K8N NEO PLATINUM Nvidia nforce 3 250 GB Chipset rebooting - hanging !@$%@#$@

Hi folks,
I am working on the K8N NEO platinum motherboard based on the Nvidia nforce 3 250 GB Chipset.
A couple of days ago I lost my internet connection (broadband). After a couple of minutes it ok again. But suddenly the computer frooze.
After rebooting (button on case) I found out that lots of things couldn't be closed anymore once they were opened. I needed to use CTRL-ALT-DEL to go the the active Tasks. But then that started to freeze too so I decided to wipe everything of the system.
I repartioned and reformated the computer with the win XP PRO CD and reinstalled the OS. I saw immediatly that the system was slower then before and that it did not found the internet connection anymore. I checked the LAN connection and there it sayed that the LAN card was working well but that no cables were connected. This was not true because I dubbel checked them twice. I even replace the cable. It was not my Internet provider neighter because the computer is in a local network and others had no problem to access the internet. So I decided to reinstall and reinstall it again. I reinstalled the system (partioning, formatting) it 4 times. The last time suddenly it found my connection back. Then I installed all updates of windows and I used my live update from MSI to update my components.
I am using live update 3 and updated the BIOS and all other parts who needed to be updated. This was done without the presence of a AV and so on. Everything went well and no errors occured. I received everytime a message with success.
Today my computer suddenly hanged itself again. This already 3 times. Nothing is possible anymore except the boot button on the case.
I also encountered 3 times the while surfing the computer suddenly reboots itself without any warning or message.
What the hell is going wrong here ???
Can aynone give me a clue please ?
Is the motherboard dying ?
MSI live bios Version 3.7.000
MS-7030(K8N Neo Series / K8N Neo platinum)
BIOS version 1.7 (latest version)
Award bios release
2005/05/10

Charly.P
Russ_xp was asking about the Max amps on your power supply should be on label like this:-
Need yours - 3.3v= ??A.5v=??A,12v=??A
luck

Similar Messages

Jerky video and sound with my k8n neo platinum

Hi:
I wonder if any of you have had a similar problem.
My system: K8N Neo Platinum Nvidia nForce 3 250 Gb, AMD 64fx 3200+, 1 gig memory Kingston PC 3200, Gigabyte Nvidia GForce Fx 5200 128 AGP video card, HD Seagate ST2120026A 120 gig, WD 40 gig, Toshiba DVD, Lite on DVD-RW. OS XP Pro SP2. Display Samsumg 17 Syncmaster 710V.
The system worked like a champ for about a month, the all of a sudden it started playing videos and audio in a jerke mode, it would play a few frames and then pause for a fraction of a second and then start again.
Please can anyone help?
Thanx in avance

Try uninstalling the graphics card drivers and then installing the latest ones.
Also try defragging hard drive and cleaning unecessary programs from the computer and run windows update.

MSI K8N NEO Platinum Edition memory question

Hi there,
I've currently got a MSI K8N NEO Platinum Edition (Nforce 3) motherboard and 2X 512 MB Corsair Value Select memory modules (both double sided) running at DDR 400 - this runs completely stable and has done for a number of months. I would like to increase my memory to 1.5 Gig but there seems to be a lot of issues?
I originally planned to buy an additional 512 Meg Corsair value select chip and place it in Bank 3 - is this acceptable?
I assue that i would have to drop the speed down to DDR 333 from 400, could anyone tell me how much of a difference this actually makes (when playing FPS games Doom3 etc..) ?
Any help would be greatly appreciated as i've been looking through both this forum and the Corsair one and i cant seem to find the answer.
thanks in advance !

Just note that there are combinations of two sticks that will also make the board run in DDR333 mode (see page 2-8 of the manual). For example, using two double-sided sticks in DIMM2 and DIMM3. I've actually managed to get it to work at DDR400 in those two slots, but it's not perfectly stable and overclocking diminishes drastically. Bottom line is the system will work fine when forced to DDR333...as long as you don't expect to overclock the RAM to any significant degree.

D-bracket2 codes? (K8N Neo Platinum)

hey there, its like this.. i just bought a A64 and a K8N Neo Platinum motherboard.. all worked fine nice bench scores and all was happy indeed!
then i started playing the CSS beta.. 30 seconds later the system dies.. (!?) thinking what the heck now? so i checked the CPU sink it was HOT HOT HOT!! after this the mother board dont start not even a fans works.. if i remove the CPU the system "starts" fans works etc.. now i wounder if the CPU is dead? and where are the D bracked fail codes? cuz when system has no CPU 4 red LEDs are lith.. guessing that meens that a CPU is missing.
any one knows where i can get a fail code description.. have checked the manual, but no luck..
also is this coverd by any warranty? CPU just dont overheat lik that.. had mounted the CPU cooler corect etc..

K8N Neo Platinum D-Bracket LED Combinations
4-Red = system hang, processor damaged or not installed properly
1-Green (top left) all others Red = Early Chipset Initialization
1-Green (top right) all others Red = Memory module damaged or not compatible
2-Green at top/2-red at bottom = BIOS image to RAM for quick boot
1-Green lower left = Initializing Keyboard Controller
2-Green left side = Testing VGA BIOS
Red upper left and lower right = CPU Initialization
1-Red lower right = Testing Real Time Clock
1-Green lower right = Initializing Video Interface
Green upper left and lower right = BIOS Sign-On
2-Red left side 2-Green right side = Testing Base and Extended Memory
1-Red lower left = Resource Assignment
2-Red top 2-Green bottom = Initializing Hard Drive Controller
1-Red upper right = Initializing Floppy Drive Controller
1-Red upper left = Boot Attempt
and all GREEN = Operating System Booting

SATA port multiplier on MSI K8N Neo Platinum - NForce3 250Gb?

Hi,
I have a MSI K8N Neo Platinum, which uses a NForce3 250Gb chipset. I have read that port multipliers can use either SATA or SATA II hosts and drives, but I don't know if the technology is 100%, transparently compatible.
Is the aforementioned chipset/motherboard compatible with port multiplier technology?
Does it support FIS, which gives the greatest perfomance?
Does it need a BIOS or driver update?
Thanks for the attention
Brazilian Joe

Quote from: syar2003 on 22-February-06, 05:10:37
Hi!
The K8N Neo Platinum (MS-7030) doesn't use -5v to anything.
So the -5v from the old atx spesification is not needed in your case.
WoW, thanks for fast reply!
So, it won't be any problem to use Antecs SmartPower 2.0 450W with this board then? Want to make sure about it, before accept Antecs offer for replacement and had spent over 4 days to find the problem with his computer. Really don't want to do it again.
This is his riggs:
Antec Sonata
AMD 64 3000+ S754
Corsair Value S. PC3200 DDR 512MB
Maxtor Diamondmax 9 250GB SATA
Maxtor Diamondmax 9 IDE 160GB
Sapphire Radeon 9550 Atlantis 128MB DDR
and
Accton ethernet card on PCI slot
MSI D-Bracket2
so
With the "new" Antec SmartPower 2.0 450W
Any problem with this rigg and PSU?
edit:
Dound this post that it said the board do need -5V and now Im confused?
http://www.archivaty.net/forums/about12964-30.html

MSI K8N-NEO-PLATINUM nForce3 250 + Corsair vs.

Hi, I'm thinking of buying a new computer with a MSI motherboard and now thinking if these will correct and have no direct problems, MSI K8N-NEO-PLATINUM nForce3 250GB + Corsair VS512MB400 Value Select 512Mb DDR PC3200 400MHz 184pin Unbuffered CL2.5. I'm not the guy who is intresserd in overclocking and such things.
Will that motherboard and memory correct good with each other ?
Sorry for my bad english. :D
//Johan
EDIT: I think I made this topic in the wrong forum. Mods move it to AMD64 nVidia Based board ?

MakubeX,
I have the Antec True Power 480. Unfortunately it only has 22 or 23 amps (the specs and the label on the psu have different ratings ) on the +12V rail. Most of the folks here recommend a power supply with at least 24 amps.
The good news is that the system in my sig is working flawlessly so the extra 1 or 2 amps don't seem to make a big difference, at least in my case. I will say, however, that according to Core Center my +12V rail runs around 11.5 volts, which is low and nearly out of ATX sepc. The low voltage will result in higher amperage draw...but again, the system is stable.
I wish you good luck

No More K8N Neo Platinum Nforce 3 754Socket Updates??

I just checked the site for new bios and for my suprise its just gone, it just not there ???

K8N Neo Platinum is placed under "archive", since they don´t make it any longer.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_list.php?kind=1&CHIP=17&NAME=Archives
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=572
New bios updates probably will be rare since it´s a mature board by now, unless there are some obvious reason for it like new 754 cpu model etc.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=572&kind=1

K8n neo platinum restarts or freezes :(

ok, hopefully you guys can help me, you seem to be pretty good at helping poeple on this forum. i want to say first that i have gone through this forum countless times during my time with this motherboard. I've searched and read alot on this problem, but i need help diagnosing my computer. My problem is this. I've had this computer for a little over a year, and it's ran fine up until about 2 months ago. I had a problem where i went to turn it on and it started but then shut off after about 4 seconds. i then had to flip the switch onthe psu for another chance. Then it worked, and worked for about a month without ever sseeing this happen again in that time. then recently it happend again only this time it never started up. eventually it would sometimes turn on and stay on, but wouldn't boot. i would have to use the psu to turn it off. i tried then the cmos and battery to no help. I rma'ed the board and when i recieved the new one i put it in. Now, my computer works as far as booting and everything. Everyting installed fine as far as os and drivers, games, ect.. Only it restarts or freezes randamly. I say that cause it doesn't necissarly mean when playing games or intense programs. it happend while i was typing this 2 times for example. I've done things like checked temps on cpu which show in the 30s idle. i've ran virus and spyware programs. I've flashed bios back to 1.4 which is what i had before and worked fine sept the temps readings, which i didn't mind. i flashed because i thought maybe 1.7 was my problem. I've also, what's making this hard to tell for me, ran stuff like 3dmark 05 without a crash, or full rounds of games fine. But other times durijng a game or just a webpage it'll crash. What i need is help finding the component that is causing this problem. I'm not sure what tests to use, but will try anything and tell yous results. I can buy a new piece to replace something, or rma something possibly, but i'd rather not just buy peices without any reason. Any help would be appreciated greatly. My build is
amd athlon 64 3400+
Ati radeon x800pro
ocz pc3200 400mhz ddram 1024mb
msi k8n neo platinum 1.4
wd 10,000 rpm 8mb ws740gd
sound blaster audigy 2
antec neo power 480w

ok, first, thanks for being patient with me richard and for taking time to help
2 things before the list. 1: other lan is in there cause i originally a year ago had trouble using the onboard one and there was a brand new lan card a friend had laying around. Then recently i was able to use the onboard to connect to net and the lan card to allow my girlfriend to go online through me on her laptop.
2. i just noticed in my computer it's showing i have a floppy drive, which i don't, but i suspect this is from the other night the cmos error and it reset my bios i think, so i just have to redue that.
interrupt request:
(isa)
0 system timer
1 standard 101\102 key or microsof natural ps/2 keyboard
4 communications port (com1)
6 standard floppy disk controller
8 system cmos\real time clock
9 microsof acpi-compliant system
12 ps\2 compatible mouse
13 numeric data processor
(pci)
5 nvidia nforce pci system management
14 nvidia nforce 3 250 parallel ata controller (v2.6)
15 nvidia nforce 3 250 parallel ata controller (v2.6)
16 radeon x800 pro
19 linksys lne100tx fast ethernet adapter(lne100tx v4)
19 via ohci complaint ieee 1394 host controller
20 nvidia nforce 3 250 serial ata controller (v2.6)
20 standard enhanced pci to usb host controller
21 nvidia network bus enumerator
21 nvidia nforce3 250 serial ata controller (v2.6)
22 standard openhcd usb host controller
23 standard openhcd usb host controller
i should say also, if this shows my drivers are not updated, i didn't because i never did before and it worked fine for a year, and i'm one of those that has the motto "if your computer is fine, don't tweak or upgrade stuff, don't touch or do anything"

*UPDATED 7/15/04* Complete guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum

Complete newbie's guide to bioses, drivers, and needed files for the MSI K8N Neo Platinum:
Last Updated: Thursday July 15th, 2004
Bioses:
(In order of date released.)
1.1b3 - (Download)
- Pre-1.1, given to reviewers to use in their reviews and benchmarks.
- Less stable, but supposedly you get slightly better overclocks.
1.1 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- Memory always run DDR 200 when install single side DDR on DIMM2 & DIMM3.
- Windows 2000 can't format the RAID IDE HDD when plug in Promise 378 controller.
1.2b5 - (Download)
1.2b7 - (No Download Yet)
1.2b10 - (Download)
- First attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and doesn't fix it for anybody with Clawhammer cores.
1.2b12 - (Download)
- Second attempt to fix false temperature readings. Fixes it for some people with Newcastle cores and some people with Clawhammer cores.
1.3b1 - (Download)
- Another attempt to fix temperature problems?
- Possibly fixes cold boot/power light issues?
1.2 Official - (Download)
1. This is AWARD BIOS release
2. This BIOS fixes the following problems of the previous version:
- System can't resume from S3 sometimes when install USB device.
- Support K8 Sempron CPU.
- Turn off keyboard LED in S3.
--Quick Guide for flashing BIOS, provided by MSI--
1. Create a MS-DOS boot diskette, then copy the the .exe and the bios file to the floppy disk. Both of these files can be found in the package you downloaded.
2. Press "Delete" and go to BIOS setup while computer bootup.
Check BIOS advanced features and see if BIOS flash write control is enabled
(This option must be enabled. If you can not find this setting, it means the BIOS can be
flashed.)
3. Boot from MS-DOS boot diskette and get a:\> prompt.
4. Type "", then press ENTER
5. The flash program will then ask "Do you want to save BIOS?", please press "N" for no. The when you see Press 'Y' to program or 'N' to Exit, please press "Y" to continue.
6. After flashing complete, remove floppy and reset the system .
7. Press DELETE or F1 when prompted at first reboot after flashing.
8. Load BIOS optimized defaults, then save settings and exits.
Drivers & Needed Files:
(Note: All these drivers are for Windows XP.)
Leaked Nvidia nForce3 Chipset Drivers Version 4.40
(Please use at your own risk, these are LEAKED drivers. Password for the .zip file is "ocworkbench rules". Also, you will need to rename the WinXP_2K folder in IDE to either WinXP or Win2K else the installer doesn't pick it up.) Thanks for the link Wonkanoby!
*NEW* Leaked Nvidia nForce3 Chipset Drivers Version 5.03
More leaked drivers? Seems some parts of the drivers are older and some are newer.
1. Windows XP Service Pack 1A (Web Install) -or- Windows XP Service Pack 1A (Full Install)
2. Microsoft DirectX 9.0b (Web Install) -or- Microsoft DirectX 9.0b (Full Install)
3. Nvidia nForce3 Chipset Drivers Version 4.24
4. AMD Athlon 64 Processor Driver Version 1.1.0.14
5. Nvidia Video Card Driver Version 56.72 -or- Omega Nvidia Video Card Driver Version v1.5303
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard Nvidia drivers.)
5. ATI Video Card Driver Version 4.7 -or- Omega ATI Video Card Driver Version 2.5.51
(The Omega drivers are third party drivers optimized for gaming, most prefer these over the standard ATI drivers.)
6. Onboard Sound Driver (Realtek AC'97 Audio Codec) Version A3.61
It is HIGHLY reccomended that you install the drivers/needed files in the order listed above. Please note that there are two #5's because you either install one or the other depending on your video card, do not install both of them.
You will come across a problem here though. You can't install the chipset drivers without installing the Windows service pack and DirectX first, but the Windows service pack and DirectX installs need the internet to download files and you won't have working internet until you install the chipset drivers. Here's what I did to get around this. Instead of downloading the web install versions of Windows service pack and DirectX, download the full version and and put them along with all the other drivers on a backup hard drive or burn them to a CD, this way you will have all the drivers you need when it's time to install them and none of them will require the internet to download files.
Another note when installing drivers. Apparently the Nvidia chipset drivers also come with drivers for the onboard sound, but people seem to agree that the Realtek onboard sound drivers are better. When you are installing the Nvidia chipset drivers, just be sure to uncheck the box for sound drivers when it asks you which drivers you would like to install. Now you can safely install the Realtek drivers without any chance of conflicting sound drivers. Thanks for the tip Wonkanoby!

Quote
Originally posted by RLiu818
Quote
Originally posted by Deviation56
Quote
Originally posted by RLiu818
You CAN install the nforce drivers BEFORE installing SP1. The only requirement to install the nforce drivers is DX9.
So is SP1 still recommended to install before the nforce drivers?
The installer still reccomends to install it beforehand for full USB 2.0 functionality... I would have put what you said in there but I wanted to keep it as simple as possible.
oh. IIRC the installer just says USB 2.0 will be fully functional after SP1 is installed. So after you install SP1 you go into device manager and u click update driver and it will auto search and update the driver.
Simplicity-wise, i guess its pretty much equal. It might take less preparation to just copy DX9 full onto a CD and install that first, then nforce driver, then right away you have yoru internet connection.
but i dunno.. i guess i will try it your way this time when my RMA"d board comes.
i will be fomratting and doing a fresh install later on today and will let you know if i come across any problems

K8n neo platinum, RAID configuration and linux

Hi all, please be gentile to me becouse I dont understand much about technical issues of computers...
Here is my problem: I am using windows XP but today I decided install Suse Linux 10.0 32bits version also, but a warning came out saying something about I have RAID by software and if I install linux the data of the discs will be erased. I have a SATA2 80GB hitachi drive with Windows XP installed and a 2 partitioned drive 120 GB samsung sp1203n (IDE) with data in one partition and an empty one that I want do install linux in it. Can someone tell me how can I configure a RAID without losing any data so I can install Linux? I hardly know what a RAID is... lol
Thanks in advance...
Here is my machine specification:
AMD Athlon 64 2800+
MSI K8N Neo platinum
HP DVD 200I
Philips DVD writer
Hitachi Deskstar 80GB SATA2
Samsung SP1203N 120GB IDE
Radeon 9600XT
2*Kingston 512 3200 cl3
Revoltec power supply with 25Amps in 12v rail

Quote from: kakarocht on 28-October-06, 13:05:36
Does your RAID shown you HEALTHY?
The Raptor drive shows as healthy.
Quote
You may need to press F6 (using the NVIDIA raid driver for Win64 if you're using the RAID). As Win32 and Win 64 using different drivers.
This has crossed my mind and is definitely on my list of things to try if all else fails.
Quote
Have you enable the RAID Array as Bootable Drive in the Bios?
All RAID options are enabled. I didn't touch the BIOS prior to starting the process. The RAID array wasn't listed in the BIOS as a bootable device. In fact, it wasn't listed at all. It was after I discovered this I used F10 to see if it was detected there. The drive was listed, but it wasn't bootable. I then made it bootable. After exiting this section, the PC booted straight into Windows. On the occasions when Windows started, I didn't go into the BIOS to see what it shows.
Quote
But why you need to used the NFORCE3 instead of Nforce4 Drivers from the NVIDIA website?
Because it's an nForce 3 board. Or are you saying the nForce 4 should work fine?
Quote
Gd luck.
Thanks.

K8n neo Platinum and Optical Drive problem?

I need some help figuring this out. I've been searching for awhile but can't find any more information so I figured I'd ask here.
I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
The problem is on the 411S where it will read the DVD/CD disk but when I try to use Cyberlink PowerDVD or Nero Recode to play or read the DVD it will just hang. If I don't try to play these files and just open them in explorer then I can access them.
I'm trying to see if there are some conflict issues with the nforce drivers but am still looking.
My setup is this.
AMD 64 3000+
K8n Neo Platinum nforce 3 250 Bios 1.4
Western Digital 120 gb hd
PQI 3200 1 gig memory
PNY 6800 GT
Audigy 2
Antec Trupower 420
Any help would be great as I'm totally stuck. Thanks.
Also to note I can play DVDs and use recode fine off the DVD rom drive but just not off the DVD writer (411s).

Quote
Originally posted by BluddSimple
I have a Lite on LDW 411s dvd writer that is on the same ide channel as a lite on dvd player (labled as JLMS SJ-HD1665 in the device manager.
You might have better luck making the reader the slave on the channel your HD is on. I had both a burner/writer on the same channel and while it worked, the performance was very poor.
Man, I need to get around to posting my specs someday, but I have the same MB and BIOS as you. I'm also using the nForce unified drivers including IDE.

K8N Neo Platinum hangs at "Initializing Keyboard Controller" step in POST

Hi Folks,
Here is my system:
MSI K8N Neo Platinum (New in box) (no clue on bios version, as I can't access it yet)
Athlon 64 3200+ 2200Mhz, 640Kb Cache
Thermaltake CL-P0025 Silent Tower CPU Cooler (VERY careful installing this)
2x512MB Mushkin 991460 EM3200 400Mhz DDR (
ATI AIW Pro X800XT (AGP)
OCZ ModStream 450W PS (3.3/28A, 5/45A, 12/26A, 220W/312W)
WD 74GB Raptor
Plextor 712A DVD/CD (SATA)
Here is my dilema: box powers up, POST stops at "Initializing Keyboard Controller". ( I know this because the little lights on the D-bracket tell me so.....:-) I have been on these forums as well as AMD's forums all day now, and have tried everything suggested, except swapping PS. But I think I have an adequate model.
One by one, I have disconnected any sources of possible problems. I have reset my bios too many times to count. I have isolated the MB outside of the case. I have re-seated everything numerous times. I changed Bios battery. I've swapped RAM, and it's positions. Even took it all off. I even bought another K8N from Ebay, and have the exact same results. At no time has the status lights displayed anything different, except for a quick change in color of light number 3 when I do a front-panel reset. Right now I have nothing but the processor on the board and I still have the same result; POST hanging at "Initializing keyboard controller". I have swapped keyboards unplugged the keyboard.
I am leaning toward the processor now. What am I missing? Should I just do an RMA and be done with it?
Suggestions encouraged......
James

Quote from: sincity337 on 04-August-05, 12:22:07
Bowen,
I've got an old Asus P2B that still runs like a champ, although slow by todays standards. You are right about it being rock solid, I have never had a problem with it, not one. As a matter of fact I still have it and I use it for my "linux box". Oops, a little off topic.
Anyway, it looks like MSI received the board today. I will start the stopwatch and see how long it takes to get a replacement board. I'll keep you guys posted.
James
Yeah those boards were the best I've seen. The Intel 865 chipsets are pretty good too. My previous 845 based mobo was nice as well. In the past, using VIA boards have been hit and miss with me. The K8T800/Pro and K8T900/Pro seem to be very stable though...still I would get an nForce 4 chipset over the newest VIA boards.
This is OT but I just received my shiny new BFG GeForce 7800 GTX OC card a few days ago and I was very surprised at it's performance. I was using a crappy Radeon X300 because I needed a temp card until I could buy either a 7800 GTX or the upcoming Radeon X900 XT. My last system I had a Radeon 9800 Pro and it ran flawlessly. I only had one problem with that card and it was driver related to only one game. The game was Call of Duty and that issue was resolved by going down to an older driver, but then ATi corrected the problem with a new driver release. Anyway as fast as the 7800 GTX is, I hated it! The reason is that despite it's awesome speed; the only way I can put it, is that it doesn't run games as smooth as Radeon's do. It was especially bad with Battlefield 2. This is ironic because BF2 is supposed to be optimized for nVidia cards.
It has a bad stuttering problem with BF2 and allot of people have this issue. Some have this problem with ATi cards but most are nVidia users. Even when I set the quality down to the same settings as my 9800P was at, it did the same thing. Other games like Counter-Strike: Source ran fine unless you had bots. Heh, even my slow X300 ran games more smoothly (not faster and at a much lower resolution and quality setting but still smoother) than the 7800 GTX. I sent the card back and I'm getting a full refund. I'm waiting on ATi to release their X900 XT and I'll buy that. What's strange is that prior to buying my 9800P two years ago, I had only used nVidia cards since the TnT2. Well times have changed I guess. Oh well, I guess I had to learn the hard way, but at least this way I know I'm getting the right card!

K8N Neo Platinum problems

Hehe dont know where to start... guess ill list my computer specs.
(new)Board: K8N Neo Platinum BIOS v1.4 (Lastest nforce drivers)
(new)CPU: AMD 64 3200+
(new)RAM: (2)Kingston 512mb PC3200 400MHz
(new)PSU: Enermax EG465/AX 460W
HD: Maxtor 80gig 7200RPM
OS: Windows XP Pro
(new)Graphics: Geforce FX 5700LE (Lastest nvidia drivers)
(new)Sound: SB Audigy 2
Standard Microsoft Opti Mouse(USB port)
Standard Keyboard (PS2 port)
Some Bios Settings:
Memory Voltage: Auto (But have tried it at 1.5 and 1.6 and still the same problems)
AGP Volts :1.5
CPU volts : Auto
Max Memclock: 200MHz
2T Timing
TLc:3.0 Trcd:3.0 Tras:8 Trp:3
Spread Spectrum: Disabled
Nv/ATI Disabled.
I just recently started buying parts, about a week ago, to upgrade my old AMD Athlon 2000+. Got all the new parts(listed above). Ive been having all sorts of problems. Ill list them to see what you guys think
1.) Whenever i start playing games or a graphicly intense program(ex: video editing, or 3D programs) or if i play a game and i do any sort of loading(ex: zoning, changing levels, loading player models etc.). My game either crashes to the desktop without errors, or my system will crash and drop to a bluescreen with the stop error "STOP: 0x0000007E". Or ill get a different blue screen saying "Dumping physical memory" or something can't read it cause it just appears then reboots my computer right away.
Or just recently i crashed to my desktop but got an error box saying "There are stability problems with the Geforce FX 5700LE please check if you have the correct drivers etc."
Then just the other night i was playing a game and crashed to the desktop but got a virtual memory error saying "Ran out of Virtural memory etc etc. Please check your Virtual memory page file". So i did and increased it a bit cause i saw it was set lower than the actual amount of ram i have.
I guess it's just 1 big problem but im just so confused about it. Been trying to troubleshoot it for about a week and about to give up. This monday is my last day to return things back to the store, would rather not cause ive heard such great things about AMD 64's and the Neo Platinum board.
Hope you guys got some ideas Im just about out of them heh.
Thanks.

Don't know if you have tried this things but heres my list of things .
BIOS:
-First load bios optimized defaults , then ..
-Set the cpu vcore voltage up by + 0.025v (don't use auto)
-Increase the memory voltage vdimm to 2.7v (or the vendors max defined voltage)
-Disable fsb spread spectrum
-Disable dynamic overclocking
-Disable cool n quiet
-Change the multiplier from startup to 11
-Turn off auto on memory timings in cell menu/dram and set all values manually
and the max mem frequency to 200.
-Turn off AGP fatwrites
CASE:
USB connectors
-Disconnect case front usb from usb header on motherboard.
-Disconnect the d-bracket from usb header on motherboard.
-Change the red MSI ide cable if used.
-Check all stand offs/spacers under the motherboard .
-If using PS2 kb and mouse some board have mislabeled color code
making people connect mouse in kb and vice versa .
Correct is keyboard in the bottom mouse top.
STABILITY TEST:
Outside windows and windows drivers:
Download and test with memtest86 v 3.1
http://www.memtest.com
Inside windows:
Test stability with prime95 and/or hotcputester

K8N Neo Platinum driver installation

There are 4 downloadable mainboard driver zips at MSI for K8N Neo Platinum (not including BIOS a upgrade) -
1. NVSA020.zip - SATA controller drivers
2. NF3_CK8S.zip - Chipset drivers including:
Ethernet NRM driver
Network management tools
GART driver
SMBus driver with updated uninstaller files
*Win2K IDE 2.6 driver with updated uninstaller files
*WinXP IDE 2.6 driver with updated uninstaller files
3. USB2W9XME009.zip - USB 2.0 drivers
4. ALC69.zip - onboard Realtek audio drivers
*applicable version of Win OS
Are ALL these drivers from MSI to be loaded?
I think I read in some other posts where some of these drivers (?) cause problems and therefore default Win OS (or chipset manufacturer) drivers should be used instead. Is there a concensus (or list) of which drivers should or shouldn't be installed and the correct procedures and order for doing it?
Perion
[Soon to build]
MSI K8N Neo Platinum
AMD 64 3200+
Corsair Value Select Mod# VS1GBKIT400
--> 1G(512MBx2) DDR PC-3200 CAS Latency 2.5
Western Digital 120GB 7200RPM SATA Hard Drive, Mod# WD1200JD
ATI RADEON 9800PRO 128M
Thermaltake Gaming Tower XaserV Series Mod# V7000+
--> Case Fans: 2 x 80mm, 3 x 90mm
ENERMAX 460W PSU Mod# EG465AX-VE (W)FMA
--> 3.3V@35A, +5V@35A, -5V@1A, +12V@33A, -12V@1A, [email protected]

Quote
Originally posted by Perion
There are 4 downloadable mainboard driver zips at MSI for K8N Neo Platinum (not including BIOS a upgrade) -
1. NVSA020.zip - SATA controller drivers
2. NF3_CK8S.zip - Chipset drivers including:
Ethernet NRM driver
Network management tools
GART driver
SMBus driver with updated uninstaller files
*Win2K IDE 2.6 driver with updated uninstaller files
*WinXP IDE 2.6 driver with updated uninstaller files
3. USB2W9XME009.zip - USB 2.0 drivers
4. ALC69.zip - onboard Realtek audio drivers
*applicable version of Win OS
Are ALL these drivers from MSI to be loaded?
I think I read in some other posts where some of these drivers (?) cause problems and therefore default Win OS (or chipset manufacturer) drivers should be used instead. Is there a concensus (or list) of which drivers should or shouldn't be installed and the correct procedures and order for doing it?
1. NVSA020.zip, these drivers come in a diskete with your mainboard as well but possibly on an earlier version. You will need these if you plan to use a SATA Raid/ or simply a SATA drive when installing your OS of choice. Please note that if you plan to use a single SATA drive use SATA 3 or 4. In this case the drivers are not necessary but rather optional.
2. These are the nforce platform drivers. You can either use the ones off the msi site or the ones from nvidia's site. In any case i would suggest you replace the IDE driver package with the 2.5's -> http://www.nvidia.com/object/nforce_ide_4.15_win2KXP.html
3. if you plan updating to a sp 1 or 2 versionof xp, you will probably not need these.
4. ALC69.zip - > Here is the latest realtek drivers.

K8N Neo Platinum & Thermaltake Kandalf Tower

I just bought a Thermaltake Kandalf tower and put my K8n Neo Platinum Mobo in it but I am having troubles with wiring the top panel of the tower to the mobo.
The Kandalf has the two USB plugs but when I plug them into the mobo it cuts out the USB plugs on the D Bracket, I would like to have both running if possible.
Also, for the life of me I can't figure out how to connect the Front Panel Audio Connector : JAUD1 on the mobo to the Kandalf's audio panel.
Any help would be greatly appreciated

Quote
Originally posted by Perion
There are 4 downloadable mainboard driver zips at MSI for K8N Neo Platinum (not including BIOS a upgrade) -
1. NVSA020.zip - SATA controller drivers
2. NF3_CK8S.zip - Chipset drivers including:
Ethernet NRM driver
Network management tools
GART driver
SMBus driver with updated uninstaller files
*Win2K IDE 2.6 driver with updated uninstaller files
*WinXP IDE 2.6 driver with updated uninstaller files
3. USB2W9XME009.zip - USB 2.0 drivers
4. ALC69.zip - onboard Realtek audio drivers
*applicable version of Win OS
Are ALL these drivers from MSI to be loaded?
I think I read in some other posts where some of these drivers (?) cause problems and therefore default Win OS (or chipset manufacturer) drivers should be used instead. Is there a concensus (or list) of which drivers should or shouldn't be installed and the correct procedures and order for doing it?
1. NVSA020.zip, these drivers come in a diskete with your mainboard as well but possibly on an earlier version. You will need these if you plan to use a SATA Raid/ or simply a SATA drive when installing your OS of choice. Please note that if you plan to use a single SATA drive use SATA 3 or 4. In this case the drivers are not necessary but rather optional.
2. These are the nforce platform drivers. You can either use the ones off the msi site or the ones from nvidia's site. In any case i would suggest you replace the IDE driver package with the 2.5's -> http://www.nvidia.com/object/nforce_ide_4.15_win2KXP.html
3. if you plan updating to a sp 1 or 2 versionof xp, you will probably not need these.
4. ALC69.zip - > Here is the latest realtek drivers.

K8N NEO PLATINUM Nvidia nforce 3 250 GB Chipset rebooting - hanging !@$%@#$@

Similar Messages

Maybe you are looking for