K8N Diamond Broken Sli switch

Hello,
I recently had problems seeing no signal on my screen. After checking psu,gpu which all work fine on another pc i noticed that the little plastic thing coming from the motherboard that was holding the small sli switch board was broken and now it doesnt sit horizontially as it should and im thinking this is what is causing me the problems. I dont have a second video card so i dont need sli enabled. Do you have any suggestions on how i can secure that thing into place?

Use a bit of glue or try with a ty-rap to hold it down somehow.

Similar Messages

  • A broken Sli switch card and my story...

    Hello evey1, first post here, that's my story:
    got my new PC in august, firstly i was really happy...then some probs occured like lockups in games , etc, all solved at a point....when i decided to use the sli feature and add another MSI 6600GT...my mobo is MSI K8N SLI PLATINUM....so i turned the sli switch card 180 degrees put it into position but what happened? the little hook keeping the turnable liitle card just got out of his position, thus, installing the second 6600GT but after a while it hoped out of its position like something that was holding it in position had broken something...so i gave up{ games werent that good after all} sold the second VGA and gave it for service at a shop.There the guy confirmed that something had broken, and sticked the hook into position with , i could say a mod...the prob is that from that time i formated XP for various reasons {SP1=>SP2} and here I am......
    Now this is my problem: at random occasions{and i mean really random, like once or twice a week} when I open the pc cpu usage is above 50%, but I think this doesnt happens in safe mode...task manager didn't help so I downloaded procexp{a task manager replacement} which found the root of the prob........hardware interrupts....that's it....so now what? is my warranty viotaled bceause of the mod? can i fix it? and generraly, IF i buy a new mobo will the prob be solved or its not the mobo's prob? memtest gave me no errros and it hit 400%..... VGA temp never exceeds 55 degrees celsius but i must say some lines appear when i open the pc.....I think though its because of the monitor{a really old CRT 17''}....anyway ive tried every drivers i could find{creative/nforce4/forceware}
    exact pc setup:
    athlon 64 3200 venice
    msi k8n sli platinum
    2x512 DDR400 kingston value
    fortron 500w bluestorm
    MSI 6600GT
    Nemesis Elite edtion case
    thanx for any help u can give me :(

    well scan your system for nasty software.... use spyblaster,spybot,ewido security suite,avast antivirus proffesional...
    for cleaning loading of sh..ts and unnecesery thinks to prevent PC lag use thase program will clean unuseful services automaticly.
    BOSSKILLER Service Optimizer

  • K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

    Hi there!
    I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
    See here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
    and here:
    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
    I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry.  When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen.  When i disable SLI mode it crackles less, but it still crackles.  Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
    My question is:
    Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
    I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem.  Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

    What's going on guys.
    I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
    We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
    Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
    Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
    LPB
    P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

  • MSI K8N Diamond NF4 SLI

    I'm waiting to buy this motherboard for a long time, can anyone please tell me when will it be available to buy? or where can i find that kind of info?
    I live in Portugal, and the only MB with NF4SLI available to buy is the ASUS, but i really want the one from MSI.
    Thanks.

    Quote
    Originally posted by cachirro
    I'm waiting to buy this motherboard for a long time, can anyone please tell me when will it be available to buy? or where can i find that kind of info?
    I live in Portugal, and the only MB with NF4SLI available to buy is the ASUS, but i really want the one from MSI.
    Thanks.
    For UK/EU area, Chillblast has them in stock
    http://www.chillblast.com/customer/product.php?productid=16756
    I'm not sure they have the lowest prices there though...
    (I just received one from them yesterday, so I know they did have them in stock, they're still labelled in stock)
    Before you do get one, check your PSU is going to do the job - There seems to be a comical PSU issue with the boards requiring a deprecated -5V line on the 24pin connector in order to power the onboard sound.
    See: https://forum-en.msi.com/index.php?threadid=72000
    Cheers,
    Stevil
    Athlon 64 3000+ (winchester) @ 2340Mhz (260x9) (Stock Air)
    MSI K8N Diamond SLI  Onboard sound not powered
    2x 512 Mb OCZ 3700EB Platiunum Edition
    Leadtek GeForce 6600 GT TDH PCI-Express @ 552Mhz (1125MhZ GDDR3)
    Enermax 600 Noisetaker

  • K8n diamond plus sli link card

    bought a open box k8n diamond plus from newegg and it didn't come with a sli link card
    to go between the 2 video cards.
    where can I buy one?
    thanks

    newegg was of no help.
    I got ahold of msi and they're sending me one.
    thanks.
    it was a open box board that turned out to be just a board LOL.
    i'm still looking for the full install of the creative software.
    the drivers load but none of the base creative software is in the
    msi downloads.
    so digicell can't fine the creative programs.
    i upgraded the bios to 1.20 and am waiting for the sli bridge
    so i can put the other 7900gt ko 512meg card in.
    runs good with just one, it should run even better when both are in.
    thanks again.

  • MSI MS-7100 K8N Diamond/Platinum SLI & MS-7125 K8N Neo4 Platinum Bios and Tools

    http://www.techpowerup.com/articles/other/111
    for those without a diamond club membership

    Hello !!
    The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
    If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
    Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
    Good Luck
    Greetz MurdoK

  • Strange findings with K8N DIamond/Platinum SLI and BIOS 3.6

    Having toiled for weeks trying to get my machine to run at 1T timings fully stable at memory speed 550DDR, I have finally done it.
    What you have to do is this...make sure that your NB voltage is the same or greater than your CPU Voltage.
    I had my CPU at 1.45+6.6% =1.546v and my NB at 1.5v. This would not work.
    I found out by accidentally putting 1.6v through the NB and Voila!
    Not only that but the RAM is now doing great at 285MHz (570DDR with 2.5-4-4-8 1T at 2.80v).
    All been stable through all benchmarks and SuperPi/Memtest for 2 days in total now.
    Updating my profile to match.
    My God it feels good.
    I hope that this helps some folk who have stability problems in any area.
    K6dude

    I have not tried the 3.7 BIOS, as it is all working well. I don't want to inherit any new bugs...I'll wait until someone tests it all properly.
    I wish that the 183 mem divider would be put back, I'm having to adjust it from 166 to 183 with A64Tweaker on startup.
    Anyone know if 3.7/1.7 has the 183 divider?
    Yes I was only successful current CPU speed with BIOS 3.2, 3.5 and 3.6, so try 3.6 and maybe 3.7 with my settings...you might be lucky.
    After you have flashed your BIOS, reset the CMOS button TWICE...and make sure that the PSU has no power going into it and you have no seperately powered USB devices attached while you reset it (This has found to be the case for me with my USB Keyboard/mouse devices), otherwise it will not reset properly and some of your old bugs could still be there.
    What week Venice CPU do you have...0517 is mine and it is so far one of the best batches...this could make a difference in some cases.
    K6dude

  • MSI K8N Diamond - SLI-switchcard plastic piece broken

    Hi.
    I have MSI K8N Diamond that has SLI-switchcard. It is being held down with that nasty plastic piece. Now I can't make the plastic piece hold any longer. As soon as I let my finger off switchcard, that plastic piece pops out. Is there any better solution to hold down the card?

    Quote from: dondon on 13-May-05, 04:47:01
    Running it right now with no switch card and/or bridge... same result... apci post report doesnt report the second card?
    I know the card is good as I have switched it to pcie1... does this mean the 2nd x16 slot is bad?
    Help!
    -don
    Contacted Technical support they report the 2nd pcie slot is bad, this dang thing isnt two weeks old :!
    -----Original Message-----
    From: Dons Desk
    Sent: Thursday, May 12, 2005 6:25 PM
    To: '[email protected]'
    Subject: RE: 3 -- Customer Problem Description Form
    Well..
    I have the sli bridge on the board in sli mode... and only a card in pcie slot two...
    I get what seems to be 1 long and 3 short beeps... no video..
    Does this indicate pcie slot 2 bad, if so what do I do to return this board... its less than a two weeks old.
    -don
    -----Original Message-----
    From: MSI Technical Support Team USA
    Sent: Thursday, May 12, 2005 6:16 PM
    To: 'Dons Desk'
    Subject: RE: 3 -- Customer Problem Description Form
    Dear Customer,
    Please have the SLI Bridge set for SLI Mode enable and retest with only the 1 video card into slot #2.
    If this works then it indicate the PCI-E slot is fine and the SLI Bridges are the cause.
    If it did not work at all then the PCI-E slot #2 has problem which the mb needs to be serviced:
    http://www.msicomputer.com/support/CustomerS.asp
    Sincerely,                                         
    Technical Support Division
    MSI Computer Corp.
    http://www.msicomputer.com

  • K8N Diamond - SLI woes - I am almost ready to scrap it ALL! DESPERATE!!

    OK - story, brothers pc that I built for him almost a year ago, couple of months after the build, purchased another 6600GT to fill the second slot (both MSI 6600GTs) worked a treat, SLI, boom boom, no dramas. The card was removed from the system (borrowed) a couple of months later to fit to another system as a test card, and he was without it for a couple of months and just running the one 6600GT again. Since then the card has been returned to his system, but I can't for the life of me get the freaking SLI to work again 
    System-
    MSI K8N Diamond
    Athlon 3200
    MSI 6600GT x 2
    2 x 512mb PC3200 PQI
    1 x WD SATA II 250GB
    1 x LG 4167B DVDRW
    TT Soprano + 400w TT PSU
    This evening I have literally tried everything I could think of, started with driver cleaner and then reinstalled the 84.21 drivers I'd had working with it originally but no go.
    Then installed the 91.31 drivers in vain knowing full well the result would be no different.
    Removed both the cards, flipped the SLI config card and tried each card seperately thinking maybe one of them was dicky, nope.
    Put them back with card two in card one's position and vice versa.
    Cleared CMOS
    Format C: reinstalled XP, thinking maybe coolbits had dicked something up or there was something yuk in the registry from when I originally removed the second card but HADN'T DISABLED the SLI multi GPU feature in the Nvidia control panel before I shut down and pulled it out.
    SP first boot installed all drivers Nforce, sound, network between reboots and then 84.21 again, no joy.
    Desperation sets in
    So I'm looking at the piddly TT 400W psu wondering if maybe the couple of months 'work' it had done between the card being removed and then refitted could have been enough to wear it down to a point where it wasn't going to play the 'SLI game' anymore, yep, really clutching at straws by now.
    Unplugged it all and fitted up an Antec 480W TruePower 2.0 I had sitting brand new in box for a rainy day, but alas.
    So now I sit here typing this rant, staring across at the system to my right which is idling away and smiling at me while it displays the NVidia SLI config box with Nvidias little speel about adding a second graphics card for significant improvements in rendering technology with no option to enable SLI and I'm left thinking, what the hell do I do now  arrrghhhhhhh   

    Yeah I'm 100% sure this is hardware as opposed to Windows, though it would be nice to know what the PCIE VGA Link Width should be reported as for both a single card and SLI... I've never flashed the BIOS on this, irrelevant considering the SLI WAS working all peachy.
    Yeah the SLI switching card has definitely been reversed and re-reversed... I know because I take my time doing it cause I've seen people bend pins in teh slot by putting it in at the wrong angle. I've also had it out and back in a couple of times since to make sure that it wasn't a seating issue.
    So my SLI switch is in the right way and my bridge is sitting on top of my two cards but it still won't play ball. Although I've turned the bridge around as was suggested I can't see that would make a difference because I reckon it's the same both ways, the bridge, not the switch that is.
    I really don't want to have to RMA the damned thing, bahhhhhhhhhh this will be the second (seperate) Diamond I've had to send back to my wholesaler for RMA !!!   

  • K8N Diamond Sli - DIMM Slot failure ..

    i have 2x1Gb crucial ballistix tracer rams which i am am running only 1 in slot-1 (green closest to cpu) at the moment due to this problem
    i think my  purple slots have died..
    inserting ram into both slots 1 & 2 cause beeping on start up... resetting cmos didnt help and adding voltage didnt either
    i have tried moving to slots 3 & 4 with still no luck
    1 stick works fine in slots 1 & 3 ...... Rams together in both 1 & 3 seem dont boot up but no beeps on inital start up
    My rams have LED's so i can see if they start up properly....unfortunately [ for me ] anything with a slot 3 or 4 combination is out of the question
    the Problem occurred when i added an external card reader into the usb slot..... i was thinking its a power problem but any help would be much appreciated
    i am currently using 1.6 BIOS due to the fact that i am able to run 1T timing as i have tried a couple of different bios and tried to run 1T
    i am thinking of a power inadequacy [ <---- lol not sure on spelling]   as i have water cooling and many fans on a 500w power supply

    i have an Ultra X-connect 500w modular psu
    running 5x12cm fans
    2x9.2cm fans
    swiftech hi-flow mpc655 pump
    2x200Gb Western digital SATA hard drives
    1x74Gb raptor
    2xpioneer 109 dvd burner
    1xfloppy drive
    leadtek 6600gt 128Mb video card [requires molex power]
    MSI k8n diamond sli
    all voltages are at stock
    im not sure about the rails but specs are
    +3.3VDC     +5VDC       +12VDC           -12VDC     -5VDC   +5VSB
     28A             30A            34A               0.8A        0.3A      2A                          .... are these the rails?
    Could it be a  BIOS issue?

  • K8N Diamond SLI Creative Sound Blaster 24-bit

    I have a problem with My MSI K8N diamond SLI 's integrated Creative SB 24-bit sound.
    The sound is unaffected by the speaker configuration in control panel>sounds and audio devices>advanced.
    For example when playing a 6 channel sound through my stereo speakers, the center channel does not get split between front channels. This means I can hear no voices as they are only on the center channel! 
    Can anyone with the K8N Neo4 platinum or diamond sli confirm this or does anyone know a solution?

    If it is a grounding problem it would be within the PCB of the motherboard, the wiring there that either are not connected directly to ground. Or the problem that a ground plane / trace runs to close along a signal trace, causing induction of a signal to what should be a no-signal ground.
    As you say, a lack of voltage could also be the problem, if the powerfeed to the chip is fed from the same source as the IDE (as it correlates with IDE activity). Any rapid drops in Voltage (voltage spikes) could result in just the phenomenon as we hear it and as I measured it. But it is less likely than a ground related problem. If there was such a load on the trace to deliver voltate to the chip and some other component, that the voltage would drop, we would see this on the motherboard. The amps would spike and we most likely would have seen a burned out trace.
    So it is more likely that there is a matter if impure voltage feed to the circuit. But this is also much less probable than the ground issue. It is not uncommon to get ground issues in audio circuitry, especially in applications and environments where you have PCB traces in which high frequency signals travels close by. (a phenomenon not only contained to audio circuitry, as you probably have seen motherboards with traces run in circles, to get rid of similar problems).
    I would not blame creative for this. I have had to deal with many soundcard issues in 10+ years as a computer tech. And I will leave it at that. I have much more to say about the quality of MSI products than the quality of any soundcard from any manufacturer, but that is also something that I will not rant about here.
    If you do not get it to work with a stand alone sound card, I would check your PSU so that you do not have any bad or impure voltage there (measured with an oscilloscope, if you know what you should look for during load). I would also check so that the computer really are attached to a grounded outlet to reduce problems with interference. Third I would place the soundcard as far away from the GPU/s as possible (a good source for interference).
    In my experience, only soundcards that has been faulty has produced similar sound issues as this motherboards onboard sound produce. Especially bad caps (do not even have to be the leaking kind) tend to induce this behaviour.
    But the last part is something I have ruled out on this motherboards onboard audio. If there were bad caps there would be telltale spikes in the the measured signals and voltages. There are none (except for previously noted discreprancy in the output signal when accessing IDE).
    I do not have a reciever, so I can not try the Spdif out, to see if that works as it should or not.
    Also, I have not tried to remove the IDE devices and use only my SATA drives to see if that removes it problem (I guess it does, but that is a bad solution).

  • ATTN K8N Diamond Plus Users - SLI problem

    i need help diagnosing a problem:
    i installed this board last night, transplanted my a64 4000+ along with 2 7800gt's and a brand new antec 550w psu. i did the live update bios flash (dont recall what version i am running now) got my e/n and audio drivers in place etc.
    when i enable sli, the machine freezes when i fire up a game. both cards are plugged in properly, i tried swapping the slots they were sitting in, i tested both cards individually and they are good, i reversed the sli bridge just in case, reverted to fail safes in the bios,
    i cannot play games in sli mode, in single card mode i can (I THINK... i am afraid this might be a heat issue, but i put plenty of fresh arctic silver on my proc, FEAR seems to freeze regardless if i am running sli or not..i will have to double check when i get home from work)
    has anyone experienced anything similar? i am running fresh drivers and this is my first sli build so maybe i am missing something... i have been racking my brain for the last 12 hours, i dont think its the ram, could it be the northbridge chipset driver?  i installed the one off the disc, but i didnt check the site for a newer one...
    thank you so much for your time.

    Quote from: kakarocht on 08-February-06, 13:58:02
    Do not used liveupdate to flash the bios. Used from the program files itself. Refer from my sig on the flashing the bios. BTW create your own sig and gives more details about your peripherals and psu in details. What my concern is your PSU problems. Could you gives more details your PSU? Have you tried to install new drivers from NVIDIA??
    the psu is a brand new antec 'true power 2.0' unit that i bought from newegg...in bios the 12v rail is showing 12.3 which might be a little bit high...but it is stable for what its worth...
    here is my setup, i will create a sig shortly:
    2gb PQI ram DDR400 running at stock speeds, not sure of the latency but i am thinking cas2
    A64 4000+ Clawhammer proc running at stock 2.4ghz speed, 1mb cache
    MSI K8N diamond+
    dual 120gb maxtors
    sony dual layer 16x dvd
    stock cpu fan.
    shitloads of AS7
    another curious fact:
    since the upgrade FEAR doesnt want to work at all... DOOM and COD2 both work in single card mode...but FEAR will freeze on me mere seconds after the first map loads...
    i dont know what the culprit is...but i bet im gonna kick myself when i find out...
    im gonna go re flash my bios now...
    thanks for the input, its always greatly appreciated.

  • Changing from K8n neo4 SLI Platinum to a K8n Diamond Plus

    Is it a  or  to try and just change  components and everything over and hope it boots up or get some help here in the forum for my answer? I am perplexed , one techie says it probably will need formatting and reinstall :biggthumbsdown:and yet another says tht they are both nf4 chipsets and should be able to boot up . What do you all think will work for me ? Maybe one of you has a solutin for me that is better than formatting and reinstall.  Thanks for your help

    Quote from: limpet on 08-July-06, 08:43:56
    yeah , the platinum won't give me 16 x video with the sli switch card in non-sli mode.
    that's strange, it is the second time that i've seen this problem on the forum, but i never had any problems with mine. however, i thougth that you were going for the extra memory voltages that the diamond plus can provide, because today's graphic cards are still far away from taking up even the 8x pci-e bandwidth. but if you got a good deal, go for it. both of them are excellent mobos.
    you probably won't need a clean system install, but i would suggest that you do it anyway. unloading old drivers and replacing them with new ones will always cause the system to slow down, even if you won't notice. that's why, for a new build, it is always suggested that you go with a clean OS install.

  • Sli and k8n diamond plus

    when i install a second graphics card for sli on k8n diamond should enable or do anything in the bios?
    or is it just plug and play?
    im using bios 1.0
    thanks in advance for any help...

    s_quire,
    Just make sure you use the latest nVidia nForce & ForceWare Drivers
    Take Care,
    Richard

  • K8N Diamond SLI...no more than 2070MHz?

    Can anyone here shed light on why my new K8N Diamond will only run with a BUS Speed of 230 MHZ with my Venice (0517) 3000+?
    230x9=2070Mhz...pretty poor.
    I have 2.75v VDIMM
    1.45v +3.3% Vcore
    3x HT (16 up 16 down)
    Spread spectrum is off
    Cool & quiet is off
    Dynamic O/c is off
    The 1GB Corasir PC4400 Dual channel TwinX memory is at 1T 1:1 (200MHz) at 2.5-4-4-8 (230 Mhz is well below it's 275Mhz rating)...all auto configured.
    I am running BIOS 3.4/1.4 (Both do the the same thing)
    CPU Temp is 28 to 31°C, System Temp 26 to 29°C after running for an hour or so.
    Anything more than 230 MHz HTT and the machine will not even post.
    I have even changed the memory for a new set from the supplier...still behaves the same!
    My machine specs are in my Sig at the bottom.
    All I can think of is that the BIOS revision is holding the system back.
    I was hoping to run the HTT BUS at 275 to get the max bandwidth for my RAM at 1T.
    Anything between 2.4 and 2.7 Ghz would have been sweet!
    I was careful to buy the best components for this new machine...even waited for Venice.
    Any suggestions would be welcomed.
    Oh, and when cold booted, the machine can take 3 or 4 attempts to post, but it's fine when warm booted/reset....hence my suspicions of the BIOS.
    K6dude

    Not got round to re-flashing the BIOS, but used ClockGen yesterday and got a stable 9x280=2520MHz at 1T with a 3x HTT multi for 6 hours, no crashes or hang-ups....all on stock voltages for RAM CPU and NB.
    CPU TEMP Max got to 33°C, case TEMP to 30°C.
    The BIOS is definitely not stable in itself.
    I know it's  a dodgy thing to do unless you have a BIOS Savior (not available in my country), but has anyone ever tried using the DFI Lanparty BIOS in an MSI Mobo?
    Mostly same accessories apart from Creative sound, just maybe? After all an Nvidia "Award" based system should be uniform in most respects shouldn't it?
    I once used a Toshiba BIOS in a Compaq to get extra settings on a laptop and it worked a treat. All I lost was the ability to "see" the LAN socket, but a small price to pay I think.
    K6dude

Maybe you are looking for