K8n neo 2 platinum corsair xlpro troubles

New to the forum so forgive me if I make any mistakes.
Ive been trying to find some info on the k8n neo 2 platinum, but I havent found anything related to my problem, only some info on the k8n neo.
The problem is that I have a 1 gig dual channel corsair xlpro kit, when installed in dual channel mode the computer wont boot, absolutely nothing happens.
Tried single channel mode and that works fine, both modules run at cas timinngs of 2-2-2-5 at 200 mhz (ddr400).
Ive tried turning up the voltage to 2.7 and 2.8, tried booting with more relaxed timings, but again the system just wont boot when using dual channel .
Tried some corsair twinx xms c2pro memory but same problem, wouldnt boot.
even set everything on auto but that didnt help either anyone else having this problem or am I the only one and if anyone solved it plz plz plz tell me.
Thnx

I have 2x512 of Corsair TwinX PC3200XL and both work fine on my 754 Neo at their rated timings.
Though my setup is only single channel and proves atleast the Corsair is compatible with our boards.
Unless you can test another 1gig of ram your in a tough bind as its very possible your chip is defective, obviously having the dual memory controller built in.
goodluck

Similar Messages

K8N Neo 2 Platinum Computer just...stopped working! Help needed please.

Hey all. About hmm, a month ago I built myself a new PC (first time I'd done it from scratch and got some useful help here) Specs were:
MSI K8N Neo 2 Platinum, A64 3200+ Venice, 1GB DDR Corsair Value, Radeon 9800 Pro 128mb, 40GB Hard Disk IDE, 80GB Hard Disk IDE, CD R/RW Drive and a Tagan 420W (23A 12V+) PSU.
Ok, it worked the day I built it just fine and has NO hick-ups or any indication of a problem for the past month. Running temperature was very cool etc. Now, I last turned it on about 24 hrs ago, downloaded some PDF files, shut it down. All was fine. Woke up this morning. Pressed the power button: ABSOLUTELY NOTHING. ZIp. No hum, fan movement, anything.
Now, considering it seems to have broken whilst being turned off. What could be the problem? So far I've tried:
* Using a different power socket
* Using a different plug
* Reconnecting the power switch and motherboard power connectors
None of those worked. There wasn't a thunderstorm or anything so I don't think any kind of surge would have been the problem. I havn't tried manually shorting the power switch connectors. What's a safe way to do that? Any other suggestions? How can I test my PSU is infact doing something?
Thanks

Quote from: go_for on 01-September-05, 21:47:40
Try the easy way first, disconnect every cable from the back of the computer. Do a CMOS clear/normal as instructed in the manual. Connect the display(with power off), keyboard and power cable. Turn on PSU, press power switch, if it fires up, press and go into bios and do your settings, save and exit. Power off and connect the rest of your external stuff. Power up.
>
No luck :( Is it likely that my PSU has fused/broken in some way since I'm getting no response or fan movement?

K8N Neo 2 Platinum BIOS resetting itself

Hello
If I switch off the power to the power supply to say move the PC perhaps the BIOS resets to default settings. This is really annoying because it resets the date causing Windows XP to activated again...and again.....and again..... >:(
Any help would be greatly appreciated.
Specs:
K8N Neo 2 Platinum BIOS v. 1.D
AMD FX-55
Corsair TWINX1024-3200C2PT 1GB
BFG 7800GS
WD 250GB SATA HDD
Coolermaster Extreme Power 550W ps
WinXP Pro w/SP2

That fixed it
Thank you Sir, you are a scholar and a gentleman

K8N Neo 4 Platinum Sli & Athlon 64 3200

Somebody know if the mobo "K8N Neo 4 Platinum Sli" can work good with an Athlon 64 3200 (939)

Quote from: jrb357 on 10-March-05, 11:29:32
It'll work just fine with a 3200+. Just use some quality TCCD ram. If you plan OC'n some people are having some difficulty getting over a 220fsb. It seems that the newer cpu's are more prone to this, ones with a manufaturing date of under 0451 seem to OC better.
Aint that the truth!
IF you are planning to o/c then forget about this board for the moment, until a new bios is available......
That is the only downside to this board, otherwise its a very stable board!
I have corsair 4400 and cant get over 220 fsb with it....

Boot Problem with K8n Neo 2 Platinum

I cant get my Computer to load the bios
Sometimes when I restart my computer it will lock up in the Bios Sign on and the only way to get it to boot through is to keep resetting the computer and turning the power off and on. It does this on a random basis, Ive also had problems with it locking up if the dynamic oc is turned on.
Has anybody heard of this happening or know how to fix it?
MSI K8N Neo 2 Platinum Bios 1.4
Athlon64 3800+
TwinX 1024 3200LLPRO
Xtasy 9600XT
Ultra Products X-Connect 500w
2x WD Raptor 10,000rpm SATA HD in Raid 0 cfg
SB audigy 2 ZS
LiteOn cd/dvd drive
LiteOn dvd burner
Windows XP SP2

Corsair memory is known to be troublesome with AMD64.
Nevertheless, if everything is set correctly, it'll work. I've been running the LLPRO 3200 1GB kit at 220MHz without any noticable problems. Run a couple of rounds with Memtest86+ to verify memory functionality.
Can you please give your specifications on the power supply unit (PSU), especially the amperage on the +12 volt rail.
Anders.

Problem with K8N Neo 4 Platinum

Hi I am new on this forum.
I have problem with proper configuration of the BIOS in K8N Neo 4 Platinum. My processor is Athlon 64 3000. It has 1800 clock. My BIOS makes default 200MHz x 5. It makes 1000 MHz clock. Will it be good if I change at 200 x 9?
Other thing: I tried to change at 200 x 9 but in Windows (2000) is still 200 x 5 (acc. to Core Cell). When I chanded on 200 x 7,5 all in Windows was ok. Core Cell showed 200 x 7,5. How I may resolve this problem?

Quote
I have my memory in green slots. Does dual channel works in this case?
- No Green = Channel A, Purple =Chanel B use Green nearest cpu & adjacent purple slot.
Quote
HT freq. 5x
That's your HT multiplier as mentioned by Some1ne not the Adjust CPU Ratio which is the CPU multiplier.
Your CPU is running at the correct speed.
DDR Clock: 167 MHz s/be 200 - this should chnge when memory is in right slots.
Change memory over & let's have a look @ those settings then.
luck

Is a 24 pin atx cable needed for the k8n neo 4 platinum?

i have a Thermaltake Silent Purepower 480 Watt PSU. i am thinking about upgrading from an msi k7n2 delta to the k8n neo 4 platinum motherboard.
if i do this, do i need this adaptor cable?

Quote from: Deathstalker on 08-June-05, 22:18:54
ryansebiz,
That Power Supply has the 24 Pin Cable as part of its cables. You do not need any adapters.
Take Care,
Richard
thanks richard, you saved me $11 on a cable adaptor

MSI K8N Neo 2 Platinum motherboard extra firewire ports?

I'm installing an MSI K8N Neo 2 Platinum motherboard into my case and although I don't need them right now, I would like to be able to access the extra firewire ports. Does anyone know the best way to get ahold of the MSI motherboard 1394 connectors for J1394_1 / J1394_2 option?
I have the D bracket with the LED's and two extra USB connectors but I don't have the firewire connector. I have USB ports and audio ports on the front of my case which I will use, but no firewire connector, but there is a place for one, just no connector/wires or hardware. Also what is the difference between those two connectors shown in the picture of the optional firewire that appears in the owners manual? They have a different shape.
Where can I get one? I don't need the proprietary peice if I can use something else.

Fireware ports are faster for example external drives will be fastest 1394 rather than usb2.
there are many companies doing drive bays which can add ports to your current case see Front Port Extension Unit however you need to decide what exactly you want,
The example shown passes through case & connects to rear ports.
I prefer ones hich connect to the mobo risers leaving rear ports free, however you then have the complexity of matching the pin outs so that it works with your system. Remember it's not like tring to boot, you may not get a 2nd chance if you miswire connection. . If you can find them the best connectors are those with single pin leads, where each individual wire has its own plug so that you can match it to the mobo's pin out diagram for the particular port.
luck

K8N Neo 4 Platinum 1.8bios any try?

K8N Neo 4 Platinum 1.8bios any try?
better 1.3? 1.6? oc and stableand less bug...anyone try this?

After using the 1.6 BIOS for quite some time (ref. to my signature) I am testing the 1.8 BIOS now for some days. It was introduced in the German MSI forum (here) some days ago and also other people already reported their first experiences:
- works fine
- some more options in the BIOS are available (e.g. disabling seeking for a floppy, RAID on all IDE drives + SATA drives)
- however, only 4 memory dividers (100/133/166/200) available in 1.8 MSI final; some hidden options are available in the 1.8 MODBIOS from MurdoK (download 1.8 MOD BIOS here )
- 6 memory dividers available in 7125XMOD18 BIOS thanks to MurdoK (download 1.8 XMOD BIOS here) (I have not tried this XMOD BIOS yet!)
- does not solve the "219 BUG" for Winchester CPUs.
- USB2.0 works fine, in contrast to some 1.7x BIOS versions
In fact, I have not found major advantages for my rig, however, it seems to be also not worse than the 1.6 BIOS, what I used before. So I continue to stick to it!
Regards
Juersei

250GB harddisk work in MSI K8N Neo 4 Platinum

Hi!
I have a pair of WD 250GB SATA2 16MB cache harddisks (WD2500KS).
Currently they don't work in my Asus A8N-SLI DLX (BIOS messes up LBA and CHS setting with them)
(smaller 120 and 160 GB hdds work flawlessly in that mobo)
So i am considering to switch to MSI K8N Neo 4 Platinum.
can anyone confirm these babies would work in that mobo?
Are there any known issues with higher capacity harddisks on MSI nforce 4 boards ?
also i hear that the chipset fan is very noisy. Is that true?
The other option would be the Abit A8N Ultra which has the heatpipe design but i am not so comfortable with Abit, since there are too mayn rumors about them.
Any ideas?

not heard any thing with nvidia
there is a thing with some via
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=1337&p_created=1112379341&p_sid=MZ4D46Jh&p_lva=&%20p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX<br%20/>%203Jvd19jbnQ9NiZwX3Byb2RzPTIwMyZwX2NhdHM9MTMwJnBfcHY<br%20/>%209MS4yMDM7Mi51MCZwX2N2PTEuMTMwOzIudTAmcF9zZWFyY2hfd<br%20/>%20HlwZT1hbnN3ZXJzLnNlYXJjaF9mbmwmcF9wYWdlPTEmcF9zZWF<br%20/>yY2hfdGV4dD1qdW1wZXI*&p_li=&p_topview=1

Msi k8n neo 4 platinum sli sata issue?

hi i am planning to buy a new motherboard and i decided to buy k8n neo 4 platinum sli board. but recently i heard that it has an issue with
silicon image SIL3132 controller that If there was no drive connected to the controller, the system wouldn't complete the POST. does that issue resolved now? please tell me. any new bios update for that?

hi satya123 ,
Quote
silicon image SIL3132 controller that If there was no drive connected to the controller, the system wouldn't complete the POST
not heard of that one.
But it's easily sorted :-
Bios - Onboard Devices
OnBoard Sil3132 RAID
This setting controls the onboard Sil3132 RAID chip. Setting options: [Enabled],
[Disabled].
OnBoard Sil3132 Mode
This setting allows you to select either SATA and RAID mode for the onboard
Sil3132 RAID chip. Setting options: [SATA], [RAID].
just set OnBoard Sil3132 RAID to disabled.
Sorted

MSI K8N Neo 4 Platinum Clarification of SATA

Hi Folks!
Just some clarification from you guys in the know.
I have an MSI K8N Neo 4 Platinum Mboard. The specs say it will run SATA drives and am looking to upgrade.
Now from shooping around for price i was presented with three options.
SATA 150 , SATA 300 and SATA II
I have worked out that SATA 300 and SATA II are superior to the 150 but is my board capable of running any of the three or is my choice limited.
My motherboard specs just show that it is SATA compatible but no further info.
I would appreciate any help.
Thanks in advance.

Q-Tex, All your nVidia SATA ports [1-4] are SATA II 300 mb/s and the Silicon Image SATA ports [5-8] are SATA I 150 mb/s. SATA II drive brands to consider are: Seagate, Samsung, Hitachi, WD [I know from personal experience that Seagate 's work]. I belive that there are still issues with Maxtors. If buying drives from retailer with a high turn over you will get a drive with the latest firmware [has the bugs worked out] and if you buy a drive that doesn't have the latest firmware it's not the end of the world - you can get a firmware upgrade if neccesary.

MSI K8N Neo 4 Platinum Smart CPU Fan reports 0 rpm ?

Hi
I have a MSI K8N Neo 4 Platinum (MS-7125) motherboard with an Athlon 64 3700+ CPU and an Arctic Cooling Silencer Ultra 64 HSF.
In the BIOS setup, in the 'Monitor H/W' area you can set something called the 'Smart CPU Fan Target'.
o If I set this to disabled, it reports a fan speed of about 2,280 rpm.
o If I set it to 40°C, it reports a fan speed of 0 rpm ! (the fan is turning)
The MSI Core Center utility and Everest Ultimate also both report the fan speed as 0 rpm.
I assume that if I disable Smart CPU Fan, the fan always rotates at max. rpm; if I set it to 40°C, the fan runs at a slow speed until the temperature exceeds 40°C, at which point it speeds up (likewise if I set it to 50°C or 60°C). However, the fan IS turning.
Can anyone explain this ? I would like the reassurance of having the CPU HSF speed reported.
Incidentally , the PSU is an Akasa AK-P460FG
(3.3v = 30A, +5v = 30A, +12v1 = 14A, +12v2 = 15A)

Very old post yes but I feel the need to reply anyway because I have the same problem myself.
Very strange and would be nice to hear if any more of ya guys out there can see the same.
Patrick

Please help! K8N Neo 2 Platinum instability problems

Hi!
At the fall of last year I bought new computer parts for a new system, the heart of it being a MSI K8N Neo 2 Platinum. Ever since then I have had some instability problems. I tried for a while to fix them, but after a while lost the energy and have just accepted them. Now, however, I want to give this forum a try for help. The instability is irritating and I've been thinking of returning the motherboard.
The system consists of:
MSI K8N Neo 2 Platinum
2 x 512 MB Kingston Hyper X PC3200
AMD Athlon 64 3200+
Gainward Geforce 6600GT AGP
Trust 514DX 5.1 Sound Expert Optical
120 GB Seagate SATA HD
NEC DVD-RW ND 2510A
Zalman ZM400A-APF PSU
Nothing is overclocked. I also have a Terratec TV-card that I never use.
I'm running Windows 2000. I have the latest BIOS, 1.C. I have tried many different Nforce drivers, right now I'm running MEI's nWare Release 06.05a.
The driver for the GPU is 91.28. Every other driver should be the latest there is.
The problem I have is that the system freezes up in Windows now and then. The "funny" thing is that I can run Memtest 86 for a whole day, Windows memory diagnostic all the way trough and I can play games (most of the time) for hours. I have also had the computer doing video compression for days and days, so I would say that it seems kind of rock solid. The freezes seems to happen (I'm guessing) when there is lots of communication going on over the southbridge. It often happens when the HD is working and the CPU perhaps get loaded at the same time, or for example if I'm ripping data from a DVD and starts doing something CPU heavy at the same time. That is an almost guaranteed recipe for freezing. Sometimes it freezes when I'm doing "nothing", but I guess it might also be when Windows is swapping, or something.
I remember reading about problems like this before, with other motherboards. I'm thinking that perhaps some BIOS latency thing could fix it. Perhaps a hacked/tweaked BIOS? Or is the motherboard in fact busted and needs to be returned?
Any thoughts, ideas or tips are welcome. Please help!
Thanks in advance!

. . . I'd half to agree 100% on what BAS is pointing out . . . . . . . .
........also, for kakarocht's reply for the matter as well....
.....{ my opinion = 450w at least of a PSU, and, >>> what BAS is stating about's the 12v line, YES, BIG requirement for your system's _ component's of } .......
mr. Charles
.

MSI K8N Neo 2 Platinum and pci

i have a problem with my neo 2:
The mainboard dont recognize my Soundblaster audigy 2 zs.I tried every pci slot with bios 1.3, 1.36 bitpower and 1.4, but nothing.
Some one can help me?
this is my sistem: A64 3500+ winchester | MSI K8N Neo 2 Platinum | OCZ EL PC-3200 DC Plat. Rev. 2 2X512 MB | Sound Blaster Audigy 2 ZS 7.1 | Powercolor X800 XT Platinum Edition | Hitachi 7K250 80GB SATA | Maxtor D740X 40GB ATA | Maxtor DiamondMax Plus 9 40GB ATA

no overclock at moment and the sound card of mb is disabled.
i tried another pci card but no way. Not dedected from sistem.

K8n neo 2 platinum corsair xlpro troubles

Similar Messages

Maybe you are looking for