K8N Diamond Plus Power on problem

I have this problem with the board where I shut down windows, and it does shut down by the way. But the strange thing is that right after it powers down, like say a second, it restarts itself as if I pressed the power button immediately after. Though I can correct this by pressing power again while it is still going through the motherboard check ups, I was wondering if someone had similar problems. If so, if there is a solution to correct this bug?
I am currently using the 1.16 version patch.

CPU=Opteron 170
Motherboard=MSI K8N Diamond Plus
Videocard=Sapphire X800GTO2
Soundcard=Creative X-Fi
Hard drive= 2x RaptorX 150GB @ Raid 0
PSU=OCZ Powerstream 600
CPU Cooler=Zalman CNPS 9500LED
3x 80mm exhaust fan
1x 120mm intake fan
1x Vortex 2 Intake crossblower
1x Slot Exhaust
1x Antec Vcool Intake
I'll check on that wake lan thing.

Similar Messages

MOVED: K8N Diamond Plus Motherboard overclocking problem.

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=93776.0

Quote from: TimeReaper on 15-February-06, 09:15:17
I know this board can reach 300+ by reviews by Tom's Hardware. But I was wondering how I could get my FSB up there? I can't seem to get past the hurtle at 270. Anything above this will make the system fail to start up and I have to clear the BIOS again.
I lowered the HT to the equivalent of 3X, and CPU Multiplier to 8X using a venice core 3500+. I even tried adding voltage to the HT. I'm wondering if I'm missing something in this equation that stops me from getting 300+ FSB? The overclockable items are too many and unexplained.
If someone could spread some light on what else needs to be done, please tell me.
My system is as follows.
MSI K8N Diamond Plus
AMD64 3500+ Venice
OCZ DDR600 Platinum Elite
520 OCZ Powerstream
2x Samsung 200G@Raid 0
Zalman CNPS 9500 LED
Sapphire GTO2
Hi dude,
I have the similar problem as well. Sounds like you are in the bad shape, but yeah, try to loose your RAM settings. First, all settings auto seem to be good, but it's actually not the case. You have to set TRC and TRFC as higher than 12 and 14. I am seeting those to be 14, 18, and it seems to be working great. It will be better to set the burst length as 4 beats. I don't like this board coz I can't set the drive length to be weak instead of normal detected by the Windows. My system can post, but I got problems of playing 3D demos and games, which looks like it's the problem of motherboard. Not mature enough.
My rig:
AMD Athlon64 3700+ @ 2.7GHz
OCZ Platinum Elite DDR600 2.5-4-4-10 Dual Channel
Leadtek PX6800GT @ 425/1200 at 2nd PCIe slot
2 x WD 120GB 7200RPM + Samsung 160GB HD

K8n diamond plus power connector confusion

hi!
I have bought a k8n diamond plus motherboard. on the mother board there is an additional 4pin molex power connector JPWR3 that is meant to power up the graphics card. My graphics card (sapphire radeon x850xt platinum edition) already has its own 6pin pcie power connector.
Should i connect both the JPWR3 and the 6pin pcie graphic card power connector to ensure system stability since my PSU has all the required connectors (silverstone st60f 600W) or just either one of the connectors? ???
thanks

i was wondering the same. think right direction is both to be connected. from where will draw power dosnt importnant from mobo or from vga conector. maybe if VGA has own power connector that will be drawn 1st, or maybe in reversed way, or maybe both. or maybe connection from mobo is only used when need or when is using SLI. doenst matter inportant is to be VGA(s) to be porewed up enought. think both should be connected is the right way to operate normal. but i agree there should be little light about that in manual to eplained, maybe MSI will release next revsion of manual which will be there.

K8N Diamond Plus Power Supply Issue?????

I just recently got my pc functional. I am getting an error from the nvidia software about the power supply. I am running a 600W supply. This machine has 2 western digital 250g hard drives, 1 western digital 500g hard drive, 2 nvidia 7900 gtx w/512mb single gpu graphics cards, 1 floppy drive, 1 dvd-cdrw burner, 1 13-n-1 media reader, case has 2 - 120mm fans, 1 cpu fan, 1 nb fan, built in sound blaster audigy, about 8 usb 2.0 ports, a couple of firewire ports. The mobo is the K8N Diamond Plus MSI board. The nvidia software keeps telling me that the video cards aren't getting enough juice. With 600w is this possible? The power supply is made by Ultra. Any insite would be appreciated.
Thanks,
Bill

Did you connect the pci-express connectors from your power supply to the connectors on the video cards? If your power supply is indeed not sufficient then take a look at this one. It will easily handle your system..
http://www.neoseeker.com/Articles/Hardware/Reviews/OCZ_GXS_700W_PSU/

K8N Diamond Plus audio out problem

Hi,
I'm having an issue with the audio out on my K8N Diamond Plus. The rear audio out works fine when left jumpered. However when I connect the front panel audio connector to the mother board the volume of the rear audio out drops to an almost in audable level while the front panel audio works as expected.
At first I thought the rear audio had been completely disabled until I tried turning my speakers all the way up.
Is there a software issue here?
FYI I'm trying to use the front pannel audio connection on a Silverstone TJ07 case.

hey - mikein_texas here - i have same board but with a Centurion case -
couple of things i ran into - maybe will spark some ideas
initally i hooked up front panel audio and got nothing
then i read on page 2-19 of manual that 5-6,9-20 have to be jumpered for rear audio to work
but that means no front audio which was a drag - but solved that prob with usb mike and headphones
apparently unless i am reading it wrong and someone please correct me if so, but you can have front audio OR rear audio
BUT not both
again look at page 2-19 in manual and specifically at text in grey box in middle of page
Yukon PXE 2.01 ( 20040406 )
Pre-boot Execution Environment PXE v.2.1
DLink Cable Modem - model DCM-202
ViewSonic VX2025WM 20.1" Widescreen TFT LCD - 1680x1050, 800:1, 8ms
MSI K8N Diamond Plus Socket 939 NVIDIA nForce4 SLI X16 ATX AMD
SAMSUNG Black 1.44MB 3.5" Internal Floppy Drive Model SFD321B/LBL1
SONY Black IDE DVD-ROM Drive Model DDU1615/B2s
XFX Geforce 7600GT PV-T73G-UDD3 Video Card
SAMSUNG 16X DVD±R DVD Burner - 5X DVD-RAM Write and LightScribe Black ATA/ATAPI Model SH-S162L/BEBN
COOLER MASTER Centurion 532 RC-532-SKN1 Black Computer Case
AMD Opteron 165 Denmark 1000MHz HT 2 x 1MB L2 Cache Socket 939 Dual Core
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM Unbuffered DDR 400
Seagate Barracuda 7200.9 ST3808110AS 80GB 7200 RPM 8MB Cache SATA 3.0Gb/s Hard Drive
Ultra ULT31849 X-Finity 600W Power Supply
Cooler Master A12025-12CB-5BN-L1- 120 x 120 x 25mm 1200rpm, 43cfm, 22dBA, LED, 3-pin - front intake case fan
Scythe S-FLEX SFF21F 1,600rpm, 49.0CFM, 20.1dBA, 3-pin, 120mm S-FDB Bearing - rear exhaust case fan

ATTN K8N Diamond Plus Users - SLI problem

i need help diagnosing a problem:
i installed this board last night, transplanted my a64 4000+ along with 2 7800gt's and a brand new antec 550w psu. i did the live update bios flash (dont recall what version i am running now) got my e/n and audio drivers in place etc.
when i enable sli, the machine freezes when i fire up a game. both cards are plugged in properly, i tried swapping the slots they were sitting in, i tested both cards individually and they are good, i reversed the sli bridge just in case, reverted to fail safes in the bios,
i cannot play games in sli mode, in single card mode i can (I THINK... i am afraid this might be a heat issue, but i put plenty of fresh arctic silver on my proc, FEAR seems to freeze regardless if i am running sli or not..i will have to double check when i get home from work)
has anyone experienced anything similar? i am running fresh drivers and this is my first sli build so maybe i am missing something... i have been racking my brain for the last 12 hours, i dont think its the ram, could it be the northbridge chipset driver? i installed the one off the disc, but i didnt check the site for a newer one...
thank you so much for your time.

Quote from: kakarocht on 08-February-06, 13:58:02
Do not used liveupdate to flash the bios. Used from the program files itself. Refer from my sig on the flashing the bios. BTW create your own sig and gives more details about your peripherals and psu in details. What my concern is your PSU problems. Could you gives more details your PSU? Have you tried to install new drivers from NVIDIA??
the psu is a brand new antec 'true power 2.0' unit that i bought from newegg...in bios the 12v rail is showing 12.3 which might be a little bit high...but it is stable for what its worth...
here is my setup, i will create a sig shortly:
2gb PQI ram DDR400 running at stock speeds, not sure of the latency but i am thinking cas2
A64 4000+ Clawhammer proc running at stock 2.4ghz speed, 1mb cache
MSI K8N diamond+
dual 120gb maxtors
sony dual layer 16x dvd
stock cpu fan.
shitloads of AS7
another curious fact:
since the upgrade FEAR doesnt want to work at all... DOOM and COD2 both work in single card mode...but FEAR will freeze on me mere seconds after the first map loads...
i dont know what the culprit is...but i bet im gonna kick myself when i find out...
im gonna go re flash my bios now...
thanks for the input, its always greatly appreciated.

K8N Diamond Plus and IEEE1394 problem

I connected the supplied IEEE1394 bracket to the correct connectors in the mainboard (as described in pg 2-20 in the manual).
the "squarish" port worked fine, but the "longer" type just won't work!
what happened? in the manual, it says one of the connector is optional. but in my board, there are 2 1394 connectors.
does it have anything to do with the problem?
thanks

In my Diamond Plus board there were two separate brackets that came with it.
One - for IEEE 1394 (Firewire) usage has two different shaped connectors on it, two cables coming off of it, and each cable has a GREEN connector with a big nub hanging off the side that only allowed them to be plugged into the IEEE1394 ports on the motherboard. You could NOT accidentally plug those into USB ports because they would not fit.
The other, for USB and diagnostic LED, has two same sized USB connectors on it, and four LED's. The USB ports have two cables that come together at a YELLOW connector. The LED's have a single cable that comes together at a BLACK connector. It looks to me like if you inverted these connectors you could get it to fit into the IEEE jack on the motherboard, but they don't belong there.
Make sure you're using the right brackets.
Good Luck,
DJG
NOTE - Now that I reread this, it sounds like you might be saying that you got the two connectors to fit into the motherboard fine, but that one of the ports on the bracket still doesn't work. Is that what you mean? If so, I have nothing to offer except try switching connectors on motherboard and see if problem travels with bracket connector or motherboard port, try new bracket, etc...).
DJG

K8N Diamond Plus Power Problems...

Hi all, having problems again When booting to OS , the monitor shuts down.. still after a few seconds the os boots
It sounds like the system "almost" isnt getting enough juice.. Could it be ?? The fortron epsilon (fx700-gln) psu has only 15A 12v rails,
and i think those should be like at least 18Amps am i right ? So maybe all the problems are caused by my crap PSU !?
Or could it be just that the 4pin molex (pci-e extra voltage) and my x-fi fatalitys (4pin mini) are connected on the same 12v rail ?
Its hard to connect all the devices, because the psu has only 2 mini connectors (4pin) and my system reguires 4 of those
So the same 12v rail that powers the 7900gtx cards (4pin mobo) powers allso my x-fi fatality , DVD-RAM
Would the "TAGAN" 1,1KW PSU do the trick !? Noticed that it has 20A 12 rails

Ok.. But still wondering.. theres so many little annoying problems that.. USB devices leave lights on when shutdown.. when booting to OS the monitor shuts down (no signal) for a while and then starts up..?.. it can of curse be the SLi configuration (startup).. and the reset/restart problem still occurs..
Just wondering my "BIOS" settings.. How these should be --> Pci-e (pcie1-pcie2-pci/pcie2-pcie1-pci) or something like that..<---
The second is PCI Latency (32/64/96/128.....)
The A643700+ is OC,d the same way that with my previous mobo (lanpartyUT nf4 sli-dr expert) , 250x11x4xdram/fsb:1/1x1.300.2vx2,80v
So its 1.5v & 2,75ghz (PRIMED) , ram timings are the same , ram in slots 1 & 2 (green & purple) , 24pin main power+8pin extra power+4pin molex.. , both pci-e cards have 6pin power , sli-bridge installed properly , newest nf4 x16 drivers , newest BIOS , newest display driver....
But still when not OC,d , the system works OK i cant understand :-X

New K8N diamond plus questions please help.

Hi all well i am new to this msi site and am thinking of buying the new MSI K8N Diamond plus motherboard, the problem i have is that i have been a fan of ASUS and have had there last 3 SLI motherboards of which i have not been happy with.
Well i am totaly into overclocking and have an Opteron 165, balistix ram, 600w Enermax PSU, 2x Gainward 6800gt's,
what i am looking for is a motherboard that does what i says it will do, yes the asus a8n32 was a great motherboard but has a limitation on the voltage if useing the new E4-E6 stepping cores of which would only give a max voltage of 1.58v of which the asus spec said 1.76v.
What i am asking you chaps is is this a great motherboard, can you play with all the coms settings without any limitation, or do you think that the DFI motherboard is better.
If you can let me have some info on this motherboard that would be great, as i can not seam to get any reply from MSI about some information.
what i am looking for is what is the max CPU voltage and is there any limitation on it for some chips.
what is the max voltage for the ram
what is the max voltage for the chipset.
any help on this would be great.

Quote from: Stick on 23-February-06, 17:46:08
there is no mobo that alows 4V for the memory. i think the DFI goes up to 3.4V and you can use a DDR Booster to get to 3.8V. the only mobo that is capable to pass 3.3V is the DFI since you can have the choice to select from which rail the memory will be powered (the 3.3V or the 5V). you don't have that option in any other mobo.
Hi thanks for the mail but i have just copied this from msi about this motherboard, see below.
1.Adjust CPU FSB Frequency:
You can adjust the desired "CPU FSB Frequency" by using "+,-" key. The default value of AMD Athlon™64 is 200MHz. The maximum value is 450MHz.
2.AMD Overclocking Configuration (CPU Ratio):
If the CPU is Athlon™64 FX series, the ratio range is from 4 to 25.
If the CPU is Athlon™64 series, the ratio should be set according to its model number. For example, the ratio range of 3000+ is from 4 to 9, and the 3200+ is from 4 to 10.
3.Adjust Extra CPU Voltage:
This is for adjusting CPU voltage while overclocking. Following the CPU default value, the maximum is 1.8V. The interval is 0.05V.
4.Adjust DDR Memory frequency:
The Memclock is the major part which has four different frequencies to match many kinds overclocking memory modules. The memory frequency settings includes DRAM/FSB=1/2, 2/3, 5/6, 1/1.
5.DDR Memory Voltage:
This is for adjusting memory voltage while overclocking. K8N Diamond Plus has a special design.We use jump to distinguish two level arrangement of voltage. In this way it can get maximum 4.1V for overclocking modules. As you can see the below pictures, the left one is the standard mode when jump hat is located at the top postion. The default value is 2.5V, and the maximum is 3.2V. The interval is 0.05V. As the right one, it is overclocking mode when jump hat is located at the under postion. The default value is 3.2V, and the maximum is 4.1V. The interval is 0.05V.
What i am asking is there any limitation on the cpu voltage like the asus a8n32 as this had a max voltage of 1.58v due to it having a limit put on it by recomendation of amd.

2 'problems' with the K8N Diamond Plus

Hi there.
I just bought a K8N Diamond Plus and I'm having some troubles installing my system in conjunction to my Decklink Extreme PCI-E ( http://www.decklink.com/products/sd/ ).
Here's my configuration:
MSI K8N Diamond Plus
AMD64 X2 4400+
ROSEWILL 6600GT PCI-E VGA
Decklink Extreme PCI-E
2GB RAM ( 2 x 1gb) Kingston
OCZ-520 12U Modstream Power Supply
plus 6 HD's (7200rpm) and 1 DVD-+RW
The problem is, when I try to initialize the system with the Decklink, which it's a PCI-E 1x, it just don't boot. Neither putting the Decklink on the 1x, nor in the 4x slot and nor in the 16x.
The Decklink is working just fine in another system and doesn't seem to be a problem with this card.
I wondered if there's any limitation in the K8N Diamond Plus with working with the ROSEWILL 6600GT PCI-E VGA plus the Decklink.
=======================
The other thig is that when I take off the Decklink, the system boots normaly but a message appears while booting: "Not enough space to copy PCI option ROM 00:13:00".
And I don't have a clue about what's going on.
=======================
Please enlighten me with this questions if possible.
Thank you very much.
Greets.
Igor Bineli

Remove the battery away for 10 minutes, clear CMOS, start the system to load setup/optimized defauts in bios setup. After that, disable all onboard items in bios setup that you won't to use. Save and exit.
Plug ROSEWILL 6600GT PCI-E VGA card, and start your system to check if there is the error message. If there is, borrow another brand VGA card to do a test.
Besides, update your MB bios and driver version to the latest one.

K8N Diamond Plus BIOS problems

Hi , just replaced my lanpartyUT sli-dr expert with K8N Diamond Plus mobo and having problems allready :D
Just finished overclocking and now running at (250 x 11 x 800mhz x 1.300v+0.2v x dram/fsb 1/1 x 2.80v)
Memory timings --> (3,7,14,3,2,8,2,2,1,3,200mhz(15.6us),1,16x,7x,7ns,5ns,0clk,DiCC:enabled,1T,8beats,reduce 00%... ...)
The problem is "BOOT" related... System is PRIME95 stable , but still when trying to "restart windows" or "reset" the system wont BOOT !!?
When i shutdown and then power up, the system boots perfectly !? What can cause this kind of behaviour :/
I have OC:d quite many systems , but this is new even to me

The windows core program shows htt link 1000mhz exact. Memory settings are all "manually" adjusted. Cpu vcore is 1.300 & extra voltage 0.2v=1.5v.
All ECC options are disabled.Hdd:s adjusted manually. Should i rise the (NB) voltage , or does that have anything to do with this !? Maybe not at 250fsb only :D Cool & quiet is disabled naturally :/ All fan controls disabled , connected directly to psu. No D.O.T,s or anything automatic overclocking enabled. The (L cache & data cache scrubs) are strange to me, so those are disabled.After flashed bios , enabled boot sector protection. All the mobo power connectors are in use (24pin+8pin+4pin) Could it be that the memory modules should be used on ports 3 & 4 (now on 1 & 2) ??
The mushkin redline xp4000 memory specs Fortron Epsilon 700W Psu specs
Output Voltage Min. load Max. load      Load Reg.     Ripple & Noise
Frequency:   500MHz +5V     0.5A     30.0A     +-5%     50mV P-P
Latency:   3-3-2-8 +12V1   0.0A     18.0A     +-5%     120mV P-P
Parity:   Unbuffered +12V2   0.0A     18.0A     +-5%     120mV P-P
Voltage:   2.6V-2.9V +12V3   0.9A     18.0A     +-5%     120mV P-P
Module:   128MX64 +12V4   0.1A     18.0A     +-5%     120mV P-P
Chip:   64MX8 +3.3V   0.8A     36.0A     +-5%     50mV P-P
Pins:   184 -12V     0.0A     0.8A     +-10%     120mV P-P
+5Vsb   0.0A     3.0A     +-5%     50mV P-P

K8N Diamond Plus boot problems

I just built a new computer and it was working fine for about a month. Then one morning when I started it up it wouldn't turn on. The front LED's turn on, and the fans all start, but nothing ever shows up on the screen. The set of four lights on the back show R R
G G
Nothing has changed since the pc was working fine. I haven't changed any bios settings or added any hardware or software. I did try resetting the bios using the CMOS jumper, but this didn't change anything. The lights on the back show that it is initializing ide drivers, but in the manual it also shows that it is one of the last steps in the start-up process, so i would think that the memory check, processor count, msi logo ect. should appear on the screen like it normally does. However, the LED that blinks when the hard drive is active never lights up, but when i open the case and feel the hard drive i can feel it vibrating like it is functioning properly. And if it is a hardrive failure, then shouldn't the bios still start up and show up on the monitor? I have heard that many weird problems can be attributed to the psu, but I have a 500w Antec Smartpower 2.0, which is a pretty reliable psu from what i've heard. Any help or suggestions would be welcome. Also, how would i test individual components to find out what is causing the problem? I think since everything is within a couple of months old i should be able to get replacements. Thanks in advance for any help.
System Spec:
MSI K8N Diamond Plus
AMD Athlon X2 3800+
Nvidia 7600 GT
Maxtor DiamondMax 300gb ultra16
2gb Corsair Twinx xms ddr400
500w Antec Smartpower 2.0
Thanks!!

Quote from: Mikeyp926 on 15-August-06, 12:58:47
You guys are awesome! Thanks a bunch for the info on ram, I feel like I understand it better and I looked and found all the stuff in the bios that you guys were talking about. I'm downloading speedfan currently and will go install it on my other computer. I tried swapping the sticks of memory, but i ran into the same problem i did before. So i'm assuming that i can safely say one stick is faulty right? And do any of you guys have any experience trying to get replacement memory from crucial? I'll have to go poke around their website also. Well, thank you all so much for all of your help. This is my first home built pc and i'm trying to learn alot about them. Once everything is running properly i may try a little overclocking, but i'd like to get everything running smoothly first. Just out of curiosity, what would make a stick of ram go bad like that? It was only a month old, and i thought crucial xms was pretty good ram. Is it not? or did i just get unlucky?
Thanks a ton for all the answers, this forum is the most helpful one i've ever seen. thanks!
Maybe that you're unlucky to get those faulty RAM. Crucial RAM is not bad if you get the better performance if you're ocing your PC if or else get the value RAM if you don't oced.
Quote from: Svenomous on 15-August-06, 12:55:00
Speedfan 4.29 works with the K8N Diamond Plus. I have it running now
Ok. Get it but not sure about MBM as it seems that it don't support it. :p

K8N Diamond Plus Video problems

When ever I run a Game or any 3D program like 3DMark the video locks up I removed 1 of the card to test for SLI problems and get the same result pixilated FPS drop to 1 from 50-60 FPS and the system reboots after about 2m
Only think I have not done is update the Video cards Bios I have a friend that is having the same problem only thing that is different is he has running Win XP SP2 and has the n516 model video card and he did the bios update and after he did the Bios on the video card the system does not lock any more but the video get pixilated even just sitting at the desktop and he all other drivers are up to date
Mainboard K8N Diamond Plus V1.0
CPU AMD Athlon 64 X2 4400+ Toledo
2 CORSAIR 1GB DDR 400
2 eVGA 256-P2-N517-AX Geforce 7800GT 256MB
Antec NeoHE 500 ATX12V 500W
Antec LifeStyle SONATA II
Microsoft Windows XP Professional X64

Quote from: jzastrow on 19-February-06, 23:34:02
When ever I run a Game or any 3D program like 3DMark the video locks up I removed 1 of the card to test for SLI problems and get the same result pixilated FPS drop to 1 from 50-60 FPS and the system reboots after about 2m
Only think I have not done is update the Video cards Bios I have a friend that is having the same problem only thing that is different is he has running Win XP SP2 and has the n516 model video card and he did the bios update and after he did the Bios on the video card the system does not lock any more but the video get pixilated even just sitting at the desktop and he all other drivers are up to date
Mainboard K8N Diamond Plus V1.0
CPU AMD Athlon 64 X2 4400+ Toledo
2 CORSAIR 1GB DDR 400
2 eVGA 256-P2-N517-AX Geforce 7800GT 256MB
Antec NeoHE 500 ATX12V 500W
Antec LifeStyle SONATA II
Microsoft Windows XP Professional X64
I have a similar system
as you can see. you need 550 minimum to run it.
also what video drivers are you using?
what was the order of your xp install?
where is your page file?
what config are you hdd's in?
when was the last time you ran dxdiag? (post log here)
when was the last time you defragged? adaware spyware removal?

K8N Diamond Plus Audio Problem

New rig - have the K8N Diamond Plus, AMD 64 X2 4400+, Logictechz5300-e speakers. When testing audio - the front speaker channel does not work - the center and rear are fine - tested to make sure it wasn't the speakers - definitely a mobo problem. Have tried it set to 5.1, 6 and 8 channels. Has anyone else experienced this issue??
Thx

The audio signal from DVD or CD is passingthrough IDE CABLE digital..(When listen CD audio).Now with X-FI you must buy(of corse if you have the money) 7.1 audio speakers like mine(gigaworks s750) to take full advance of your card.Believe me you won't regret it!.
http://images.europe.creative.com/iss/images/artwork/a6_rgb/GigaWorks_S750_c.jpg
http://images.europe.creative.com/iss/images/artwork/a6_rgb/DDTS_100_c.jpg

Help please Problem Raid K8N Diamond Plus

I have a PC with mather board K8N Diamond Plus 2HD maxtor 80gb (6V080E0) sata II. You can help me I am becoming crazy I must mistake in the bios or in the raid, I just do not succeed to install windows on 2 HD Sata II are compatibility problems?
Thank

Welcome!!
Firstly, may I suggest you give as much system information as possible, this will help us to assist!!
Second, I recently set up my RAID 0 and had an XP installation problem, but I believe mine was caused by my motherboard not liking the new 1.2BIOS.
As soon as I went back to the default (1.0) BIOS, no probs!

K8N Diamond Plus Power on problem

Similar Messages

Maybe you are looking for