K8n diamond plus no audio after connecting Avermedia/Hauppauge tv card

k8n diamond plus
Avermedia mce m1a2 tv dual tuner
windows xp mce
after connecting the tv tuner card there is no more audio at the speaker output.
(the same problem occurs with a Hauppauge tv pvr 500)
the headphone output is still working.
is there someone who knows how to solve this problem ??

Found it here ! it works
http://forumz.tomshardware.com/hardware/k8N-Diamand-Sound-ftopict183919.html

Similar Messages

K8N Diamond Plus, Line-In & AVerMedia Studio .103

Hello,
I got K8N Diamond Plus and AVerMedia Studio .103 audio out connected to my onboard sound device's (Audigy) Line-in. I don't know how to describe the situation but I'll try. The problem is that the captured audio is some kind of wavey like an old "record", the sound is cry-like especially when there's a music in the background.
It is really annoying to have such a problem with this kind of expensive product. I'm sure it's not TV Card related because I use it for 5 years now with the same OS, Application, Drivers and cable. The day I upgraded my system I met this trouble. I've searched for driver updates, chipset updates related to this issue but couldn't find any. I tried every possible option/configuration with the sound card and no hope.
I think it is because that the line-in is also used as an output with the 4 speaker configuration. Every passed day with this issue I add spoilt videos to my archive and this upsets me.
Thanks for your help and concerns
Yours respectfully
M. Erke Tiryakioglu

Quote from: syar2003 on 30-April-06, 17:46:53
The line-in only has dual fuction in 8 speaker sw config (7+1) .
With 5.1 and lower the numbered jack #1 is only having line-in config.
Make sure you have correct Multi-Channel Audio Function mode properly selected in the software
utility for your speaker connections/configurations.
And use the Creative web update to have the laterst drivers and software .
First of all thanks to all of you guys...
Secondly, I was just trying to point out that may be the dual-function support (doesn't matter when) is doing this...
And yes I am using windows XP as it says in my signature, but thats not an issue since i used this card (AverMedia) with XP pro for four years with no problem.... I can't say anything about the dual-core tho...
BTW I tried to manually update the audigy from creative's web site, but couldn't be sure if I had to download the Audigy drivers or should I use MSI's web site for my sound device, since it's on board? Or is there a version in the Creative web site to, or even the audigy drivers itself may be? Do you have any suggestions? MSI doesn't have an update tho I know that..

K8N Diamond Plus audio out problem

Hi,
I'm having an issue with the audio out on my K8N Diamond Plus. The rear audio out works fine when left jumpered. However when I connect the front panel audio connector to the mother board the volume of the rear audio out drops to an almost in audable level while the front panel audio works as expected.
At first I thought the rear audio had been completely disabled until I tried turning my speakers all the way up.
Is there a software issue here?
FYI I'm trying to use the front pannel audio connection on a Silverstone TJ07 case.

hey - mikein_texas here - i have same board but with a Centurion case -
couple of things i ran into - maybe will spark some ideas
initally i hooked up front panel audio and got nothing
then i read on page 2-19 of manual that 5-6,9-20 have to be jumpered for rear audio to work
but that means no front audio which was a drag - but solved that prob with usb mike and headphones
apparently unless i am reading it wrong and someone please correct me if so, but you can have front audio OR rear audio
BUT not both
again look at page 2-19 in manual and specifically at text in grey box in middle of page
Yukon PXE 2.01 ( 20040406 )
Pre-boot Execution Environment PXE v.2.1
DLink Cable Modem - model DCM-202
ViewSonic VX2025WM 20.1" Widescreen TFT LCD - 1680x1050, 800:1, 8ms
MSI K8N Diamond Plus Socket 939 NVIDIA nForce4 SLI X16 ATX AMD
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive Model SFD321B/LBL1
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s
XFX Geforce 7600GT PV-T73G-UDD3 Video Card
SAMSUNG 16X DVD±R DVD Burner - 5X DVD-RAM Write and LightScribe Black ATA/ATAPI Model SH-S162L/BEBN
COOLER MASTER Centurion 532 RC-532-SKN1 Black Computer Case
AMD Opteron 165 Denmark 1000MHz HT 2 x 1MB L2 Cache Socket 939 Dual Core
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400
Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
Ultra ULT31849 X-Finity 600W Power Supply
Cooler Master A12025-12CB-5BN-L1- 120 x 120 x 25mm 1200rpm, 43cfm, 22dBA, LED, 3-pin - front intake case fan
Scythe S-FLEX SFF21F 1,600rpm, 49.0CFM, 20.1dBA, 3-pin, 120mm S-FDB Bearing - rear exhaust case fan

K8N Diamond Plus Audio Problem

New rig - have the K8N Diamond Plus, AMD 64 X2 4400+, Logictechz5300-e speakers. When testing audio - the front speaker channel does not work - the center and rear are fine - tested to make sure it wasn't the speakers - definitely a mobo problem. Have tried it set to 5.1, 6 and 8 channels. Has anyone else experienced this issue??
Thx

The audio signal from DVD or CD is passingthrough IDE CABLE digital..(When listen CD audio).Now with X-FI you must buy(of corse if you have the money) 7.1 audio speakers like mine(gigaworks s750) to take full advance of your card.Believe me you won't regret it!.
http://images.europe.creative.com/iss/images/artwork/a6_rgb/GigaWorks_S750_c.jpg
http://images.europe.creative.com/iss/images/artwork/a6_rgb/DDTS_100_c.jpg

K8N Diamond Plus' Audio drivers 4 Vista RC1???

Guys i need to find drivers for RC1 Vista for my built in Mother board creative Audigy SE on K8N Diamond Plus. Can any one help me where to find these drivers????????

well i installed the vista RC1 and downloaded the Audigy Se's vista RC1 drivers from creative's web site and i installed it on my system and it detected my motherboard's audigy SE as audigy live 24 bit but there was no sound so i updated the driver and i gave the path of my window's xp driver and it worked for windows vista RC1. and my sound card is now dectected as audigy SE not live 24 bit. thanks to msi for making a driver which works with both xp and vista RC1. i ll try to install the Xp's driver directly on Vista with setup.exe, and will see if this will give me all the sound configrations which we do see in windows xp. But i still request MSi to provide us good vista drivers.
I have one question,
CAN WE INSTALL AUDIGY SE's DRIVERS DOWNLOADED FROM WWW.CREATIVE.COM FOR AUDIGY SE BUILT IN SOUND CARD OF DIAMOND PLUS MOTHERBOARD(FOR WINDOWS XP) ?

CPU Usage 100%? K8N Diamond Plus

Never before have I witnessed the CPU being used at it's absolute maximum. It has been occuring regularily with my system. I noticed it first when my screen saver started getting jittery. This seems to occur most often about 1-2 minutes after windows finishes loading. It seems kind of odd to me that this occurs during typically idle system times. The memory usage also dramatically rises during these spikes, using ctrl+alt+delete I noticed svchost.exe to be the culprit of the memory usage atleast. The hard drive doesn't appear to be active when these events occur. Is this normal for this motherboard, or is this something that should be corrected?
I've always had 3 short beeps upon startup with this board, but it has never stalled the boot process. Anyone know what this means?
I've upgraded my board somewhat recently and carried over the CPU and memory from a older MSI model that used the same type. Could it be possible either or both are incompatible?
Also one, somewhat less important problem. First off I must say that the PS/2 power on feature is pretty cool. I used it with a wireless keyboard so I could turn on my PC from my living room HDTV (I have my comp wired through Y/Pr/Pb cables). Only problem is about one in every 4 or so shutdowns the system restarts immediatly when this feature is selected in the bios. Bios issue maybe?
System Info (and everything directly connected to it):
(pretty sure not all of this is relevant, but I figure it couldn't hurt)
MoBo: MSI K8N Diamond Plus
Memory: 1Gb (2x512 kit) Crucial PC3200 CT6464Z40B.C8TD (in slots 1 & 2)
Processor: Athlon 64 3200+ Winchester
GPU (only one): MSI NX7900GT-VT2D256E-HD (primary PCI-e)
Modem: SupraMax LE 56K Fax Modem (PCI)
HDD: WD Caviar 120Gb IDE (primary)
HDD: Maxtor 80Gb USB (external, non system)
3.5: Standard 3.5" floppy drive (a:)
5.25: Lite-on 48x CD burner (secondary slave)
5.25: Sony DVD rom (secondary master)
PS: Antec SmartPower 2.0 500W
Human Interface: Wired Logitech KB & Mouse through USB (for primary use)
Human Interface: Wireless Logitech KB & Mouse through PS/2 (for remote use, often turned off)
Primary Monitor: Viewsonic P70f 17" CRT hooked to DVI #1 via RGB adapter
Secondary Monitor: Sony KDL-V32XBR1 32" HDTV through 1080i Y/Pr/Pb adapter, stereo audio
Speakers: harman/kardon
Connected to internet via Cat5 network, phone modem sometimes used when primary internet is down
OS: Windows XP Pro w/ SP 2 installed
Thank's in advance to anyone that can help me as I'm pretty much stumped at this point.

Quote from: mdawgmike on 11-November-06, 11:25:18
Any other suggestions?
how about this:
Quote from: BOSSKILLER on 03-November-06, 23:14:30
get Process Explorer to determinate in details what make this CPU usage: http://www.sysinternals.com/Utilities/ProcessExplorer.html
it has more detailed information than the built-in task manager.

Soundblaster Audigy on MSI K8N Diamond Plus, Sound Linked? vs Audigy2 ZS?

Had a couple of quick questions regarding the Soundblaster Audigy onboard chip on my MSI K8N Diamond Plus. I have the audio connected to a front panel, and when I try and change the Right or Left speaker volume balance in Windows (by going to volume control and dragging the balance slider right or left), the volume slider goes down and the balance slider snaps back to center. As in my previous post, I had some damage to my front panel connector pins and wanted to make sure this wasn't a hardware issue requiring a replacement of the board.
Also, I have a Soundblaster Audigy2 ZS card from my previous system, and I was wondering if it added anything the onboard Soundblaster chip doesn't provide. I was thinking of installing it, but if the onboard audio does everything the card would, I'd rather just use the onboard solution.
Thanks.

Quote from: syar2003 on 21-August-06, 06:59:38
Onboard creative is just live24 marketed as Audigy SE
live 24bit is an audigy SE striped down of some features.

Someone tell me it aint so: K8N Diamond Plus nForce4

simple really work were buying a job lot of computer bits and pieces so i thought might as well bung a few things on for myself and take advantage of the discount, so a new mobo, memory, and graphics card ive got more than enough spares hdd, fans, dvd/cd drives
took all the stuff home tonight thought i would stick it altogether leave it installing with baby sitter and go pub. So build it and then look at it strangly thinking im missing something then it hits powersupply, bugger how could i forget the powersupply have no fear i'll just take it out of my other rig. so out it comes and i start connecting it all up then i come accross the 12v cpu connecter and i begin to search for a 4 pin connection on my shiny new mobo and what do i find a bloody 8pin one.
The mobo in question is MSI K8N Diamond Plus, nForce4 SLI X16, Socket-939
The power supply in question is found in my sig
My questions is am I screwed, will i have to wait till monday to order a new power supply then wait till it gets delivered or can i just ignore the little factor of 4pins into 8 doesnt fit slap it in switch on and not have the computer start blowing smoke at me. im suspecting a long wait till monday and a longer wait till delivery but stranger things have happened in the computer world

Quote from: thorpe on 17-June-06, 18:13:01
i'll be honest i was thinking your all bonkers
that's not a nice thing to say
Quote from: thorpe on 17-June-06, 18:13:01
got the wife to press the power on button
roflmao this is the best part. i think we should all make our wifes/girlfriends (or the male equivalents) to push the button after a heavy OC or after messing around with the system. that way you can blame it on them if something happens

K8N Diamond Plus BIOS problems

Hi , just replaced my lanpartyUT sli-dr expert with K8N Diamond Plus mobo and having problems allready :D
Just finished overclocking and now running at (250 x 11 x 800mhz x 1.300v+0.2v x dram/fsb 1/1 x 2.80v)
Memory timings --> (3,7,14,3,2,8,2,2,1,3,200mhz(15.6us),1,16x,7x,7ns,5ns,0clk,DiCC:enabled,1T,8beats,reduce 00%... ...)
The problem is "BOOT" related... System is PRIME95 stable , but still when trying to "restart windows" or "reset" the system wont BOOT !!?
When i shutdown and then power up, the system boots perfectly !? What can cause this kind of behaviour :/
I have OC:d quite many systems , but this is new even to me

The windows core program shows htt link 1000mhz exact. Memory settings are all "manually" adjusted. Cpu vcore is 1.300 & extra voltage 0.2v=1.5v.
All ECC options are disabled.Hdd:s adjusted manually. Should i rise the (NB) voltage , or does that have anything to do with this !? Maybe not at 250fsb only :D Cool & quiet is disabled naturally :/ All fan controls disabled , connected directly to psu. No D.O.T,s or anything automatic overclocking enabled. The (L cache & data cache scrubs) are strange to me, so those are disabled.After flashed bios , enabled boot sector protection. All the mobo power connectors are in use (24pin+8pin+4pin) Could it be that the memory modules should be used on ports 3 & 4 (now on 1 & 2) ??
The mushkin redline xp4000 memory specs Fortron Epsilon 700W Psu specs
Output Voltage Min. load Max. load      Load Reg.     Ripple & Noise
Frequency:   500MHz +5V     0.5A     30.0A     +-5%     50mV P-P
Latency:   3-3-2-8 +12V1   0.0A     18.0A     +-5%     120mV P-P
Parity:   Unbuffered +12V2   0.0A     18.0A     +-5%     120mV P-P
Voltage:   2.6V-2.9V +12V3   0.9A     18.0A     +-5%     120mV P-P
Module:   128MX64 +12V4   0.1A     18.0A     +-5%     120mV P-P
Chip:   64MX8 +3.3V   0.8A     36.0A     +-5%     50mV P-P
Pins:   184 -12V     0.0A     0.8A     +-10%     120mV P-P
+5Vsb   0.0A     3.0A     +-5%     50mV P-P

Help! My K8n diamond plus wont start!

HELP! I've bought a MSI k8n diamond plus mother board, and it woont start, i've tested all my other hardware on my other computer, and it works fine. When i'm turning on my computer, it shuts down after a second. What is the problem?
/Jeppe

Quote from: Jeppar on 31-May-06, 21:15:19
What does it mean if it has a short...
There is a 12 Vatx Connecter on my motherboard with 8 pin, but on my power supply theres only four, i've connected it anyway, and it fits in, on the half of the connector.
Could that be the problem?
I use the same type of connectors, no need for converters.
I too have only 4 pins out of the 8 on the board connected, no problem at all....
And yes I do overclock
But big chance it's the PSU that can't cope, it has only 14A @ 12V1 & 18A @ 12V....not very much for a 500W....
Also, try to boot with just 1 stick of memory in slot 1.

K8N Diamon Plus - Optical Audio

Heya Peeples
I've got the MSI K8N Diamond Plus mobo, which I am using in an HTPC.
Currently I am reduced to using the rear audio jack (the green one) because for some reason the Optical SPDIF doesn't seem to work.
I have it connected into my Denon AVR-2105, and I know that its neither the AVR thats the problem nor the cable because I connected the PS2 and it worked fine.
It is also obviously not the JAUD1 header not being jumpered correctly because the rear audio jacks are working happily.
Help!?!?!
PLEASE!!!!!

Of Course, sorry guys - I'm used to having my system specs in my sig (in the AMD forum).
This box includes:
CPU: AMD Athlon X2 4200+
RAM: 4 x Kingston 512MB PC3200
VGA: MSI NX6800GT 256MB (only one)
PSU: Antec True Control II 550W (all voltages etc set at standard, only PSU fan slowed)
DTV: Leadtek Digital TV capture card
Case: Thermaltake Soprano
Input: Logitech MX3100 wireless/laser combo
HDD: 4 x Seagate SATA2 250GB in Raid5
DVD: LG DVD/CD Burner
FDD: Panasonic 3.5"
The video outputs to the SVGA input of my Sony Plasma Tuner.
Audio outputs to my Denon AVR-2105 AV Receiver.
BIOS is (I think) version 1.1 - I updated it to the latest one about 3 or 4 weeks ago, at which time I also updated all other BIOS and Drivers available.

MSI K8N Diamond Plus - Guide to my first week

OK, not a newb here, but been around the block quite a bit. MSI K8N Diamond Plus is my 5th A64 mobo (ECS K8M800, my daily undestroyed computer, K8T800, my 12 year olds gamer, Asus A8V Deluxe, first 939 system, Abit AN8 SLI, first SLI gamer, and now the MSI Diamond Plus). Had the KDP (K8N Diamond Plus) for more than a week now, and here's what I've learned.
This is state of the art again, and we have no one to blame but ourselves for the pain this causes us when we upgrade like lunatics
And as usual, the drivers and BIOS are al Dente (i.e. not cooked enought yet, a little raw)
MSI is also oddly silent on this system, which is wierd, as they are a large company, and specifically cater to enthusiasts. But their BIOS guys are MIA. Hopefully this will not be forever. Asus, ABIT, DFI, Epox are always fast with fixes
The board is a nice design, with everything basically accessible, as much as any other board. Lots of purposeful components, not too many dumb frills. No tooty fruity colors, but rather practical parts.
The new 2 piece NForce chipset is fine, and the MSI guys gave us a decent, but funky cooler. It gets a little warm to the touch when you pound on it with Prime95, or Quake4, but other than that it is fine
The manual has a zillion typos, and fortunately for us in this forum, we have shared what we've learned. The translation from Chinese to English leaves quite a bit to be desired, and hopefully, MSI will learn from Asus and Abit and get a better translation service. In 2006 this is just plain stupid, especially with a $225 board
As usual, the mobo supplied tweaker utilities are just aweful. They look like a hallucination from a Hunter S Thompson book, and they work about as well. Core center is a sad state of affairs, and the rest of them just burrow their way into your otherwise stable system and cause it to have poor behavior. And therefore as usual, the BIOS is the best way, if slowest, to tweak this bundle of parts
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
The board is clearly sensitive, which is a result of it being high strung. This is no different than any "first out" product I've ever bought. Most take 2 or 3 turns of the crank to get totally stable and forgiving. This one hated my OCZ platinum EL 2Gb kit memory, and it brought out the worst in one of the SLI based EVGA 7800 GT COs. These components worked in the Abit AN8 SLI (although not always great), but the MSI has ZERO tolerance for even the slightest pertubation from the memory. It was BSOD city until I removed both of these components by process of elimination that took probably 100 hours
Once I removed the bad components, and replaced the memory with Geil Ultra X 2x512 2-2-2-5, it worked great, ran Prime95 for 10 hours with no errors, and seems reasonably stable. I've RMA-d the bad 7800GT CO back to EVGA, and will report back on how SLI behaves when I get the new one (cross shipped of course, I haveno patience )
I also now need to replace the 2Gb RAM kit with something that the board will tolerate. I may RMA the 2Gb kit back to OCZ and try another one, but I dunno. I love OCZ but I have a bad feeling about this, even though they have great!!! support. I may try OCZ PC4000 or the RAM that Roger successfully used.
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth
Finally, I hope this board attracts more people, and therefore more tweakers that can figure out all these gadgets and settings. Everyone flocked to the Asus X16 SLI product, which is too bad, as this one needs lots o' folks to hack it up for us to figure out what is going on.
The on board Creative audio sounds lousy to my ears, and I will replace it with an Audigy 2ZS gamer that I had in the Abit. It just sounds better, but hopefully the drivers will not trash my newly stable system. Creative scares me, they scare me alot.
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
I hope this info is somewhat valuable to someone on this board. I will post details of all changes that I make, as others are doing, so we can at least take care of ourselves with this thing.

Quote from: nanohead on 15-February-06, 01:17:10
Which brings us to the BIOS. IMHO, the worst one I've seen on a high end board. ZERO explanation for half the settings (this is not strange in and of itself, BIOS is still a black art, but in a tweakers board, we should have some basic explanation )
There seem to be adequate settings in the BIOS for all sorts of doodads and gizmos, but who the heck knows what half of them are. Roger points out rightfully, that we now need to "Tune" across all these different intermediary bus structures and test. But with the lack of info from either NVidia, MSI or anyone else for that matter, its kinda hard to know where to start.
first of all, i do think that all the settings in the BIOS have an explanation in the manual, even if it's a basic one. if that explanation doesn't tell you everything in detail, is because if you do need a detailed explanation of the settings, you probably shouldn't be messing around with those settings.
Quote from: nanohead on 15-February-06, 01:17:10
I did upgrade to the 1.16 BIOS, and found that some new things were added, as well as voltage control in Cell was a little better, but registration of changes in voltage is still a disaster. I adjusted a bunch of times, it didn't register, and I ended up smoking a new A64 3700+ Diego with 1.95 volts, even though the BIOS claimed it was 1.53. I had to rebot to see what was going on. The Thermalright XP-90 kept the proc from melting down through the earth.
wanna tell me how did you get 1.95V on that mobo?
Quote from: nanohead on 15-February-06, 01:17:10
I've been able to get the CPU up to 2.4Ghz, with a .5 volt bump to the CPU and 2.9 volts into the Geil memory. So far, so stable, no smoke coming out yet
a 0.5V bump? again, you must be joking. maybe 0.05V.

2 'problems' with the K8N Diamond Plus

Hi there.
I just bought a K8N Diamond Plus and I'm having some troubles installing my system in conjunction to my Decklink Extreme PCI-E ( http://www.decklink.com/products/sd/ ).
Here's my configuration:
MSI K8N Diamond Plus
AMD64 X2 4400+
ROSEWILL 6600GT PCI-E VGA
Decklink Extreme PCI-E
2GB RAM ( 2 x 1gb) Kingston
OCZ-520 12U Modstream Power Supply
plus 6 HD's (7200rpm) and 1 DVD-+RW
The problem is, when I try to initialize the system with the Decklink, which it's a PCI-E 1x, it just don't boot. Neither putting the Decklink on the 1x, nor in the 4x slot and nor in the 16x.
The Decklink is working just fine in another system and doesn't seem to be a problem with this card.
I wondered if there's any limitation in the K8N Diamond Plus with working with the ROSEWILL 6600GT PCI-E VGA plus the Decklink.
=======================
The other thig is that when I take off the Decklink, the system boots normaly but a message appears while booting: "Not enough space to copy PCI option ROM 00:13:00".
And I don't have a clue about what's going on.
=======================
Please enlighten me with this questions if possible.
Thank you very much.
Greets.
Igor Bineli

Remove the battery away for 10 minutes, clear CMOS, start the system to load setup/optimized defauts in bios setup. After that, disable all onboard items in bios setup that you won't to use. Save and exit.
Plug ROSEWILL 6600GT PCI-E VGA card, and start your system to check if there is the error message. If there is, borrow another brand VGA card to do a test.
Besides, update your MB bios and driver version to the latest one.

Clicks with K8N Diamond Plus

Guys,
Maybe some one here can solve this one.
As you can see in my sig: I have a K8N Diamond Plus board and I love it! Rest of the specs are in my sig as well. I have a weird thing with it for some time, but it seems to be getting worse or, putting it right, it occurs more and more.
The pc is running just fine. Sometimes there's coming two clicks out of the case, about 1/2 a second after each other. It sounds like a mechanical something, but I'm unable to locate where it comes from. The pc simply keeps on working. No hangs, no BSOD's, it's fine. The only thing is that the sound is interupted shortly with each click.
To make it visible:
------------------click-----click-------------
- = computer noise
# = music playing
When I watch a movie, the same happens. Video-playback, however, isn't interupted at all.
Does anyone have any suggestion what this could be?
Thanks!
Hans
PS: I had a simular setup first with the K8T Neo2 board. The problem never occured with that board, so I asume it's the mobo that's doing this somehow.

Quote from: Hans on 20-December-06, 18:37:28
Well, I'm unable to find any problems. There's no data losses or whatever.
@Bosskiller: are you saying that this could be normal?
Do you know if WD Raptors make this sound? Or maybe Seagate Barcuda's (SATA-II)?
The more I try to locate the sound, it looks like it's one of the Raptors (or both).
yes sound normal for me, for Raptor don't know, for seagate think no, HITACHI(my currently doing the same), and Maxtor(DM 9 got before also making click/click)

K8N Diamond Plus and SLI

I have the Diamond Plus MB with (2) MSI NX7900GTX-T2D512E Graphic cards and the SLI bridge connecting them. Everything runs great until I enable the SLI in the NVidia display properties. I check the box and as soon as I hit the apply or ok button my system reboots. When I check the display properties after reboot the box is unchecked. Graphics driver is ver 84.43 I really expected the cards to work great with the MSI MB, but so far that's not the case. Any Ideas?

^ Echo the power-supply response. I'm not sure what the specs on your PSU are, but you might want to check it. If it's dual-rail, then you could be having a problem. Random reboots when graphics are involved usually means PSU.
Also make sure your PCI-E connector on your motherboard has power. There's a 4-pin connector on the upper-left of your first PCI-E x 16 slot that needs power if running dual graphics. Check your motherboard manual if you're not sure which one it is.
Go here: http://www.slizone.com/object/slizone2_build.html
.. for a list of compatible power supplies for your setup. I'm running a Silverstone Zeus ST56ZF which is one of the few PSU's certified for SLI 7900GTX's, even though I'm running a single 7900GTX, so I can overclock the CPU and GTX all I want.

K8n diamond plus no audio after connecting Avermedia/Hauppauge tv card

Similar Messages

Maybe you are looking for