K8n neo nf3 250: best bios for OC.

Hi.
What is the best bios for overclocking on msi k8n neo fsr/platinum. I use bios 1,47 now, but i think it is playing games with me.
I have no problem running my cpu at 10/255/2550, but my Ocz 3500 EB wont follow that long on 1:1. So i tried running this at 9/280/2520 and my memory running at 5/6. But my cpu wont get totally stabil here...
My temperatures here is 32c idle and 48c load.
Is there a better bios for OC?

Try 1.42
Find it here K8N Neo Bios Collection.

Similar Messages

  • MSI k8n NEO NF3 250 Platinum Problem

    Wacked all my gear in there.. bare minimum, Msi K8N Platinum NF3 250gb, amd 64 newcastle, matrox parhelia 128 retail, samsung spinpoint 160 ata133 and 1.5gb 2700 ddr and it wont boot, i get as far as the old windows "safe mode, safe with promps... windows normally screen" then wen i hit it it goes back to the platinum splash screen, wen i go to boot in safe it stops dead at trying to load viaagp1.sys..
    any suggestions.. and im not going to do anything like reformat as i need some of the stuff on teh hdd.. any help would be great
    i do alologise if this is in the wrong section. 

    A full format is your best option.... A repair MIGHT do the job, but I wouldn't count on it's stability / performance afterwards.
    If you really need your old data, "resurrect" your old rig outside it's case & back up your stuff - then do the Big Wipe!

  • Best bios for p965 neo v.1x

    what best bios for p965 neo v.1x?
    proc dual core 2,8 nvdia ge force 8400 GS,2x 1 gga ddr2 pc 800
    windows 7 ultimate 32 bit
    thanks for reply

    I have 1.9 right now...i just ask for best perfomance for my pc...what recommended bios for the best perfomance and for gaming thanks

  • Best Bios for Geil Rams

    I have 2x Geil Ultra PC3200 2-3-3-6 sticks. What's the best Bios for that memory??? (i mean OC)

    Perhaps telling us what kind of motherboard you have would help .
    Create a hw signature as noted in the forum rules.

  • K8N Neo2 Best bios for Opteron 146?

    Hi guys,
    Forgive the rather basic question, but I haven't been around for a long time and things have moved on a piece.
    I am running an old Athlon 64 3200+ in my Neo2, with a very old bios.  (See my sig below for current specs.)  Heck, if it works, don't mess with it!  But tomorrow a new Opteron 146 arrives, so I guess I will need to update the bios.
    So what's the recommendation for the best bios to go for?
    Will I be OK in "jumping" so many bios versions, or would it be best to do it incrementally?
    And finally, I remember some issues about Windows not booting after upgrading the bios.  Has this been resolved, or will I need to do a clean Windows install as well?  I really *do not* want to have to do a clean install.  That would be horrendous.
    Thanks for any advice.
    Cheers
    Chippy

    Quote from: bejon2000 on 02-February-06, 15:13:05
    9x290 (2,6Ghz) is a very good OC, passing prime95 with both core´s tested.
    I can't complain about a 45% OC... Started with 1.8Ghz.
    Quote from: bejon2000 on 02-February-06, 15:13:05
    I "only" manage 10x270 ( 2,7Ghz) primestable so far with my DFI and X2 3800+, since one core gets unstable at 2.8Ghz and beyond.
    ( But I´m still happy, running Pi at 33sec with 3-3-3-7 RAM / Sandra cpu benchmark gives 24.067mips and Sandra mem.benchmark 6.733mbs )
    What kind of voltages are you running to get your OC?
    I think that I'm starting to reach the limit of what my Neo2 Plat can supply to the Opty - In BIOS, I specified 1.5v+5% and it gives me only 1.45v or so....

  • Best Bios for Msi neo ver 2 series

    i buy a new motherboard last week, im looking forward for a new bios for it any suggestion?

    If I were you I won't update the BIOS until it causes a problem. Gd luck

  • No sound on K8N Neo after upgrading to BIOS 1.9

    Hi,
    I cannot get the internal sound to work through the digital outputs (SPDIF or optical) after upgrading to BIOS 1.9. The analog aoutputs work fine as did the digital prior to upgrading to 1.9 (don't remember exactly but I think I had 1.7 before).
    I have connected my speakers (with internal DA converters) with both SPDIF and optical cables.
    I have tried every combination of speaker settings and outputs in the Realtek audio manager to no avail.
    As a sidenote my other, external, soundcard (M-box MobilePre works fine) connected to my speakers.
    The mobo is a K8n Neo (7030) and audio drivers latest Realtek AC97.
    What can I do?
    Regards,
    Henkan

    Henkan,
    Welcome to our forum.
    What method did you use to update to v1.9?
    From what you posted the BIOS update caused your sound problem, so you need to either re-flash BIOS 1.9 or go back to the previous one that worked for you.
    Read these thread about flashing BIOS:
    1- using WINflash https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
    2- using DOS https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
    DO NOT USE LIVE UPDATE - DO NOT USE LIVE UPDATE
    Good luck,

  • MSI MS 7100 K8N Neo 4 Diamond need bios configuration help

    Hello,
    i have a MSI MS 7100 K8N Neo 4 Diamond mainboard, Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) and 1GB Ram and i would like to install two SATA 2 HDD (160GB) seperatlely one of them i would like to split it into two partitions.
    On the first drive without any partition i would like to install OS (W2003 Server 32 Bit edition).
    it will be a Domain and file Server for afew users.
    i have make an experience but its don't work what i like the transfer rate is to high (10 GB abut 20 Minutes) i think i make some errors on the beginning.
    1.) what should i do on bios site and wich controller should i use nvidia or silicon controller?
    2.) wich settings are very important
    3.) is ther any problem to install W2003 32 bit version ?
    it will be glad to get some usefull information.

    Hello !!
    The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
    If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
    Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
    Good Luck
    Greetz MurdoK

  • LiveUpdate broke the bios on a MSI k8n neo v2.0, need bios and recovery files.

    LiveUpdate broke the bios on a MSI k8n neo v2.0, it need bios and recovery files. I do not know the serial number. The ERP is 070.  Its a "k8n neo v2.0" "ms - 7030 ver: 20c" mainboard.  I don't know the previous bios version.  The computer prompts for a recovery disk during an AWARD BootBlock BIOS v1.0 initialization.
    Thank You.

    Here it is
    [K8N Neo V2.0 series ==> 601-7030-070/080, BIOS 5.xx]
    Sign On: K8N Neo V2.0 Series W7030NMS V5.4 031506 14:55:37

  • MSI MS 7100 K8N Neo 4 Diamond need bios configuration help very urgent

    Hello every body i need very urgent help,
    i need help on above mainboard bios conf. i will attach two seperate hdd (120 GB sata II) and i will setup W2003 standart 32bit ed.
    if possible i won't use any raid configurations, but i need speed
    how should i conf. bios and which controller shouşd i use silicon or nvidia or how and wich has to be used.
    corecction about my configuration
    Mainboard   MSI MS 7100 K8N Neo 4 Diamond (NF4 SLI,GLAN,SATA)
    CPU      AMD Athlon 64 X2 3800+ (2.0GHz,1024K Cache,S939) BOX
    Ram      CORSAIR Value Select DDR400 1024MB Kit (2x512MB)
    Hdd      SAMSUNG 120GB 7200RPM 8MB SATAII     (2x120GB)
    Graphic Card         SAPPHIRE 256MB ATI Radeon X1600 PRO (PCI-E) AVIVO
    Case                      ENLIGHT 7247 400W

    Hello !!
    The Bios configuration depends on many factors.....but we do not know anything about your configuration. ( CPU, RAM, Powersupply.....)
    If you need HDD Speed, RAID 0 will be a good Option and you should consider it.
    Both Controllers, Silicon Image & nvidia, have the same speed. But i think you can not attach Optical drives to the Silicon Image Controller. ( if someone has other experiance please post )
    Good Luck
    Greetz MurdoK

  • K8N Neo Platinum: Will future BIOS enhance GeForce performence boost?

    I read that the Nforce3 250GB reference boards showed a performance boost when paired with a GeForce FX video card. The K8N Neo Platinum does not take advantage of this now, but will it ever in the future?

    Don't know if you have tried this things but heres my list of things .
    BIOS:
    -First load bios optimized defaults , then ..
    -Set the cpu vcore voltage up by + 0.025v (don't use auto)
    -Increase the memory voltage vdimm to 2.7v (or the vendors max defined voltage)
    -Disable fsb spread spectrum
    -Disable dynamic overclocking
    -Disable cool n quiet
    -Change the multiplier from startup to 11
    -Turn off auto on memory timings in cell menu/dram and set all values manually
     and the max mem frequency to 200.
    -Turn off AGP fatwrites
    CASE:
    USB connectors
    -Disconnect case front usb from usb header on motherboard.
    -Disconnect the d-bracket from usb header on motherboard.
    -Change the red MSI ide cable if used.
    -Check all stand offs/spacers under the motherboard .
    -If using PS2 kb and mouse some board have mislabeled color code
     making people connect mouse in kb and vice versa .
     Correct is keyboard in the bottom mouse top.
    STABILITY TEST:
    Outside windows and windows drivers:
    Download and test with memtest86 v 3.1
    http://www.memtest.com
    Inside windows:
    Test stability with prime95 and/or hotcputester

  • K8n neo platinum highest voltage bios

    Hello , i'm new here, just got a k8n neo platinum board recently was wondering which bios version i should use as the current one is 1.5 from teh msi website but i'm limited to 1.7 vcore, i was wondering if theres any other bios that would let me get higher than 1.7 vcore?? thanks~~

    haha i'm trying to overclock my athlon 64 3200+ clawhammer from 2.0 ghz to 2.4 ghz......its only stable up to 2.39 ghz at 1.7 at 2.4 i can get into windows but prime 95 gives me errors so ima try to get it stable by adding more volts unfortunately i'm limited by my board or should i say bios.....so any bios meaning 1.4 should give me 1.8 volts??? what aobut the 1.56 betas?   i'm oc'd on air cooling a zalman cnps 7000cu

  • Corecenter 1.7.6 and K8N Neo Platinum 1.6 bios

    Hi
    Just updated from Corecenter 1.7.3 to 1.7.6, and K8N Neo Platinum bios 1.5 to 1.6.
    First thing I noticed, is my reported CPU temps are really low.
    Before:
    Idle = 34c
    Load = 55c
    Now:
    Idle = 25c
    Load =38c
    This cant be right...  Anybody else experience this?
    Cheers
    Jooppy

    Yeah, nearly everyone, apparently.

  • [AMD] Whats the best BIOS for overclocking on the K8N Neo-2 Platinum

    any one know which one is best.
    thanks

    I have no idea what biosversion that is the best in general for OC the K8N Neo2 P.
    I use 1.5 and it´s the only version I´ve used.
    I believe not many people have tested OC potential for all 6 versions 1.0 - 1.5.
    ( even more if you include the beta´s).
    I would say OC potential depends more of what hardware you are going to use.
    Good RAM and a good CPU stepping are in most cases more important then biosversions.

  • Best BIOS for the job? (K8N Neo4f)

    I have, as stated in the subject, a K8N Neo4F mobo and an AMD Venice core CPU.  I have read that there are BIOS specifically tailored for Venice core, and some are not.  Which version of BIOS should I be using to optimize my system?  Honestly, as I am not at home, I'm not even sure which I have, but I believe it is 1.6.  I do seem to be hitting the same walls that I have read other people hit without a BIOS modded for Venice core.  Is there any truth to this?  I am still rather new to all of this, as this is my first build, would it not be advisable to start messing with this stuff? 
    Thanks for any help.

    Is there any problem with your hardware? If you don't have any problems do not flashed it as it might cause you problem unless it has a problem then you have no choice to flashed it. Many ppl used Ver 1.9 while other's don't. You may look into this forums where you have the same spec's of yours.See from my sig as it might help you how to flashed the bios. Gd luck.

Maybe you are looking for

  • Read lines of a text file, From bottom to top

    read the last row first, from bottom to top, how to do it? Thanks for help

  • Getting the value of variable in a bean

    hi I have method in my class and I'm passing some values in it. example: public static boolean authenticate( String name, String passwd) //declare my variable boolean authorized = false; //do processing and set my variable if(name.equals("") || passw

  • Acrobat x word 2013

    Hi I wonder if someone can help i am pulling my hair out. i have acrobat x standard and it will not integrate with office 2013. it does not appear as a comm addin in word. i have removed it.. reinstalled it download it from the website downloaded the

  • Info Broadcasting web template without logon

    Hi, i want to display a web template automatically when pc boots up but do not want to have the users log on to BW. Does anyone have any insights as to how to do this ? cheers TrevJ

  • Ipod cant turn on

    ok well im having a problem that most ppl have had except ive tried a ghle bunc of crap and nothing works... i plug it into my comp and it stays dead....i heald all buttens 1 at a time and all at once(yes my key lock was off) previously this day it w