K8n neo plat and geforce 6800 gt

anyone have this combo? does it run fine? i'm having some trouble with my graphics card freezing in games after a little while and i read of a problem with the 6800 and nforce 3 chipsets, where turning off fast writes sovles the problem.

Quote from: oldfartjc on 17-August-05, 12:57:00
Boy there are a lot of threads about this. I know I've started one here before. As I have stated in other forums and in this one, I have tried everything and I always get pauses that last 8 to 10 sec. sometimes, or stuttering if you want to call it that. I have used all drivers and the only one that allows me to play D3D games at all are 66.93's. Being a computer tech. for almost 41 years, this frustrates me to no end since we are not getting any nVidia support on this. I'm tired of hearing about turning on/off fast writes, PCI latency, rivatuner, etc. etc. etc. None of them work and are all attempted work arounds to an nVidia problem which they need to address. I am getting very close to ordering an ASUS AV8 Deluxe which I wish I had ordered over 2 months ago when I built this system. The sad part about all this is my machine runs great except for D3D games which also used to work great when I had this same BFG 6800 GT installed in my P4 2.8 GHz system. I'm tired of all this work around B.S., I spend all day working on computers and when I come home I want to play not troubleshoot a problem which is nVidia's problem. Get your act together nVidia as you are pissing a lot of us off. Hello VIA and maybe even ATI. There are so many pages in other forums about this you wouldn't believe it.
Yeah, I've also tried a bunch of stuff over the last year, read countless messageboard threads, and even made some of my own. I guess the problem never really went away. Next week when I have some more time I'm going to do some more troubleshooting and narrow down any outside factors. OpenGL games have always performed absolutely great for me. (I built the machine with doom3 in mind and it doesn't dissapoint there). Even though the performance seemed good, Half-Life2 did give me some problems with the studdering. I thought I fixed it (and thoroughly tested it) by disabling fastwrites in the bios. I'll have to check again because this problem is popping up in other DirectX games now. I just downloaded 3DMark05 and scored a 4,929

Similar Messages

Msi k8n neo plat and microsoft ie

getting my msi k8n neo plat board running satisfactory , except for one problem . when i got to amdmb.com, i start surfing the site, and after a minute or 2, i get a microsoft ie error, send the error report to microsoft, and then ie closes. what is the problem , is it with amdmb.com site? its the only site that this problem with ie is present, all other sites i don,t have this problem

just tryed using the browser firefox, and it works great. its just ie that doesn,t work on amd.mb, and only that site. wierd problem, never experienced anything like it before. had run a short memtest , no errors. the 6800gt , msi k8n neo plat and amd 64 3400 work great. get some super madonion benchmarks-all default-1024 x 768 32bit- 22,755. i was hoping for 22,000, but exceeded my expectations. can get into the 23,000 + with overclocking the 6800gt, have had it overclocked at gpu-412, memory 1.12. not sure how much more you can increase the numbers, thinking my gpu is close to the limit at 412.had a problem with windvd, it ended up being a configuration in windvd- had to enable hardware acceleration , bingo- worked great after that. got my corsair xms pc 3200 to work at 6-3-3-2 timings. still getting to know the board, there is definately a learning curve to be delt with on this board, but i am getting it to work better by the day.

Msi k8n neo plat and audio problem

got me a msi k8n neo plat, great board but have a few minor problems that i have noticed. one is the audio problem i have- when i listen to winamp, and surf, i will loose my winamp connection surfing, and then have to start winamp. is this a bios thing, or nvidia platform or chipset problem?

Hi
Thats the Nvidea board, this is the via board forum. You want forum below this one, as they will be able to help better.
good luck
jocko

Msi k8n neo plat and 3dmark03

with my msi k8n neo plat , bfg 6800gt, and amd 64 3400 clawhammer- i get 11,114 in 3dmark03. seems like i should be getting a higher score-any suggestions.

You appear to have misread my post, read carefully, I said "at clock speeds" not "at stock speeds" which I think is where u misunderstood. I know it's overclocked, but who isn't going to if there is so much headroom? With coolbits you can have higher speeds when running 2d or 3d applications to keep temps low and for longevity of the card.

Msi k8n neo plat and evga geforce 6800gt

hey guys,
i got a MSI K8N NEO Platinum
athlon 64 3400+
1 gb ddr400 ram
400 watt psu
sound blaster audigy 2 value
evga geforce 6800gt 256 agp
and i get this problem, for example when playing farcry at full settings, after a few mins the screen either goes black (no signal) or multi coloured blocks then black and the sound stutters in the background.anyone knows anything abt this??
thanks

https://forum-en.msi.com/index.php?PHPSESSID=28e8b34c11c189f3cf4fd87517f09849&topic=76872.msg541977#msg541977
check this out m8, could be somerthing to do with it.
Also make sure you got latest drivers etc etc.
Try disabling the Nvidia/ati speed up setting in bios. hit shift + f2 alt + f3 I think in bios - brings up these options

K8N NEO PLAT and value ram?

I have been searching this forum for over an hour to find which ram is good with the K8N NEO 4 PLAT. I am going to buy this board and an amd.64 3200. I would like to know which of the value rams work well with this. I will buy two sticks of 512 pc3200. Thanks.

I have the Kingston value ram runnin in my system with the a64 3200+ and it runs great. Only thing is when I run cpu-z it says that the ram is xerox. That is the one problem with value ram is that you never know who the chipmaker is goin to be from batch to batch (this is according to Kingstons webiste, they don't say that verbatim but it's the general gist of things)

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

Poor SATA Performance out of K8n Neo Plat and Raptor drive

I have a k8N Neo platinum with a new Raptor drive. Is there any reason why, when I set the command queueing option for the drive, my speed test under the device manager for that channel says I am getting a normal speed of 5 and a burst of 5.5? I should be getting 50+ with this drive.
Any thoughts? I have all the latest drivers.

kweckstrom - the reason is this:
There is currently no hardware support for NCQ on Nforce 3 boards - NVidia have only just managed to add it for the NForce4 boards as you know which aint available as yet.
NCQ is running in software mode - hence the reduction of performance - I have the same problem - its a case of deciding if you really need it or not - if you do allot of multi-tasking then its worthwhile otherwise if like me you just game - then its not required.

MSI K8N Neo Plat and 6800 Ultra

I just got a BFG 6800 Ultra from a friend yesterday. Worked great for him the whole time he had it. I just put in a new 550 watt PSU because I read it requires a lot of power. Put it in, fan turns on, card seems to get power just fine. Just loading up and going through BIOS is like a matrix, everything is jumbled around and impossible to read. Windows will not boot, get a black screen. I can run in safe mode with a slightly messed up background. Under settings it does not detect any kind of card, but under device manager it is listed, and I did install drivers. Not sure what the problem could be, I messed around with what I could see in BIOS, turned off fast write and such. Any ideas? Thanks.

If you previously had an ATI card you will need to totally remove the old drivers & it's a good idea to replace them with newer versions regardless.
Simply uninstalling usually isn't enough, because there's always "leftovers". There's a free utility called Driver Cleaner (Google for it) that will remove all traces of the old drivers.
Also, if you are running a Neo 2 Platinum (AGP graphics) there's some other things to be aware of as far as BIOS settings.
- Disable ATI/Nvidia Speedup. This tries to OC the bejeebus out of your vid card & usually with bad results.
- Disable Fastwrites as well. This is a known NF3 chipset/6800 issue. One would think that Nvidia parts would "play nice" together - Go figure.

K8N Neo Plat SM Bus Controller Problems

Hi, I just did a recent build witht the K8N Neo Plat and am having some problems.
My original build kept getting corrupt files from any self extractor that did a self verify. I could install windows and the MSI NForce Drivers but many files got corrupted. I finally figured out it was Bad Ram and replaced the PC 3200 I Was using with a stick of PC 2700 I had lying around. I installed windows with no problems and all of the windows updates(which were where I was getting corrupt files). But then when I installed the NForce3 Drivers from the MSI Cd I get blue screen of death, which I did not recieve with the bad ram. I then revert to last known good setting and can install of of the NForce3 drivers except for SM Bus Controller. I have tried using the NForce3 Drivers from the MSI CD and a download version. Both won't install, it still shows up with an exclamation point next to it in device manager. I have tried choosing the driver directly, but I get an accessed denied message. The only problem is when SM Bus won't install, I cant run my new 6800 GT at AGP 8X. It stays stuck in PCI mode.
Also I see a lot of talk about CPU Temps reported by BIOS. I am using the 1.1 Bios, and it shows the CPU running at 65-70C. Core Center shows this also. Is this just a misreported temp? Im using a 3400+ CLawhammer CG Revision with a Zalman 7000 ALCu with Arctic SIlver 5, the HSF seems to be screwed down completely, but the temp reading still makes me nervous.
Thanks for any help.

apply minimal heat paste
clamp sink down switch machine on
the prob is not the heat the prob is the chip clocking 8ghz
the sink and fan work really well
the bios is version 1.5 public
i'm trying to back flash it but i need version 1.1 .1.2. 1.3 and the prog to fash it
and an explanation (it's my first time lol)

Overclocking msi k8n neo plat

trying to overclock my msi k8n neo plat and run mad 2001
hardware - amd 64 3400
bfg 6800gt
corsair pc3200
i go into bios and set ram at 400mhz, set agp at 67 mhz. then open center and enter 210 mhz fsb. when i start madonion, it freezes. is it my memory?

Could be a ram incompatibility issue. I have some OCZ pc3500 EL which is great in my other systems, but doesn't work in the Neo without bluescreens and crashes to desktop. It might also be a power related issue. What type of power supply are you using and what is the amperage on the 12v rail? That seems to be pretty important for this board.

MSI k8N Neo Plat 2...system freeze and crash during h-end gaming...

MSI k8N Neo Plat 2
AMD athlon 64 3800+
Centon 512 MB DDR 3200 x 4
nvidia geforce fx 5700
win xp pro
Creative Audigy 2
Under some graphically intensive situations, during gaming, especially dealing with alot of background visuals, like fire/lava, etc, the system will after a short while of playing either, crash, freeze, reboot, or freeze while a loud screeching nosie emits from my speakers...I have tried updating my graphx card drivers to the most recent and the symptons still persist..Is there something I need to set in BIOS regarding mem timings, I have tried playing around some, but that hasnt worked either...Any help would be greatly appreciated !!!
,

Try raising RAM voltage to 2.7v - 2.8v.
If no go - Run Memtest86 http://www.memtest.org/#downiso
If no go - Try onboard Audio ( disable / remove Audigy2 )

MSI K8N Neo Plat edit. and IDE

Can anybody tell me how many IDE units you can run on this motherboard? I do not want to use raid 0 or 1. I have a KT3 ultra - aru at them moment with 6 single IDE units, but now I need to upgrade.
Thanks for any help.

Hi,
you can connect 4 IDE devices and 4 four sata devices on MSI K8N Neo Plat editition.
If it's not enought you can plug an IDE PCI card....

Success with K8N Neo Plat + ATI 9800Pro?

I'm trying to decide on whether to go with the ATI Radeon 9800 Pro 128MB or the GeForce 6800nu. But I've read a lot of places where people have had problems combining the MSI K8N Neo Platinum and the Radeon 9800 Pro cards together... lots of blue screening or choppiness when playing games like FarCry or other heavy hitters. So that's why I'm considering the GeForce card instead, but I'd really like to stick with the ATI if possible.
So, if you have a combination of that mobo and gfx card, please post the results of your success or problems (and why) along with your system specs.
Thanks in advance!

Since my power upgrade to a Tagan 480W, I haven't had any problems anymore! With the new ATi catalyst 4.9 drivers I reached 6005 3DMarks (2003 build 340) yesterday. Without any OC-ing, I think that's great! Before the Tagan psu I had some drops to 3700 3dmarks, so make sure you get a psu with at least 24amps or more on the +12V rail for this kind of system!
No choppiness in games either, in fact they (Farcry, Colin Mcrae, CoD, Doom3 since 4.9 drvs etc etc) all look great!
I can really recommend the ATi9800Pro 128 MB + MSI Neo plat. + a AMD64 CPU as lons as you buy a decent psu with it! I mean the ATi9800 Pro has a great price / performance these days

Msi k8n neo plat nforce3 250gb : blue screen

hi
just built a amd 64 3400 with msi k8n neo plat: with xfx 256 geforce nvidia graphic n kinston 512 ddr 400.
but for some reason its giving the blue scree with dumping memory msg on the screen.changes the memory but still got the same problem updated the bios to 1.5 still same thing.
any cue with the problem.
thnks

System restore? You need to find out what's causing the problem and you have too many things connected to it to be able to figure out what it is, always start with a basic system - video, primary hard disk, cd + fdd, no more and nothing else connected. Then when something goes wrong along the way you'll have more chance of narrowing it down if the problem appears.
What you'll want to do now is disable/uninstall/unplug any additional non-system-critical components that you have connected to it such as extra usb slots, printers, scanners and anything else. Keyboard, mouse, video with no sound and see if the problem persists. If it does, try another video driver. If it's fixed then reconnect/enable one device and try again until the problem reappears and you can find out what's causing it -- unless you can speed read that message quickly before it shuts down
Now that I think of it, have you set the OS to not automatically reboot on any errors? That might keep the BSOD up there so you can note it down and hopefully point at the problem instead of going through all the above hassle ^^

K8n neo plat and geforce 6800 gt

Similar Messages

Maybe you are looking for