K8N (MS7220&MS7125) ISO with bios files for flashing from cdrom

============================================================================================
MS7220
============================================================================================
I made a bootable cdrom ISO with different bios files for easy flashing of Diamond Plus
without the need of a floppy drive.
Nothing modded , just collection of MS-7220 Diamond Plus bioses on one bootable cd for conveniance.
Burn ISO (unzip first) and reboot PC with CDROM as 1'st boot device.
A menu tells what to key:
1,2,3,4,5,6 or 7 followed by enter.
Menu looks like this :
+--------------------------------------+
Press 1,2,3,4,5,6,7 followed by enter
to flash with desired version
+--------------------------------------+
1 = MS-7220 bios 1.0
2 = MS-7220 bios 1.1
3 = MS-7220 bios 1.2
4 = MS-7220 bios 1.22
5 = MS-7220 bios 1.33
6 = MS-7220 bios 3.09
7 = MS-7220 bios 3.0A
R:\>
Pressing 1 will flash with following command
afud408 a7220nms.100 /P /B /N /C
Pressing 2 will flash with following command
afud408 a7220nms.110 /P /B /N /C
Pressing 3 will flash with following command
afud408 a7220nms.120 /P /B /N /C
Pressing 4 will flash with following command
afud408 a7220nms.122 /P /B /N /C
Pressing 5 will flash with following command
afud408 a7220nms.133 /P /B /N /C
Pressing 6 will flash with following command
AFDOS404 A7220NMS.309 /B /C /P /N
Pressing 7 will flash with following command
AFDOS404 A7220NMS.30A /B /C /P /N
Link:
http://members.lycos.co.uk/olsen0423/MS7220
File : 7220_batch_14-45-Okt-07-2006.zip
============================================================================================
MS7125
============================================================================================
To whom it may Concern.
I made a cdom ISO for MS-7125 board also.
Menu looks like this:
1 = MS-7125 bios NCG 1.C (W7125NCG.1C0)
2 = MS-7125 bios 1.D murdok mod (7125XMOD.1D)
3 = MS-7125 bios 1.D Syar mod temp disabled (W7125NMM.1D0)
4 = MS-7125 bios 1.D MSI regular (W7125NMS.1D0)
5 = MS-7125 bios 1.C MSI regular (W7125NMS.1C0)
ISO (bootable) is at :
http://members.lycos.co.uk/olsen0423/MS7125/
D/L file: 7125_batch_22-10-Okt-15-2006.zip , unzip and burn .
Note!
Make sure that you clear cmos after bios flash (with PSU disconnected) .
After powering up , first to do is enter cmos and "Load Optimized Defaults" and setting date/time , then save/exit .
Next boot to cmos you may define/change to own preferences.
============================================================================================

Quote from: paulg on 08-October-06, 05:16:44
You're a legend syar2003! I thought I'd try v3.0a since v little is known about it and thanks to your efforts it's easy for me to revert back.
Just an initial observation on the 3.0a version - I've managed to get my 3700+ SD (E6 stepping) overclocked well beyond what I mangaged with bios v1.0. I'm now running at 2.9GHZ compared to the maximum 2.7GHZ previously - and i'm running the memory at 1:1 with the timings at stock! Seems stable enough in a windows environment (been running about 4 hours). Temps are around the 38 degree mark. I will run some Prime95 and a few 3d games over the next few days.
Thats very good , seems 3X bioses is better for overclocking afterall
Nice to be appreciated ,thanks for those kind words !
I don't have the Diamond + board myself so I can't really say if this or that bios is good or not and which versions is better or worse .
Syar

Similar Messages

MOVED: K8N (MS7220&MS7125) ISO with bios files for flashing from cdrom

This topic has been moved to User modified BIOS.
since along with regular BIOSes, its discussed and provided beta and modded BIOSes
https://forum-en.msi.com/index.php?topic=101664.0

Quote from: paulg on 08-October-06, 05:16:44
You're a legend syar2003! I thought I'd try v3.0a since v little is known about it and thanks to your efforts it's easy for me to revert back.
Just an initial observation on the 3.0a version - I've managed to get my 3700+ SD (E6 stepping) overclocked well beyond what I mangaged with bios v1.0. I'm now running at 2.9GHZ compared to the maximum 2.7GHZ previously - and i'm running the memory at 1:1 with the timings at stock! Seems stable enough in a windows environment (been running about 4 hours). Temps are around the 38 degree mark. I will run some Prime95 and a few 3d games over the next few days.
Thats very good , seems 3X bioses is better for overclocking afterall
Nice to be appreciated ,thanks for those kind words !
I don't have the Diamond + board myself so I can't really say if this or that bios is good or not and which versions is better or worse .
Syar

Trouble with extracting file for Flash Professional cs5.5 because of error occurring??

Im having trouble extracting the file as it has fully downloaded but then it comes up with a warning box which says The following disk images could not be opened and then an image and reason with this below it FlashPro_11_5_LS1.dm error -4960 not to sure what to do about this??

Which operating system are you using? If you look in the Adobe Download Assistant is it still downloading the install files?

Need Help! Bios file for Compaq SR2010NX

Hello all, I'm looking for the original bios file for the SR2010NX. HP doesn't have it on their website and my computer won't boot correctly with it. ahhhhhh. I appreciate any help!!!
Thanks John

According to what I found, that has this motherboard:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00757470&lc=en&dlc=en&cc=us&os=2093&product=323...
Which is a A8M2N-LA Naos-GL6, is this that what you have? And what BIOS are you looking for, or should I say what did you try to put on it?
I happen to have the same motherboard on an old Compaq, so I could possibly exctact the BIOS file if it is the one you are looking for. It showes 3.00 I beleive but I will check if you need the info.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.

I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait.

FileNotFoundException thrown when opening a file for writing from EJB

Hi,
I know it is against EJB rules that access file IO from EJB. However we have a legacy system to working with and we need to generate a text file on file system.
Weblogic (we are using 10.3) allows open a file for read from EJB. When we tried to open a writer like below:
BufferedWriter writer = new BufferedWriter( new FileWriter(fileName, false));
FileNotFoundException was thrown from the native method of open. The fileName is an absolute path and permission is properly set. The same piece of code can execute correctly in a test application with same filename.
Does anyone know how to achieve this or whether Weblogic just forbids this kind of output access?

Sorry guys. Just double-checked the source code and found out a bug produced wrong filename, the filename was surrounded by "", so FileNotFoundException is a correct result.
Weblogic does allow read/write external file.

Saving a swf-file for flash player older than 10.3 in Flash CC

Hi,
I am working with Flash CC and need to save my swf-files for Flash Player older than 10.3.
Is there any chance to do so?
Besides working with CS6 again ;-)
Thanks for every help!

In the meantime I found a very good answer myself.
For anyone who might need it, too:
Re: Can Flash Pro CC publish to flash player 9??

Need BIOS file (M-Flash) MS7597 (v1.2) GF615M-P33

Need BIOS file (M-Flash) MS7597 (v1.2) GF615M-P33
Thank you

Quote from: spinalgr1998 on 28-March-15, 17:17:41
mainboard S/N is MS-7597 VER 1.1
That's not the S/N. You can find the S/N on a white sticker on the box or on the back of the board:
Example:
(board)
(box)
Quote from: spinalgr1998 on 28-March-15, 17:17:41
I can't find BIOS ID.
Follow Svet's advice:
Quote from: Svet on 24-March-15, 22:31:04
list full BIOS ID look for it in BIOS Setup [or during bios post screen press "pause" key]

[svn:fx-3.x] 13067: Fix for html-wrapper ant task generates incorrect wrapper files for flash player version detection .

Revision: 13067
Revision: 13067
Author:   [email protected]
Date:     2009-12-17 12:48:20 -0800 (Thu, 17 Dec 2009)
Log Message:
Fix for html-wrapper ant task generates incorrect wrapper files for flash player version detection.
QE notes: None.
Doc notes: None
Bugs: SDK-18826
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-18826
Modified Paths:
    flex/sdk/branches/3.x/modules/antTasks/src/flex/ant/HtmlWrapperTask.java

Could you try creating a new Firefox profile to see if that helps?
8. Make a new profile
Chris

When logging on to Hotmail, a window opens asking me "What to do with this file" for "default.aspx"

This morning, I am unable to log in to Hotmail. The homepage appears normally, but after I enter my email address and password and click to submit them, a window pops us asking me what to do with the file "default.aspx." I have a Vista machine, and last night my computer automatically installed a ton of Microsoft updates. In fact, the update list shows that one of the updates failed to install. At the end of this message, I have pasted the details of the failed update. I have checked the Hotmail support forum, and someone else posted that the have experienced the same problem this morning. The Microsoft "expert" asked him or her to contact Mozilla for support for this issue. Thanks in advance for whatever help you can provide, although I highly suspect that this is a problem on the Microsoft/Hotmail end, not yours.
Here is the info on the failed software update from last night...
Security Update for .NET Framework 3.5 SP1, Windows Vista SP2, and Windows Server 2008 SP2 x86 (KB2478660)
Installation date: ‎6/‎16/‎2011 12:01 AM
Installation status: Failed
Error details: Code 80242006
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211422
Help and Support:
http://support.microsoft.com

Hotmail is rolling out a server change at their end which might be causing this problem. Mozilla has spoken to them about it and they are trying to fix it. I won't be able to provide you a time estimate by when it will be solved but hotmail/mozilla is certainly looking at this issue.
I will let you know if get any updates!

Need help with batch file for javac.exe and java.exe

I have this in my batch file:
c:\jdk1.3.1_05\bin\javac
What symbol do I need to be able to run this from cprompt with any file following it

Thanks could remember that for nothing

Problem with video file for iMovie 4

I'm not completely sure if this is the right forum for my question, but...
I sent out some old family videos to be converted into movie files (.mov files). The problem is that they came back with each file at approximately an hour long. I want to be able to edit them (add chapters, add background music, etc.) and make copies for each family member on my computer. I tried importing the video files into iMovie, but it said that they were too large and that I could import them after buying QuickTime Pro and chopping them up into smaller portions through that.
I had two questions. First, would I be able to do this with QuickTime Pro and then use iMovie or iDVD to create the DVDs without any (or too many) problems? I'd rather not spend the money to buy QuickTime Pro and then find out it was a waste because it didn't work. And second, is there some other program (preferably free) that I could use to cut these videos up into smaller portions?
Please help! Thanks!

Yes, QT Pro can do it for you.
http://www.danslagle.com/mac/iMovie/tips_tricks/6003.shtml
You can also buy iLife '05 or '06 as none of these version has the length limitation.

Audition 5.5 - Help with .wav files for phone system - making a hold message PC & Mcc

Hello everyone,
I am really frustrated trying to create a .wav file for our phone system and I was hoping someone might have some suggestions as I am new to using Adobe Audition. Our phone system will only accept .wav files for our hold messages but the tricky part is that is can only be a maxiimum streaming bit rate of 64 kbps. Everything we've created under 256 kbps becomes in-audible and I'm really not sure what to do as the current messages sound fantastic. Our current hold message is 35 seconds long and we have another one we are about to do which will be 2 minutes long (uuuugh).
- I've tried first converting the .wav file to an .mp3, lowering the bit rate to 64 kbps, then converting back to .wav but the bit rate goes up to almost 1500 kbps after re-converting.
- I've tried making the track mono, reducing the sample rate to 22k but the size ends up being somewhere between 512 and 768. If I lower the sample rate much further and convert to 8bit, the audio sounds terrible.
- I've also tried using Adobe Media Encoder, Audacity, Hand Brake, OS X Automator and a few other programs all with the same results.
- I've tried re-recording the audio on a handheld .mp3 recorder hoping the initial quality would be less (originally recorded on a PC through Audition with a external mic).
Unfortuantely, the person who used to do these conversions is no longer with the company, never documented the process and all I know is that they used to do this on a Mac. Also, the software that uplaods the files is a Linux based which is out of my area of expertise so I'm not able to tinker with it to make any headway.
** Any sort of suggestion would be greatly aprpeciated as I really don't know much about audio. I've been working on this for 2 weeks now and this is really driving me crazy. **

9ov7 wrote:
Hello everyone,
I am really frustrated trying to create a .wav file for our phone system and I was hoping someone might have some suggestions as I am new to using Adobe Audition. Our phone system will only accept .wav files for our hold messages but the tricky part is that is can only be a maxiimum streaming bit rate of 64 kbps. Everything we've created under 256 kbps becomes in-audible and I'm really not sure what to do as the current messages sound fantastic. Our current hold message is 35 seconds long and we have another one we are about to do which will be 2 minutes long (uuuugh).
- I've tried first converting the .wav file to an .mp3, lowering the bit rate to 64 kbps, then converting back to .wav but the bit rate goes up to almost 1500 kbps after re-converting.
Eugh! Converting to MP3 is absolutely not the thing to do!
- I've tried making the track mono, reducing the sample rate to 22k but the size ends up being somewhere between 512 and 768. If I lower the sample rate much further and convert to 8bit, the audio sounds terrible.
- I've tried re-recording the audio on a handheld .mp3 recorder hoping the initial quality would be less (originally recorded on a PC through Audition with a external mic).
Okay, in reverse order: I know it sounds daft, but actually you want to start with the best recording you can possibly have. You are going to have to reduce its bit rate, but if you reduce a crap signal's bit rate, it inevitably ends up worse than reducing a good signal's one; when you think about that for a moment, it's going to make sense (I hope...).
As for what you need to do - well it's going to have to be a mono file anyway (you haven't got a stereo telephone system), and that will immediately halve the streaming rate, but the other thing you need to bear in mind is that telephones have a limitited bandwidth, and that your sample rate, even at 22k, is going to give you more bandwidth than the system has. If you can reduce it to 8k, it will work fine. This will still give you an upper frequency limit of 4kHz, and that's more than adequate for telephone speech, believe it or not...
The other thing, and this is where I think you may be running into trouble, is that 8 bit streaming is pretty much the norm here. All it does is to increase the noise floor, so that the signal to noise ratio is about 48dB instead of the 96dB it would be with a 16-bit signal. But, to get this to work to your advantage, you have to optimise the audio you are using in the first place. Chances are that you need to compress your recording so that it has a relatively limited dynamic range before reducing it to 8-bit, and then you'll be fine. This is better anyway for telephone systems - there's far less chance of bits of the message being missed because they're too quiet. Also, you don't want massive great peaks in the recording - these just reduce the maximum overall level for the majority of the message sound. So, you need to apply a limiter to get rid of them, leaving the majority of the speech sounding just as good, only louder. All of this you can easily do in Audition - don't need any other software at all.
So, my guess is that the previous maker of your messages knew exactly what he was doing. Yes, he could have documented the basic steps, but he couldn't have been absolutely specific about it because no two recordings are the same. I'll attempt to explain the basic steps in English, but how well you will be able to follow this, I'm not sure...
The basic process I'd go through with the recordings is firstly to normalize them to 0dB, then look at how far down most of the 'green' parts are - this is the bulk of the signal, and where all of the meaning is. Then, you apply a limiter to this so that those green parts don't have peaks sticking out of them. Then, if you need to, normalize again so that the green part moves to the upper part of the waveform space (towards where 0dB is). Then, if you need to, apply compression to the signal so that the level of it sounds about the same all through the message.
Now, when you reduce your signal to mono, 8k, and 8-bit, pretty much everything about the original signal will still be there. That should stream 8-bit words at 8k, making 64k streaming for a single mono channel. This will work fine, but only if you optimise the signal first - otherwise no chance!

Cannot download BIOS file for Portege Z930 - error 404

Hi,
My tempro tool says there is a new BIOS available for my Portege Z930.
But the link gives nothing.
Can someone fix this ? Or have the correct link
Thank you
Markus

+1 This is very frustrating. Tempro alerts are all very well but no use at all if Toshiba can't be bothered to maintain links!
Please fix asap, Toshiba.
Richard

I need bios file for msi fx5900xt-vtd128, please

please send me the bios file of these videocard
[email protected]

Hi, what happend? why do you need Bios file? try installing Live update. I think several members of the forum hav that card, Osnavi if Im wrong have it. You could try also this page:
http://www.mvktech.net/component/option,com_remository/Itemid,26/func,selectfolder/cat,81/page,4/

K8N (MS7220&MS7125) ISO with bios files for flashing from cdrom

Similar Messages

Maybe you are looking for