K8N Neo 2 Platinum - Any issues with with a ATI 1950pro 512MD AGP?

Hello, I have always bought NVIDIA based cards and I am thinking of moving to ATI. The 1950pro 512MB AGP card looks like it is going to be that last AGP card and I want to keep my rig a little longer before I go to PCI-e.
A few years ago I remember that I stayed away from ATI because the catalyst drivers were know to have some issues. Does anybody know of any issues that I might experience with my board and ATI? Of course, I will make sure that I wipe the NVIDA graphic drives from my system completely.
Thanks!

No known issues (as far as I know). Just the fastest agp card around. Drivers quite good, not more or less problems than with nvidia drivers. There will be also no problem because of nvidia chipset board and ati vga, very common combination. Nothing that should hold you back from getting it.
Although I'd choose 256mb version because 512mb won't cause any noticeable performance improvement compared to 256mb. Better buy Powercolor 1950Pro with silent accelero X2 installed: http://www.powercolor.com/global/main_product_series.asp?int=agp&chp=x1950

Similar Messages

MSI K8N NEO PLATINUM BlueScreen Issue! Help!

I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
MSI K8N NEO PLATINUM
ATHLON64 3000+ @2.01 (stock)
SAMSUNG 512MB PC3200 CAS 2.5
PNY MX440 64MB DDR AGP8X
MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
300W GENERIC PS
LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

which drivers are you using?
Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
this way it will stop at the blue screen and get an stop error number
Or view the error log
Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems ->under Tools -> my computer Information-> View Advanced System Information -> View error log
it shows all errors by date migh provide you error numbers ie. 0x000008e

MSI K8N Neo Platinum ,bios issue or HW

Hi i am using a system like in the signature described (usind adata instead of twinmos) im cooling with a prometeia system , and the board ist watercooled.
My CPU is a Newcastle (@2800mhz ) my graphic card is the normal 9700pro (it makes no diff in oc if the card is clocked or not)
Now i got some serious problems , i can´t run high fsb sync ? Why ? i wasn´t able to do this with the twinmos ram , but i read twinmos has some serious problems with the nforce3, so i purchased 2*512 mb adata.
I tried different dimm combinations (1/2 ; 1/3) that didn´t made any difference
I tried different bios (1.2 1.25 1.31 1.1) but this didnt made any difference either (using 131 now)
my pci/agp is fix (always 66,67/33,34 in clockgen so its just perfect)
i don´t use any SATA devices (all disabled in bios)
What is my Problem ? is it only a bios problem , or is there hardware in my sys which makes probs? Could it be an IRQ Problem (got 2 pci cards in slot 3 and4 its an IDE raid controller and a soundcard)
i hope there is any help for me :(

Well this is the second time someone mentions problem with Adata DIMMs:
https://forum-en.msi.com/index.php?threadid=55475&sid=
Maybe it's about time to post it here:
https://forum-en.msi.com/index.php?threadid=51997&sid=
For all I can think of right now, either run the board with a single module or both with 5:6 divider

K8N Neo Platinum keeps shutting down

I have just built a new system with a K8N Neo Platinum, Athlon 64 3400+ with retail heatsink and fan, 1GB of Corsair TWINX1024-3200C2 DDR400 memory, eVGA GeForce 6800 GT, two 80 GB Maxtor SATA drives in an Antec Sonata case with its TruePower380 watt PS, and my existing NEC 2500 DVD-RW and a DVD-ROM drive and floppy. The system keeps shutting down before I can get WindowsXP installed. It seems to be a heat issue, since its runs the longest after a lengthy shut down, but the bios hardware monitor shows the system temp stable at 33 and the CPU temp at 39.
If I let it idle, it continues to run, but it frequently shuts down when I put a load on it, such as saving the bios configuration or starting Windows during XP setup. I have been able to get XP installed once and started to install the Nforce drivers, but it shut down in the middle of this. Windows files seem to be corrupted frequently. It seems to be somewhat better after I pulled the Athlon heat sink and reapplied a thinner layer of Arctic Silver II. I note that the heatsink does not attach as tightly as the one on my Athlon 1800+. The heatsink fins always seem to be cool to the touch. I notice that the machine usually (but not always) shuts down on a keystroke. I am using a PS/2 keyboard since my USB keyboard doesn’t seem to work.
I understand this motherboard has some issues with temperature sensing, and I would like to get XP installed so I can flash to a later bios and try some moderate overclocking.
I am considering going to an aftermarket CPU cooler, installing a larger power supply, or replacing the MB. I am also considering switching the RAID configuration on the SATA drives from 0 (striping) to 1 (mirrored) or just turning off the RAID function until I get this fixed. Any help would be greatly appreciated.
Trickster2

Thanks for the suggestion. The Antec 380 has 18 amps on the 12 volt rail, 35 on the +5 and 28 on the +3.3, and I have seen numerous posts of people successfully using this PS for this MB. I have tried reducing the power demand by switching to an old PCI video card, an old stick of 256MB memory, unplugging the optical drives, floppy and case fans, but the machine still shuts down just as quickly.
I finally got XP installed, but haven't been able to update the BIOS yet.
Is there anyway to know whether it's the CPU, the PS or something else causing the shut down?

MSI K8N Neo Platinum - CPU Cooler?

Hi there, this is my first post to the forum and hope that someone can help
Bascially I've just purchased a MSI K8N Neo Platinum mobo to use with an AMD 64 2800.
I'm wondering if I should use the stock CPU cooler or look to purchasing a cooler such as a Zalman? I want to keep the computer as quiet as possible.
I've recently read that it would be better to use the Cool and Quiet option with the stock CPU cooler instead?

Chris,
If you don't mind a used one, there are probably about a hundred thousand available ones from people in these forums who has upgraded their heatsinks, and that's about everyone
The problem is, we dont want to give them up. We bought the retail package with fan not because of the free heatsink/fan, but because of the 3 year warranty that you only get with said combo. To invoke the warranty, we'd have to return everything, including the heatsink/fan, so we hang on to it and let it collect dust.
So, for an aftermarket fan. If you don't plan to overclock, ever, the thermaltake silent boost K8 will do, although it is nowhere NEAR the 21dB that tt claims. They are known for shall we say, exaggerated claims. But it's certainly quieter than the stock HSF, and it's available everywhere.
Note that the "silent boost k8" is different from the "silent boost". The latter is for socket 462 I think.

Any problem with Gainward 6800GT & K8N Neo Platinum? (sock754)

Hi all! I want to buy the k8n neo p., was reading this review:
http://www.hardwarezone.com/articles/view.php?cid=6&id=1247&pg=12
The author write:
"One of the problem we encountered was the transistor positioning near the AGP slot. With extremely lengthy AGP cards, one of the capacitors located in that area may obstruct certain components on the graphics card. As such, users with large graphics cards might want to first test the installation of a graphics card before purchasing this motherboard."
I have a Gainward 6800GT Powerpack Ultra/2400 Golden Sample, the red model with double red fans, visible here http://www.xbitlabs.com/articles/video/display/gainward-ultra2400.html
Approx 21 cm lenght. There is any mounting problem with this graphic card and the K8N NEO Platinum?

Quote
Originally posted by ozzimark
currently all 6800gt's and ultras are based off the same reference boards, so they're the same exact length as the one you linked to in your first post, however, i also have the stock cooler.. the gainward has one that is significantly larger, but i feel that there isn't anything in the way of mounting that card.
In fact this is my fear
The cooler on my card is very big, but i don't want to eventually modify it in the future because it's in warranty. Someone know what is the height of the three damned capacitors? If i know the height, i can estabilsh if this gfx card can fit without troubles in the motherboard. I want an MSI don't want to buy an Asus

K8N Neo platinum with 3 Ram slots full?

Looking to upgrade my Athlon 64 3400+ (ClawHammer C0) from 1GB to 2GB.
One of the options would be to add a 1GB DIMM to the two existing 512MBs. I know this would drop me back to DDR333, but would there be other problems?
The board's a K8N Neo Platinum.
Thanks in advance
Derek

Quote from: wazzledoozle on 26-March-06, 05:58:58
It really depends on your processor, since that is where the memory controller is. The newer Sempron 64 based on venice cores can handle 3 dimm's at 400 mhz fine (I think)
Newcastle cores and the older Sempron have issues, im not familiar with them so I dont know.
well, your close.....newcastles (least the one i have) and venices (for sure) can handle the 3dimms (in most cases....depending on ram brand, timings, etc...) and keep the 400mhz. i know i read a review somewhere that the memory controllers on clawhammers are Low Latency Brand picky. most of them would produce errors out the wazzoo with (for example: corsair 2-3-3-6 1t memory ) common ultra brand memory. i remember this review showing the twinmos wouldnt even post. i had a choice between two processors (3400+ clawhammer and the newcastle i have) i wanted the clawhammer cause i here they are wannabee fx's in the makin when overclockin but i did my homework (read/searched many reviews) and found that the clawhammer and using 3 double sided LL memory modules was a shot in the air. didnt want to take that chance for 512k more cache and have a unstable puter. i MUST have my patriot memory (cause they rock...) so when newcastle came i placed my dual channel (512mb x 2) kit in and walla....workin fine...placed my 1 gig stick in..... .......i bet the clawhammer would of worked (since i havent herd any issues with memory and clawhammers) but didnt want to take the chance.
what was your cpu stepping may i ask?? CO was the big booger that had memory picky issues and not being able to use 3 dimms at 400mhz stable.
edit to my previous post.....
1 dimm used (dont matter on what size of memory module) would yield the best bandwidth scores. 2 or 3 dimms being used would yield same scores (and not matter which stick in what slot.....all combos gave me pretty much same scores).

MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

Hi all,
Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
First all all system specs:
Athlon 64 3700+ Clawhammer
MSI K8N Neo Platinum -
1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
Nvidia Gefore 6600GT
1 x WD Raptor 10000rpm HD
NEC 2500a DVD writer.
Eye-T 550w PSU.
Vapochill SE Case with installed Vapochill Phase change cooling.
Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
The reason for that is because the two wont work together and I want them to so so bad...
So, hopefully someone here can save the day for me - here goes.
I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
I have also retested the Vapochill case with another motherboard and that also works without a hitch.
The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
If I press the power button the same thing will happen over and over.
I have tried a different powersupply and this does nothing at all.
I have checked for shorts and there is no possible way it is shorting on anything.
I have a fan plugged in where the CPU fan would go and this doesnt help.
I have taken it back out and tested it again and it still works ok.
Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
Any help would be greatly appreciated.
Glenn

When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ? Are you using the wires from the Vapochill case, or something else ? It looks like a single cable with an intermittent switch (red/white cable). I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly. Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this. It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

Kingmax Hardcore DDR500 with MSI MS K8N Neo Platinum (Bios Version 1.40)

I am interested in Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM. Currently, I’m using MSI MS K8N Neo Platinum (Bios Version 1.40) with AMD 64bit 2800+ & MSI MS 8907 FX5200-TD128 AGP Card.
Please advice whether the Kingmax Hardcore DDR500 (PC4000) 512MB DDR-SDRAM compatible with my systems.

The "safe mode" that the BIOS message refers to is not related to Windows' Safe Mode. The BIOS safe mode lets you un-do any overclocking or memory settings that might make your computer so unstable that you can't even get into the BIOS settings to change them. In that case, you hold insert while powering on to reset the BIOS to default safe values.
As for your problem getting into Windows' Safe Mode. If you upgraded from another motherboard that uses a different chipset, or if you somehow got the wrong chipset drivers installed, then the old AGP GART or chipset drivers will cause the system to halt/reboot very early in the Windows boot process even in safe mode. I've run into this problem before and its tricky. Best thing to do is switch back to the old motherboard, then go into safe mode and remove all chipset-related drivers, and then switch back to the new motherboard. If you can't do that, try running system repair from the windows setup CD. And failing that, you'd probably have to fully re-install the OS.

The same old problem with temperatures (K8N Neo Platinum)

I have problems since bios v1.0 on my K8N Neo Platinum with temeparutes.
I have installed a Prometeia Mach II St colling unit
I Tested the v1.0 official bios, the temperature was allways -65º full ou idle, what it is impossivel.
In the moment i flashed the bios to v1.2b5, temperature changed to 49º, and I did not move in nothing. The same temperature appears in all bios since v1.2b5. Now I have the v1.4b2 bios
Sorry the Bad English

Here are the instructions to reflash the BIOS for your K8 Neo. I am currently running ver.1.4 with little problems. My only snafu is the LED for my optical mouse stays lit even when system is off, however I have no RAID, Ethernet, onboard sound, or SATA drives. I have just a simple basic system, and I don't overclock. My board is the K8 Neo Platinum socket 754, with an AMD64 3000+. YOU MUST HAVE A FLOPPY DRIVE CONNECTED TO SYSTEM FOR THESE INSTRUCTIONS TO WORK!.
Flashing BIOS on K8 Neo per MSI. READ ALL instructions before starting.
1.Check your BIOS for flashing protection and disable it.
2. Know your board model#. a. Open case and find model# on the board between the PCI slots, or b., boot system and at first DOS screen you will see 'W7030ver1.4122101'. This means you have a MSI model 7030 motherboard with BIOS version 1.4 issued on 12/21/01.
3.Download the Bios that matches your motherboard model and version#.(I believe the Neo Plat had two versions, 1.0 and 1.1). I have 1.0. It will be found between the PCI slots. Create a folder on C: drive labeled 'C:\TEST'
4.EXtract the BIOS file to C:\TEST folder.
5.Create a boot floppy. For XP, at Desktop double click My Computer, right click floppy drive, click Format to format the disk, then click 'Create MS-DOS Boot Disk'.
6. Set boot order to floppy. Hit F11 to select boot device.
7. Insert boot floppy and restart system.
8. At A:\ prompt type in the following,
C:\ (enter)
cd\TEST(enter)
awdfl833c(space)w7030nms.130
The w7030nms.130 is the BIOS file name you downloaded to C:\TEST. Keep in mind you're dealing with DOS file names, so you may need to open a DOS window in Windows, and search C drive for the TEST folder and write down the DOS file name of the BIOS file BEFORE you start the BIOS update.
9. Reboot when prompted. It shouldn't take more than 10 seconds to update the BIOS.

Turn on PC with keyboard [K8N Neo Platinum]

Is it possible to turn your pc on by pressing a button on your keyboard? I have a friend with an old pc (1,5 ghz P4), and he claims that he can turn his pc on that way.
So technically I'm asking you if you know how to do that. Is there a BIOS option in which you can configure the keyboard button on which your computer will respond and go on automatically? That would be very handy.
My motherboard is the K8N Neo Platinum with a 3000+ socket 754. He has an ASUS motherboard.
Thanks.

Check the manual. It should be an option in the bios. I have it in my bios for my board, but when I helped someone put together their machine with a K8N Platinum 2, I didn't see this as an option in that bios. It may be that power on by keyboard and/or mouse is not an option for your board.

Problems with 64 3200+ on MSI k8n neo platinum.

AMD Athlon64 Newcastle 3200+ AX 2200MHz/2.2GHz 512kb Boxed (with cpu-cooler!) Socket754
MSI K8N Neo Platinum nForce3 250Gb 3DDR-DIMM 5PCI SATA Raid Audio GB-LAN Firewire Socket754 ATX
Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3
Okey here it comes..
I installed everything and all seemed to work okey, until i threw in the XP install cd and began my install..
in the dos install of windows xp, (when it moves files to the hdd) it stopped and said that there was a problem with a file that were to be copied, i pressed enter to try again and the install moves on, this accurs 4-5 times and then it gives me a BIG "IRQL less or not equal".. Blue screen of death.. (it complains on different files each time i try to install xp, tried 15-20 times)
I have tried to change memory to another Kingston KVR400X64C3A/512 512Mb DDR PC3200 400MHz 184pin Unbuffered CL3 with no luck,
changed hdd, change gfx-card. change psu, removed all no-need pci-cards..
but still same error, i aint no expert so i might have missed something in bios or something :(
please help me if you can..

Flashing bios with memory errors is a veeeeery bad idea .
Almost guarantied to ruin your bios chip with bad data block.
That this even is suggested with mem errors , well .
You need to resolve the mem errors before doing anything else.
The windows xp install routine is a very heavy user of cpu and memory
and will fail if you have mem errors like you have.
Some things to try is entering bios and change auto settings on cpu voltage
giving it 0.5v more than default .
Set the memorys voltage to vendors max approved voltage
which for yours is 2.6v +/- 0.1v . So it's safe to set at 2.7v .
Set timings to cas 3 ,ras 3 ,trp 3 , tras 8 , CMD 2T.
Pushing it firmly down in the dimm socket , sometimes it's not all the way down there even if the plastic lockers snap in.
Disconnect all devices not needed for a windows install ,things can be added later.
Have only the hd that os is to be installed to , one cdrom , floppy , memory and
gfx card .
Disconnect USB case front connector (cause corruption and strange faults if
USBOC pin is connected)

Help with MSI K8N Neo Platinum

HELP please- motherboard MSI K8N Neo PLATINUM: I tried to take away the backplate for the heatsink (on the back side of MB) in order to install the zalman HS beafore i read the forum (use a fan...) and the worst of all happend:
I scratched the back surface!! the scratches are minor, that is 4 scratches half a milimeter long each and not deep but i can see the copper of some lines leading from the memory slots to the processr. My question is : can I try and build the computer on that motherboard anyway or better buy a new one? is there a risk of dammaging other components? oh god what a mistake!

Make sure the new backplate is non-conductive. The backplate for the Hyper 6 has a non-conductive sticker on it. Make sure to keep it on if youve got one... If the lines are exposed even with the back-plate on perhaps you should cover them with some non-conductive (100% non conductive!) tape or something.
Then it doesnt matter if they are exposed, as long as they are ok.
A good tip, which got when i was removing my backplate, is to use a blow dryer to heat it up and the remove it with your fingers. That way youll also notice if it gets to hot
The glue gets sticky at blow drier temps. And pls, dont singe the MB with your blow dryer, you only have to make it hot, and if you cant touch it, how can you remove it with your fingers?
I guess theres no way of telling if you have a serious prob and no way to tell if your cpu will be ok. I guess you could (?) try and start it wíthout anything (cpu, mems) but a PSU, and then, if it (and maybe the PSU) goes "!Pfsssssss!" or "bang!", youll now you will have to replace it.
I put a screwdriver through an asus board once, and it still worked...

K8N Neo Platinum with Venice vcore problem

Hello,
I got a new Socket754 CPU Venice E6 3000+ and replaced it with NewCastle CG 3200+.
But BIOS indicates VCORE is 1.9V+. It's obvious that it's too high and also CPU temp is 0C/32F.
Does anyone know how to fix this problem?
Athlon64 3000+ Venice E6
K8N Neo Platinum (MS-7030) BIOS 2.1
WD Raptor 36GB
Reserator1 Plus
Seasonic S12 500W
ATI Radeon 9800 Pro
SB Audigy2

Please create your own rig and put in your sig with details of PSU and BIOS rev. Have you OC'ing your pc recently?

How do you Norton Ghost 9.0 with K8N Neo Platinum?

Hi,
I have K8N Neo Platinum and I can't ghost! I use the Norton's Ghost 9.0 boot CD and push f6 to add Nvidia Raid Driver. I used 2 Nvidia Raid drivers. One was on MSI webpage date 6-23-2004 and the other was 5.10 driver .Both of them say nvidia.sys error and the computer reboots. Has anyone image or clone hard drive in RAID 0 ? What software do you guys to use to clone or image with RAID 0 with this mobo?
Please Help,
Scott

There are a few posts about seem to be varying degrees of success
Raid Setup Help
suggest forum search for Ghost
try PM pps to see what drivers they used
good luck

K8N Neo 2 Platinum - Any issues with with a ATI 1950pro 512MD AGP?

Similar Messages

Maybe you are looking for