K8N Neo2: How much overclocking when using Sata-Drives ?

I understand that IDE-Drives have an advantage in achieving high FSB. Ist this in genral the case or is SATA as stabile when using them plain without RAID ?

I have a set of RAID0 SATA's.
On SATA1 & SATA2 I can run at a max of 201FSB
On SATA3 & SATA4 I can run at a max of 212FSB

Similar Messages

How much data is used when using facetime over 4g

How much data is used when using facetime over 4g. Say a 10 min call over facetime, will it use few MB or more.
Thanks,
Manish

It depends on how long you are on line. What you could do is reset your data usage in settings/general/ usage and then start your FaceTime session and check usage after your session

MOVED: K8N Neo2 Platinum resets overclock....

This topic has been moved to Overclockers & Modding Corner.
K8N Neo2 Platinum resets overclock....

Sorry about asking a stupid question.
Quote from: the_cultie on 25-May-05, 17:50:12
Are you using CoreCenter to overclock? What version is your BIOS? Post system specs.
Quote from: tahuru on 25-May-05, 14:24:45
the overclocking is done solely in bios.
Anyway, there seems to be different problems relating to waking up from sleep, I know that Cool'n'Quiet would stop working when I would wake up from sleep. I'll try overclocking mine a bit and I'll get back to you.
Also, check that the Save/Clear CMOS jumper is in the right position.

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?

Is there a way to find out how much data was used over the lifetime of my phone (cumulative cellular and wifi)?
I was just curious

Given that the phone doesn't track how much data is used over WiFi, no. And cellular data usage can be reset.

Kernel Memory limits. How much can it usefully use?

I just wanted to check something.
Obviously the Linux kernel can handle a lot of memory, but the question is how much can it usefully use before it needs to be specially compiled?
I need to build a server to clean email, and because it is very very busy, (well the last one was and so is its stand in) it will need 4GB of RAM as an absolute minimum but I would like to put in 8. If I go for 8, do I need to rebuild the kernel?
Kind regards
Benedict White

If you install Arch64 and use the normal kernel package -- no. You won't touch the RAM limit for some decades to come.

How much data is used uploading photos from element 12 to adobe revel

how much data is used uploading photos from element 12 to adobe revel

Rixonruss,
The size of your photos and videos you mark in Elements for upload depicts how much data is being uploaded. However for download, only small size previews get downloaded first unless you download the originals from Elements whenever needed in any Elements workflows.
If you have any Revel related queries, they may be answered at the FAQ link http://www.adobe.com/in/products/revel/faq.html
~V

HT204023 how much data is used by this method

I am in a remote community in Saskatchewan that has cell service. How much data does using a personal hotspot use on my iphone 4

Probably a lot, depending on what you're doing.
You can monitor it (roughly) by looking at Settings > General > Usage > Cellular Usage
You can probably monitor it more precisely at your cellular carrier's website.

How much data is used if i watched nba league pass on the phone

how much data is used if i watched nba league pass on the phone

As much as you use... really... how should we know? We're users.

How much ABAP is used in your entourage

Hi All,
I want to have a rough estimation of how much ABAP is used outside SAP.
As an ABAP community member, you may have answers for the following questions.
Which companies use ABAP ?
How many projects are developed or in development ?
What are the sizes of theses projects ? (no need for the precise size. Just say if the size is
many hundreds, thousands or tens of thousands, u2026)
Thank you very much for your help.
A.
PS. Links for any document which contains information related to the questions above, should be very helpful.
(I m asking for non-confidential information or already published)

3rd - SAP is the 3rd largest software company in the world
There are over 10,000 companies using SAP. There are millions of people using SAP. ABAP is a central programming language for SAP so each of those companies employs people who can code in ABAP.
I am a Senior ABAP Developer. I do a lot of ABAP and have created some very complex systems with it. Usually you are talking anywhere from 10 lines of code to a couple of thousand. Not tens of thousands.

How much is a used but good iphone 4?

how much is a used but good iphone 4?

It's only worth what someone is willing to pay for it. Probably not much because if the screen crack was caused by a drop, there could be some internal damage also.
What country are you in? There's some places to sell in the US.
 Cheers, Tom

How do I know how much space Im using in iCloud now ?

How do I know how much space Im using now in the iCloud. I would like to know before I change the storage plan.
Gale

Settings/My iCloud/Storage and Backup - Then subtract Available from Total Storage.

HT2173 How to know when a hard drive has failed ?

How to know when a hard drive has failed ?

Machine doesn't boot. You experience strange crashes. Gets wrong results. Your harddrive is five or more years old. Time to consider repacing it.   You do have backup?
You may want to run these "standard" fixes if the problem persists.
1) Check the amount of free space on your harddrive. You should have a several gigs free.
2) You should run disk utility
     a) verify the disk
     b) update your permissions.
3) Try a safe boot.
    Shutdown your machine. Hold down the shift key. Poweron. Wait awhile Wait awhile while you harddrive
      is being checked.
    http://support.apple.com/kb/ht1455
4) You may want to run applejack to clean up your machine.
     http://applejack.sourceforge.net/
a lot more ways to fix your Mac.
http://www.thexlab.com/faqs/faqs.html
verify & repair your startup drive
To verify & repair you file system on the startup drive, you will need to run disk utility from you installation DVD.
This article will tell you how to get to disk utility. Once in a disk utility, you can go and attempt to recover the disk.
http://support.apple.com/kb/TS1417
To repair your startup drive, you will need to run disk utility from your startup DVD.
Mac OS X 10.4: About the utilities available on the Mac OS X 10.4 Install DVD
http://support.apple.com/kb/HT2055
How to run disk utility from your startup DVD.
Insert your startup DVD into your reader. Power down your machine. Hold down to the c key. Power on your machine. This will bootup your startup DVD.
This will bring you to a panel asking you for your language. Pick your language.
You you come to the Install Mac OS panel. Do not install.
Click on Utilities menu item. This will give you a pulldown list of utilities.
Click on the disk utility.
You are now in disk utility. Pick your disk. Click on repair it should be on the lower right of the panel.
Once the repair completes successfully, you should update your permissions.
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.

How can i no which SATA driver do I need for Satellite L300-03C

How can i no which SATA driver do I need for Satellite L300-03C so i can do nlite

Hi
Your notebook seems to be a Satellite L300-03C PSLB8C-03C01X.
As already suggested in your first thread visit the Toshiba Canada page and choose this notebook model on the driver page.
http://209.167.114.38/support/Download/ln_bymodel.asp
Then download the Intel Matrix Storage Manager (SATA) - Floppy drive image. Its for Vista but the files in this package should work with Win XP too.
Include these files using nLite in order to create new Win XP disk containing the SATA drivers.
Finally use this disk for booting.

How much noise should the hard drive make on a MBP early 2011?

Had since May/June last year i5 13" and only since I applied all updates few weeks ago it seems to be louder than it was before?
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.

How much noise should the hard drive make on a MBP early 2011?
None.
The machine should only make noise if the Superdrive is being used or the CPU's heavily used, going by my Early 2011 17".
It sounds like a fan but isn't... obviously. Right hand side of track pad, and covering it, in fact just touching it dampens it to barely audible. Is that normal or has something gone a bit weird? A constant fan noise, which isn't the fan is now there permanently.
It's possible it wasn't installed correctly and/or the case is slightly off so it's resonating the hard drive vibrations.
Make sure you have a internet connection (don't move) and reboot the machine holding the d key down like forever and Hardware Test will run.
Backup your data off the machine, if the hard drive dies under 1 year or three years with Applecare, then go get a new one. else you can replace it yourself with a better one and not void your warranty if you don't break anything doing so. Add more RAM while your at it.
http://eshop.macsales.com/installvideos/
As you know Mac's are made by hand by young Chinese women working 12 hour shifts performing the same function every 7 seconds for only $1.20 a hour. They live 7 to a box room and have to pay 70¢ a meal.
All in all I would say they are very tired, and it's possilbe a few defects made it to your machine.

DatabaseMetaData.getTypeInfo ()=NULL when use JDBC Driver 9.2.0.5

Why DatabaseMetaData.getTypeInfo () is NULL when use JDBC Driver 9.2.0.5 to connect Oracle 9.0.1.1.1 database?
In the following links
http://www.oracle.com/technology/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm#02_02
the segment "Which JDBC drivers support which versions of Oracle Database?" tells us that JDBC Driver 9.2.0.5 can support Oracle 9.0.1.1.1 database.
thanks!

ERROR --- java.sql.SQLException: ORA-01722: 无效数字

K8N Neo2: How much overclocking when using Sata-Drives ?

Similar Messages

Maybe you are looking for