K8N Neo2 Paltinum and Zalman CNPS-7000B

Simple question: Does it fit? Thinking of buing one, but can't find the info, whether it fits or not.

There are two versions of this product
1)Zalman CNPS7000B-Alcu
2)Zalman CNPS7000A-Alcu
I was wary as I had originally specced 2) 4 my rig, it seems that 1) is the latest version. Only diff i picked up is that 1) is slightly lighter with different fan controller. Fitting remains same. 1) was only one available in uk when i woz buying bits.
Zalman

Similar Messages

New K8N NEO2 PLAT. and SC-939 3200+ help needed...

Hello,
I have just upgraded my system with K8N Neo2 Plat. and sc-939 3200+ A64 Cpu.
There are several issues I need to resolve which are:
1- Although I change from BIOS the settings for AGP to 4x8x and enable fast writes, I still cant see them turned on from the Catalyst Control Center. Everything is greyed out what can I do? They all used to be on and agp was 8x with my K7N2 Delta board....
2- Although I installed the original drivers from the MSI CD, I couldn't get one of the network prts to install. Realtek installed OK. But other one is defined by the device manager as standart network adapter. What can I do?
3- I am brand new to A64 system so I do not know what setting to use from BIOS can you help me out, for instance there are values for HT such as x3 x4 x5 mine is set to x5? what is this? should I enable cool and quiet, I am not intended to do overclocking. Can you give me some tips for best performance?
My best regards.

Make sure your bios is up to date: version 1.5. Look at the sticky threads and use the information to enable hidden bios features. Disable ATI/NV speedup in the bios. Uninstall your drivers and reinstall. If the information is still greyed out, download the free version of Sandra here: http://downloads.guru3d.com/ and check the module under video system information. This will tell you if fast writes are enabled and your AGP setting. Leave the HT(hyper-transport) set to 5X unless you plan on oc'ing, if you do oc then may find you'll need to reduce it to 4X or 3X. Try downloading the latest driver for your network from the MSI website. Right click the device in device manager and select update, select specific location then "don't look...I'll choose", direct it to the file where you've unpacked the correct driver and then update.

K8N Neo2-F and Floppy

Hi All,
Just install a new mobo (K8N Neo2-F) and all is good, but I want to update the bios to fix the USB 2.0 problems. I just ordered a new Sony floppy drive and installed it. When I turn on the computer the green light stays on the floppy and it never gets detected (WinXP x64). I checked the power and it's in right and the cable is installed correctly. I did notice that the floppy connector on the mobo is missing pins. Is this by design on this board? Also, I tried booting from a usb floppy to no avail. Is there something I'm missing? Thanks for your help.
Matt

floppy cable always missing some pins but make sure that pin 1 (red) is on the correct side (see instructions that came with the floppy). You may need to enable FDC (floppy drive controller) in bios. You may need to enable USB boot in bios also if that is what you want to use, but this could create other issues I think. Good luck.

MOVED: K8N Neo2 - WinXP and Raid driver problem

This topic has been moved to AMD64 nVidia Based board.
K8N Neo2 - WinXP and Raid driver problem

Quote from: SillySider03 on 18-June-05, 22:18:50
Try This.
Yes it worked... I did it a bunch of mins ago, ty a lot anyway

Msi k8n neo2 platinium and plextor 716SA - Serial-ATA

Is anyone using a the msi k8n neo2 platinum with a plextor 716sa dual layer dvd burner? if so how do you like the dvd burner? and Do you have any problems with it working with your computer? and can you boot from that dvd burner if you need to reinstall windows xp?

Hi mate
I am trying to use this same drive on my K8N Diamond mobo. It's having none of it.

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

MSI K8N Neo2 Platinum and seagate sata2 500Gb

Hi all,
As per subject, when the drive is connected to my computer it does not get passed the boot screen as all it keeps on doing is rebooting its self,
i have checked all my bios settings and all is as it should be, also i would like to mention that i already have 3 other sata drives connected to this motherboard, of which 2 are, 160Gb Seagate hard drives, and 1, 30Gb Weston digital hard drive, and they work perfectly,
I have also tried unplugging all the drives and just trying the new one, and setting the jumper to limit to 1.5Gb/s but still all it does is reboot, do you think the drive is faulty?
Thank you

Quote from: Chippy99 on 21-May-07, 21:51:09
Seems strange. I have a Seagate sata2 500GB (ST3500630AS) hooked up to Sata port #1 on my K8N Neo2 and it works perfectly. I have found it to be *very* intolerant of overclocks though.
What sata port are you connecting to? And are you overclocking?
This could be the problem ..... SATA ports 1 & 2 on the nforce3 boards are NOT locked. I only use 3 & 4 plus set your AGP clock to 67 or 68 to be safe (this is supposed to lock the PCI bus but only seems to work on SATA 3&4). Of course, this won't be a problem if you are running at Safe Default settings.

MSI K8N Neo2 Platinum and Speedfan configuration

I'm hoping someone else with a similar K8N Neo2 setup can compare Speedfan notes with me. I'm trying to figure out what maps to what, here's my best guess. Let me know if your best guess differs.
Temp1: System / Case temp
Temp2: CPU
Temp3: Northbridge
Local Temp: CPU Socket sensor
Remote Temp: nvidia 6800 GT GPU sensor
Fan1: Northbridge
Fan2: CPU
Fan3: no sensor
PWM1: Fan1/Northbridge speed control
PWM2: Fan2/CPU speed control
PWM3: Any ideas? I'm hoping this controls voltage for at least ONE of the fan headers on the motherboard, so I can control my case fans. If anyone knows, please fill me in.
Thanks!
Rich

C'mon people, doesn't anyone have more info about this subject? I have everything figured out but speed03 and or fan03. I can not seem to control my case fans, only my CPU and northbridge work. I have 2 of my case fans plugged into the mobo and are reading 2700rpms but I can't slow or speed them up no matter what I do. It would be nice to have the system fan controlled my case temps just like the CPU fan is
Is ther something in bios I have to enable or something?

MSI K8n Neo2 platinum and drivers chipset, 5.03 or 5.10?

Hello,
J reinstalled my K8n neo2 with XP SP2, A64X2 4200+, XFX 7600GT ....
On MSI website there is 5.03 drivers for this motherboard. There is no 5.03 on nVidia website drivers archive?
On nVidia website there are 5.10 and 5.11 drivers. j look here that 5.11 is not very stable.
So, what is the best: 5.03 or 5.10?
Excuse j write not very good english!
Thank.

The 5.10 works fine - 5.11 has cause network problems for most people. There are better (V4.79) IDE/SATA/RAID drivers available if you want to do your own mix: DL the 6.37 Beta from here http://downloads.guru3d.com/download.php?det=971 and replace the IDE subfolder in the C:\NVIDIA folder from unpacking the 5.10 nVidia driver pack with the IDE folder from the 6.37 Beta, then run the Setup.Exe in the 5.10 subfolder. 6.37 Beta was nVidia's early attempt at a unified nForce3/4 driver pack but they gave up the unified idea without ever publishing one. There may even be better "mixes" available but this works for me and I've been running a RAID-1 with them for 2 years now with no faults.

MSI K8N Neo2 Platinum AND SATA2

i have MSI K8N Neo2 Platinum motherboard with 3500+ cpu and WD 160 hard sata disk.
I 'd like to ask if my MSI K8N Neo2 Platinum motherboard support sata2 hard disk drives, in order to know which HD to connect as a second HD drive, SATA or SATA 2 ??

It'll see SATA2 as regular SATA. You won't loose any speed either. There are no hard drives that actually benefit from SATA2 spec speeds. Well, maybe in isolated near theoretical benchmark cases one current model might be faster in SATA2 mode.
We just haven't got the technology yet.

MSI K8N Neo2 Platinum and Venice E6

Hi!
I have just bought an MSI K8N Neo2 Platinum motherboard and an AMD Athlon64 3000+ processor with Venice E6 core (ADA3000DAA4BW).
Will this mobo boot with that processor? Or do i have to use a Winchester to flash the BIOS first? Personal experiences would be helpful!
Andres.

Your new board probably came with the 1.9 bios. The new 7025v1B.zip bios (1B only a couple days old) I think is for some of the new X2 AMD Processors. The MSI link to Products/Mainboards/Neo2/Processor Compatibility is now setup to use the 7025v1B.zip bios. As I recall the previous Processor Compatibility Chart for 1.9 bios was OK for all the Venice cores (E6 or not). I think it is only some of the latest E6 bigger models are affected by the latest 1B bios. Maybe someone has the older 1.9 bios Processor Compatibility Chart.
You shouldn't need to use a Winchester, some X2 processors would be recognized as earlier X1 models until the newer bios was installed. I think you should be OK with the 1.9 bios. I have the San Diego 4000+ and my board, one month old, came with the 1.9 bios installed.

Msi k8n neo2 platinum and corsair cmx512-3200LL

is anyone using the corsair cmx512-3200LL with the msi k8n neo2 platinum or any other motherboards? if so how well does that memory overclock for you?

LL used winbond CH-5 or BH-5 or Infineon B-5 depending on revision .
And everybody knows that it's hard to overclock winbond very far without excessive vdimm increase (2.9v - 3.4v).
Corsair XL use samsung TCCD and overclocks much easier when having a motherboard with a vdimm limit at 2.85v.
xms 4xxx also use samsung (TCCC or TCCD) and some versions use hynix D43/D5
so you can't directly compare xms3200LL with the others .
You can query RamGuy about the chips used on the spesific modules here :
http://www.houseofhelp.com/forums/showthread.php?t=35940&page=1&pp=15
Note the Part , version , and lot number before posting .

These ATI cards 9500 Pro and 9700 Pro ok for MSI K8N Neo2 Platinum and winchester cpu? Compatible?

Looking at grabbing a used ATI 9500 Pro or used 9700 Pro AGP card for my MSI Neo2 Plat since I can't use my Matrox G400.
Any problems using either of the above cards? I don't play a huge amount of 3D games so I'm not going to grab a 9800 Pro or XT or 6600GT. A 9500 or 9700 Pro would allow me to play the newer games at reasonable resolutions. Just want to make sure they are compatible.
thanx

Ok guys, thanx for the feedback. I missed the 9500 Pro sale, so maybe its for the better. If I'm going to try a bit of 3D gaming, I may aswell get a little bit better card. So here is my question for you folks:
For my MSI K8N Neo2 and AMD64 3000+ system, I want a card that will have good 2D output and good DVD playback. I want to try some 3D games, but don't want to have the minimum. I was looking at used 9500 Pro's and the 9600 XT but I've come across a used 9700 Pro and a 9800 Pro and 9800 Pro with r360 core (almost a 9800XT). So if I get a 9700 Pro, what will I be able to play smoothly at what settings and what will I be unable to play. Ultimately, I may play mostly on my projector at 858 x 484, so maybe the cards don't matter too much. If I don't play 3D games much after a while, I'll probably downgrade, but I want to give it a try. I can't afford a new 9800 Pro/XT or 6600GT.
Used cards I'm deciding between. Have to act fast.
9700 Pro $170 CAD or 9800Pro $210 CAD or 9800 with r360 core $230. Price differences between the cards is as you see there.
thanx in advance for any feedback,

K8N Neo2 Plat and 1.B0 - No BIOS Setup Screen

With K8N Neo2 Platinum (MS-7025):
After flash to 1.B0 version, from 1.90, boots normally. But, hitting Delete key to go to BIOS Setup, all I get is a blank screen with a white cursor in upper left - Won't go to BIOS Setup.
Went back to 1.90 with no problems.
Is this a known problem with 1.B0 version?
Papa_K

http://homepages.nildram.co.uk/~chsmith/Syars_Bios_Collection/NEO2/
It's 70251b0.zip. A modded version of 1B that you can reach thru the above thread found in Syar's sig.
Let us know if it works for you too.
JB
EDIT. I recommend winflash. Don't use liveupdate.
If you loaded live update on your computer then you have winflash. Go to C:\Program Files\MSI\Live Update 3\FlashUty\Award but use it carefully, shutting down all other programs and selecting the boxes to clear cmos etc. as described here:
https://forum-en.msi.com/index.php?topic=86257.0

K8N Neo2-FX and Promise Ultra133 TX2 problem

Hello there,
I got a couple of Promise Ultra133 TX2 IDE controllers that i want to use on my K8N Neo2-FX. However, when i try to boot windows, the system either hangs or just reboots, unless i disconnect the drivers from the Promise card(s). What can be wrong? Is it some kind of IRQ conflict? It all works perfectly in Linux, but Windows refuses to boot it. The installer won't start either if i got drives connected to the card. It boots however if i have the card connected, but no drivers connected to it.
I would imagine this is some kind of BIOS issue, but i haven't found anything about it anywhere.

Well, You´ve already got one link.......
http://www.swjka.com/neo2/view_thread.php?fid=39&tid=150
Other links for Neo2 Platinum :
https://forum-en.msi.com/index.php?topic=59711.0
https://forum-en.msi.com/index.php?topic=84865.msg606175#msg606175
http://www.msi.sploitz.com/
About Neo2 Platinum bios works with Neo2-F or Neo2-FX - I can´t say.
Basically it´s the same bios and chipset for Platinum and F model.
Official 1.B bios name is for all three models.
It will be on your own risk, unless you google around or search the forum for some info about it.

K8N Neo2 Paltinum and Zalman CNPS-7000B

Similar Messages

Maybe you are looking for