K8N neo2: 227FSB? That's all i can get?!?

okay, i was overclocked at 233fsb when i first got the rig together, now i can only get 227fsb. Not a huge difference but i was hoping to hit 2.4 since ive read about other peoples successes with the setup very ssimilar to mine.
k8n neo2 platnm
amd64 3200
2x512 corsair xms pc3200
2xmaxtor sata drives raid 0
xp90 h/s
tornado 92mm fan 119 cfm!!
ati 9800xt
Hercules PSU 400W bios 1.4
SP2
Now the issue is it seems that i have hit a low ceiling compared with other similar setups, even in lower stock cpus like the amd64 3000 i have seen hit 2.5 with a water chilled h/s. im not looking for that but i think i can squeez out some more here from what i have read.
The problem is i dont know how to continue overclocking this machine. So far i have overclocked the FSB (227fsb x 10 = 2270) in the bios and oced the timings of the memory from 2T auto-auto-auto to 1T 2.5-3-3-8. And lastly i upped the voltages in the bios and in the core center.
however, when i set the vcore in the bios like say 1.5, the core center in windows only registers 1.42 -1.47 and fluctuates between those voltages.  If i up the voltage in the bios more the vcore will continue to rise, but not at the bios's numbers. The psu is posting lower numbers than i am prescribing in the bios.
So, is it the PSU or is this normal? Is this hampering me in getting a higher overclock becuase of these slight flucuations? Is that normal?
Lastly,  a freind of mine was trying to explain to me about changing the ratios of cpu:fsb, and if my board had the capability of doing so. I didnt see it anywhere in the bios so i am assuming not. Aside from not understanding how lowering the cpu or fsb and getting a better perfomance as a result out of the machine (im totally lost here) I want to know if i am overlooking anything else i can do to make this machine run faster, as we all are. I'm wondering if there is anything else i can do here. What am i missing?  

put fsb to smthn like 240 and then go to dim settings and put ddr160 instead of ddr200... that is what others refer to about fsb:ram ratio...
That way ur cpu will run at fsb 245mhz while memory will only run at about 205mhz... which still its over its normal 200mhz speed (frequency) also put up the vmem voltage to about 2.6 at start...
good luck
p.s. also do not use Core Center coz it sux... do all this in BIOS..

Similar Messages

  • What's up with Session timeout.  That is all I can get anymore?

    What's up with Session timeout?  That is all I get anymore with I Tunes Store.

    The fix was: Turn off Junk Mail filter
    quit mail
    turn on junk mail filter
    (and reset database for good measure)

  • I upgraded my iPhone 4S to iOS 6.0.1.  My Calendar sometime shows "No Calendars" but now that's all I can get.  My events are still in iCloud.  What should I do

    I recently upgraded my iphone 4S to ios 6.0.1.  Then my iphone calender sometimes would show "No Calenders" but closing and re opening a few times would get my calender and events back.  Now it only shows No Calenders.  I noticed in my settings that the icloud backup is turned off.  If I turn that on will my calender come back?  My events are still in my calender on the icloud website.  Any help appreciated.

    I have good news!!  I was waiting until I had adequate time to try this recommended fix in case I had any problems with it.  Then I decided to enter a new event in my Calender even tho it was showing "No Calenders".  As soon as I entered the new event my whole Calender came back!  Yeeaaa!  I hope this helps someone with the same problem.

  • Can't forward/reply or write/send an email. Can open and read but that is all. Can't close that page. Have to shut down and start over. Frustrating!

    If I want to forward an email, I hit forward, type in the name, tab to start writing something and am unable to do so. The page is outlined with tiny dots (as if it were perforated). When I try to close it down, a small box appears asking if I want to --Discard - Save as a Draft - Continue Writing -- It makes no difference which one I click on, none work. I have to close completely and open my email to continue reading my emails but that is all I can do.
    If I use Chrome as my browser, everything works fine. However, I like Firefox (other than your recent support of gay/lesbians - which is why my husband quit using Firefox and maybe I will too, now!)

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • How do I get an iPod touch to turn on other than the normal way. It has been dropped and all I can get is a blank screen. Have tried holding the HOME button down for 30 sec. but that didn't work.

    How does one get an iPod nano to turn on other than the "normal" way? This one has been dropped and all I can get is a blank screen. I have tried holding down the HOME button to restart it but no go. When I connect it to my computer, I am told to enter the PASSCODE which I cannot do as there is no touchpad.

    David ..
    Your topic refers to an iPod touch
    Then you say:  How does one get an iPod nano to turn on ......
    If it's an iPod touch, try a reset.
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, whether it's an iPod nano or touch, it probably needs service >  Apple - Support - Service Answer Center

  • What happen to my movie it disappear and what my song that partly What happen to my movie it disappear and what my song that partly down load . Is this all I can get for iTunes support! load . Is this all I can get for iTunes support!

    What happen to my movie it disappear and what my song that partly down load . Is this all I can get for iTunes support!

    No offence but how on earth is anyone meant to help with your problem when your post makes no sense and contains no information??

  • Is there no way at all I can get an older iTunes? :(

    I really hate hate iTunes 11, I've tried getting used to it I can't deal with it. I've tried to iTunes 10 back with no luck. I've uninstalled every Apple thing on my computer, reinstalled 10, and rebooted. I've done this twice now and I'm still getting this message "The file iTunes library.itl can not be read as it was created by a newer version of iTunes". I've tried repairing iTunes in the control panel as that was suggested to me but still nothing.
    Is there just no way at all I can get the older iTunes back? I have Windoes 7 64 bit.
    Thank you so much.

    No.
    tt2

  • HT4623 I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes

    I screwed up.  I was trying to SYNC and something (error msg) happened.  I tried to continue the SYNC and now my IPhone is dead.  All I can get when I turn it on is a picture, from bottom  to top, I have an WSB connector, an up arrow, and an iTunes icon.  I can't use the phone.  And it's my only phone.  What can I do to rectify this situation.

    It's telling you to connect to ITunes and restore your phone. This will have to be done with a USB cable and iphone connector that came with your charger.

  • I've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    i've tried to set up a new user on a mac book pro and i restarted it to create the new account but now all i can get is a white screen with the apple logo and the loading symbol what can i do ?

    Look at this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • I can't upload a copy I got of Adobe Photoshop CS on my Mac Mini OS X 10.5.8. All I can get for why is this  "This program cannot be run in DOS mode" I have no idea what this means?

    I can't upload a copy I got of Adobe Photoshop CS on my Mac Mini OS X 10.5.8. All I can get for why is this
    "This program cannot be run in DOS mode"
    I have no idea what this means?

    Are you certain the copy of Adobe Photoshop CS is for the Mac OS, not Windows?

  • Upgrading to yosemite the computer 27 iMac froze and now all I can get is a white screen

    Upgrading to yosemite the computer, 27 iMac froze and now all I can get is a white screen
    How can I move forward or revert back to mavericks?

    Look at this support article:
    http://support.apple.com/kb/ts2570
    Ciao.

  • My K8n neo2 wont overclock at all!! plz help...

    Hi, I just build my new machine, and after much problems I finally have it up and running at stocks speeds just fine, the problem is that I spent a lot of money buying Top-Brand components so I could overclock a lot, (I like It) but I cant seem to go upweard of 205FSB!! anything above that and the board wont boot at all forcing me to clear the Cmos!! I find this completely unaceptable for this board, being that my last board (an Msi one with nforce2) could overclock and athlon XP 2500+ barton all the way up to a 2800+!! Im really dissapointed at this, if someone could give me a few pointers as to what tweak in the bios (Im using 1.3 right now) it will be very thankful!!  ok, my specs are below, thanks!!
    Athlon64 3500+ socket 939
    Msi k8N Neo2 Platinum with 1.3bios
    2+512mb Crucial Ballistix pc3200 cl2
    BFG Nvidia Geforce 6800Gt
    36gb Raptor Hdd
    Enermax 420W power supply
    Thanks!!!

    I think your problem is your power supply. Check what that MAX amp on your 12V rail.
    I have nearly the exact same setup as you do and was unable to overclock the memory without lowering the memory timings much earlier than I expected too. For me I'm able to raise my FSB up to 207 at 2-2-2 timings. The max overclock I achieved was 220 X11 at 2.5-3-3 for a speed of 2420mghz. But it was not completly stable (it would bout but would lock up while gamming).  I had expected much better results than this... I bought good memory (Ballistix pc4000) I had a good 480W power supply... my processors ceilling should be around 2.6ghz. After reading this review on Anand Tech I think I found the answer... Athlon 64 Memory: Rewriting the Rules
    On page 10 they make the remark that their Antec True Power 465W power suply was limiting their ability to overclock memory.... The Antec True Power is rated to supply 22A on the 12v rail. My power supply is only rated to supply 18A.  I bet your 420W is rated even less.
    After reading that I fiddled with async overclocking and was stable up to 230FSB... then my hard drive freaked out... I was using sata port 1. I moved the hard drive to SATA port 4, but haven't tried much overclocking since.  Maybe if they put out a bios revision that I can adjust the HT on I'll try again. Until them I'm settled for running at 2277mghz.

  • How do I submit a private CD track listing so that other family members can get it?

    I have created a CD of family recordings to destribute to different family members. I want to upload the track listing so that they can get the info for their uploaded CD from Apple. The drop down Submit CD Track Listing is inoperative with either the album or the playlist selected, so how do I do it?

    elpianisto wrote:
    I intend to burn the playlist to CD as an Audio CD. Will the info be on the CD and become available to view when the recipient uploads it into his iTunes on his computer?
    No.
    You cannot add this info. Gracenote databse is not intended for personal cds such as this.

  • This is all I can get outta 1600+

    Have a 1600+ with k7n2l and this is best I can get. My memory is crucial pc2100. Should I get some better memory, pc2700 or better. Oh the chip is not unlocked. But I guess I really can't complain? 10.5x160

    Hey thanks Wonk, had my mem set to auto I think instead 1/1 so it was at 256. Set it to 5/4 and could not get a post at 10.5x160. But as you suggested I set it to 1/1 instead of auto and got it stable at 164x10.5=1722. But the plus is now my mem runs in sync with the cpu buss at 328 and seems stable. Hey I can't complain about a 322mhz o/c huh. Thanks again Wonk for that 1/1 tip. Running prime now and gonna let it go a few days. Guess I will live with it and save a few bucks to get 1700B and maybe some pc 2700 or better.

  • The tabs in OPTIONS can no longer be accessed - it opens to the history page and that is all I can reach.

    The options page comes in with the TABS inaccessible above the page level.
    The page cannot be moved, and I cannot access any other options page/tab.
    For one month
    Firefox 22 Windows XP Service Pack3

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

Maybe you are looking for

  • Mp3s in Library will not transfer to iPod

    Yesterday I used Real Player plus Audio Hijack pro to download a series of BBC comedy programs (from BBC7). The MP3 files were stored on my desktop. I double clicked each one and iTunes (v 5.01) opened and imported them into the library. I dragged th

  • Viewing clips

    Firstly when I open up Adobe Premiere I get a window that says, "We have detected an incompatible display driver. To get a better and faster playback performance, please update your display driver. Display driver details :Intel- Mobile Intel (R) 4 Se

  • Can you set bluetooth to AUTOMATICALLY authorise device

    Hi On my old phone I could go down my list of previously used bluetooth devices and select "authorise device" meaning each time my phone came in the vicinity or range of that device again it would automatically connect. I only use my bluetooth with m

  • Shared Services Registry and common settings (foundation)

    Hi Experts, I am trying to open shared serices regisry but surprisngly it is not available under start>programes>Foundation services>epmsystem (only digonostics is showing). Q1) Does we need to enable it from somewhere? Q2) if i make some changes und

  • Code not working

    hi, The below code is to ensure BE link to current Fiscal year. It works well but when I use this line (newconn = Folderpath & "\Data1516.accdb") instead of (newconn = Folderpath & "\File"). I have two fields in table named 'StartDate' = 2015 (value)