K8N Diamond Plus, Line-In & AVerMedia Studio .103

Hello,
I got K8N Diamond Plus and AVerMedia Studio .103 audio out connected to my onboard sound device's (Audigy) Line-in. I don't know how to describe the situation but I'll try. The problem is that the captured audio is some kind of wavey like an old "record", the sound is cry-like especially when there's a music in the background.
It is really annoying to have such a problem with this kind of expensive product. I'm sure it's not TV Card related because I use it for 5 years now with the same OS, Application, Drivers and cable. The day I upgraded my system I met this trouble. I've searched for driver updates, chipset updates related to this issue but couldn't find any. I tried every possible option/configuration with the sound card and no hope.
I think it is because that the line-in is also used as an output with the 4 speaker configuration. Every passed day with this issue I add spoilt videos to my archive and this upsets me.
Thanks for your help and concerns
Yours respectfully
M. Erke Tiryakioglu

Quote from: syar2003 on 30-April-06, 17:46:53
The line-in only has dual fuction in 8 speaker sw config (7+1) .
With 5.1 and lower the numbered jack #1 is only having line-in config.
Make sure you have correct Multi-Channel Audio Function mode properly selected in the software
utility for your speaker connections/configurations.
And use the Creative web update to have the laterst drivers and software .
First of all thanks to all of you guys...
Secondly, I was just trying to point out that may be the dual-function support (doesn't matter when) is doing this...
And yes I am using windows XP as it says in my signature, but thats not an issue since i used this card (AverMedia) with XP pro for four years with no problem.... I can't say anything about the dual-core tho...
BTW I tried to manually update the audigy from creative's web site, but couldn't be sure if I had to download the Audigy drivers or should I use MSI's web site for my sound device, since it's on board? Or is there a version in the Creative web site to, or even the audigy drivers itself may be? Do you have any suggestions? MSI doesn't have an update tho I know that..

Similar Messages

K8n diamond plus no audio after connecting Avermedia/Hauppauge tv card

k8n diamond plus
Avermedia mce m1a2 tv dual tuner
windows xp mce
after connecting the tv tuner card there is no more audio at the speaker output.
(the same problem occurs with a Hauppauge tv pvr 500)
the headphone output is still working.
is there someone who knows how to solve this problem ??

Found it here ! it works
http://forumz.tomshardware.com/hardware/k8N-Diamand-Sound-ftopict183919.html

Aftermarket HSF options for K8N Diamond Plus

Just built a new rig with the K8N Diamond Plus and am very pleased with the board -- worked great from first power up and with a little BIOS tweaking I have no trouble getting a 50% overclock from my dual core Opteron 170. No headaches at all, unlike my previous experiences with Abit boards.
The AMD heatsink fan unit (with heatpipes) provided with the 170 is not bad at all, but I'd like to replace it with a more capable unit, along the lines of the Zalman 9500, Scythe Ninja, Tuniq Tower 120, Thermalright XP-120, etc. The tall heatsink of the Nvidia NB is close to the CPU socket and quite high, so I'm not sure if any of these will fit. Anyone using one of these or similar heatsinks ? Please let me know if they fit, or did not fit.
Since I could find any of the 7800GTX 512MB boards I wanted, I'm using a single MSI X1900XT card right now but plan to go SLI in the future with 7900GTX cards driving the 30" Dell monitor. The ATI video board and nVidia mainboard surprisingly get along great, with no crashes so far and 3DMark06 scores above 6000 -- the X1900XT is an impressive piece, and much faster than the X800XT-PE I had in my previous computer. But the fan can be extremely loud and the Catalyst Control Center sucks. Unfortunately the old ATI control panel is no longer offered...

TimeReaper,
The problems your are talking about are not uncommon with this MS-7220. The BIOS Clear Circuit physically has problems and that is not something they are going fix with a BIOS upgrade.
The BIOS Clear Circuit actually trashing the values stored in the CMOS by not doing a complete clearing of the CMOS is causing the problem. What leaves trash for parameters, for the BIOS to use when rebooting.
Let give you an example that fits your case. You can set the BIOS to turn the system on at any give time and date. So, if the trash in CMOS is in those parameters storage location. Therefore, whatever trash value gets stored in the locations, as a dated and time, will turn the computer on at that time. So, you could of had the computer come on in the meddle of the night two week later. Now, think of all the functions the BIOS have and how many weird things people are having and do not know why. There is one guy that is a regular on the Forum how has been fighting a problem I know is caused by trash in the BIOS CMOS, but Strick and I have ask him to do a good CMOS clearing and he just will not do it. I even wrote out in great deal the over night CMOS clear procedure I use. It is a pain in the ass, but some times, I have too use it. I just had to use it, upgraded V3.09 using short CMOS Clear and had no problem. Used the short procedure again when upgrading to V3.0A and everything when to hell, had to finally use the long overnight procedure and reinstall Windows to get computer to run right again.
NoBS, when your computer goes BOOO during the night just plain it o MSI.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

K8N Diamond Plus and MBM5

Anybody got MotherBoard Monitor 5 or Speedfan, working with the K8N Diamond Plus
I need to configure my LCD on my keyboard and can take values of temperatuer only from these two programs.
The programs to create custom screens on the LCD is the LCD studio.
If anybody got it to work please enlight me

Neither of those progs have support for the Diamond Plus...as stated, Everest Ultimate does though.
Quote from: kingdomwinds on 30-April-06, 04:15:40
BTW this is offtopic but can you get read write queue bypass to 16x? I set mine to 16x but it shows up as 8x in windows. Same with the idle cycle limit. I set it to 256 but i shows up as 16. Really retarded mobo IMO
I have both set at 16x and 256 respectively without problem

K8N Diamond Plus microphone not working

Hello All...
Thanks to everybody who helped me with my cpu power problem - the computer is up and running wonderfully now. The only issue that I'm experiencing, and I'm fully prepared to accept user error, is the fact that my mic is not working, or the levels are EXTREMELY low. I have an antec case, and I used the pin header on the motherboard for front panel audio which contains a mic input and a line out (For me, it's for headset convenience without having to remove my speaker wire). Since both the pin header and the connector conform to Intel standards, I think that's not the problem. I've used the drivers on the CD as well as the drivers on the Creative site for Soundblaster Live 24 bit. Both the front and rear connectors (and either version of the driver, for that matter) yield very low volume from the microphone. I *could* suspect the headset, but it's fairly new and worked yesterday, and also, the earphone portion seems to work correctly.
Since you'll want my specs:
K8N Diamond Plus
Antec "Piano" case with 450 watt antec smart power supply
Geforce 7800GTX
dual pata drives (striping)
dual dvd rw drives
dlink wireless lan
Let me know if I can provide any other info, and thanks in advance for any assistance
Steve

Didn't seem to make any difference. I jumpered the pin header so that it was back to the way I got it out of the box. I even used a microphone for our camcorder, and that didn't seem to get any better result either. Very strange...........

K8N Diamond Plus + Adaptec 39320

I have just built the following
K8N Diamond Plus + ATI All-In-Wonder 800GT + Adaptec 39320 + 2 x Atlas 15k II (Raid 0) + 2 sticks of 2100 memory
When I reboot it's 50/50 whether or not we get to see the XP desktop or get a reset. From a warm restart (within XP) it hardly ever boots. From a cold start I get more success. In safe mode it gets as far as MUP.SYS and then waits. After that it may boot XP or reset. Also the XP logo (fade in) at the start stutters a lot.
So I get the Adaptec bios screen, I get the XP logo fading in and then just when you expect to see the blue desktop it resets. I have seen a couple of "controller failed to respond in time" in the XP event log.
Is this some kind of timing issue? Is there a known fix?
thanks
charker

Charker,
You power supply looks like a good one. The reason that Stick and I were jumping on you power supply is that the symptoms you were giving are those that we see a lot of and the cause nine out of ten times is to small or bad power supply. Yours being new this should not be the case, but even the best company let a bad one get out the door some times, for right now I am going to assume that the power is OK.
One other thing before we get to your problem, the Forum likes to see your system specifications in your post or preferred in your signature. It helps us help serive you better, note my signature, if you would had a signature like mine or Stick’s we would not of had the ask you about you power supply and could have gone directly to other causes of problem that can cause you symptoms and saved a lot of time.
Now, there have been many problems with the Diamond Plus. It is a very advance motherboard number and many people with little experience with computer are having the most problems. As you see I am building a new Diamond Plus system and I am also using a third party Hard Drive controller like you are so, I think we can talk and know what the other is saying, but just so I know what level of instructions I need to give when I ask you to do something. Wil you let know a little about yourself and computers.
First, myself and others have had problem with thrashed BIOS parameters that are not listed in the BIOS setup routine, so I would like you to Clear your BIOS as the first thing you do. However, there is a problem here to the MS-7220 MB many people have been having a problem with the reset circuit on the MB. Therefore, to insure you have a truly cleared BIOS and it will not given us problems. Unplug the AC Power and pop the battery out of the motherboard and let it set all night or at lest eight hours. I personally run around in circles for days until some one clued me in to the trick.
Second, unplug all equipment not required to start Windows and see if that has any effect on the problem. Where we are going with all this is looking for some hardware or software that is not responding fast enough or at all the in the required time Windows is giving it. Following this same line check you System Even Log for Warnings or error about hardware or services that Windows has to restart more than once or does not respond quickly enough.
Third, I have new BIOS that if you would like to try it sent me a personal message with your e-mail address and I will send you a copy.
Try all of that and let me know what you find. Do not reply only if you just still have problem, because we like to know if what we have told you worked and it helps other people who may be having your same problem.
If you do not understand any of my instructions or need more details, just reply and we will work it out.
Good luck and hope to hear from you soon.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

K8N Diamond Plus Questions?

I have a some questions about my K8N Diamond Plus. I recently replaced a K8N Neo Nforce 3 board and some other parts as well. The machine has been working very well with this new board so far but there are a few issues I’d like to get resolved.
1. Does anyone know if there is a new BIOS out for this board? I have that problem where at start up it shows that I have a new card in one of my PCI slots even though I do not….it does’nt seem to hurt the machine at all it’s just annoying….i’m wondering if they released a BIOS that corrected that?
2. On my old board I overclocked the machine with no problems at all. Now I’m no expert at over clocking but I do like to dable a little and last time I did I had no problems. This board seems like it will over clock well so I went and got better RAM….i just received some Corsair XMS 2GB DDR 400. I went into the Cell Menu to look at the options for the RAM and saw much, much more then I had on my old Neo board.
I know I need to adjust the CAS Latency, RAS# to CAS# delay, Min RAS# Active Time and the Row Precharge Time for this RAM….people have been saying that their motherboards do not detect the correct timings for this RAM (2.5-3-3-6) so you need to adjust it Manually…along with uping the Voltage to 2.7.
My question is…..do I need to worry about any other options under the MCT Timing Mode besides the 4 I mentioned above? Also…I could’nt seem to adjust the Voltage for the RAM? Every time I high lighted it and hit enter nothing would pop up for me to adjust (and it is white not gray like some things are)….is there something I’m missing that I need to shut off in order to access it???
Thanks ahead of time for anyone that can provide me with some answers.

I have not been able to find any information on those other settings. It is my current project and I am not having a great amount of success.
The defaults for them do not seam to have any adverse effect on stability the system in my signature is my MS-7220 system at FSB=225, CPU multiplier of 12, Memory/FSB =1/1 system is quite stabile if I am not playing with the BIOS settings.
I am working on, some major some minor these current problems. Watch out for number three it will flat blow your BIOS Parameters. It happens on my system every time, but I not been able to find any body that is will to trash the BIOS to verify it, so I can be sure it is a real BIOS problem or my system. “MCP Timing Mode” use to do the same thing, that where the V1.16 BIOS version came form MSI Tech Support sent my that one to fix the problem and this one looks to be the same.
1.   First boot screen the line “DRAM = 400 MHz, Dual-Channel.” It reads 400 MHz do matter what that actual memory transfer rate actually is.
2.   Cell Menu parameter “Adjust DDR Voltage (V)”, has two problems (1) the BIOS default voltage is outside the manufacture specification for normal operating range. BOIS default is 2.65V and manufacture states the Memory Module should be operated between 2.7V minimum and 2.9V maximum. (2) The voltage cannot be set to the manufactures minimum voltage of 2.7V. Starting with the BIOS default voltage of 2.65V and you press “+” key once and voltage jumps to 2.75V, press the “-“ key and the voltage jumps back to BIOS default of 2.65V.
3.   Cell Menu>Memory Configuration>User Config Mode parameter, when set to “Manual” and all of the “User Config Mode” sub-parameters left at BIOS default. The system will not boot. When I say will not boot I mean Blank Screen, no beeps, no drive activity, just case and motherboard fans come on.
4.   Menu “CPU Frequency Configuration”, parameter Adjust CPU VID. CPU correct voltage tracks the set by about 0.03V high. Example: if Adjust CPU VID to 1.375V and actual vCore voltage is about 1.405 Volts. The offset is maintained through the voltage adjustment range of the current CPU.
Roger
When submitting a problem, include a complete list of your system components; include part numbers, all Power Supply Voltages, and their output ratings. It is almost impossible to estimate what your problem is without knowing something about it.

I need help DDR voltage and latencies (K8N Diamond Plus)

I noticed my DDR voltage was incorrect in the bios and I don't know what "Auto" is doing with my timings. I have 2GB of Corsair TWINX2048-3200C2 DDR400 Memory installed on DIMM1 and DIMM2 of my K8N Diamond Plus board.
So far I've made the following changes (as my RAM's specs indicate) in the BIOS but I'm new to this (first build).
DDR Voltage 2.75V
CAS 2.0
tRCD 3
tRP 3
tRAS 6
I left everything else at it's default setting. Are there any other changes I should make?

Quote from: memeticvirus on 14-May-06, 15:41:10
I'm having an issue with the 1.10 BIOS that is preventing me from manualy setting the timings...The problem I'm having right now is deciding what BIOS to install and where to download it. Perhaps you could help me with that?
With pleasure! I had the same problem with the v1.10 BIOS, as did another member here. I flashed BACK to the v1.0 BIOS (make sure to use the command line switched (just run the batch file)) and was able to set timings, and then I flashed directly to the 3.0A BIOS and was able to adjust timings still. See my old thread here.
For my success (I don't know if any or all of these influenced it, but I'm just happy it works) in flashing I did the following:
Download the 1.0 (original) and 3.0A (latest "official") BIOS images from MSI's support site.
Downloaded the DrDos BIOS flash bootable ISO CD image from bootdisk.com
Used my ISO software to add the BIOS image files onto the ISO image.
Burned the ISO to CD.
Booted from the CD
Flashed to 1.0
Cut Power (flipped PSU switch in back), held down the CMOS reset switch button on the mobo and the power button for 45 seconds.
Powered up, set "Optimized Defaults" and set memory voltage to 2.75v and rebooted.
Set all "normal" BIOS parameters (boot devices, et al).
Windows (x64) loaded with no issues, Everest reported timings appropriately
Did the same procedure for the 3.0A BIOS, with similar success.
You can see my post or click on the link in my sig for detailed memory reports.
Quote from: RogerP on 15-May-06, 03:04:55
Are you running just one set of TWINX2048-3200C2's?
Just one pair. I fiddled with the CR and the only result was with the single known good DIMM my latency got slightly slower (like a 5ns drop), but still no love with 2 DIMMS. I think it is just dead. But this is not my story (at least not in this thread)...this is memticvirus's story.

MSI K8N Diamond Plus - Guide to my first week

OK, not a newb here, but been around the block quite a bit. MSI K8N Diamond Plus is my 5th A64 mobo (ECS K8M800, my daily undestroyed computer, K8T800, my 12 year olds gamer, Asus A8V Deluxe, first 939 system, Abit AN8 SLI, first SLI gamer, and now the MSI Diamond Plus). Had the KDP (K8N Diamond Plus) for more than a week now, and here's what I've learned.
This is state of the art again, and we have no one to blame but ourselves for the pain this causes us when we upgrade like lunatics
And as usual, the drivers and BIOS are al Dente (i.e. not cooked enought yet, a little raw)
MSI is also oddly silent on this system, which is wierd, as they are a large company, and specifically cater to enthusiasts. But their BIOS guys are MIA. Hopefully this will not be forever. Asus, ABIT, DFI, Epox are always fast with fixes
The board is a nice design, with everything basically accessible, as much as any other board. Lots of purposeful components, not too many dumb frills. No tooty fruity colors, but rather practical parts.
The new 2 piece NForce chipset is fine, and the MSI guys gave us a decent, but funky cooler. It gets a little warm to the touch when you pound on it with Prime95, or Quake4, but other than that it is fine
The manual has a zillion typos, and fortunately for us in this forum, we have shared what we've learned. The translation from Chinese to English leaves quite a bit to be desired, and hopefully, MSI will learn from Asus and Abit and get a better translation service. In 2006 this is just plain stupid, especially with a $225 board
As usual, the mobo supplied tweaker utilities are just aweful. They look like a hallucination from a Hunter S Thompson book, and they work about as well. Core center is a sad state of affairs, and the rest of them just burrow their way into your otherwise stable system and cause it to have poor behavior. And therefore as usual, the BIOS is the best way, if slowest, to tweak this bundle of parts
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
The board is clearly sensitive, which is a result of it being high strung. This is no different than any "first out" product I've ever bought. Most take 2 or 3 turns of the crank to get totally stable and forgiving. This one hated my OCZ platinum EL 2Gb kit memory, and it brought out the worst in one of the SLI based EVGA 7800 GT COs. These components worked in the Abit AN8 SLI (although not always great), but the MSI has ZERO tolerance for even the slightest pertubation from the memory. It was BSOD city until I removed both of these components by process of elimination that took probably 100 hours
Once I removed the bad components, and replaced the memory with Geil Ultra X 2x512 2-2-2-5, it worked great, ran Prime95 for 10 hours with no errors, and seems reasonably stable. I've RMA-d the bad 7800GT CO back to EVGA, and will report back on how SLI behaves when I get the new one (cross shipped of course, I haveno patience )
I also now need to replace the 2Gb RAM kit with something that the board will tolerate. I may RMA the 2Gb kit back to OCZ and try another one, but I dunno. I love OCZ but I have a bad feeling about this, even though they have great!!! support. I may try OCZ PC4000 or the RAM that Roger successfully used.
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth
Finally, I hope this board attracts more people, and therefore more tweakers that can figure out all these gadgets and settings. Everyone flocked to the Asus X16 SLI product, which is too bad, as this one needs lots o' folks to hack it up for us to figure out what is going on.
The on board Creative audio sounds lousy to my ears, and I will replace it with an Audigy 2ZS gamer that I had in the Abit. It just sounds better, but hopefully the drivers will not trash my newly stable system. Creative scares me, they scare me alot.
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
I hope this info is somewhat valuable to someone on this board. I will post details of all changes that I make, as others are doing, so we can at least take care of ourselves with this thing.

Quote from: nanohead on 15-February-06, 01:17:10
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
first of all, i do think that all the settings in the BIOS have an explanation in the manual, even if it's a basic one. if that explanation doesn't tell you everything in detail, is because if you do need a detailed explanation of the settings, you probably shouldn't be messing around with those settings.
Quote from: nanohead on 15-February-06, 01:17:10
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth.
wanna tell me how did you get 1.95V on that mobo?
Quote from: nanohead on 15-February-06, 01:17:10
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
a 0.5V bump? again, you must be joking. maybe 0.05V.

K8N Diamond Plus

Beta BIOS for K8N Diamond Plus (MS-7220, PCB 1.0)
BIOS Sign-on message: MSI Project A7220NMS V1.34 04/23/07 (Date: 04/23/2007)
Attachment name: A7220NMSv134.zip
Make and ensure PC is stable before proceed. Remove any OC temporary if you have.
Use Beta or Modded BIOSes at own risk!
flash BIOS from USB key, by using our Tool(easy & safe way to flash):
MSI Forum HQ USB Flashing Tool

Hello,
I just installed the bios 1.34 on my K8N Diamond Plus MB. Everything went ok with the flash USB utility program.
Has anyone had trouble Disabling PCI ... and/or SATA ... Speed spectrum?
Everytime I try to disable them the computer freezes and restarts.
I did unplug the power cable and cleared the cmos by pressing the clear cmos button on board and all that good stuff.
Granted it's a beta Bios but just wanted to know if anyone else having that problem.
Sorry for bring this old topic back up. Didn't know if I should start another topic or posted in here. So please be kind
Bluephoenix

CPU Usage 100%? K8N Diamond Plus

Never before have I witnessed the CPU being used at it's absolute maximum. It has been occuring regularily with my system. I noticed it first when my screen saver started getting jittery. This seems to occur most often about 1-2 minutes after windows finishes loading. It seems kind of odd to me that this occurs during typically idle system times. The memory usage also dramatically rises during these spikes, using ctrl+alt+delete I noticed svchost.exe to be the culprit of the memory usage atleast. The hard drive doesn't appear to be active when these events occur. Is this normal for this motherboard, or is this something that should be corrected?
I've always had 3 short beeps upon startup with this board, but it has never stalled the boot process. Anyone know what this means?
I've upgraded my board somewhat recently and carried over the CPU and memory from a older MSI model that used the same type. Could it be possible either or both are incompatible?
Also one, somewhat less important problem. First off I must say that the PS/2 power on feature is pretty cool. I used it with a wireless keyboard so I could turn on my PC from my living room HDTV (I have my comp wired through Y/Pr/Pb cables). Only problem is about one in every 4 or so shutdowns the system restarts immediatly when this feature is selected in the bios. Bios issue maybe?
System Info (and everything directly connected to it):
(pretty sure not all of this is relevant, but I figure it couldn't hurt)
MoBo: MSI K8N Diamond Plus
Memory: 1Gb (2x512 kit) Crucial PC3200 CT6464Z40B.C8TD (in slots 1 & 2)
Processor: Athlon 64 3200+ Winchester
GPU (only one): MSI NX7900GT-VT2D256E-HD (primary PCI-e)
Modem: SupraMax LE 56K Fax Modem (PCI)
HDD: WD Caviar 120Gb IDE (primary)
HDD: Maxtor 80Gb USB (external, non system)
3.5: Standard 3.5" floppy drive (a:)
5.25: Lite-on 48x CD burner (secondary slave)
5.25: Sony DVD rom (secondary master)
PS: Antec SmartPower 2.0 500W
Human Interface: Wired Logitech KB & Mouse through USB (for primary use)
Human Interface: Wireless Logitech KB & Mouse through PS/2 (for remote use, often turned off)
Primary Monitor: Viewsonic P70f 17" CRT hooked to DVI #1 via RGB adapter
Secondary Monitor: Sony KDL-V32XBR1 32" HDTV through 1080i Y/Pr/Pb adapter, stereo audio
Speakers: harman/kardon
Connected to internet via Cat5 network, phone modem sometimes used when primary internet is down
OS: Windows XP Pro w/ SP 2 installed
Thank's in advance to anyone that can help me as I'm pretty much stumped at this point.

Quote from: mdawgmike on 11-November-06, 11:25:18
Any other suggestions?
how about this:
Quote from: BOSSKILLER on 03-November-06, 23:14:30
get Process Explorer to determinate in details what make this CPU usage: http://www.sysinternals.com/Utilities/ProcessExplorer.html
it has more detailed information than the built-in task manager.

K8N DIamond Plus- 4 sticks of memory problem

I have a new Opteron 180 with a K8N Diamond plus mb. I am thinking about getting another 2g of memory to run with my current 2g of 3200 memory to speed up Vista even more. I thought the new chips could run 4 sticks of memory at 400 with a command rate of 2t. I wanted to try to see if it would work so I pulled two 512 pc3200 sticks from my wifes computer and installed it. At boot up it clocked the memory to 333 (which I expected it to actually) and I got into the bios and set it to 400 with 2t command rate and everything else at default settings. All the memory is Kingston value ram. The computer randomly booted and I had lockups at 400, but at 333 it ran fine, but I still couldn't run the memory at 1t with 333. I am using bios 1.33 as the other bios's always set the HT bus wrong for me. Is this just a function of the motherboard or is the memory not compatable with each other? I thought the motherboard is irrevelant since the memory controller is on the cpu?
Thanks for your help,
Scott

The memorycontroller IS inside the CPU.
And some are lucky to get it stable booting at DDR400 with 4 sticks, some get crashes.
However, most have drop-backs to DDR333.
It's a CPU limitation when using unbuffered memory.
Buffered memory should be able to do it, however, I'm not quite sure as this is an S939 type CPU.
You could try something if you know somebody that has buffered memory.
Sometimes it helps if you lower the other timings.

2 'problems' with the K8N Diamond Plus

Hi there.
I just bought a K8N Diamond Plus and I'm having some troubles installing my system in conjunction to my Decklink Extreme PCI-E ( http://www.decklink.com/products/sd/ ).
Here's my configuration:
MSI K8N Diamond Plus
AMD64 X2 4400+
ROSEWILL 6600GT PCI-E VGA
Decklink Extreme PCI-E
2GB RAM ( 2 x 1gb) Kingston
OCZ-520 12U Modstream Power Supply
plus 6 HD's (7200rpm) and 1 DVD-+RW
The problem is, when I try to initialize the system with the Decklink, which it's a PCI-E 1x, it just don't boot. Neither putting the Decklink on the 1x, nor in the 4x slot and nor in the 16x.
The Decklink is working just fine in another system and doesn't seem to be a problem with this card.
I wondered if there's any limitation in the K8N Diamond Plus with working with the ROSEWILL 6600GT PCI-E VGA plus the Decklink.
=======================
The other thig is that when I take off the Decklink, the system boots normaly but a message appears while booting: "Not enough space to copy PCI option ROM 00:13:00".
And I don't have a clue about what's going on.
=======================
Please enlighten me with this questions if possible.
Thank you very much.
Greets.
Igor Bineli

Remove the battery away for 10 minutes, clear CMOS, start the system to load setup/optimized defauts in bios setup. After that, disable all onboard items in bios setup that you won't to use. Save and exit.
Plug ROSEWILL 6600GT PCI-E VGA card, and start your system to check if there is the error message. If there is, borrow another brand VGA card to do a test.
Besides, update your MB bios and driver version to the latest one.

Soundblaster Audigy on MSI K8N Diamond Plus, Sound Linked? vs Audigy2 ZS?

Had a couple of quick questions regarding the Soundblaster Audigy onboard chip on my MSI K8N Diamond Plus. I have the audio connected to a front panel, and when I try and change the Right or Left speaker volume balance in Windows (by going to volume control and dragging the balance slider right or left), the volume slider goes down and the balance slider snaps back to center. As in my previous post, I had some damage to my front panel connector pins and wanted to make sure this wasn't a hardware issue requiring a replacement of the board.
Also, I have a Soundblaster Audigy2 ZS card from my previous system, and I was wondering if it added anything the onboard Soundblaster chip doesn't provide. I was thinking of installing it, but if the onboard audio does everything the card would, I'd rather just use the onboard solution.
Thanks.

Quote from: syar2003 on 21-August-06, 06:59:38
Onboard creative is just live24 marketed as Audigy SE
live 24bit is an audigy SE striped down of some features.

K8N Diamond Plus, SLI and Creative X-Fi cards, anyone running similar?

Hi there!
I've got an ASUS A8N32-SLI board and my X-Fi card does not work with it, nor does it for many other people with similar setups.
See here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=31426
and here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=26289
I get crackling and popping noises when running most games, e.g. BF2, Fear, FarCry. When my 2x7800GTX's are in SLI mode it crackles loads, e.g. start far cry, click options, and listen. When i disable SLI mode it crackles less, but it still crackles. Many others encounter similar issues with their systems that are not identical but the symptoms are similar - high load = crackling/popping.
My question is:
Is anyone here sucessfully running any X-Fi card (music, fatality, elite pro, etc) with 2x video cards and NO crackling/popping in BF2, FEAR and FarCry?
I've already had a replacement X-Fi card from creative which their tech guy said "should" fix it, lol, I'm wondering wether to replace my A8N32-SLI with an K8N Diamond Plus to fix the problem. Besides, the MSI board has better PCI slot location and works with nTune too unlike the ASUS board.

What's going on guys.
I hate to see peep's having soooo many prob's and it sucks major BALLZ. The reason why I'm reposting is that I encountered a new issue. Not with my rig, but a friend's.
We pretty much have the same setup. Differences are he's using 2GB of Corsair DDR400 (which is picking up as DDR333 as well), different branded video cards (I'm running two EVGA 7800GT's in SLi, he's running two BFG 7800GT's in SLi), XFi Platinum (me, Fatality Edition) and he's got a dedicated ITE RAID PCI card for his RAID from his previous rig. Configured his BIOS pretty much the same way I have it running (he wanted to Overclock his AMD x2 4400+ to 2.6 GHz), but when it came to installing Windows we kept getting BSOD's during installation. Looked over things numerous times and it didn't make sense. We resetted the BIOS to default settings and Windows went through without a hitch. We tried OC'ing it one more time and Windows was fine. But, when he installed and ran Quake 4, either Windows or the game would just lock up. He booted back into the BIOS and put the CPU back at stock frequency of 2.2 GHz. Game ran flawlessly afterwards. That points at the processor. The only differences were we both have different stock fans and his CPU was manufactured in July '05. Mine in Sept '05. His rig also reports the infamous "Phantom" PCI modem as well.
Quake 4 is the only game he's got installed so far, but he reports everything is set to their highest qualities, including resolution. He said it runs great with no anomalies. He's going to install Dawn of War and Winter Assault later I know.
Me? I haven't run into any issues with any games either, including F.E.A.R. as Hydrasworld asked. Both of our sound cards are in the Communication PCI Slot of the motherboard. My take on the OC issue is since we're using different proc's from different wafers, maybe my chip had revisions in September that the July proc my friend has didn't. Also, his heatsink has one less copper pipe I noticed. I'll still drop by for help. Good luck to you all and the only other thing I can add is try using the latest drivers for each piece of hardware you've got.
LPB
P.S. If you can and you purchased a retail version of the processor, on one of the sides of the carton insert for the processor, a date should be printed. Maybe that can explain some issues. Once more, my proc was manufactured September 15th, 2005.

K8N Diamond Plus, Line-In & AVerMedia Studio .103

Similar Messages

Maybe you are looking for