K8n neo2 Plat 54G, allround WLAN card

Does someone know if the WLAN PCI card provided with
the k8n neo2 Plat 54G will work in any other PCI slot
on any other motherboard? Reason I ask is the orange
colour slot on k8n Neo2, which is 'reserved' for the
WLAN PCI card, hints to be some kind of conditional slot?
I have a wireless network at home, but not using the k8n
wirelessly, but some other boxes could.

Sorry to bring up an old thread, but figured someone might have use of this info.
As an update, a good while back I put this WLAN card in an ECS VIA KM266 board, seemed to work, but was not too pleased with its performance or the SW MSI had along with this card. So I used another wireless solution instead.
Today decided to see if any new drivers around for this card.
The wireless chip on this card is a RT2500 by RaLink.
Looked up at their website and found driver version 3.2.0.0, date 26-Oct-2007.
http://www.ralinktech.com/ralink/Home/Support/Windows.html
This driver appear to work OK, the connection stays up, even at weak transmission conditions. The speed is not amazing but works. I assume it works reasonably well under good signal conditions.
EDIT: new version posted, version 3.2.0.10, date 12-Feb-2009.
http://www.ralinktech.com/support.php?s=1

Similar Messages

K8N Neo2 Plat : how to switch the provided PCI Wifi card to access point mode ?

in digicell, I can't click on "access point mode"...
do some people have succeeded in turing the neo2 plat 54g into an access point ? If yes, how ?
thks

I also have downloaded the latest driver from the manufacturer of that wifi special card (code 2500 something if I remember well)
have you found any way to configure it to access point mode, else than with DigiCell ?
I think I will reinstall DigiCell one more time and reinstall it, I'm almost sure the problem is in it ;-)
I already has problems seeing my Acrobat Suite and tells me I don't have the Reader, it already opens IE in stead of the default browser [but it's supposed to be that way, according toi MSI], and it didn't detect CoreCenter I ghad installed previously, until I reinstalled CoreCenter over itself ;-)
What a nice tool :D

K8N Neo2 Plat - Is 1.8 still the best bios?

Just bought new gfx card - Sapphire X1600Pro 256MB AGP - for my K8N Neo2 Plat setup (see sig for the rest).
I was getting 3dmark03 scores of 4400 to start with, then it has upped slowly to just over 6000 thanks to the various BIOS experts setup guides. I haven't found the Shgift F2 menu - is that only in later BIOSes ?
I'm only at BIOS 1.3 due to it's amazing stability with this setup, but now of course, I'm wondering if upping to, say, 1.8, might help improve things further ??
TIA

Hello !
The 1.8 bios is very good unless you are planning to run/update to an X2 dual core , then you will need a newer one for sure.
There is nothing faster and better with 1C , EasyBios 1C and my modded have better default values set in it ,EasyBios
have also better reworked layout (more user friendly) , but if you don't have any problems with your current one I would stick with it .
It's almost the same with my Neo1 system (Ms-7030) , I have this frozen at the 1.5b6 bios - with the Newcastle cpu in it
it actually works worse with the latest BIOS

NVidia Video Driver Causes Immediate freezing upon loading to desktop (K8N Neo2 Plat)...

after many a reinstall, order of loading drivers, i have finally traced my system's problem to the nvidia video drivers. i have no clue what to do. install everything (new nforce drivers, sp2, audio and ethernet drivers, windowsupdate, etc. EVERYTHING except running the nvidia video drivers package and the system does not freeze.
as soon as the video drivers are loaded, restart and once i get to the desktop it freezes. every single time. go into safe mode, remove video drivers, restart and the system doesn't freeze. fast write is disabled. all dram settings at auto. cool and quiet disableed. system specs are:
MSI K8N Neo2 Plat MB (bios is v1.3)
AMD64 3200+ Winchester Core
BFG 6800GT OC AGP Video Card
2*512MB Mushkin Dual Channel Blue Ram (2-3-3-6-1T at 200Mhz)
120GB WD Caviar 7200RPM 8MB Cache IDE HD
NEC ND3520A 16x DVD Burner
CoolerMaster Wave Master Aluminum Case
Coolermaster RS-450-ACLY Power Supply
any ideas?

well i'll be damned. spread spectrum. it was spread spectrum being enabled. there just isn't a more satifying feeling that thinking you figured out what was causing freezes and then finding out it's repeatable!!
spread spectrum on. freeze. reboot. freeze. reboot. freeze. spread spectrum disabled. reboot. no freeze. reboot. no freeze. reboot. no freeze. spread spectrum back on. reboot. freeze. reboot. freeze.
i love it.

Boot failure - k8n neo2 plat

Hi, I'm having trouble
Just purchased an MSI k8n neo2 plat mobo with an amd 64 3000+ and finally got her all setup... well minus the geforce 6600 gt arriving tomorrow and I still need to figure out what I'll do as far as memory goes. Ah but I forget myself... the problem at hand is this; I am unable to boot the system and the d-bracket indicates its current status is "Processor initialization..." Then nothing. Blank screen.
LED's btw:
red green
green red
thanks for any help
Sytem specs:
k8n neo2
amd xp 64 3000+
geforce 2 mx
1x mushkin pc2700 256mb (test mem)
60gb maxtor
generic cd-writer
PS is @POWER 430w with:
+3.3v = 28a
+5v = 40a
+12 = 17a

1)I'd go further than shturmovik in your 12v amps requirement you need at least 24a especially with your new graphic card.
see Basic Building Tips - Quote
As this pertains to A64's make sure that you have a power supply that is either approved for use by MSI/AMD or that you have plenty of amps on the 12 volt rail. Typically we have noted many issues based on stability with PSU's being rated at less than 24A on the 12v rail.
Power Consumption: NVIDIA vs. ATI
2)The D-Led Quote
Processor initialization
also covers memory issues as with the 64 the memory controller is on the CPU.
as your 1x mushkin pc2700 256mb (test mem) this rules out any dual channel problems.
which slot is it in.

Freezing issues with K8N Neo2 Plat & 6800 gt

Well I get random freezing during games. Sometimes it freezes for 5-10 seconds then comes back, while other times it just freezes and the sound comes back but not the game.
I had this problem when I first upgraded.
K8N Neo2 plat
1gb corsair xms 3200
athlon 64 3500
aslo have:
420-30? antec tru power supply. I cant remember exact number.
6800gt ultra
audigy 2 plat
Now I first posted my problem a while ago and someone told me to try chaning the HT to 4x instead of 5x. So I did and it worked. It worked for a few weeks and now the problems have come back.
Any Ideas?

Along with the above issues, I've also found that a lot of my gaming probs with the 6800 are due to it being a "bandwidth hog" & it's latency needs to be adjusted lower to enable the other devices on the PCI bus (i.e. sound card) to get enough bandwidth to function properly. This isn't noticeable until you start some heavy gaming with a lot going on at once...
If your game ever practically chugs to a halt when a lot of sounds are being produced, this is the main problem. Here's a way & some notes on how to deal with it. Just like every "tweak" though, it's not guaranteed to work for everyone but I got noticeable benefits from it.
- D/L (I got it @ guru3D) PCI Latency Tool & give the "Read Me" a quick once-over. Write down the values for your devices, in case you need/want to change 'em back. Most items are well labeled - the 6800 & your sound card will be what you are most interested in. I wouldn't mess with the rest of 'em, as they deal with low level system items that are best left alone. Unless you are truly an Uber Geek!
- The latency for my 6800 listed as a massive 248 clks! For some reason, I've read that ATI cards don't default at such a large value, which might explain why people don't seem to have as many performance issues with 'em. Anyhow lower the 6800 to a more "reasonable" value, like 128 or 64. 64 seemed to work best for me.
- Save the settings, reboot & test it out. You can experiement with the sound card latency too, in order to find what works best for you, but I wouldn't set it at less than it's default value (32).
Hope this helps.

K8N neo2 Plat problem with Inno3D 7600GS AGP, help pls...

Just got the new Inno3d 7600GS AGP card, after installed & while booting up my monitor keep going off and on then suddenly just went off...sometime system freeze when it reach deskstop.
Sometime lucky enough it will still there and the next few minute the system just freeze.
After several attemp & no choice, I unplug the power to the graphic card and the problem still exist.
I am using a HEC 350W PSU.
I change back to my old ati9200se card & no problem at all.
I changed to skyhawk 430W still same problem. even I boot up to safe mode still the same. Only time the monitor wouldn't go off untill it pass the winXP logo then the problem appear.
I got no problem when go to CMOS as well.
Already perform uninstall previous video driver, update latest nforce driver....all no use.
K8N Neo2 Plat
HEC 350W
2 harddisk (1 SATA & 1 IDE)
Any idea guys?
Thanks

What are your PSU amp for the +12V? What bios version are you using right now? Tried to disable the fast write in the Bios? Gd luck.

K8N Neo2 Plat - No start beep...

Hello,
Does anyone finaly found why with the K8N Neo2 Plat board sometime the puter wont beep and start? Need to shut it down and try a few time before it does beep and start the puter? Basicaly the problem is that when you start the computer you should hear a beep then you will see something in your monitor screen such as drive information, cpu speed and memory then it will search for cd, floppy boots and then windows will start if no boots are found but there is no beep and nothing appear on the screen then you have to shutdown the puter and try a few reboot then somehow it decide to beep and start...
I've read many thread and I tryed this so far:
-Removed Keyboard and mouse
-Tryed to push harder the video card in its slot
-Tryed to push harder the memory in their slot
-Tryed to push harder the sound card in its slot
-Tryed to push harder the LAN card in its slot
-Tryed to start the computer without the monitor
-Tryed to remove all my additional fans to give more power.
-Tryed to reinstall Windows XP SP2
-Took a look at the cpu and cpu fan
-Changed my video card for a new one
-Tryed to remove memory and it only does a long beep and no system start at all. (which is normal)
-Removed Spectrum, aggressive timing in bios, no overclock setting also.
I have tryed all these and still have problem starting my computer. Is it a motherboard problem? a Power supply problem? a Cpu problem? A memory problem? If anyone can help to find out it would be great!
By the way maybe its because im not english but I dont know what PSU mean, can anyone tell me? Thanks
Sorry for my english!

You might want to try a better PSU as the Antec SL400 does only 18amps....
It's overloaded at 23A....see the specs....
Spec of the Antec SL400

K8N Neo2 Plat - computer wont boot. RMA?

as the title suggests, I have a K8N Neo2 Plat with an amd athlon 64 3800+ and 2x512mb OCZ PC3700EB Platinum ram. Everything has worked great for the past year. However this weekend when I came home from school my pc wouldn't boot up. I plugged in all the cables, turned on the PSU, and hit the power button and the fans spun for about half a second then nothing. I tried again several times and the fans didn't even spin. I tried several plugs in the house, still nothing. Thinking it was the PSU (Antec NeoPower480) I bought a new one today and tried that. Still nothing. I even tried shorting the power switch on the case in case it's stopped working. still nothing. I'm quite knowledgeable about computers so it's not a silly newbie mistake. A friend of mine who does computer repairs thinks it's the motherboard, and I agree.
I was going to try RMAing it - do you think I should, and is the process relatively easy/painless? (FYI I'm Canadian)

Strip it down to a basic setup, CPU, 1 stick of ram (try different ram) and graphic card. This is all you need to boot and get into BIO.
If you can get into BIO then add one device at a time until you find the faulty piece, if you are not able to get it to boot then pull the graphic card and try to boot, you should get some beeps, do the same with the ram. If you don't get any beeps then it is a good chance it is your MB.

K8N Neo2 Platinum 54G BIOS problem

I recently bought a MSI K8N Neo2 Platinum-54G mainboard with W7025NMS v1.3 092204 revision of BIOS.
AMD Athlon64 3000+ 939 is installed on the mainboard, with 2x512 GEIL PC3200 memory modules in dual channel configuration working on default frequency of 200MHz. CPU is recognized correctly as AMD Athlon64 3000+ on startup.
Mainboard’s BIOS seems to be corrupted. In Cell Menu options, in the upper left part of the screen (printed blue) are processor and DDR working timings:
Current CPU Clock 1810MHZ, Current DDR Clock 200MHz.
Aggressive Timings and Dynamic Overclocking values are [Disabled] (processor working on its defaulf settings); Spread Spectrum is [Disabled] while all DRAM Configuration settings are set to [Auto].
While entering HT frequency settings, (locked to [x5]) there are no other values to select – empty, and there is no way to leave it (ESC doesn’t help, the only thing possible to do is to reset the computer by pressing the Reset button on the chassis), but the HT frequency settings were enabled when I loaded Fail-Safe settings, offering [1x], [1.5x], [2x], [2.5x], [3x], [4x], [5x].
Adjust CPU Ratio settings offer only [StartUp], [x4]~[x9] values, but as I understood by reading the manual there should be [StartUp], [x4]~[x20].
CPU Voltage, Memory Voltage and AGP Voltage are set to default.
CPU-Z, as well as SiSoft Sandra 2004 and SiSoft Sandra 2005 and MSI CORE CELL show that processor works at a core speed ~1005MHz, showing multiplier locked on x5.0 and HTT locked at ~200MHz, while the voltage is ~1.05V!
I downloaded the latest BIOS revision (v1.4), did the BIOS flash, but the problem remains!
Anybody, help!

Quote
HT frequency
is a known fault in bios & is easily sorted Bas HT Bios Error
Quote
CPU Ratio settings
AMD64 CPOU's have a lock on CPU ratios which varies according to the specification of the chip. therefore the multiplier available in your bios stops at the max multiplier allowed by amd for your cpu.
As an example i'm running a 3200 754 which has a maximum muliplier of 11 so that is the max i see in bios.
this guide may help Bios Guide

MSI K8N NEO2 Plantinum 54g, Fails to Boot.

It has only been problems.
HK: MSI K8N NEO2 Plantinum 54g
CPU: AMD64 3200 Winchester
PSU: CWT 350 W 12=16A , Chieftech 360W 12=18A.
RAM: Corsair PC3200 XL Pro, have been testing with other corsair and Kingmax.
I have been trouble shooting for about 14 Hours now. But the pc just dont want to work. The thing that happens is that i turn it on. Then it turns it self off randomly. Sometimes after 5 sec hen 20 sec then 15 sec ect ect. I cant even get into Bios. Well have been into it for about 1 sec , doesnt help much.
I could think it is the ram but it works in other computers so does the powers. But if I use the Xl Pro Ram then the screen is showing and it lasts never more than 20 sec. With other Ram it goes forever but i get no picture on monitor. And the speacker goes like Beeeeep, Beeeep Beeeeeep, Beeeeeep Beeeeeep. I have Flashed the bios to the 1.3 version, with Hotswap. But it didnt help much.
And by the way the Zalman CNPS7000BCU its metall backplate does not damage the HK because the hole under is to Big.

Hi !
Well, I have that problem, too. I think the reason is a new RAID-BIOS-Version built in the BIOS-Update. I´ve tried the beta-versions V1.51 and V1.5X, too - but they won´t run anyway.
My WinXp hangs while booting (before the WINDOWS-XP-Logo appears, or while fading in...). I cannot reinstall Windows completely because, when I install the 2 raid-drivers, the installation routine hangs before the licensetext - when I don´t install the drivers i cannont install on the raid-drive (beacuase the installation routine shows 2 hdds).
I think, a new driver will solve this problem, but I don´t know where to find it....
A.

Looking for cheapest ram to go with the k8n neo2 plat

looking for the cheapest compatable 1GB dc kit for the msi k8n neo2 plat
any suggestions

Yea,
I gotta give a shout out for the Corsair Value Select series also. I ran it for years in cheap systems I built for friends without any problems at all. Newegg has it pretty cheap (under $100 bucks).
I think their cheapest starts at 79$ bucks for DDR400
http://www.newegg.com/Product/Product.asp?Item=N82E16820145440
good luck
doggy

Unidentified 10-12Pins inside the K8N Neo2 Plat

Hi guys,
I've just finished setting up my K8N Neo2 Plat into the case with the jumpers and cables etc. And there's sometihng interesting I discovered.
There is a set of jumpers or Pins, just above the JDB1 [D-Bracket pins] that seems to be unused and un-labelled in the Instruction manual.
The PCB has it labelled as JPC1 with a small arrow pointing downwards.
I searched thru the manual, and no sign of what it's used for.
Anyone else noticed this when they installed their board jumpers and pins?
Many thanks
mystify

LOL..you can pm to syar as he has the modded bios for 1C as i'm using his bios as nice and easy. But like what qyx say corecentre messing all you setting including the bios and stay away any DOT, C&Q if you're ocing your system. Better used manual way to set it in the bios. GD luck.

K8N Neo2 plat, no post issue cont'd.

Hi its me again, the guy with the intermittent "no post" k8n neo2 plat.
Loaded the 1b3 beta the other day, again 1 day later the box would not post, as usual no
indication on the D-bracket, just one flash of the keyboard, the fans span one half round.
Since it could run for 1month plus with 1a3 beta BIOS(no usb2.0 (I could not wait any longer wanted usb2.0 so I flashed to a newer bios)),
start thinking it could be something between these latter full versions and this.
Then saw a thread on the web about someone having a Winnie that his box also has issues when swapping for latter
version than 1.5, with 1.5 his plat run fine. Go figure.
So for the time being I switched it to v1.5 bios, lets see how long it holds.
oh btw, the CMOS clear "no effect" seem to be avoided, by unplugging every external
peripheral prior to doing the cmos clear.

Quote from: Mysticcal on 30-June-05, 06:26:41
...Speaker Beeps once, USB LEDS Hold at Green, Red, Green, Green...
Tried everything, don't know what to do
And for those that ask me, what HDs? What IDEs?
Go take an A+ Course please. No one with 2 cells of brain capacity would hook everything up on first boot not knowing if it will work or not...
Thanks, all help appreciated.
The Led display from your D-Bracket indicates it is stopping when it tries to initialise the floppy drive. You don't have one. No A+ course needed, just hook up your floppy or disable it in the BIOS. I have no floppy drive (I have no need) so have it disabled. Probably best to hook up all relevant devices that will enable a working machine. The BIOS is probably halting when it can't initialise a device. There would be no point in it proceeding if it doesn't have all devices needed for a bootable machine...
See D-Bracket guide here D-Bracket Guide
I'm only guessing.

Can I use this hard drive with my K8N Neo2 Plat?

Can I use this http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=101220-12 hard drive with my K8N Neo2 Plat?

Quote from: Richard on 26-September-05, 00:25:21
JustinSane,
The short answer is:
Yes
Take Care,
Richard
LOL, thanks.

K8n neo2 Plat 54G, allround WLAN card

Similar Messages

Maybe you are looking for