K8N Neo Platinum - No post ... help!

Hey folks,
Refer to this thread for info ... Help ... my pc won't turn on!
I'll start off with the system specs so you'll have an idea of what I'm going to be talking about :
AMD Athlon64 3000+
MSI K8N Neo Platinum
Corsair CMX-512 PC3200
WD 160gb SATA
MSI 5900xt
Antec SmartBlue 350w
So I bought the parts ... 2 months ago. I used it for about 1 month ...ran like a dream. Died ... RMA'ed the motherboard, and a month later, I get it. I assemble the system, doesn't post the first time I turn it on. Shut it off, posts ... attempts to log onto the Windows partition that is on the hard drive i used it with ... gets into Windows logon screen, and crashes. On several occasions, I noticed the system switched off on its on for some reason. Switch off the system, try again, and it crashes. Switch it off (by holding on the case switch, then switching off the power supply). This time, I switch the PS back on again, and the system fans start, but nothing comes on screen, or posts. I noticed on the video card, the fan starts up, but then stops after it realizes that the system hasn't posted (heatsink is cool). I know the video card works because I just pulled it out of my spare system ... and it works just fine. I have no idea what is going on. I don't know what to do. Any help is greatly apprecitated.
Quite frankly, I am rather dissappointed with MSI at the moment. I fork out my hard earned money for a good motherboard, it dies out of the blue for no reason, I RMA it, and a MONTH later, i get a crappy refurb (looks quite used too!). Is there any customer satisfaction involved? I would like to get on the phone and actually talk to some one about this.
Thanks guys!

Just remembered to attach the diagnostic d-bracket. I get red, red, green, red.
Hopefully this'll help.
EDIT: So I cleared the CMOS. I can get the system to POST now. This posting thing is still iffy ... posts sometimes, and decides not to at other times. Only problem is, is a stability problem. I managed to get the system to boot into the WinXP install I had before. Just freezes out of the blue. Also froze when I tried to install a new copy of windows. Freezes on random occasions.   The motherboard I had previously booted on first try, and installed without any problems. It never froze, or crash. Why would this motherboard crash?
Also found that the fan on the v-card does not spin when it is not active. It spins fine when there is something displayed on the monitor.
Bios is V1.4. CPU temp at around 38-40°C. NB temp at around 28-30°C. Temps seem to be normal.

Similar Messages

  • K8N Neo Platinum wont POST - help!

    I decided to flash my bios to the latest version, 1.4, and after it said it was completed and restarted my system would no longer boot. It runs for about 5 seconds then shuts down. I've tried the recovery with a floppy drive but my system doesn't even try to access the drive. I'm guessing I have to get an RMA, but does anyone know how to fix this?

    Quote
    Originally posted by TimKessler
    Quote
    I agree it's probably the PSU but what do we tell him when he spends $140 for an OCZ and still has the same problem?
    I would suggest that he only pay around $85 for a trupower 480, which has been very solid and stable for me.
    Coolmax 500wt is only $56 at Newegg and as 28amps on the 12v. Highly recommended.

  • K8N Neo Platinum, NO POST

    I have 2 known good Athlon 64 3400+ CPUs.
    CPU#1 is a ClawHammer SH7-C0
    CPU#2 is a NewCastle DH7-CG
    The problem is as follows:
    CPU#1 works and is stable on the board, (MSI K8N Neo Platinum, 7030)
    CPU#2 will not POST on the same board, D-Bracket gives all reds except from #3, according to the manual this is 'Initializing Keyboard Controller'.
    And the speaker gives 1 long beep, follow by a pause (Indicating RAM error, RAM is known good, and tried with different sticks too)
    Since CPU#1 worked on the board, i figured CPU#2 must be broked, so i RMA it, and it returned with 'No errors'.
    I have tried most everything known to man:
    Reseat the CPU, RAM, *
    Boot with the board out of the case
    Update bios (Have latest, 1.6)
    Reset bios by JBAT and remove battery
    New and different RAM
    You name it, i've tried it.
    Except for RMA the board, could the board really be broked? It works with the ClawHammer...
    I'm going nuts. 

    I've got the same motherboard running with a Newcastle. The only difference between you Newcastle and Clawhammer would be the level 2 cache. That isn't going to have any effect on the cpu working in your system. You cleared the bios so the bios should automatically detect the level 2 cache on the new cpu. I use bios 1.5 on mine. The 1.6 bios is very new. It is only supposed to effect cpu identification, but with a new bios who knows. Did you try the 1.5 bios that's been out a while and is well tested? I don't believe it's the motherboard or it wouldn't work with the clawhammer. Who tested that Newcastle and said it was good? I wonder if they really tested it in a live system? Bad cpu gets my bet.

  • Help! K8n Neo Platinum wont finish posting

    I have a k8n neo platinum, newcastle 3200, 1gb corsair 2-3-3-6 ram, Westen Digital 200gb sata drive, and an Antec Truepower 430watt psu. Everything starts up correctly, but after about 30 seconds the board just powers down. I can attempt to reset it, but it powers down after about 10 seconds afterwords. After each time, the power light stays blinking but nothing else happens.
    I think this may be related to the wrong newcastle temp readings bug (I was able to power it on long enough to check that my chip temp was 60deg C, but the heatsink was cold). My fan is a Thermaltake Venus 12. I was going to attempt to bios flash it, but I can't even power it on long enough to do that.
    Any help would be extremely useful.

    Actually, it was a folse positive. Seems that my problem was a keyboard problem of all things. After switiching the power connector around, it still just died when I went to use the keyboard. So I switched to a different keyboard.
    I am having another problem though. I'm trying to install an OS (windows xp) and am facing random lockups during the installation. And at times, the keyboard just won't respond in the bios.
    Temps are more or less fine, I think. They were toping at 68 deg C (newcastle temp bug). I'm too scared to update the bios and have it just lock up in the middle.
    With a new keyboard plugged in, the original problem goes away, but if I set the bios to halt on "all errors", instead of the default "all but keyboard", it post hangs with the error message "keyboard is locked out - unlock the key" which may or may not be related. I would really like to be able to use my other keyboard, but that's even worse.
    If anyone could shed some light on the crazy keyboard issues and the random lockups, that would be great. This motherboard is really starting to frustrate me.

  • K8N Neo Platinum not passing POST

    Hello,
    I have just bought an MSI K8N Neo Platinum OEM and it will not pass POST. I have gone through all the items in the Sticky section, but still it won't pass. I don't know what to do.
    Here's the hardware I have hooked up:
    MSI K8N Neo Platinum motherboard (has "MS-7030 VER:1" written on it)
    Athlon 64 3000+ CPU, 512 K L2 Cache (ADA3000AEP4AP)
    Kingston RAM (KVR400X64C3A/512)
    Radeon 7200 graphics card (about 4 years old)
    Seasonic S12 380 PSU
    Thermalright XP-90 heatsink w/ 90mm Nexus fan
    I have hooked up the 24-pin power cable to the 20-pin motherboard slot using the 24-to-20 pin adaptor supplied with the PSU.
    The 12v 4-pin CPU power cable is also plugged in.
    The graphics card is plugged into the AGP slot. There is no other power connection needed.
    I have installed the CPU with a Thermalright XP90 heatsink and a Nexus 90 mm quiet fan.
    I have hooked up the fan to the motherboard C_FAN1 slot.
    I have installed the RAM (Kingston KVR400X64C3A/512) into DIMM slot 1.
    I attached the case fans to the power supply and hooked up the case speaker.
    I have also hooked up the front panel power and reset switches.
    I bought the motherboard OEM, so it did not include a D-bracket. I have built a pseudo-D-bracket using two-colour LEDs and plugged it into the D-bracket slot.
    With this work done, I plugged in the power supply. The power supply has an on/off switch on the back. As soon as I turn on the switch, the computer tries to boot up. All the fans start spinning (power supply, CPU cooler, case fans, video card fan). Nothing appears on the screen. The case speaker emits a long beep, waits about 5 seconds, then beeps again, and continues this pattern forever. The documentation says that this indicates a memory issue.
    My homemade D-bracket shows the following: initially, all the LEDs are red. Then, the LED across JLED1 pins 7 & 8 turns green (with all other LEDs red). I assume that this corresponds to LED 1 being lit, although it really looks like it should be LED 4. Next, the LED across JLED1 pins 5 & 6 turns green (with all other LEDs red). Once again, I assume this corresponds to LED 2 being lit, although it looks like it should be LED 3. I looked this up and the documentation indicates a memory error. To solve the problem, I have tried the following things:
    1. Hitting reset. Same boot sequence.
    2. Clearing the CMOS using the JBAT1 jumper. I left the jumper at "clear data" for about 10 minutes, then switched it back. Same boot sequence as before.
    3. Clearing the CMOS by removing the battery. I left the battery out for 3 minutes, then 30 minutes, then 8 hours. Same boot sequence.
    4. Removing the motherboard from the case. I placed the motherboard on the anti-static bag it came in. Repeated steps 1, 2 and 3. Nothing.
    5. Move the RAM to DIMM slot 2 or 3. Tried steps 1, 2 and 3 again. The boot-up sequence was the same.
    6. Different RAM. I have also tried using OCZ 400 MHz 512MB unbuffered DDR memory (OCZ400512V3). Performed steps 1-5 with identical results.
    7. No RAM. Same boot problem.
    8. No video card. Ditto.
    9. No RAM or video card. Exactly the same as before.
    As far as I can tell, all components are supported. The only item I am very unsure of is the graphics card. I do not have the exact specifications on it. When it is in my other computer, the driver details identify it only as a "Radeon 7200". However, it does have the "golden finger" shown at www.msicomputer.com/support/sup_tshoot.asp#1_3. Even if the video card is not compatible, it seems like the beep codes and D-bracket codes both indicate memory issues.
    The only thing that I have noticed that is weird (other than the fact that the computer won't pass POST) is that when I turn on the power supply, the computer immediately boots up. I don't know whether or not this is normal.
    Lastly, I do not know the current BIOS version. Is it possible that the BIOS is an early version that does not support my memory/CPU/video card? I bought the mobo OEM, so I do not know what BIOS it has loaded. Is there some way I can figure this out without passing POST? This is driving me absolutely insane. 
    Thank you for your help,
    Kyle Renwick

    Make sure the fan you are using for the xp90 is supporting RPM readouts .
    Then try another AGP gfx card , sometimes you can have a no post due to that the graphics adapter wont start .
    Take the system bare bone ( mobo + cpu + ram + gfx )
    Have any award beep codes ? , note them down and decode them against
    http://bioscentral.com/beepcodes/awardbeep.htm
    Still stuck !
    Remove AGP + ram too .
    The mobo shall beep (endless beeping )
    Insert the ram , the mobo shall beep - missing gfx .
    Got this far and you know cpu + memory initialize but have problems with gfx or other devices
    later in the post/init process .
    Do not have any usb devices connected to internal or external connectors ,
    note that the USBOC pin un JUSB1/JUSB2 is NOT to be connected .
    Also try altering between ps2 and usb keyboard as this also has caused non post situation for people .
     

  • K8N Neo Platinum RMA and Processor RMA...Still No Post

    I recently RMA'd my MSI K8N Neo Platinum nForce3 board after trying all the stickied information at the top.
    I received the board and still my system did not post....soooo, I RMA'd the processor (AMD 64 3000+) and got a new one.
    I just tried to put my system back together and still no post.
    My Video card (Radeon 9800 Pro) and Ram (OCZ 512) test out ok in another computer (not an AMD 64)
    I also recently purchased a new 450 Watt Power Supply.
    However, when I put everything together, it doesn't post and doesn't beep. The D-Bracket for the record is all Red LEDs, although I've read some threads that say that doesn't necessarily mean the processor is dead/seated incorrectly.
    Help me! Thanks.

    Try another keyboard , disconnect jusb1/jusb2 internal connections to case front panel or multicard reader device .
    Also try to get the system to post without any hd/opticals connected to ide or sata ports .
    After changing/disconnecting things do a cmos reset and try again .
    There must be something in your rig preventing post if yo've received a new mobo from rma , and cpu too .

  • Help plz!! k8n neo platinum... :(

    hi guys, im new here, and i dont know what else to do.... :( so this is the situation:
    I just bough my new mobo and cpu like a month ago, and it all works fine... but last week i bought a new memory Kington PC3200 value ram 512mb,  and now everthing is a hell :(
    at beginning windows crash and blue screens are all the time, then i decided to format c and reinstall windows xp pro...
    now everything is worst!!!!
    i cant even install win xp, it crash all of a sudden, or it just blue screen while it's intalling the windows... :(
    i dont know what to do or what is wrong.. i test the ram in other pc and it works fine...
    whe the ram is in dimm 1 the windows setup just froze in the "starting windows" while in dimm 2 or 3 it goes all the way to installing windows, but then latter it just crash...
    i have almost everything in the bios in auto... and i dont know what else to do :'( plz help me out...
    my specs are:
    Semprom 3100+
    MSI K8N Neo Platinum
    BIOS 1.4
    PC3200 Kington value ram
    MSI Geforce nvidia 5200fx
    btw before the new ram, i had 2 sticks of DDR 266mhz one of 128 and other was 256 all was kingston... can anyone help?? plz...
    thanks

    Those are what's usually called memory timings.  Before you try adjusting those numbers, you should try clocking the RAM down from 200 to 166 in the BIOS and see how that works.  Also try to set your RAM at 2T instead of 1T and see what that does.
    If you want to mess with the timings, the following comes directly from this post: Overclocking Guide
    "Memory Speed
    Memory speed is often tied to the FSB. For example, a Double Data Rate (DDR) 400 memory has frequency 200MHz and the module rating is PC3200. Half the performance increase you may see from overclocking a CPU comes from increasing the speed at which the processor can talk to the memory.
    When you buy memory, you may see it has label 2-3-3-7-1T. And you may also hear people saying my memory is a 2-3-3-7 one. But what does it mean? The answer is:
    CAS Latency = 2 clock cycles
    tRCD = RAS to CAS delay = 3 clock cycles
    tRP = RAS Precharge = 3 clock cycles
    tRAS = Active to Precharge = 7 clock cycles
    Command Rate = 1 clock cycle
    Different motherboards may call the above differently and not all of them will appear in the BIOS. You may need to check with your motherboard’s support team and the motherboard manual. If you have any option above in your BIOS, you can also start to adjust them. Obviously, the smaller the number the faster the memory will be.
    To know more about memory please read:
    http://www.corsairmicro.com/corsair/prod...3707/index.html
    AND
    Memory Roundup
    AND
    http://www.anandtech.com/memory/showdoc.aspx?i=2223
    Keep in mind that this RAM you are using has already been reported as not working well with this mobo.  In addition, when you have to start tweaking BIOS RAM performance down from the defaults, just to get it to work, it's not generally a good thing and means you're RAM is not up to snuff.
    But good luck with it.

  • Memory Corruption on K8N Neo Platinum - HELP!

    I am having some problems with my cousin’s computer that I built for her last September.  She brought me the computer because she got an error that the system32/config/system file was corrupted and couldn’t boot the computer.  I got the file replaced and got the computer re-updated to where it worked.  Then the same thing happened again.  This time I did a Windows reinstall and the computer acted a little sluggish and iffy so I did a memory test.  I found the memory was all corrupted.
    First here are the pc specs:
    MSI K8N Neo Platinum with 1.7 bios
    Athlon 64 3000+
    120GB Seagate SATA hard drive
    NEC DVD Burner and Samsung DVD ROM
    Radeon 9550
    512MB Corsair Value Select 2.5CL DDR400
    Antec 350W psu and Antec Case
    I ran Memtest86+ v1.6 and the Corsair stick had errors in Test 3, 4, 5, and 7.  In tests 3 and 4 there are 50 errors but at the 98% of Test 5, the errors jumped to 146,432 and they were 500.8MB part of the stick.  I got the same results when I moved it to DIMM2 slot.  I also get the same results when the HT is at 1x or 4x.
    I tried a known working 512MB stick from my sisters Athlon XP 2500+ pc in the A64 pc.  It is a Mushkin PC3200 Basic stick.  I get errors only at 98% of Test 5 which amounts to 109,568 errors.  Same results in DIMM2 slot. 
    But when I test the Mushkin in my sisters pc, it has no errors.  But the Corsair stick in the AXP pc gets errors on Tests 1, 3, 4, 5 (only at the 98% mark), 6, 7, 8 but only a total of 317 (a lot less than 146,000 in the A64 pc.)
    So, I know the Corsair memory is bad, but now something is also wrong with the motherboard and /or cpu right? 
    If you need any more info let me know.  I’m new to the forums and they look very helpful.
    Thanks.

    Quote from: blazing storm on 23-August-05, 05:30:00
    Look in the bios and loosen up the RAM settings. Make sure the RAM isn't being stressed into settings that are too hard for it to handle.
    See I told you to loosen it up...
    I speak from experience as the same happened to me and loosening settings stopped errors.
    Glad you managed it, well done...

  • Post problem with K8N Neo Platinum

    I am assembling a system for a friend and it hangs according to D-Bracket2 on Processor initialization (Led 1:red, led 2:green, led 3: green led 4: red)
    Specs
    PSU:   Codegen 350W    ( 3,3V   14A
                                           5V     30A
                                           12V    15A  )
    VGA:   Sapphire Radeon 9800 Pro 128MB
    CPU:   AMD Athlon 3000+
    HDD:   Seagate 7200.7  120GB  in   SATA1-port
    DVD:   MSI DR8-A  DVD Burner
    RAM:   M-Tec 512MB  DDR400
    If the problem is the processor it should hang on Power On (all leds red), right?
    There's some damage done to CPU fan connector so the sensor wire from the CPU fan might have no connection to the mobo. How about ESD-damage, can it cause this?
    Another thing I might have done wrong is connecting front panel connectors.
    I am just hoping and praying that the processor is OK and the mobo causes this.

    Thanks to RacerX for answering but the problem wasn't the PSU.
    Mobo caused it and I replaced it.  I think it was the physical damage I mentioned in the first post. I also changed hdd from SATA1-port to SATA3-port but I don't think it matters.
    Now everything works fine so +12V/15 Amps is enough.
    Does the K8N Neo Platinum hang on Processor Init if it doesn't detect CPU Cooler?

  • Help with MSI K8N Neo Platinum

    HELP please- motherboard MSI K8N Neo PLATINUM: I tried to take away the backplate for the heatsink (on the back side of MB) in order to install the zalman HS beafore i read the forum (use a fan...) and the worst of all happend:
    I scratched the back surface!! the scratches are minor, that is 4 scratches half a milimeter long each and not deep but i can see the copper of some lines leading from the memory slots to the processr. My question is : can I try and build the computer on that motherboard anyway or better buy a new one? is there a risk of dammaging other components? oh god what a mistake!

    Make sure the new backplate is non-conductive. The backplate for the Hyper 6 has a non-conductive sticker on it. Make sure to keep it on if youve got one... If the lines are exposed even with the back-plate on perhaps you should cover them with some non-conductive (100% non conductive!) tape or something.
    Then it doesnt matter if they are exposed, as long as they are ok.
    A good tip, which got when i was removing my backplate, is to use a blow dryer to heat it up and the remove it with your fingers. That way youll also notice if it gets to hot
    The glue gets sticky at blow drier temps. And pls, dont singe the MB with your blow dryer, you only have to make it hot, and if you cant touch it, how can you remove it with your fingers?
    I guess theres no way of telling if you have a serious prob and no way to tell if your cpu will be ok. I guess you could (?) try and start it wíthout anything (cpu, mems) but a PSU, and then, if it (and maybe the PSU) goes "!Pfsssssss!"  or "bang!", youll now you will have to replace it.
    I put a screwdriver through an asus board once, and it still worked...  

  • MSI K8N NEO PLATINUM BlueScreen Issue! Help!

    I'm having an issue with my MSI K8N NEO i get the blue screens occasionally.. A friend of mine says its a IDE driver issue.. LMK Here are the system specifications.
    MSI K8N NEO PLATINUM
    ATHLON64 3000+ @2.01 (stock)
    SAMSUNG 512MB PC3200 CAS 2.5
    PNY MX440 64MB DDR AGP8X
    MAXTOR DIAMONDPLUS MAX 8 40GB, 7200RPM SLIM
    300W GENERIC PS
    LMK whats wrong if you have ideas, i dont know if you have sufficient information to come up with a conclusion.. im not too sure whats going on either.. But A friend of mine is getting exact same issues he says its IDE conflicts.. now when the Blue screen comes up it doesnt stay long enough to give a moment to read it.. lmk if you have ideas thx..

    which drivers are you using?
    Right click MY computer -> properties -> Advance -> start up and recovery -> system failure -> uncheck "automatically restart"
    this way it will stop at the blue screen and get an stop error number
    Or view the error log
    Help and support -> Pick a Task ->Use Tools to view your computer information and diagnose problems  ->under Tools ->  my computer Information-> View Advanced System Information  -> View error log
    it shows all errors by date migh provide you error numbers ie. 0x000008e

  • MSI K8N Neo Platinum with Vapochill Case problems - Help anyone. :)

    Hi all,
    Had a bit of a tricky problem and as Im new to this board I have no idea what could be causing this.
    First all all system specs:
    Athlon 64 3700+ Clawhammer
    MSI K8N Neo Platinum -
    1 gig Corsair XMS ProL Low Latency Ram (2 x 512mb)
    Nvidia Gefore 6600GT
    1 x WD Raptor 10000rpm HD
    NEC 2500a DVD writer.
    Eye-T 550w PSU.
    Vapochill SE Case with installed Vapochill Phase change cooling.
    Here are photos of it in its present state, you will notice that it isnt installed in the case at the moment.
    The reason for that is because the two wont work together and I want them to so so bad...
    So, hopefully someone here can save the day for me - here goes.
    I have tested the Motherboard and all other componants outside of the case and everything runs smoothly and there are no problems what so ever, great.
    I have also retested the Vapochill case with another motherboard and that also works without a hitch.
    The problem comes when I insall the MSI board into the system, all hooked with a really basic setup, PSU, Case cooling, CPU and Ram. Flick the on switch on the power suply and the system turns on for around 1/2 a second then turns off again. I found this strange because it soundnt come on at all until I press the power button.
    If I press the power button the same thing will happen over and over.
    I have tried a different powersupply and this does nothing at all.
    I have checked for shorts and there is no possible way it is shorting on anything.
    I have a fan plugged in where the CPU fan would go and this doesnt help.
    I have taken it back out and tested it again and it still works ok.
    Does this sound familiar to anyone? Are there any secret Bio's menu's that would have an option that would solve this?
    Any help would be greatly appreciated.
    Glenn

    When you are running the MoBo standalone, what are you connecting to the Power, Reset, HDD, etc. pins ?  Are you using the wires from the Vapochill case, or something else ?  It looks like a single cable with an intermittent switch (red/white cable).  I once had a similar sort of problem and it was because I hadn't connected up (the incredibly fiddly) cables correctly.  Other than that, I would have gone for a short of some sort - but you have checked that already, so . . . .
    As to the system starting to power-up when you switch on the PSU, I wouldn't worry too much about this.  It seems to happen from time to time with some of my systems - amongst other things, the BIOS can be set to resume to previous state after a power-fail.

  • MOVED: MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    This topic has been moved to AMD64 nVidia Based board.
    MSI K8N Neo Platinum (MS-7030) won't post and just beeps

    1)Main Menu - No Post/No Boot problems and fixes   - Bios-Central Award Bios Beep Codes + others
    2) Memtest86+ As Stated
    3) Power Suppy Requirements & Selection
    4) Post Specs re Powe supply 3.3v 5v & 12v Amps., Gfx cards Drives etc.,

  • K8N Neo Platinum hangs at "Initializing Keyboard Controller" step in POST

    Hi Folks,
    Here is my system:
    MSI K8N Neo Platinum (New in box) (no clue on bios version, as I can't access it yet)
    Athlon 64 3200+ 2200Mhz, 640Kb Cache
    Thermaltake CL-P0025 Silent Tower CPU Cooler (VERY careful installing this)
    2x512MB Mushkin 991460 EM3200 400Mhz DDR (
    ATI AIW Pro X800XT (AGP)
    OCZ ModStream 450W PS (3.3/28A, 5/45A, 12/26A, 220W/312W)
    WD 74GB Raptor
    Plextor 712A DVD/CD (SATA)
    Here is my dilema:  box powers up, POST stops at "Initializing Keyboard Controller". ( I know this because the little lights on the D-bracket tell me so.....:-) I have been on these forums as well as AMD's forums all day now, and have tried everything suggested, except swapping PS.  But I think I have an adequate model.
    One by one, I have disconnected any sources of possible problems.  I have reset my bios too many times to count.  I have isolated the MB outside of the case.  I have re-seated everything numerous times.  I changed Bios battery.  I've swapped RAM, and it's positions.  Even took it all off.  I even bought another K8N from Ebay, and have the exact same results.  At no time has the status lights displayed anything different, except for a quick change in color of light number 3 when I do a front-panel reset.  Right now I have nothing but the processor on the board and I still have the same result; POST hanging at "Initializing keyboard controller".  I have swapped keyboards unplugged the keyboard. 
       I am leaning toward the processor now.  What am I missing?  Should I just do an RMA and be done with it?
       Suggestions encouraged......
    James

    Quote from: sincity337 on 04-August-05, 12:22:07
    Bowen,
       I've got an old Asus P2B that still runs like a champ, although slow by todays standards.  You are right about it being rock solid, I have never had a problem with it, not one.  As a matter of fact I still have it and I use it for my "linux box".  Oops, a little off topic.
       Anyway, it looks like MSI received the board today.  I will start the stopwatch and see how long it takes to get a replacement board. I'll keep you guys posted.
    James
    Yeah those boards were the best I've seen.  The Intel 865 chipsets are pretty good too.  My previous 845 based mobo was nice as well.  In the past, using VIA boards have been hit and miss with me.  The K8T800/Pro and K8T900/Pro seem to be very stable though...still I would get an nForce 4 chipset over the newest VIA boards.
    This is OT but I just received my shiny new BFG GeForce 7800 GTX OC card a few days ago and I was very surprised at it's performance.  I was using a crappy Radeon X300 because I needed a temp card until I could buy either a 7800 GTX or the upcoming Radeon X900 XT.  My last system I had a Radeon 9800 Pro and it ran flawlessly.  I only had one problem with that card and it was driver related to only one game.  The game was Call of Duty and that issue was resolved by going down to an older driver, but then ATi corrected the problem with a new driver release.  Anyway as fast as the 7800 GTX is, I hated it!  The reason is that despite it's awesome speed; the only way I can put it, is that it doesn't run games as smooth as Radeon's do.  It was especially bad with Battlefield 2.  This is ironic because BF2 is supposed to be optimized for nVidia cards. 
    It has a bad stuttering problem with BF2 and allot of people have this issue.  Some have this problem with ATi cards but most are nVidia users.  Even when I set the quality down to the same settings as my 9800P was at, it did the same thing.  Other games like Counter-Strike: Source ran fine unless you had bots.  Heh, even my slow X300 ran games more smoothly (not faster and at a much lower resolution and quality setting but still smoother) than the 7800 GTX.  I sent the card back and I'm getting a full refund.  I'm waiting on ATi to release their X900 XT and I'll buy that.  What's strange is that prior to buying my 9800P two years ago, I had only used nVidia cards since the TnT2.  Well times have changed I guess. Oh well, I guess I had to learn the hard way, but at least this way I know I'm getting the right card!

  • K8N Neo Platinum VERY Slow POST

    Hello,
    I have a K8N Neo Platinum and have been running it successfully with win2k for a few years now.  My system went down and I decided to update everything when putting it back together.  I'm using Win 2K and trying to get XP64 to work.  A long story short is that I used Live Update to download the latest BIOS.  V2.1 dated 11-11-05.  Ever since then the board takes AGES to boot.  From the first beep to the completion of memory test is about 5 minutes.  After that everything works just fine.  During the 5 minute delay there is nothing I can do to get it to respond.  There is nothing on the screen indicating that anything is going on.  Quickboot is enabled in the BIOS.  I tried stepping back to the 1.9 bios and still the same issues.  Unfortunately I didn't backup the working BIOS.  :(
    I'm pretty stumped on this one.  If anyone has ever seen this problem and knows how to help that would greatly be appreciated.   

    Tried to reset the bios by removing the cmos battery and leave it for 10 minutes and set the default values. Tried to avoid using the the liveupdate as it causing a lot of problems. Used the manual way to flashed our bios is better. I'm sure that you've selected the wrong bios when you flash it.
    ps: please create your rig and put in your signature including the psu and bios revision so others can help you.

Maybe you are looking for