K8N Neo-FSR ~= K8N Neo Platinum

May have to replace my motherboard - a K8N Neo Platinum. Have seen the K8N Neo-FSR, from its spec I assume it is the same, apart from only 2 rather than 3 Ram slots?
Thanks
Derek

Hello !
You can see both specifications here:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=572
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=571
Greetz

Similar Messages

PT880 Neo-FSR -- Px8 Neo-V Error in XP and games..

Hi!
OK.. Why is there so many problems with this motherboard? 3 days have i had this card and just problems ... WHY?
I have updated the bios to v1.9 Uhh! Now i can come ind to XP without the blue screen saying Hardware error...
But i can't still not play any games... example Underground 2 nice game. the same about all benchmark tools (3dmark)
I have tried old and new drivers! nothing helps.
Thanks!

Everest 1.51 writes it is a MSI Px8 Neo-V (MS-7043) with bus on 800MHz !!!
Thats really nice! The board is a 533 thats oc'et... :(
VIA® P4X533 Chipset
- Supports FSB 400/533/(((800MHz (over chipset spec.))) <--- WHY
- Supports AGP 8X interface
- Supports DDR 400(over chipset spec.)/333/266 memory interface
A did buy it as a PT880 Neo-FSR (((PT880 = 800MHz)))
PT880 http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=636
Neo-v http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=593
There is just one thing? my board has 3 memory ports but neo-v has just 2...!
Memtest? Why? My Hardware works 100% on my fiancé's computer... The only thing that is 10% is the motherboard...
I will give back the board and hope my Abit VT7 comes soon...

K8N Neo FSR - IDE Trouble (I think)

Hi.
I got two identical systems I try to setup, and it has been nothing but trouble for the last 2 days. All following descriptions goes for *both* systems.
Installing XP Pro with SP2, fresh. Getting read errors from CD's, then write errors on HD. Blue Screens and instant re-booting.
PFN_LIST_CORRUPT 0x0000004E is the first to occure
IRQL_NOT_LESS_OR EQUAL 0x0000000A is the next.
2 brand new intallation disks used.
Installing W2k, ...see above, same happens.
Tried with both hitting F6 and installing the provided drivers on floppy, and using Windows default drivers. Same result.
Tried disabling all SATA/prefetch/NIC/USB/whatever in BIOS, same result.
Tried Crucial / Corsair / TwinMos / No-branded RAM, same result.
Tried ThermalTake 480W, Q-Tec 450W and Chieftec 420W
Tried with shipped BIOS 1.1 and 1.40
HD strapped as CS or Master, CD strapped as CS or master...tried all 4 combos, but install somehow 'made it' with both set to CS on separate channels.
Ok. Now the OS is on the box:
W2k - Login - BSOD - Reboot
XP Pro SP2 - Looks fine, just do NOT touch the disks:
Defrag - Reboot
Install e.g. Office - Reboot
Norton AV-scan - Reboot
Memtest 12 hours - No problem
Anyone got any idea of what is going on here???
rgs
/irh
ed: AMD A64 3000+

Hi.
Yes I've tried, but all but CS is making things worse.
I just rippet out the MOBO from one of them an hour ago, and replaced it with a K8N Neo Platinum, using the drive as it was. Same jumpers - same OS. And guess what: XP found a bunch of new hardware, and the machine has just completed its first virusscan. No problems at all.
Guess this just confirms that there is an issue with the Neo FSR. I've setup a bunch of the Platinums before, but this was my first (and very last) two FSR's
rgs
/irh

K8N Neo FSR, Please Help a Newbie

Hey all,
I'm new to these forums and was wondering if I could get some help or advice. I currently own an athlon 64 3200+ newcastle with a K8N Neo FSR motherboard. I have heard that my mobo is basically a platinum minus the luxury of firewire ports, could I be correct about that? If so, I went to msi.com.tw website to update my drivers and could not help but notice that K8N Neo Platinum has two more updates that whats offered for my FSR, those being CoreCenter 1.7.0.0 and DigiCell 1.03.00.00. I find corecenter to be useful and am wondering will these two updated versions of the apps work with my FSR, and why would MSI not post the updates in the FSR section.
Also, my board came stock with bios 1.2 and I loaded up windows sp2 and all the drivers and such and everything seems to be working fine to my knowledge, cool n quiet on with cpu around 994 to 1004 mhz, temp readings from bios and sandra all report 36-43 degrees C. Does that sound right to anyone, because I'm not a fan of bios flashing, would flashing to the newest official 1.4 be any benefit to me?
One last thing, I encountered a problem with a creative usb mouse and do not know the source of the problem or how to solve it, it is the optical mouse lite with a blue scroll wheel and operates fine, but after I shutdown my computer the mouse light is still on, is that normal or is there anything I can do about it besides shutting down my power supply everytime I turn off my computer.
Sorry for the loads of questions, if anyone actually reads this please provide me some input/insight. Thanks in advance.
System specs:
A64 3200+ Newcastle Year 04 Week 26
MSI K8N Neo FSR Bios V1.2
512 MB PQI Turbo Black Memory
Aspire 500 W psu, 12v = 34 amps
Maxtor 60 gig IDE hd
52x32x52 cdrw

If you look at the prduct page for the K8N Neo FSR, and choose the BIOS link it brings you to page:
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=571&kind=1
Which shows the BIOS' available for the K8N Neo FSR. Notice that 1.3 and 1.4 are available and that the K8N Neo FSR is considered to be a MS7030 which is the same model number of the K8n Neo Platinum. From this I surmise that you can use the same BIOS and drivers and all that the Platinum uses and everything should work fine.
RB

MOVED: K8N NEO-FSR - Can't find network unit?

This topic has been moved to AMD64 nVidia Based board.
https://forum-en.msi.com/index.php?topic=118264.0

Quote from: Stu on 09-July-08, 03:00:42
Check that onboard LAN is Enabled in BIOS (under Integrated Peripherals)
Was "Auto"
Quote from: HenryW on 09-July-08, 04:58:56
Looks like they're here for K8N Neo-FSR.
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=573
Will try this one, thanks! (Will post if it worked a bit later)
Umm, btw... Where should I extract the files?
Quote from: Fredrik Åsenius on 09-July-08, 05:07:48
Tjena Rikard! You have to describe your system in some detail.
Some famous culprits:
- Other PCI-cards.
- Poor or old Windows installation.
- Weak PSU.
- IRQ problem.
- A combination of all or any of above.
The network card is not a PCI-one, but integrated to the motherboard. Only card in the system is a PCI-E graphic.
Maybe poor or old windows, might try that...
Shouldn't be weak PSU, It's pretty good, I've been told.
IRQ?

S3 mode doesn't work fine on K8N Neo-fsr since overclocking, please help!

I have a K8N Neo-FSR (MS-7030) BIOS version 1.6 (I tried 1.4, 1.5), running AMD64 2800+ SK 754, 2x 256MB DDR400 Kingston valueram pluging in slot 1&2. It runs well except S3 mode .
Since I overclock HTT (everythings else have their own default values), S3 mode seems to work so crazy . After wake up from this usefull stop-grant standby mode, HTT is given back to its original speed, 200MHz, without notice (?!) .
You know that I don;t like this much, do you?
Who responsible for this function? Mainboard or CPU? If it's mainboard, which department will be sentenced, BIOS or chipsets/ICs?
Could anybody give me a solution to achive higher speed by overclocking without giving up using S3?
Thanks so much!

It's a bad new! I had bad feeling about DFI with the same problem, S3 mode resuming bring FSB back to df and even sometimes led the system to the ruin. But upgrading bios solved this issue. My old Abit did S3 mode fine. Now I have a new MSI and once again I must use teknophyle's way or slow hibernation instead.
On the same occasion, I wana ask about some shortcoming in 1.6 bios: power on by keyboard/mouse and power led options. I only found S3 wake up by keyboard/mouse but not keyboard/mouse power-on options! There is power led option in version 1.56 but it disapeared in 1.6. Now my mobo has no signal to differentiate between sleep and power-off. would you give back the useful power led option and add power on by combination keys in the near future bios version, syar? Look forward to hearing some good new from you :D.

K8N Neo-FSR doesn't boot

Hello everyone
I got my mobo (K8N Neo-FSR) more than 6 months ago, and worked without any problems until today.
First of all, I made a BIOS update from 1.7 to 1.9 using MSI Live Update. No problems to report, the computer worked after that for several hours. Then I turned off the PC. And the next time I wanted to turn it on, it didn't boot.
Here's my D-Bracket message :
This corresponds to "Initializing keyboard controller"
The problem is that apparently it has absolutely nothing to do with my keyboard, as I tired changing it.
Clearing CMOS didn't help.
Any ideas how I can fix this? Or should I contact the support?

Before you answered, I tried to check the RAM. As a matter of fact by removing one of 3 memory sticks the computer worked. Later I figured out that if I lower the RAM frequency from 200 MHz to 166, all 3 sticks work perfectly well.
Now the question is : WHY THE HELL DID THIS BIOS UPDATE MESS UP MY RAM??? Weird.

Who have v1.56 bios for K8N Neo FSR,give me please.thx

who have v1.56 bios for K8N Neo FSR,give me please.thx

Bios Collection. *Updated * 7025 1.B beta4 follow Syar's MSI Nvidia64 Bios Collection link.

Cannot find the Power Led connector for JFP1 to connect on K8N Neo FSR

Hi,
I have just bought the MSI K8N Neo FSR (MS 7030) to build a new computer with (amongst others) an Athlon 64 3000 processor and an Enermax 3051 case.
I can't even get a start: if I click on "Power" I just get a red light under the Power button for 1 second and nothing start.
This may be related with the fact that I did not find a "Power LED" connector for JFP1 (I have connected all the others connectors, including the Power LED one for JFP2).
Thank you in advance for your help.
Precisions:
At the beginning, I had forgotten to connect the ATX 12V power connector on JPW1.
After having done that without getting an improvement, I did a Clear CMOS (after having unplug the power cable).
Now the CPU fan begins to turn just when I switch the power on from back of the case (and not from the power button) and stops turning after five seconds.
Sometimes, I get an orange light during 1/2 second on the D-bracket LEDs.

Quote from: Dr Stu on 20-November-05, 04:36:29
evidently if he fixed it, the solution was posted elsewhere
so what have you tried so far? has this system ever worked?
post your PSU specs. try powering up board outside the case in case there is a short somewhere
I have tried a different power unit, different JFP1 configerations, removing and replacing MB battery, changing the jumper settings on JBAT1 to clear CMOS.
Everything is just dead, no power anywhere. I get the fan light inside the Power unit to light up for 1 second when i connect the power cable and thats it. Its a 450 Watt power unit so it should be plenty. Maybe i will try removing the board and starting it that way.
This system has never worked, i just built it.

MOVED: k8n neo fsr overclocking results

This topic has been moved to Overclockers & Modding Corner.
k8n neo fsr overclocking results

well i dont know much but im pretty sure u should set memory timing to 1t

K8N Neo FSR Bios overclocking functions help needed

Hi all, I am a small pc builder for the family and i have found some problems with the bios of my uncles K8N neo FSR which I recommended for him. Basically it wouldn't seem to overclock with the 'Dynamic Overclocking' function on bios v1.7 but did manually by adjusting FSB incrementally (ie from 200 to 205 Mhz). When I questioned this before someone had mentioned that it could be ok to run like this. However I have since updated the bios to v1.9 and even v2.1 as they became available but now neither seem to overclock manually nor using 'Dynamic overclocking'
Firstly though, can someone clear up my first conception; To test if the Dynamic Overclocking function is working can I set it to a higher setting (ie.'Commander'), save and exit bios (restarting) ---> go straight back into bios ----> go straight back into Cell Menu and check 'Current frequency of cpu' has changed?
I only ask this as if this is the case then my Dynamic Overclocking function hasn't worked with three bios' and I wont bother with anything until I RMA the board lol, as I have never been able to change the frequency of my cpu at boot/bios stage with the dynamic overclocking function.
Can anyone help me?

Hi Stu, yesterday I think i found out what u mean lol. I studied a 'Sticky' ? about overclocking A64s and found some interesting stuff. Apparently overclocking the HTT is dangerous, and A64s are always at least half locked. Now with this in mind Ive been wondering if there are interlocks built into my mainboard stopping me from using the 'CPU Overclock' function to overclock my pc manually from the set 200Mhz while my HTT is still set at 4x. -I say this as the HTT on my system is 800Mhz for a socket754 Sempron 3000Bx, thus overclocking this would increase my HTT above the 800Mhz threashold (I think) lol. All sounds complex but I think Ive figured it out as Im following instructions from the sticky to lower my HTT multiplier before increasing my cpu overclock. Its hard as my mainboard has Nforce3 chipset which has different ways of overclocking to every other board lol. So far I have managed to increase the overclock, but only when the HTT multiplier is lowered to 3x. I have also lowered my cpu multiplier though, and thus am trying to figure out where my 1810Mhz clock speed has changed to 1630 lol. Will try again now. I want to raise the clock speed above 1810, keeping the HTT lower than 800 and leaving the memory alone at 400DDR lol. Im hoping the memory is seperate as it seems to be on this chipset.

Does the K8N Neo-FSR support the mobile chip out of the box

just like the titles says
does the K8N Neo-FSR support the mobile clawhammer out of the box.?
if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

Jim,
From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice. It's also reported to have some performance improvement over Winchester and Newcastle. It will use a default 1.4v VCore. Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
If Monarch is shipping the combo with available Bios, you can bet they work. I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues. They shipped mine with B3, and I think there may be a reason. The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay. That's why you see those memory settings working on mine.
On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice. Use the Venus 7+ in my specs. It's low profile, all copper, and one of the highest rated. Monarch has it in their configurator. It's as quiet as AMD's. Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
Danno

K8N Neo-FSR v2.0 + Sempron 2800+ E6 = No Go?

Hello!
Wanted to assemble a rig for playing around with Ubuntu 64-Bit, so I headed out and obtained ...
... a MSI K8N Neo-FSR v2.0 (7030-20C, shipped with BIOS 5.10)
... a AMD Sempron 2800+ (Palomino, Step E6)
Upon power-on it refuses to POST ---> 1 continous beep
If I recall the AWARD beep-codes correctly this means that the CPU failed to initialize.
Troubleshooting steps:
- Stripped down to board + CPU + 1x RAM + GFX -> No Go (1 beep)
- Stripped down to board + CPU + 1x RAM -> No Go (1 beep)
- Stripped down to board + CPU -> No Go (1 beep)
Meanwhile I tested the CPU and RAM in in another S754 board a friend borrowed me ... both work fine.
So this leads me to the question:
Does anyone has a clue what might be wrong here? I don't have greater experiences with nForce boards so my knowledge about them is very limited.
Thanks for helpful suggestions.
-Storm

Quote from: syar2003 on 27-August-06, 20:29:14
This is the latest bios version of the 5X bios series (and should be a safe one since yours is currently running with 510).
http://download.msi.com.tw/support/bos_exe/mbd_bios/7030v54.zip
Don't know if it will add support for your cpu though.
Well ... as the changelog of the BIOS isn't exactly informative we would only know if I could get the board to POST so that I would be able to flash.
This however isn't a valid option as the board keeps on beeping upon power-on.
Quote from: syar2003 on 27-August-06, 20:29:14
Theese 7030 boards have become unbelievable hard to track as there are so many versions released now.
ref: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=688
This page also lists another bios series to use 1X and 9X series
In addition it lists 2800 E6 Palermo as NONE (which means not verified/under testing)
Direct link to many 7030 boards bioses are also gone .
You're right --- I did some more investigation yesterday and became award of the "too many 7030's" issue. The one I'm referring to is actually the one you linked at (K8N Neo-FSR V2.0).
As the sticker on the flash reads v5.1 I assume the board is PCB rev. 1 ... as the 9.x BIOS seems to be for PCB v3.0 only.
Took a look through the CPU Support ... and ... WTH?
Only Turion CPUs and one A64 (step E6) is listed as compatible?
Guess we found the showstopper ... either the board or BIOS seems to dislike the E6 Sempron then. Hmm ... guess I either return the CPU or the board. It seems as getting a Turion would be the better choice as the shops in my area don't have anymore AGP S754 boards (and the same goes S939 boards). I only need a rig to play with server setup-scenarios of Ubuntu 64-Bit and no powerhorse for gaming or such.
Thanks for pointing me to the CPU support list ... I would have never dared to imagine that a board will only run with a limited set of AMD CPUs ...

K8N Neo-FSR 4 Red LEDS

I put together an amd64 system:
K8N Neo-FSR
AMD Athlon 64 3000+
1024mb corsair valueselect (2x512)
When I power on, I get 4 red leds on the dbracket, which is supposedly a damaged or incorrectly installed cpu. I am 99% sure that both of the cpus that i tried were good, but I am 100% sure that one of them was. I also tried reseating them a few times. Is there anything else 4 red leds means?
Also, the computer turns on with the powers supply switch and the power/reset switches don't work at all even though they are plugged in to the correct places. Anyone got any ideas?

I had the exact same problem. Thought it was the CPU, so returned it and got a new one, and the error continued. Here's how I got it to stop:
Take EVERYTHING off the mobo. All the PCI/AGP cards and the ram. You can leave your drives hooked up, but unplug the power from them.
Then, try to reboot it. When I did that, it finally got past the 4 LEDs and gave the memory error leds. So I put in the ram, and it gave me the next error. So on and so forth. I kept putting in whatever piece of hardware it was crying about, until it got all the way through, at which point I put in my extra stuff (sound card, tv card). Yes, it's a pain in the ass.
When I was putting them back in, the only thing I did different is I put my tv card in the slot above the orange PCI slot (the one on the bottom that is "enhanced"). I'm wondering if that wasn't the problem to begin with.

[K8N NEO FSR] Running DDR 200?

I am currently using the 1.3 bios, and I see the 1.1 bios fixed this problem (or one very similar to it).
I have tried all three dimm slots and they will all run my ddr400 sticks at 200. Is this just a display bug? Should I get a new bios? Is it the ram?
AMD 64 3200+
MSI K8N NEO FSR (1.3 bios)
2 x 512mb pc3200 corsair value ram
eVGA Geforce 6800GT

Dual Data Rate.....200 x 2 = 400!!!
That is shown correct!
You are running at DDR400 speeds!!!

K8N Neo-FSR ~= K8N Neo Platinum

Similar Messages

Maybe you are looking for