-0000---Partition Creation Failed.  Any help would be greatly appreciately. I have a Satellite A665-S6086 running Win 7 Home 64-bit.

    Thanks Peter for your reply but that is a non-issue now as I purchased a new HD WD750 Black to replace the one I was having problems with and the recovery worked fine, so I thought.  When the computer goes to sleep or hibernate, I don't know which the HD fails on waking.  I was going to try recovery again but instead I reseated the HD and it booted.  This has happened a couple times since the initial 'fail' but seems to Restart fine.  but I have only done it once.  Of course all of these problems started after BIOS 2.30 update last week.
    BTW I had tried all the steps provided to other members having the same problem (Puppy, recovery disk, pressing 0 and removing battery while holding something down) but was getting nowhere and it seemed to me that all HDs can't all fail at once.  So that's why I added the part about the BIOS update that no one seemed to acknowledged.  computer working, install update and restart and the HD failed; yes to me it was questionable.  Additionally, judging by some of the repair technics it is assumed that we members are more advanced or that buy our recovery disk will fix the problem but it does not fix every problem especially if the HD is not recognized. But what do I know.

  • K8n NEO4 bios update to 1D: audigy + pci modem = no start (not even video signal

    I updated my old 1.4 bios (alredy updated once) to 1D. The system was running fine but i was preparing for dual core update.
    After bios update the neo4 was like dead. Not even video signal.
    I removed both SB audigy and pci adsl modem and it started as usual.
    If i add 1 pci card only (audigy OR PCI modem) the system works, while if i add BOTH the cards it is dead.
    Changing slots did not solve the problem.
    System is running with defaults values.
    Any bios setting? do i have to go back to 1.4, 1.5 or 1.6 bios to use an athlon 64 X2 4800+?
    Thx

    Modded bios doesn't add cpu id code .
    murdoK has a mod of 7125 here : http://msi-forum.de/thread.php?threadid=24337
    4800 X2 supported since 1D according to this :
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=637&kind=1

  • Bios update K8N diamond live update give old ver.

    When i want to update bios in LIVE UPdate it say last ver is 1.7 but if i look in download files for moterboard on web there is ver 1.8 but i dont have fllopy on my pc....

    live update will flash it for you, no floppy necessary
    if you are skeptical of liveupdate for some reason, you can use winflash
    either will work, just remember to clear your cmos on the next bootup

  • P6N Diamond BIOS update went very wrong.

    Just updated my P6N Diamond to BIOS 1.3. The procedure went through without a any errors from a floppy disk.
    On reboot there is no post at all. no beeps, no video signal. Everything powers on and the fans come on but no post at all even the 4 lights on the D-Bracket are off.
    Is it completely unrecoverable?
    MSI P6N Diamond
    Intel Core 2 Duo E6850
    4 GB OCZ Ram
    MSI Geforce 8800 Ultra OC
    Thermaltake 1200W PSU
    2 x 500GB Western Digital HD
    Windows Vista 64 Bit

    Quote from: Arramond on 28-November-07, 16:54:19
    This was the bios i got
    http://download6.msi.com.tw/files/downloads/bos_exe/7320v13.zip
    I have tried several times with the clearing of the cmos but I will try with different RAM.
    Also in the recovery procedure I assume I will need a PS2 keyboard as the USB keyboard I have doesn't work holding down ctrl-home?
    "This was the bios i got
    http://download6.msi.com.tw/files/downloads/bos_exe/7320v13.zip
    seems to be correct one.
    "Also in the recovery procedure I assume I will need a PS2 keyboard as the USB keyboard I have doesn't work holding down ctrl-home?"
    yes, use PS2 keyboard.
    "I have tried several times with the clearing of the cmos but I will try with different RAM."
    Power cord removed from the PSU? Just one mem. stick in 1st DIMM near to CPU socket too?
    If no change try with different stick.

  • HP Elitebook 755 G2 BIOS Update from local media not starting

    Hi All, I'm having a really annoying issue with these Elitebooks and need some help. We are trying to update the BIOS manually via USB. I have the EFI and Signature file in the location: Hewlett-Packard\BIOSUpdate and I have the BIN file located in: Hewlett-Packard\BIOS\New Now this is exactly where the BIOS is telling me to put these files on the USB. However whenever I click the accept button to start the update, it will freeze for a few seconds before returning to the main menu. The directory is right, and I've formatted the USB to FAT32 so that isn't an issue. I'm struggling to understand why it can't start the process. The USB is detected because you can see it when you go to select a method to boot from. Thanks,Josh

    There is no need to change the boot mode to legacy.  Your description tells me that you must be in a business environment.  I do find it interesting that your encryption causes issues with booting into Windows.  I have no offhand idea as to what METech software is.  Why not just remove the original hard disk temporarily and replace it with a hard disk that has a vanilla  Windows OS on it? That will take the encrytion issue out of the equation. Once you have updated the BIOS you can put the original disk back in place. If you have numerous notebooks to update doing it this way should simplify things for you.  After all, BIOS is firmware on a chip, not software on a hard disk.

  • Noisy fan after bios update from F13A to F23 on dv6-3102sg (win7 x64 ultimate)

    Hi all,
    After updating firmware on my dv6-3102sg from F13A to F23 the fan is very noisy after login at windows 7 x64 ultimate (fan goes to near 100%).
    CPU, network, hdd load @ near 0% and CPU temperature ~ 30°C (~90°F) but the fan is noisy.
    I tried a lot of things (f.e. uninstalling new installed software/driver, some bios settings, ...) but after downgrading firmware back to F13A solved the problem.
    I'm a little bit angry, because I also have bluetooth problems with F23 (see link) and has bitlocker problems with F13A and F23 (see link).
    I hope any pro is here that can help (sorry for bad englisch).
    Best regards
    Patrick

    can any one help me in McPAT simulator? sorry Im writing here, i dont have time to search where the appropriate place to ask for help

Maybe you are looking for