K8N NEO-V v2 s754

have anyone you this mobo? is it any good
thanks

It is the newer version of the k8n neo model, it should be a good one... as good as the previous model even if i don't like the way it only has 2 dimms sockets!

Similar Messages

Any MSI K8N NEO Platinum Edition S754 nForce3 users?? Need advice..

Hi, thinking of building a budget system around a S739 Clawhammer 3700 with an
MSI K8N NEO Platinum Edition S754 nForce3 board. But have a few concerns..
- Will this board run on this chip or will it need updated BIOS to do so?
- Will it work with crucial 3200DDR memory.CL=3 • UNBUFFERED • NON-ECC • DDR400 • 2.6V • 64Meg x 64 ?
- Can it take an extra (3rd) 512 stick of this ram?
Thanks.

I have ran the Neo s754 model with 2 * crucial CT6464Z40B 512MB cas 3 modules and never had one single problem with the combination
of A64 GC version , mobo and RAM .
Three modules is tough on the single channel memory controller though , as it would have to deal with 6 banks
and you probably see the ram max speed as DDR333 and 2T commandrate is what it can cope with.

MSI K8N NEO PE + R9800Pro

hello guys... have a very very shity problem.
i got my new computer for 4 weeks ago. i put all together and it works flawless.
but yesterday when i was going to play some GTS:VC i got an bluscreen. After that i rebooted and all worked again. tryed tp play again and the same bluescreen again. Reboots the system but now my computer wont post anything on the screen. i checked the monitor and changed gfx. The monitor posts again... First thing i was thinking of was that the gfx died. but i tested it in an older computer and the gfx works... i tryed the R9800Pro in my new comp again and nothing.
When i have the R9800Pro in i get a error msg from the speaker. Sounds like this
*beep* 0.5 secounds *beep**beep* the last 2 beeps are very fast.
The normal boot was only 1 *beep*
Can it be so tat the gfx is damaged or is it the agp slot on the motherboard thats not working right?
The system is this:
AMD Athlon 64 3000+ 2.0 GHz Socket 754, 512 KB cache, BOXED
MSI K8N NEO Platinum Edition S754 nForce3 250GB,SATA,GbLAN,ATX,Raid
Corsair XMS3200XL DDR-DIMM 512MB PC3200 32Meg x 8, CAS 2-2-2-5, 400MHz
PowerColor Radeon 9800 PRO 128MB DDR AGP, ATI 9800PRO, DVI-I, TV-Out, Retail
LG CD-brännare IDE 52x/32x/52x Svart Intern Bulk
Western Digital Caviar 200GB IDE ATA/100 8MB cache 7200RPM
Medion 19" CRT MD-1998PB TCO-99 Skärm, Silver
Antec truepower 440W
hope u ppl understand i took that from another forum i posted it on so sry for the Swedish words but i hope u understand and can help me.

ok i have tryed a TNT2 Riva in the computer now and it works wonderfull but with a lame gfx :(((
PSU. do u realy think that the Antec cant run this system???

MSI k8n neo (s754)

This weird, i've enabled dynamic overclocking and chosen "Captain" .. isnt this suppposed to increase the FSB? .. it's still 200 ..
msi k8n neo s754
a64 3200+

heya
the Dynamic Overlocking Technology is designed to overclock the cpu/fsb bus to cope with an increased load
i'm not sure what each of the "ranks" percentages are but
i think "commander" is 11%
therefore, when the cpu is under 100% load, DOT will increase ur FSB(HTT) by 11% to try n finish the job a little faster, i wouldnt recommend using DOT as it can be unstable for this reason
if ur running PC3200/DDR400 ram in ur pc at normal timings and have it set at Auto or 200 in bios, so its running 1:1 with HTT....if u use DOT, the memory will be overclocked as well to keep in sync with FSB(HTT).. now this will introduce new problems cos some DDR400 doesnt like being overclocked and will cause systems to hang or crash....i experimented tightening my RAM timings and cos its cheapo RAM i didnt get very far, too many applications were crashing
so i guess what i'm trying to say is, if u want to experiment with overclocking, i would highly recommend using the Cell Menu in the BIOS, its alot more friendly than just setting DOT to commander.
i loosened the timings on my RAM...and got it to DDR460 running in Sync with the HTT bus
and the bios is more fun to experiment with
i hope i didnt drone on too much
Good luck with what u decide on doing
mike

MSI K8N NEO Platinum Edition Low Benchmark scores

Hi, can someone please help?
I have these details of my friends new PC :
MSI K8N NEO Platinum Edition
AMD Athlon 64 3200+ 2.2 GHz Socket 754, 512 KB cache
Corsair Value S. PC3200 DDR-DIMM 512MB
I have run a sandra memory bandwidth test on it and I think he gets really low scores for his spec.
int buff'd 2657
float buff'd 2656
This is the scores he gets un tweaked and not overclocked. Do these sound like reasonable out of the box scores??
Any information would be appreciated

Quote
Originally posted by tritium4ever
Who cares, Sandra is a completely synthetic benchmark with absolutely no relevance to real world performance. Don't believe me? Put a 3.0C up against a 3000+ S754 with the memory bandwidth benchmark. The 3.0C will own, but the 3000+ will perform better in most real world apps. Bottom line: don't sweat the Sandra results.
not 100% true either beacuse if you then run encoding apps etc which are mem bandwidth dependant the 3C would own. it is not true to say they are not real world results, just games and most apps dont bottleneck on the mem bandwidth.....now that is will be different on 64-bit coding but of course the A64 would still own the 3C on them.
just for the record i would never buy an intel.

MSI K8N Neo Platinum Nforce3 250GB - PSU?

My sister in law have this board, MSI K8N Neo Platinum nforce3 250gb chipset, recently the power supply sounds noisy and a high frequency sound from the Antec Truepower 380W SP. Had maked an RMA to Antec and they had agreed to replace the 380W psu with SmartPower2.0 450W. But they asked me one question, that im not sure about:
"Make sure that your motherboard does not need the -5V. If you want more information on the power supply you can look at this link: http://www.antec.com/us/productDetails.php?ProdID=26450 "
So, do Antecs SmartPower 2.0 450W suits this board and what really is -5V for? As I read the manual, it said ATX 20 pin power connector: JWR1 and at pin 18: -5V
So does it mean this board need a psu that gives -5V on ATX 20 pin power connector and thos board can't use with Antecs SP 2.0 450W?

Quote from: syar2003 on 22-February-06, 05:10:37
Hi!
The K8N Neo Platinum (MS-7030) doesn't use -5v to anything.
So the -5v from the old atx spesification is not needed in your case.
WoW, thanks for fast reply!
So, it won't be any problem to use Antecs SmartPower 2.0 450W with this board then? Want to make sure about it, before accept Antecs offer for replacement and had spent over 4 days to find the problem with his computer. Really don't want to do it again.
This is his riggs:
Antec Sonata
AMD 64 3000+ S754
Corsair Value S. PC3200 DDR 512MB
Maxtor Diamondmax 9 250GB SATA
Maxtor Diamondmax 9 IDE 160GB
Sapphire Radeon 9550 Atlantis 128MB DDR
and
Accton ethernet card on PCI slot
MSI D-Bracket2
so
With the "new" Antec SmartPower 2.0 450W
Any problem with this rigg and PSU?
edit:
Dound this post that it said the board do need -5V and now Im confused?
http://www.archivaty.net/forums/about12964-30.html

K8N Neo Blank Screen on boot up... D-Bracket combo is..

The D-bracket led shows
red red
Green red
1-Green lower left = Initializing Keyboard Controller
Don't quite understand what it means... I left it on for about 30 min yesterday but won't do anything...
Mem: Corsair XMS4000 pro
CPU: S754 AMD64 3700+ OEM
Please help. Thanks

I'm having this exact problem which sounds the same as these 2 threads:
!HELP! Comp wont post!
Help K8N Wont start
I will try the advice in this thread when I get home, i.e. the "jiggle the handle" method that rocketman2047 says works.
If that doesn't work I will have to find some old RAM and see if that can get me to the BIOS long enough to change the setting to something more stable (I hope).
I just put this thing together last night and it booted up on the windows install CD and then it seemed to freeze up so I hit the reset and now I have an $700 machine that does nothing but beep at me.
K8N Neo Plat.
AMD 64 3000+ retail
Radeon 9800SE
2x256 OCZ400512ELDCPE-K
Unplugged everything else (even the case fans) to no avail.

K8N NEO PLAT - Onboard sound problems

I got a really confusing problem, maybe one of you could help me with...
My brother has s754 k8n neo plat motherboard and he has always used the onbard sound controller. Yeasterday we formatted his computer, and did a fresh XP installation. Since then i cant get the sound to work properly, only if i put the headphones in the "blue" input instead of the green. The sound is very low but works there.....I installed the latest Realtek Audio driver from the MSI page. According to windows the sound works perfect, no driver issues reported or anything...The mp3's start playin but theres NO sound....
Could it be driver issue? Updated to the lates BIOS also btw.
Appreciate all help, thx...

Hi, we are sailing on the same boat!
I am also facing the same problem recently with my K8n Neo4 Platinum Ultra. I have Win2K Pro, Win2K Server/ Win XP 2003 Server installed in my system.
I do not know, why such a typical problem exist with my system?
Any help from good techies shall be very useful.
Thanks.

K8N Neo-FSR v2.0 + Sempron 2800+ E6 = No Go?

Hello!
Wanted to assemble a rig for playing around with Ubuntu 64-Bit, so I headed out and obtained ...
... a MSI K8N Neo-FSR v2.0 (7030-20C, shipped with BIOS 5.10)
... a AMD Sempron 2800+ (Palomino, Step E6)
Upon power-on it refuses to POST ---> 1 continous beep
If I recall the AWARD beep-codes correctly this means that the CPU failed to initialize.
Troubleshooting steps:
- Stripped down to board + CPU + 1x RAM + GFX -> No Go (1 beep)
- Stripped down to board + CPU + 1x RAM -> No Go (1 beep)
- Stripped down to board + CPU -> No Go (1 beep)
Meanwhile I tested the CPU and RAM in in another S754 board a friend borrowed me ... both work fine.
So this leads me to the question:
Does anyone has a clue what might be wrong here? I don't have greater experiences with nForce boards so my knowledge about them is very limited.
Thanks for helpful suggestions.
-Storm

Quote from: syar2003 on 27-August-06, 20:29:14
This is the latest bios version of the 5X bios series (and should be a safe one since yours is currently running with 510).
http://download.msi.com.tw/support/bos_exe/mbd_bios/7030v54.zip
Don't know if it will add support for your cpu though.
Well ... as the changelog of the BIOS isn't exactly informative we would only know if I could get the board to POST so that I would be able to flash.
This however isn't a valid option as the board keeps on beeping upon power-on.
Quote from: syar2003 on 27-August-06, 20:29:14
Theese 7030 boards have become unbelievable hard to track as there are so many versions released now.
ref: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=688
This page also lists another bios series to use 1X and 9X series
In addition it lists 2800 E6 Palermo as NONE (which means not verified/under testing)
Direct link to many 7030 boards bioses are also gone .
You're right --- I did some more investigation yesterday and became award of the "too many 7030's" issue. The one I'm referring to is actually the one you linked at (K8N Neo-FSR V2.0).
As the sticker on the flash reads v5.1 I assume the board is PCB rev. 1 ... as the 9.x BIOS seems to be for PCB v3.0 only.
Took a look through the CPU Support ... and ... WTH?
Only Turion CPUs and one A64 (step E6) is listed as compatible?
Guess we found the showstopper ... either the board or BIOS seems to dislike the E6 Sempron then. Hmm ... guess I either return the CPU or the board. It seems as getting a Turion would be the better choice as the shops in my area don't have anymore AGP S754 boards (and the same goes S939 boards). I only need a rig to play with server setup-scenarios of Ubuntu 64-Bit and no powerhorse for gaming or such.
Thanks for pointing me to the CPU support list ... I would have never dared to imagine that a board will only run with a limited set of AMD CPUs ...

K8n neo + turion

i just emailed msi tech support about this, but i figured i'd get a bunch of people's opinions.
for everyone with a k8n neo platinum (s754), would you/do you want to use a turion in your board?
i'm looking at it from mostly an overclocking perspective. the 130nm mobiles got the best yeilds and overclocked nicely, and the 90nm process seems to give higher overclocks on average, so with some decent cooling and luck, these could get pretty far..
also at stock, these things are rated for 25w or 35w. this would be very conducive to having a small, quiet, yet very powerful htpc/sff to use.
so. who thinks msi should support the turion for the k8n neo?

bump and update. i also emailed newegg on carrying the mobile chips, noteably the turion, here's the reply i got.
Quote from: Newegg
We are currently in the process of carrying this item. We will post any information that becomes available on the website. If you have any further questions or concerns please do not hesitate to contact our customer service at 800-390-1119 or email us at [email protected]
the retail side of things are looking good then

K8N Neo Platinum nf3 250Gb SATA RAID question?

Hi all I'm ready to make the move to an AMD A64 setup from my currnet P4.
You all know what a tough job it is to find the right motherboard for an A64
After much research I think the K8N Neo Platinum is the board for me, but there's one question I can't find an answer too. So I'm turning to this forum. Thanks much for any help.
I currently run a dual RAID"0" setup. Two WD360 Raptors as boot array off the Si3114 on-board controller and two WD740 Raptors as a game \ power apps storage array off the ICH5R southbridge.
My question is; Is it possible to run this drive setup off the K8N Neo Platinum's 4 SATA controllers? Two seperate RAID"0" arrays with one bootable.
thank you-Mike

I decided to go with a S939 instead....I know me...and I'll want one as soon as I got the S754 up & running
I ordered a K8T NEO2-FIR...Its got the on-board Promise SATA RAID controller + on chip VIA RAID...so it should suit my drive needs perfectly

SATA port multiplier on MSI K8N Neo Platinum - NForce3 250Gb?

Hi,
I have a MSI K8N Neo Platinum, which uses a NForce3 250Gb chipset. I have read that port multipliers can use either SATA or SATA II hosts and drives, but I don't know if the technology is 100%, transparently compatible.
Is the aforementioned chipset/motherboard compatible with port multiplier technology?
Does it support FIS, which gives the greatest perfomance?
Does it need a BIOS or driver update?
Thanks for the attention
Brazilian Joe

Quote from: syar2003 on 22-February-06, 05:10:37
Hi!
The K8N Neo Platinum (MS-7030) doesn't use -5v to anything.
So the -5v from the old atx spesification is not needed in your case.
WoW, thanks for fast reply!
So, it won't be any problem to use Antecs SmartPower 2.0 450W with this board then? Want to make sure about it, before accept Antecs offer for replacement and had spent over 4 days to find the problem with his computer. Really don't want to do it again.
This is his riggs:
Antec Sonata
AMD 64 3000+ S754
Corsair Value S. PC3200 DDR 512MB
Maxtor Diamondmax 9 250GB SATA
Maxtor Diamondmax 9 IDE 160GB
Sapphire Radeon 9550 Atlantis 128MB DDR
and
Accton ethernet card on PCI slot
MSI D-Bracket2
so
With the "new" Antec SmartPower 2.0 450W
Any problem with this rigg and PSU?
edit:
Dound this post that it said the board do need -5V and now Im confused?
http://www.archivaty.net/forums/about12964-30.html

Help with K8N NEO 4 and AMD X2 3800+!!!

For christmas i got a new AMD Athlon X2 3800+ CPU. System Specs Below.
AMD Athlon 3800+ Dual Core CPU
MSI K8N Neo4 Sli motherboard, nforce 4 chipset
XFX Geforce 7800GT 256 MB PCI-E GFX Card
2X512 MB Corsair XMS 3200 Xtra low latency memory
Antec TruePower 2 550Watt PSU
Now, when ever i'm playing a game, at random time periods, the system will start looping the sound, and after a few seconds it will reboot. When it does this, the monitor will go into standby until it restarts,with the little amber light and everything. It does it more often on some games than others. The memory has passed a 24 hr memtest 86 with no errors, and this is the second psu i've tired and still get the same result. The psu in it right now is brand new. I dunno what to do. I'm tired of not being able to play my games b/c of this. The heatsink on the CPU is stock. Also on the graphics card. Temps never reach above 47C on the processor and 65C on the GFX card. Please help me.

I short of have the same problem.I got my pc about two weeks ago.
AMD 3800+ x2 Manchester E6 (Toledo E6 inCpu-Z)
MSI K8N Neo 4 Sli (came with 3.6 bios upgraded to 3.7 and 2 days ago 3.8)
Sapphire x1600 256 pci e
2x512 Corsair VS512MB400 value select(2,5,3,3,8 1T)
Tagan TG480-U01
The first day after a clean install i runned MSI Live update and it just froze (no other application running) force restart and then the hard disk was gone.Fixed it then updated all the drivers for mb graphics nvidia drivers AMD hot fix and M$ hot fix but still it just freezes.Today there were 2 one when i run MSI live update(??????) and another when using 3Dmark06(froze between tests).
Used memtest for 1 hour no errors no Oc althought when used MSI core cell Oc(bios) in comander mode froze in 1 min.Temps dont go above 41 42 (user mode 7/8 fan speed in core center when in Cool n Quiet temps reach 42 43 even 46 and it keeps the rpm near 1100 1200????????)when running games apps with stock fan.
Whats the problem

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Memory Corruption on K8N Neo Platinum - HELP!

I am having some problems with my cousin’s computer that I built for her last September. She brought me the computer because she got an error that the system32/config/system file was corrupted and couldn’t boot the computer. I got the file replaced and got the computer re-updated to where it worked. Then the same thing happened again. This time I did a Windows reinstall and the computer acted a little sluggish and iffy so I did a memory test. I found the memory was all corrupted.
First here are the pc specs:
MSI K8N Neo Platinum with 1.7 bios
Athlon 64 3000+
120GB Seagate SATA hard drive
NEC DVD Burner and Samsung DVD ROM
Radeon 9550
512MB Corsair Value Select 2.5CL DDR400
Antec 350W psu and Antec Case
I ran Memtest86+ v1.6 and the Corsair stick had errors in Test 3, 4, 5, and 7. In tests 3 and 4 there are 50 errors but at the 98% of Test 5, the errors jumped to 146,432 and they were 500.8MB part of the stick. I got the same results when I moved it to DIMM2 slot. I also get the same results when the HT is at 1x or 4x.
I tried a known working 512MB stick from my sisters Athlon XP 2500+ pc in the A64 pc. It is a Mushkin PC3200 Basic stick. I get errors only at 98% of Test 5 which amounts to 109,568 errors. Same results in DIMM2 slot.
But when I test the Mushkin in my sisters pc, it has no errors. But the Corsair stick in the AXP pc gets errors on Tests 1, 3, 4, 5 (only at the 98% mark), 6, 7, 8 but only a total of 317 (a lot less than 146,000 in the A64 pc.)
So, I know the Corsair memory is bad, but now something is also wrong with the motherboard and /or cpu right?
If you need any more info let me know. I’m new to the forums and they look very helpful.
Thanks.

Quote from: blazing storm on 23-August-05, 05:30:00
Look in the bios and loosen up the RAM settings. Make sure the RAM isn't being stressed into settings that are too hard for it to handle.
See I told you to loosen it up...
I speak from experience as the same happened to me and loosening settings stopped errors.
Glad you managed it, well done...

K8N NEO-V v2 s754

Similar Messages

Maybe you are looking for