K8N Diamond Plus IDE Disk Does not recover after standby or hibernate

Ok this is wierd after i suspend or hibernate windows does not see my IDE disk anymore. I am running bios 1.10. Note ide cd and dvd drives dont seem to be a problem.

z3razerviper,
Have had any problems with the drive at startup not being detected?
Check the system log for the type error you are getting for the failure?
As all the other drives in your system SATA, the Western Digital older system, has a lot of hours on it?
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

Similar Messages

K8N Diamond Plus - Cool'n'Quite - Not Starting At Full Speed Everytime. Why?

Hello,
I have a K8N Diamond Plus with a power supply that is 620W switching. +3.3V 25A, +5V 30A, +12V 18A, +12V 30A, nvidia 7900GT, amd x2 4400+. My computer will not start at full speed everytime if i enable cool'n'quite. If i disable cool'n'quite, of course, it will start at full speed. I have run multiple benchmarks, etc. using cool'n'quite at full speed and have never had any problems whatsoever. Using BIOS 1.1.
Can anyone suggest an answer, to get the computer to boot up everytime at full speed using cool'n'quite?
Thanks!

you don't need CoreCenter for Cool'n'Quiet to work
install the AMD64 Processor Driver from here:
http://www.amd.com/us-en/Processors/TechnicalResources/0,,30_182_871_9706,00.html
reboot your PC, ensuring Cool'n'Quiet is enabled in BIOS and CPU Multiplier is set to [Auto]
To enable the Cool ‘n’ Quiet feature on a Windows XP system, you have to change the power scheme. Open the ‘Power Options’ from the Control Panel. Choose the power scheme ‘Minimal Power Management’ and click ‘OK’ to enable Cool ‘n’ Quiet.
On a Windows 2000 or Windows ME system, an AMD Cool ‘n’ Quiet tab will appear under Power Options when the Cool ‘n’ Quiet software for Windows 2000 and Windows ME is installed. This must be set to “Automatic Mode” for Cool ‘n’ Quiet to be enabled.
AMD Cool'n'Quiet Installation Guide (.PDF, 653kb)

"Selected disk does not exist" after install using Unetbootin

Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
Booting 'Arch Linux'
root (hd1,0)
Error 21: Selected disk does not exist
Press any key to continue...
if I press any key, it goes to grub menu again.
I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
and post it's output.

USB Flash Disk does not mount after Leopard Upgrade

I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.

vikas wrote:
I am not able to use my USB flash disk after the upgrade to Leopard. The disk does not mount at all, though i can see it listed in the System Profiler.
Before the upgrade to Leopard, the same disk used to work perfectly.
Can anyone please tell me how I can solve this issue ?
Thanks.
Check to see if your USB Drive has the latest firmware. Leopard tends not to support older firmware.

Airport does not reconnect after standby...

Is anyone having issues w/ wireless not reconnecting after standby? In order to resolve the problem, I have to turn airport off then back on. Most of the time I can get back on using on/off method, but seldomly I have to reboot. This is my config:
SSID is not broadcasted, using capital letters and numbers for SSID Name.
WPA TKIP set for router encryption. WPA Personal selected on Airport.
I don't seem to have this problem on my Macbook running Leopard, so I'm pretty sure it's hardware/driver related to my Macbook Pro. I have to keep tabs on this, but I almost think this problem does not appear when a network SSID is broadcasted and/or unecrypted. It could be my imagination but not sure.
Any ideas or same issues out there?

I always have the same problem; I assume it has something to do with the fact that I regularly switch my cable modem to "standby" when done surfing the internet. Seemingly Airport loses the signal (or whatever) because the modem isn't feeding a signal being in standby mode? When I turn the modem back on, I have to turn Airport back on as well. So far, I've just felt it to be a small inconvenience.

PCo 2.0 does not recover after "System is too busy" error.

We run PCo 2.0.1.8 with multiple agents (OPC-DA 2.05a --> MII 12.1.6.Build(91)).
Sometimes our MII-Server is under heavy load and is not able to process PCo messages anymore. Therefore one PCo agent stops working and logs this message:
"System is too busy. Incomming message processing is halted until the system becomes less busy."
The other agents stop working as well. They never recover and start sending messages again.
It is not about retrying to a send old message again. We set "Maximum Retry Attempts" to 3 and "Retry Interval" to 1.
It is about sending new messages after OPC items changed. Our OPC servers change values at least once a minute, which should result in new messages.
Any suggestions to solve this issue?
Regards,
Martin

Kevin,
of course we try to avoid this error and investigate the reason, but it may happen and we would like PCo to recover from it.
PCo and its push technology is the right choice for us. We have to get informed when an OPC value changed. We do expression evaluation as well, but a few machines change their values so often that we get notifications every 3 to 5 seconds. And this is the reason for the very short retry interval of 1 second and 3 retry attempts in this case. If the notification comes too late, the information is outdated and we don't need it anymore.
The retry interval is not the point. When the MII server becomes less busy and is ready to process new notifications again, PCo does not even send new notifications. The agents have to be restarted to work again. That's our problem.
Expected behavior of PCo
00:00   OPC change --> MII idle --> Send Notification --> OK
00:03   OPC change --> MII busy --> retry 3 times, then throw away --> OK
00:06   OPC change --> MII still busy --> retry 3 times, then throw away --> OK
00:09   OPC change --> MII not busy anymore --> Send Notification --> OK
Reality
00:00   OPC change --> MII idle --> Send Notification --> OK
00:03   OPC change --> MII busy --> retry 3 times, then throw away --> OK
00:06   OPC change --> MII still busy --> PCo does nothing --> BAD
00:09   OPC change --> MII not busy anymore --> PCo does nothing --> BAD
Best regards,
Martin

Ipod touch 4th loging screen graphs damaged, does not recover after restoring software

My ipod touch 4th loging screen graphs are showing like coloured barcodes in movement. I have already restored the software with the updated version of itunes several times, but the problem continues. It is unaccessible, although I had an alarm programmed that keeps working. I never jailbreaked it, only downloaded a few books and apps from itunes. Is there a way to get it back to work normally from home?
Thanks in advance.

If you still have the problem after restoreing the iPod to factory defaults/new iPod (not from backup) then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

X240 fingerprint reader does not work after standby or lockscreen

Hello all,
I have a new X240, and the fingerprint logon no longer works after the computer resumes from standby or from a lockscreen (screen saver). I have checked other solutions here and in other sites, namely:
1. unchecking the power option of the fp reader in device manager,
2. and switching the 30-day standby in Lenovo Settings
Neither of those solutions have worked. I have the latest BIOS and FP driver versions. I made sure the the FP was enabled in BIOS, and I even switched the settings to allow internal FP reader only. Still, the FP will only work when I first power on the laptop, but not after resuming from stand-by. I have checked in Device Manager after manually entering the password, and it says that the FP is working properly.
I am at a loss, and I want to exhaust every possibility before I call tech suppport. Any suggestions would be appreciated.
X230
x200
T410
X240
TP Tablet 2
Solved!
Go to Solution.

Fixed.
I normally use System Update to check for newer versions of Lenovo software. SU didn't catch that there was a new version of FP reader. Just to be sure, I doublechecked on Lenovo's website, and lo and behold, there was a newer version of the FP reader. I had to download it and manually uninstall the previous version. It's fine now. However, I don't understand why Lenovo does this - why does SU not catch updates? It's not the first time that this happens, by the way, nor is it limited to this laptop (I own or have owned a T60, X61, X200, X201, X230, T410, and now the X240).
In any event, the FP is working properly now. I hope this helps someone else.
X230
x200
T410
X240
TP Tablet 2

Which PSU for MSI K8N Diamond Plus?

I am so frustrated ... I have spent over 6 hours trying to find out which power supplies I can use with the MSI K8N Diamond Plus.
I am not able to find any PSU that has 24 pin, 8 pin and 4 pin power connectors ... do you have to get them custom made or something? I am in Switzerland and it is hard to track these things down if you do not speak the language.
This is the page which I am using to try and find a compatible PSU:
http://www.stegcomputer.ch/browse.asp?cat=376
I think the Spire Rocketeer VI should work but am not sure.
Can anybody recommend a PSU that is compatible with this board? Please.

Quote from: russellmrgn on 27-March-06, 20:51:26
Off topic.
Kenito443,
I see you have the Stacker830, was looking at that case myself. How do you find it performance / quality wise?
Russell
Yeah i love it...the cooling is amazing, my case never goes above 30C and the cpu idles at 22c and never goes over 27C even when OC'd,.. granted i have substantial cooling for the cpu. the case is completely tool less and boasts a up to 9 12cm fans...the case is double encased Al so with a silent PSU (true 500W), which is my set up , it is extremely quiet. i was going to get the lian li until i saw both of them on display. the lian li seemed a little harder to set up for water cooling -if i wanted that option in the future, and the tool less feature for the cm stacker was a lot more appealing. Interestingly, it has its own proprietary hard drive noise reduction and cooling doohickey. Also, the mb has this cool pull out tray plus the PSU rail is really easy to accomadate for a larger PSU. the store where i bought it from in santa clara CA threw in some of these nice dust filters with the case and I was sold. the only con was the price, i paid around $230, which is a little expensive for a CM....oh and a word of warning , the case doesnt really look that big in pictures, but it is HUGE !! it has 10 5.25-inch bays..you can fit every single imaginable peripheral and still have room to fit your kitchen sink..i was definitely surprised to see how big it was in person.

Im trying to install a new application on my mac but it keeps on coming up with 'The volume of this disk does not meet the requirements for this update' any ideas how to solve this?

I have recently fully updated my mac to 10.8.2 and i am trying to install a small facebook application but every time i come to chose the disk it says ' OS X facebook developer preview can not be installed on this disk. This volume of this disk does not meet the requirements for this update' any ideas on how to get round this?
thanks

That may be the new Mountain Lion "sandbox" protective software kicking in, possibly, because ML "thinks" that App doesn't meet ML's new strict security requirements. A common phenomena. If you feel the 3rd party App is really OK, you can override this feature and install the new App by holding down the Command key when you click to install the new App. That's one possibility for the error message appearing. If not, another possibility is that that Developer Preview software package requires some previous piece of software be installed prior to downloading this Preview. You would have to check the Facebbok websiste's Developer Forums for help if this is the case.
Hope this helps

3 ea MSI K8N Diamond Plus will not POST

I have 3 K8N Diamond Plus motherboards that recently started having intermittent problems POSTing to BIOS. I initially found it possible to boot by clearing CMOS and reentering my settings; however, over time these boards have gotten to where they will not POST at all. Power comes up, but the four-LED diagnostic display stays continuously red, indicating no BIOS activity. Ideally, I'd like to get my hands on a service manual for this board, but if anyone can throw out common issues with this board as a starting point, that would be great. All of these boards have been in service for more than 3 years in 3 different machines. The failure appears to have identical symptoms. I would bet the component that has failed is common to all 3 boards. It seems other people are having the very same problem with these boards over several years of service. I have tried all of the usual troubleshooting tactics with no success. Thanks!

Check for bulging, leaking, ruptured capacitors near CPU socket.

K8N Diamond Plus microphone not working

Hello All...
Thanks to everybody who helped me with my cpu power problem - the computer is up and running wonderfully now. The only issue that I'm experiencing, and I'm fully prepared to accept user error, is the fact that my mic is not working, or the levels are EXTREMELY low. I have an antec case, and I used the pin header on the motherboard for front panel audio which contains a mic input and a line out (For me, it's for headset convenience without having to remove my speaker wire). Since both the pin header and the connector conform to Intel standards, I think that's not the problem. I've used the drivers on the CD as well as the drivers on the Creative site for Soundblaster Live 24 bit. Both the front and rear connectors (and either version of the driver, for that matter) yield very low volume from the microphone. I *could* suspect the headset, but it's fairly new and worked yesterday, and also, the earphone portion seems to work correctly.
Since you'll want my specs:
K8N Diamond Plus
Antec "Piano" case with 450 watt antec smart power supply
Geforce 7800GTX
dual pata drives (striping)
dual dvd rw drives
dlink wireless lan
Let me know if I can provide any other info, and thanks in advance for any assistance
Steve

Didn't seem to make any difference. I jumpered the pin header so that it was back to the way I got it out of the box. I even used a microphone for our camcorder, and that didn't seem to get any better result either. Very strange...........

Does new Zalman CNPS8000 fit on MSI K8N Diamond Plus?

Was wondering about this, and if there would be issues with the height of the copper northbridge heatsink the MSI K8N diamond plus has.
Will this new CPU cooler fit or will it not like the other Zalman 7000 series?

TimeReaper,
I do not see why not:
Take Care,
Richard

K8N Diamond Plus boot problems

I just built a new computer and it was working fine for about a month. Then one morning when I started it up it wouldn't turn on. The front LED's turn on, and the fans all start, but nothing ever shows up on the screen. The set of four lights on the back show R R
G G
Nothing has changed since the pc was working fine. I haven't changed any bios settings or added any hardware or software. I did try resetting the bios using the CMOS jumper, but this didn't change anything. The lights on the back show that it is initializing ide drivers, but in the manual it also shows that it is one of the last steps in the start-up process, so i would think that the memory check, processor count, msi logo ect. should appear on the screen like it normally does. However, the LED that blinks when the hard drive is active never lights up, but when i open the case and feel the hard drive i can feel it vibrating like it is functioning properly. And if it is a hardrive failure, then shouldn't the bios still start up and show up on the monitor? I have heard that many weird problems can be attributed to the psu, but I have a 500w Antec Smartpower 2.0, which is a pretty reliable psu from what i've heard. Any help or suggestions would be welcome. Also, how would i test individual components to find out what is causing the problem? I think since everything is within a couple of months old i should be able to get replacements. Thanks in advance for any help.
System Spec:
MSI K8N Diamond Plus
AMD Athlon X2 3800+
Nvidia 7600 GT
Maxtor DiamondMax 300gb ultra16
2gb Corsair Twinx xms ddr400
500w Antec Smartpower 2.0
Thanks!!

Quote from: Mikeyp926 on 15-August-06, 12:58:47
You guys are awesome! Thanks a bunch for the info on ram, I feel like I understand it better and I looked and found all the stuff in the bios that you guys were talking about. I'm downloading speedfan currently and will go install it on my other computer. I tried swapping the sticks of memory, but i ran into the same problem i did before. So i'm assuming that i can safely say one stick is faulty right? And do any of you guys have any experience trying to get replacement memory from crucial? I'll have to go poke around their website also. Well, thank you all so much for all of your help. This is my first home built pc and i'm trying to learn alot about them. Once everything is running properly i may try a little overclocking, but i'd like to get everything running smoothly first. Just out of curiosity, what would make a stick of ram go bad like that? It was only a month old, and i thought crucial xms was pretty good ram. Is it not? or did i just get unlucky?
Thanks a ton for all the answers, this forum is the most helpful one i've ever seen. thanks!
Maybe that you're unlucky to get those faulty RAM. Crucial RAM is not bad if you get the better performance if you're ocing your PC if or else get the value RAM if you don't oced.
Quote from: Svenomous on 15-August-06, 12:55:00
Speedfan 4.29 works with the K8N Diamond Plus. I have it running now
Ok. Get it but not sure about MBM as it seems that it don't support it. :p

K8N Diamond Plus - ram issue

Ok, I just got this board and some bran new Corsair ram to go with it. The problem is the ram will not do 1/1 clocking. It will only do 5/6 and reads it as 333 ram, which it is not. I tried to change it in the bios manually but it will not go above 5/6 clocking. So at 222FSB I am only running the ram at 185MHz. Here is my system specs.
MSI K8N Diamond Plus - Athlon XP64 3200+
Corsair TwinX 2048-3500LLPRO (2x 1gig PC3500)
OCZ 600w PSU
Does anyone have any ideas how I might be able to accomplish running the ram at 1/1 speed? Is there some bios update that I'm not aware of (the live update says there isn't any)?
Thank you!

Quote from: K6dude on 20-January-06, 13:23:13
Hi,
I think you might need to use banks 1 and 2 to get the 128bit contoller working, otherwise you will be stuck with the 64 bit single channel mode.
Not sure what's up with the 4 banks full though for Latin.
A possible fix could be to reduce the HT multi?
I assume that you all know that Corsair default ram Voltage is 2.75v, and MSI is known for only giving 2.5 to 2.6v. Try manually setting 2.75 or even 2.8v and see if that helps.
K6dude
Thank you for the help... I just found the entry in the User's Guide on page 2-7. I followed the instructions of using banks 1 and 2, my computer would not boot. I used banks 3 and 4, like what was also shown on the table, my computer would not boot at all. As far as the voltage goes, I have it set at 3.0 volts so there's plenty of power.
On every configuration I have tried I am watching the LED lights on the ram and they are getting power on the bootup just fine, I hear my hard drives spin up, all fans spin up just fine, but monitors don't turn on. For some reason, it's just not reading the ram right. The only way it boots up is with the sticks in 1 and 3 slot. Any ideas?

K8N Diamond Plus IDE Disk Does not recover after standby or hibernate

Similar Messages

Maybe you are looking for