K8N Neo MS-7030 754 socket, looking for parts

I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere. Also, any recommendation for a northgate chip cooler for ths board. Thanks for you time.

this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
Quote
I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
How to contact MSI.
Quote
Also, any recommendation for a northgate chip cooler for ths board.
Can anyone recommend me a Northbridge fan replacement?

Similar Messages

  • MOVED: K8N Neo MS-7030 754 socket, looking for parts

    This topic has been moved to AMD64 nVidia Based board.
    https://forum-en.msi.com/index.php?topic=105761.0

    this was posted in Other MSI Products area, so i moved to AMD64 Nvidia area for better attention
    Quote
    I am looking for the accessories for a K8N Neo MS-7030 mobo. Mine didn't come with the cables, d-bracket w/leds, driver CD. Can I order these through MSI, and how? Or does anyone have them to sell. Need help, cant find anywhere.
    How to contact MSI.
    Quote
    Also, any recommendation for a northgate chip cooler for ths board.
    Can anyone recommend me a Northbridge fan replacement?

  • K8N Neo MS-7030 Vista drivers

    This is my first thread here, and I have a problem with my K8N Neo MS-7030 754 Mobo. I cant get my USB port to work at high speed, Vista won't let me use a Kingston 2GB USB for Readyboost, ( stick is optimized for Readyboost). Also cant use MSI mobo utilities, no driver found. Will there be updates for Vista driver for this board? Running AMD Athlon64 3700+, Nvidia 6800 agp, 2GB Corsair XMS DDR400, 400w Ultra PSU, LG DVD lightscribe, Lite On CD burner, seagate 80GB 7200 rpm HDD, floppy drive, Diamond 7.1 sound card, Vista Home Premium OS. New to system building, this is my first PC, trying to figure the driver issue out. Thanks.......By the way, does anyone know how I can get a MSI USB D-Bracket W/4 led read out, and the accessories for this mobo, like cables, CD, etc.

    Quote from: Bas on 19-February-07, 01:52:33
    You have to wait for drivers to get released, very few are.
    You're not the only one, many people complain about the same problems.
    I just bought this board (MSI K8N Neo V2.0 H (MS-7030) NF3-250 Socket 754 ATX Motherboard), and expect it from Fedex any minute. I'd heard (in a thread at Anandtech Forums, where I first heard about this board - http://forums.anandtech.com/messageview.aspx?catid=40&threadid=2019857&f that nVidia was not going to support Vista with this board, and I'd assumed that it was an across the board thing with nforce 3 boards, but I may have been wrong to make that assumption. So, seeing this thread has raised my eyebrows and now I am wondering if I do indeed have to give up the idea of upgrading to Vista with this motherboard. What is the truth here? Has nVidia recently declared their non-support, or did I dream that up?

  • BIOS 2.1 K8N Neo Platinum 7030

    What about the latest BIOS 2.1 K8N Neo Platinum (7030) ? Is it safe to upgrade or should i stay at 1.7 (that really works great) ?

    If 1.7 is working for you I'd suggest staying with it. (Always a good idea even if the new bios is stable).
    I had problems overclocking with V2.1 (the ide initialisation hangs) and many others have complained about problems with more than one stick of mem.

  • K8N Neo (MS-7030) problem with Gigabyte 6600

    Hi,
    I got a problem with my K8N Neo (MS-7030) and Gigabyte 6600 together.
    I just tried to upgrade my system with the following components:
    PNY 5700LE  128M -> Gigabyte 6600 256M (GV-N66256DP)
    Onboard sound  ->  CreativeLab SB Audigy 2 ZS Gamer
    Here is my order of installation:
    1.  Win XP with SP2
    2.  Chipset driver 5.10  (5.11 crashed during installation) 
    3.  ForceWare 81.98  (I tried 77.72 from Gigabyte as well)
    The system went blank during (3) and never comes back.  In the last 3 days, I must repeated the above procedures over 20 times.  I tried combinations of diffierent version chipset driver with forceware, but still no luck.
    Audigy2 was sitting in the middle PCI before.  However, I encounter a few system lockup during the first 10 trials, then I found a post say Audigy 2 should reside in the orange, or the one far away from AGP, PCI slot.  Things seems better after this change.
    More detail about my system:
    MB: K8N Neo (MS-7030) BIOS is the latest version, 1.9. 
    RAM: Corsair Value 2 x 512MB PC3200
    PS: Antec 380W
    Video: Gigabyte 6600 256M (GV-N66256DP)
    Sound:  CreativeLab SB Audigy 2 ZS Gamer
    Thanks
    Alex

    Hi,
    My PSU is Antec True3808 (5V/35A 12V/18A 3.3V/28A)
    I forgot to mention before.  The CPU is AMD Athlon 64 2800+.
    Also, I had enough of installation for now.  I pulled the new 6600 and put the old 5700LE back in.  Now, I installed everything without a problem.
    Could it be not compatible?  PSU issue?  Or something else?
    Any suggestion?
    I appreciate any help.
    Alex

  • Any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor ?

    any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor and his card is connected through the DVI cable without problems ?

    yup, no problems here! connected to a 19" AGNeovo F-419 TFT LCD, using DVI cable. nice picture!

  • K8N Neo-MS-7030+3000 !No boot SPD

    Why won't this board boot with SPD timings on CorsairXL=(Low volt/tight SPD timings) ?
    Let alone boot over 225HTT--->K8N Neo-MS-7030+3000 !No >225+boot
    And there's more than one thread about this, but no solutions being brought forward.

    I dunno about you, but my BH5 will definitely not do 225MHz on 2-2-2-11 timings with the voltages available to this board. You need to isolate the memory from the CPU to determine which one is the culprit. Drop the RAM divider to "133MHz" (i.e. 3:2 ratio) and crank up the HTT (don't forget to change the HT multiplier to 3x). Now test your RAM buy lowering the CPU multiplier to 7x, setting RAM to "200MHz" (i.e. 1:1 ratio), and increase HTT.
    Oh and if you think your pissy attitude is gonna convince others to help you, think again. Maybe if you tried asking nicely instead of sounding like the world owes you a favour, you might've gotten more replies. Of course, now when you experience the same problem on your new Abit board, I'll expect you to show up at the Abit forums whining and bitching there as well, and just like here they'll ignore you because you can't be bothered to word your posts more carefully and more helpfully (like specifying what settings you've already tried). If you can't even spend the time to give everybody the necessary info, don't expect anyone to help you.
    Classic case of PEBKAC.

  • HELP! K8n Neo Platinum (7030) 2.10 Bios -- CPU overheating

    AAAAAH Someone help me!!
    I just downloaded the MSI Liveupdate program, and Updated my Bios from 1.7 to 2.10.
    With Bios version 1.7 I was running my AMD 64 3200+ at solid 35-55 degrees (min to max)
    Now with this new bios version, my CPU runs at 57-72 degrees (min-max) !!!!!!
    HOLY CRAP -- this processor is not even rated to run at temperatures above 70 degrees Celsius!!
    I'm in the danger zone as I type out this message to you guys, and I'm worried I'll reduce the shelf life of my processor.
    CAN ANYONE HELP ME??? I've tried changing All the settings around in the bios, I've even set the processor down to about 1.8 ghz, and it's still running at temperatures above 55 degrees...
    From what I understand there is no way of removing a bios flash, is that correct? Am I stuck with this crappy 2.10 bios flash?
    What can I do? Please dear god... help me.

    Ok answers to your questions:
    My board is a MSI-7030 (K8N Neo Platinum) And Originally I flashed the bios from 1.7 to 2.1 Via Liveupdate (MSI Live Monitor & Live Update 3)
    - I read your faq on how to manually rollback the bios, and i rolled back to version 1.9 (which I had never had before)
    and that did not seem to work. My temp is still at 68-72 C -- even in the bios.
    A few questions I need to ask now:
    1) Is the next step is to revert back to 1.8? Then if that doesn't work, back to my original 1.7?
     -- also, 2) Who is Syar? Where can I get his version of the bios? --
    Finally: 3) What is the CMOS battery?  I know what the Jumper is, but I'm not sure what the battery is...
    Is that the circular battery that's next to the BIOS Jumper? (maybe a picture would help..)
    Thanks for all the responses so far! you guys are saving me from having a major emotional breakdown here.. I thought I was going to have to buy a new mobo.
    I'll check back here on the forums in a few hours to see if anyone has responded,
    (p.s. TY SO MUCH for caring enough to help a fellow hardware enthusiast!!!  )

  • K8N Neo MS-7030 Rev 1 - Promise Ultra133 TX2 Help

    I recently installed the MS-7030 board, for some reason if I use my Promise Ultra133 TX2 controllers the board will not POST if the controllers have a HD connected to them. Before upgrading these cards and HD's worked fine so I know these are good. Any ideas as to why this configuration does not work?
    Are there any other recommended IDE controllers for the MS-7030 board?
    Thanks for the help in advance!

    Here are the system specs
    MSI K8N Neo Platinum MS-7030
    Athlon64 3400+
    Samsung CL2.5 DDR PC3200 (x3)
    Nvidia MX400 AGP Video
    IBM IDE 30GB HD (x2) RAID0
    Sony CD-ROM
    Dynex 350 Watt Power Supply (Best Buy Brand)
    Promise Ultra133 TX2 IDE Controller (x2)
    Samsung 120GB HD (x3) software RAID5
    1.44 Floppy
    At first glance it appreaed as if my power supply might have been underpowered just as you are thinking. So the first thing I did was to swap the 350watt power supply out for a beefier 500watt version. The 500 watt version is a CompUSA brand. I realize it's not an Enermax or Antec but the 500watt power supply has been used before to power a server that had the exact setup above except it had dual athlon mp's plus external HD bays for the RAID5 set. Currently the 500watt power supply powers my gaming rig which consists of:
    MSI K8N Neo2 Platinum
    Athlon64 3000+
    Radeon 9800 XT
    Samsung CL2.5 1GB PC3200 (x2)
    WD Raptor 36GB (x2) RAID0
    Lite-ON DVD ROM
    Pioneer 16X DVD+-RW
    1.44 Floppy
    Judging by the fact that the 500 watt power supply can power the above rig I surmise the issue is not a power supply issue. Also I flashed the bios to the latest and greatest version supplied by MSI which I believe was v1.9. As for the boot order I did check it and it is set to boot correctly from the primary HD. Thanks for the help.

  • K8N Neo Platinum 7030 Problem

    I have a K8N Neo Platinum and as of the past week my computer has been acting really strange.  I has had random lockups that at first made me think it was the video card.  That wasn't the case.  I tried a different power supply and that didnt help.  So I decided to take everything out of my computer.  I had everything unplugged from the motherboard power, ide cables, etc.  I noticed as I was taking everything out that I felt like I was getting shocked by my case but I don't know how because I had no power supply in my computer and all the cards, processor, memory were taken out.  When I took the mb out i didn't feel the shock anymore, but when I put the mb back in the case and hooked the power supply back up to it I did.  I even vacuumed out the case totally removing all dust and dirt.  Am I missing something here?  HELP lol

    thanks for replying glenn after 2 days of hunting i can now say
    90% sure the whining is from the powersupply
    using my advanced hearing device i found a flaw in its design.  before i would put it near psu but not hear the whine from there. well it occured to me to tilt it ever so slightly (tip from radio broacasting in college) to let the noise in but block any wind from crossing the end of my tube. and ch ching finally from the rear of the psu is where it is loudest. 
    ive owned 3 enermax and theyve been the best psu ive ever owned.  but this weekend im swap it with my other and see if it still happens. it will probably take 2 hours total do it which is why ive put it off this long. ive tried bumping the wires around even though its a full size chieftech with all my watercooling gear its almost impossible to not have the wires overlap each other at least a few times. but with the moving around i did do it didnt help. 

  • MSI K8n Neo Platinium ( 7030 NMS ) anb BIOS.

    I have a MSI K8n Platinium ( 7030nms )
    Recently, I update the bios to the last version, with this BIOS, at more of 220 Mhz to FSB  ( A64 3000@2200 Mhz ) system don't start, before the update the system runs perfectly at 2350 Mhz ( 235 FSB ) and unestable at  2400 Mhz ( 240 FSB).
    ¿ What it's the problem with new bios ?
    I tryed flash a old version, the 1.2 or 1.3, but isn't possible, the flash program tell me of a bios protection, and jumper balblabla....
    Please help me !  

    There are plenty of beta verions I'm currently running 1.5B6 very stable.
    you can see them on
    Syar2003's Bios Link
    Quote
    What BIOS ver. it's recomended ?
    Try this thread to see feedback K8N Neo and Neo2 Bios Collection. *Updated 140 official for Neo2
    luck

  • [SOLVED] makepkg error: Why is it looking for '.part' files?

    I've been seeing the following problem with every package I try to build with makepkg.  The download works, but then makepkg complains that it can't find the source file:
    ==> Making package: android-sdk r20-2 (Fri Jun 29 11:01:35 CDT 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Downloading android-sdk_r20-linux.tgz...
    % Total % Received % Xferd Average Speed Time Time Time Current
    Dload Upload Total Spent Left Speed
    100 78.7M 100 78.7M 0 0 1640k 0 0:00:49 0:00:49 --:--:-- 2166k
    mv: cannot stat ‘/usr/local/src/android-sdk_r20-linux.tgz.part’: No such file or directory
    ==> ERROR: Failure while downloading android-sdk_r20-linux.tgz
    Aborting...
    Why is it looking for the .part file, instead of the .tgz file?  When I run makepkg again, without doing anything in between, it finds the .tgz file and goes on its merry way.
    I'm using curl, and I haven't tried wget.  Judging by my unscientific sample of forum posts it looks like wget is the de facto standard, so this may not be on anyone else's radar.
    Here's my makepkg.conf:
    # /etc/makepkg.conf
    # SOURCE ACQUISITION
    #-- The download utilities that makepkg should use to acquire sources
    # Format: 'protocol::agent'
    DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
    'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
    'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
    'rsync::/usr/bin/rsync -z %u %o'
    'scp::/usr/bin/scp -C %u %o')
    # Other common tools:
    # /usr/bin/snarf
    # /usr/bin/lftpget -c
    # /usr/bin/wget
    # ARCHITECTURE, COMPILE FLAGS
    CARCH="x86_64"
    CHOST="x86_64-unknown-linux-gnu"
    #-- Compiler and Linker Flags
    # -march (or -mcpu) builds exclusively for an architecture
    # -mtune optimizes for an architecture, but builds for whole processor family
    CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
    CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
    LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
    #-- Make Flags: change this for DistCC/SMP systems
    MAKEFLAGS="-j4"
    # BUILD ENVIRONMENT
    # Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign)
    # A negated environment option will do the opposite of the comments below.
    #-- fakeroot: Allow building packages as a non-root user
    #-- distcc: Use the Distributed C/C++/ObjC compiler
    #-- color: Colorize output messages
    #-- ccache: Use ccache to cache compilation
    #-- check: Run the check() function if present in the PKGBUILD
    #-- sign: Generate PGP signature file
    BUILDENV=(fakeroot !distcc color !ccache check !sign)
    #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
    #-- specify a space-delimited list of hosts running in the DistCC cluster.
    #DISTCC_HOSTS=""
    #-- Specify a directory for package building.
    #BUILDDIR=/tmp/makepkg
    # GLOBAL PACKAGE OPTIONS
    # These are default values for the options=() settings
    # Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx)
    # A negated option will do the opposite of the comments below.
    #-- strip: Strip symbols from binaries/libraries
    #-- docs: Save doc directories specified by DOC_DIRS
    #-- libtool: Leave libtool (.la) files in packages
    #-- emptydirs: Leave empty directories in packages
    #-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
    #-- purge: Remove files specified by PURGE_TARGETS
    #-- upx: Compress binary executable files using UPX
    OPTIONS=(strip docs !libtool emptydirs zipman purge !upx)
    #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
    INTEGRITY_CHECK=(md5)
    #-- Options to be used when stripping binaries. See `man strip' for details.
    STRIP_BINARIES="--strip-all"
    #-- Options to be used when stripping shared libraries. See `man strip' for details.
    STRIP_SHARED="--strip-unneeded"
    #-- Options to be used when stripping static libraries. See `man strip' for details.
    STRIP_STATIC="--strip-debug"
    #-- Manual (man and info) directories to compress (if zipman is specified)
    MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
    #-- Doc directories to remove (if !docs is specified)
    DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
    #-- Files to be removed from all packages (if purge is specified)
    PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
    # PACKAGE OUTPUT
    # Default: put built package and cached source in build directory
    #-- Destination: specify a fixed directory where all packages will be placed
    PKGDEST=/usr/local/pkgs
    #-- Source cache: specify a fixed directory where source files will be cached
    SRCDEST=/usr/local/src
    #-- Source packages: specify a fixed directory where all src packages will be placed
    #SRCPKGDEST=/home/srcpackages
    #-- Packager: name/email of the person or organization building packages
    PACKAGER="Whitney Marshall <[email protected]>"
    #-- Specify a key to use for package signing
    GPGKEY="E4FB694E"
    # EXTENSION DEFAULTS
    # WARNING: Do NOT modify these variables unless you know what you are
    # doing.
    PKGEXT='.pkg.tar.xz'
    SRCEXT='.src.tar.gz'
    # vim: set ft=sh ts=2 sw=2 et:
    Last edited by wmarshall (2012-07-02 15:39:16)

    It looks like this code is the culprit.  I don't have time to dig into it right now, but presumably this works with wget.  I would have thought any cmdline downloader would manage renaming the .part file itself...?
    makepkg, lines 395-417 (pacman 4.0.3-2):
    395 # replace %o by the temporary dlfile if it exists
    396 if [[ $dlcmd = *%o* ]]; then
    397 dlcmd=${dlcmd//\%o/\"$file.part\"}
    398 dlfile="$file.part"
    399 fi
    414 # rename the temporary download file to the final destination
    415 if [[ $dlfile != "$file" ]]; then
    416 mv -f "$SRCDEST/$dlfile" "$SRCDEST/$file"
    417 fi

  • Looking for part no. for M93z frame stand

    Hi Everyone,
    I bought a new machine with product id 10AECTO1WW (23" non-touch M93Z all-in-one machine) from a lenovo warehouse sale. This came without any stand (this was known to me). Now i am looking for a frame stand, but can't locate its part number. Also if it is possible to order this from lenovo.
    Thanks

    Actually i am looking for monitor stand instead. Thanks

  • Houston based Oilfield company looking for part time help

    i-Tec Well Solutions, a Houston Texas based company, is looking for someone to set up existing pressure transducers and load cells to work with existing Labview Signal Express software.  This should be a short term contract job, which would include:
    Wiring up all equipment for easy and frequent use.
    Installing software  on a dedicated shop computer.
    Programing the software for collecting pressure data and force data.
    Recommendations for purchasing additional equipment.
    Recommendations for purchasing additional equipment to equip existing analog pressure pumps.
    Design and build a stand-a-lone shop test cart for mounting/storing all essential equipment.
    If interested, please contact Dennis @ [email protected]
    i-TEC Well Solutions
    5535 Brystone Drive
    Houston, TX 77041
    web: www.i-tec.no
    email: [email protected]

    Hello Joe:
    Do you need someone on-site? I could offer you remote work with the best pool of designers and DPS experts? We have been using it since the initial publi release in 2011
    Email me if you are interested => [email protected]

  • Experienced LabVIEW Engineer looks for part time projects

    Swedish LabVIEW Engineer with over 5 years of experience. Speciallity: analysis and Vision applications.
    Looks for smaller part time projects (that can be performed at distance).

    Hi,
    I have 6 years of experiences in labview application.I would like to develop the code through the internet.
    Kindly let me know if the openings still available. 

Maybe you are looking for