K8N Neo 2 Plat. NVRAID - problem installing Vista Beta 2, anyone can help???
now, since this board is supported by the nForce 3 ultra chipset and that nVidia has not yet develloped 64-bit Windows Vista Beta 2 drivers for NVRAID (64 bit of course), system drivers have been available.
the online upgrade checker program thing that is used by Microsoft to verify if vista beta 2 will install properly on this board says I might have trouble with SATA Raid support since it does not recognize the nForce 3 ultra NVRAID.
Does anyone have the slightest idea where these driver could be found or will MSI devellop them in time cause I have a copy that is waiting to be installed but it will simply not recognize my hard disk or will not see it at all.
my disks are 3 x WD Raptor 74GB in RAID 0
Quote from: exess on 27-July-06, 00:21:47
tried that already guys!!!!! these drivers support nForce4 and above.........................
I even tried nVidia support, and them to tell me to contact MSI since they haven'T develloped any.........................
this is lame..... I mean the board ain't that old.....
well, if nvidia support doesn't have any, than MSI won't have any. i don't know why you think it's lame if a manufacturer doesn't have drivers for an operating system that is not even released yet (beta doesn't mean it is final).
Similar Messages
-
K8N Neo Platinum2 FSR-more problems installing (HDD)
Well, guess who's back-back again...after all my travails getting the system to just BOOT now it won't read ANYTHING from floppy diskette or CD-Rom. I've tried a variety of solutions from Western Digitals Lifeguard 11.0 utilities disk, an old WIN 98 boot disk, and an ancient DOS 6.22 install disk-nothing will load to the HDD. I always get an I/O error or nothing happens at all. I have NEVER had such a rediculous run of luck as this over a half dozen new system installs. After last nights uphoriah over solving the power up problem I find myself in a state of disbelief. This is just too much. Brand new equipment all around only to get S#^! for a result. I am so disgusted right now. Of course,it will end up being something so simple that I have no clue about but for now I am simply disgusted. Open to any suggestions.
thanksWell, more frustration on my part it seems. I turned the FDD cable around-plugging the end with the twist into the drive itself (red line to the left) and unplugged the DVD drive, removed the jumper from the Burner thinking FOR SURE this was the answer..and nothing. Same thing. I put in the Western Digital partition diskette (brand new) into the FDD, power up, get into BIOS no prob, no errors, diskette starts "Caldera MS-DOS", loads XMS mem manager, creates virtual disk drive D: and everything stops..........light on the FDD stays on and nothing happens. I leave it sitting for 5, 10 minutes and nothing happens. This is exasperating. NEVER had this happen once I got to the point of formatting the drive for install. Really weird. It just hangs. What about that issue you kept mentioning with the case USB connections? Could that possibly cause such a glitch??? I'm using an Arctronix Guardian case-the one with the Cylon-esque blue light that roams back and forth. Pretty cool stuff.
Oh, and I tried booting from the Western Digital BOOTABLE cd-rom after changing boot priorities to cd-rom then HDD...still the same result. It goes to the point of installing the IDE CD-ROM device driver and freezes. Could I be so unbelievably unlucky as to have purchased a bad HDD from WD?????????????????At this point?????? -
Msi k8n neo 2 plat usb problems
ok just built this rig and having minor difficulties with usb ports. have my mouse pluged into usb port. at first everything was fine, but within seconds of starting windows my mouse will first lag out for a second or two then it will totally die. i plug the mouse into the usb ports in the rea of my computer. after the mouse totally dies i plug it into a diffrent usb port either front or back and the same thing will happen. it will work for five minutes then just totally die. all the drivers are installed ( almost positive, downloaded sp2 and latest drivers from msi site) and i dont know what to do. could it be the mouse or is it the board? please help cause if it is the board i need to rma it as soon as possible b4 my 30 day free shipping period is up, thanks for anyinput u can give me.
Do you have any other USB devices? Are they working OK?
Does your mouse work OK with any other computer?
Without anything else to go on its very difficult to diagnose, but as a guess I would say your mouse is faulty.
Chip -
Quick Question MSI K8N NEO 4 PLAT SLI
Hey guys,i am new to this forums just needed some help, i am about to purchase a:
AMD 64 3000 VENICE
LEDTEK 6600 GT PCI EXRESS GDDR3
CORSAIR VALUESELECT 1GB RAM DUAL CHANNEL
MSI K8N NEO 4 PLAT SLI
EPOWER 450 WATT PSU
i was wondering woud i need to update the bios 1st or will the stock bios that comes with the motherboard will work with the venice. I am getting all these parts from Zip Zoom Fly, accept the PSU. Thanks for your help.Quote from: Dream_true on 28-June-05, 08:14:40
Only BIOS 1.4 and above support Venice & San Diego. However BIOS 1.4 has shut-down issue with RAID. It is suggested that you let your reseller help you flash BIOS to the latest version 1.5. After flashing BIOS, Loading Optimized defaults is needed of course. Good Luck!
Support new features in that cpuid yes. But that is not the same as you are not able to boot/post your system
with an earlier bios .
I booted up a venice on a K8N Neo2 with an aged 1.3 bios (with no venice SD support) just fine .
If the bios supports 90nm cpu it will post .
New CPUID added means :
Shown on post (display)
And e.g new model spesific features (like e.g SSE3 ) enabled .
Use the CPUID instruction to properly identify the processor.
• Determine the processor type, stepping, and available features by using functions 0000_0001h
and 8000_0001h of the CPUID instruction.
• Boot-up display - The processor name should be displayed according to the processor name string
defined in CPUID Guide for the AMD Athlon™ 64 and AMD Opteron™ Processors, order#
25481.
Chapter 12 , Bios and Kernel developers quide for athlon 64 . 26094.PDF -
I have been having this problem since the 4th of this month. I tried to open iTunes and this error message came up: "iTunes was not installed correctly. Please reinstall iTunes error 7 windows error 126". There is nothing else that comes up but if anyone can help or know anything about it I will greatly appreciate it.
Have you tried google for this Error Message...
http://support.microsoft.com/kb/959077 -
Hello
THIS IS RAZA
I GOT A MACBOOK PRO
I HAVE A PROBLEM. PROBLEM IS how to solve this problem i have uploaded in .... all the time few days later on i face this problem in safari..... anyone can help me please.....thanksThis is a scam. Do not phone these people, at best they will charge you for unnecessary 'cleaning' and at worst they will gain access to your Mac and steal your data. You've probably managed to install some 'adware' which is producing this fake warning. 'Adwaremedic' should remove it and is safe to use - please see
http://www.adwaremedic.com/index.php -
I didn't update or download anything, then today I can't see any video website like youtube, vimeo, even facebook. My flash player is installed and it's work because I still can see the video in IE, only on Firefox it only audio work, the video is all blank(black),
when I restart my PC again the video can work just first video, then when I see another website video it all black...... (but sound still work)
anyone can help me?Try to disable the hardware acceleration in the Flash Player.
See:
* https://support.mozilla.org/kb/Cannot+view+full+screen+Flash+videos
* http://www.youtube.com/swf_test.html (right-click the player: Settings)
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Hi. Since I installed the Maverick I can't open anymore the Calendar App as also the App Store. Anyone can help me with that?
Thank you in advanceI have this same problem on my iMac since installing Mavericks. The emails download, I can see who they are from and when they came, but nothing shows up in the message pane. I can see emails I got before I installed Mavericks, although about half of them did disappear. Sure would like to find a fix--perhaps the 10.9.1 update will do it?
-
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks
Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?
-
I have been trying to update iTunes 11.1.3 (8) to 11.4 and the error message says "an unexpected error occured. iTunes cannot be installed". Anyone can help?
I have a Mac Book Pro with OS X 10.6.8If your profile is correct you are using 10.6.8 Snow Leopard. The latest iTunes version for that OS is 11.3.1 If your profile is wrong and you have 10.9.5 Mavericks, then the iTunes version is 11.4. You cannot use Mavericks versions on Snow Leopard.
-
My Time Machine says there is no backup disk available. I've never had any problems with my time machine completing backups. I was away from house with my laptop for about 9 days so I'm wondering if there is something I need to do now that I'm home to get it working again. I'm not technologically savvy, so if anyone can help, I'd appreciate it!
Thanks,
JanaYou can lose your ability to backup through TM for any number of reasons, but the most common is what happens after a update. If your drive still works, your best approach is to read this:
http://www.chriscolotti.us/technology/how-to-fix-osx-mountain-lion-time-machine/
The attached link contains helpful graphics, so don't worry if you're not tech savvy. -
Wonder if anyone can help? Have just bought a new Macbook pro and installed FCP7. I thought that I would get quicktime pro as standard but stuck with QTX. Downloaded QT7 but it won't let me install it. Says I can't do install as I already have QTX. Does FCP not come with QTpro or am I jsut being stupid. Any suggestions would be great. Thanks. B
Hi there,
Are you running Lion or Snow Leopard? either way this may help by the looks of it.
http://www.macworld.com/article/161320/2011/07/lion_quicktime7.html
cheers
Andy -
i am trying to install new os x in to my iMac but it says this disk is locked is anyone can help me to unlock the disk
Launch the Terminal app, copy & paste this command into the window that pops up, and hit the return key. At the Password: prompt, carefully enter your admin password, since nothing shows up on the screen, and hit the return key.
sudo chflags 0 /Volumes/
Then, copy & paste these next two, one at time, into the window and hit the return key after each:
sudo chmod a+rx /Volumes/*
killall Finder
Quit the Terminal app and try installing again. -
I can't Install the Mac OS X Lion because of Disk Locked. How to Unlock the Disk? Anyone can Help Please
Right click the hard drive icon and select Get Info. In the new pane, on the bottom, do this:
1. click the padlock, and authenticate with your password.
2. change Privilege to Read & Write - just click what is there and options will appear.
3. close the pane.
Maybe you are looking for
-
5 plus years ago my wife had the only Apple ID and as a family we all used her Itunes account to buy and listen to music. A couple years later, I (husband) bought my first iPhone - the only iDevice in the household. When I set that iphone up, I use
-
Hey. I have a computer with windows vista (ugh) and I was originally able to use iTunes. One day, though, I tried to install iLike, another program, and since then whenever I try to open iTunes it says "This application has requested the Runtime to r
-
My Mail emails no longer show up once I click to highlight.
I used to be able to click once on an email and then see the body of the email that fits in the window. That no longer works. Now I have to double click and open the entire email to get any view of it. Thought it might have been some format change
-
A Microsoft technical advisor said that the "retail copy" of Windows 7, 64 bit Home Premium would not work with Boot Camp to put the Windows operating system on the IMac. She said that I would have to use the System Builder copy of Windows 7 to put i
-
Transition to Show Form in XML FOrms??
Dear SDN, I have a requirement in which i have to display the news summary in RenderListForm and its Details in the Show Form but the Show Form Appears in a New POPup window, which is Counter to our requirement. How to get Show Form Cont