K8N Neo2 Platinum + Athlon 64 X2 5000+ CPU

I found a local supplier that is selling the Athlon 64 X2 5000+ CPU socket 939.
My question is, will the 5000+ work on the K8N Neo2 Platinum board?
I ask because MSI's CPU support status only shows compatiblity up to 4800+, Chart here.
My current BIOS is W7025NMS V1.C

Quote from: Nexus6 on 26-July-06, 23:33:08
I double checked with my supplier here in Calgary, and he assures me it is a 5000+ socket 939.
They are suppose to getting them in the next week or two. :D
ok, trust me, the supplier is lying.
http://www.amd.com/us-en/Processors/ProductInformation/0,,30_118_609,00.html?redir=CPT301
i doubt that your supplier knows better than the manufacturer.

Similar Messages

Problem on boot MSI K8N Neo2 Platinum

I am an italian lover of MSI motherboards.
After I bought a MSI KT3 Ultra Aru, then MSI K7N2 Delta ILSR and now I have a K8N Neo2 Platinum.
My hardware are:
MSI K8N Neo2 Platinum
Athlon 64 3200 Winchester
Corsair XMS 1024 TWINX 3200 PLL
Maxtor Diamond Plus 9 80 Gb
Asus Radeon 9600XT.
The problem is that at the power on the bios don't start. The LED on D-Bracket are three green and one red. On the manual this error are written:
Inizializing Video Interface
This will start detecting CPU clock, checking type of video onboard. Then, detect and initialize the video adapter.
This problem is frequent for my motherboard. However not always.
I attend your answer for this problem.
Thank you for all and for my english school.

Hi Italiano,
Welcome to the forum.
Have you details of your power supply. please show Maximum 3.3v,5v & 12v.
These are usually on the side of the power unit.
try:-
1) Enter bios Cell Menu - HT change from 5 ---> 4 using +/- keys. Save & exit.
If it still doesn't boot try:-
2) Re-inserting your Asus Radeon 9600XT. Sometimes they don't go in correctly.
3) See if you can boot with just 1 memory module in slot 1.
Luck

Os/2 or beos on k8n neo2 platinum

i want to run beos on my system
or os/2
i have the k8n neo2 platinum
athlon 64 3500
1 gig geil ram
80 GB maxtor Pata hard drive
30 gb seagate Pata hard drive
60 gb SATA maxtor
ati card (wel figure that one out later)
BeOS 5 pro just reboots
and for some ungodly reason i cannot write my os/2 image files without some crap about "BAD TRACK 0" and i just bought a new pack of floppies. and it tells me this with EVERY disk
the only OTHER OS i can get to run is linux
which im quite fond of... "anything except WINDOZE"
I guess what my question is .....WHAT KIND OF VOODOO RITUAL DO I HAFTA PERFORM TO MAKE THIS WORK!!!!!!!
I dont have any chickens to bleed, but the neighbor does!!!!
Please help
ANY help would be GREATLY APPRICIATED!!!!!!!!!!!!!!!!!

Hi,
I tried to do the same with os/2 and MSI Neo4 Platinum/SLI and Athlon FX55.
OS/2 Warp 4 requires 256MB ram or less installed to do initial install. The first partition of HDD must be less than 2.06Gigs in order for the Kernel to compile.
EComStation has the newest version of OS/2. A Google search should take you right to Sundial's site.

K8N Neo2 Platinum supports which Athlon CPUs?

Pardon my ignorance, but I find this confusing:
Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU
Does the K8N Neo2 Platinum support Athlon 64 3500+ and 3800+, and NOT the 3700+? Does it support CPUs in the 4000 range? It would be easier to understand if msi just listed each CPU that this board supports.
This board is well-recommended, but I was actually considering the Athlon 3700+ for price/performance reasons. It's only $20 more than the 3500+, it's supposed to be easy to overclock, and it's way, way cheaper than the 3800+. But if the board doesn't support the 3700, I'll get the 3500.
Motherboard specs here:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=607
Thanks.

Quote from: Bob Jones on 29-April-06, 14:59:51
Pardon my ignorance, but I find this confusing:
Supports up to 3500+, 3800+ Athlon 64 FX 53, or higher CPU
that's because that info is released when the mobo is released. future upgrades are done through BIOS, and you will find additional information about added CPU support in the BIOS descriptions on the site.

K8N Neo2 Platinum - RAID Array Causes CPU Spikes!

I got my RAID array set up.
When I transfer files to it, my CPU usage (kernerl level) shoot up. It's around 100%, and it slows my system way down.
MSI K8N Neo2 Platinum.
RAID 0 using SATA ports 3 and 4.
I'm transferring files from my current windows installation to partitions on the raid array, so I can install windows on the array after removing the old drives.
I can transfer data fine, but using the array causes huge cpu usage which slows the rest of my system down a LOT.

Quote from: MurdoK on 19-April-06, 16:40:06
Hello !
Which SATA / Raid Driver did you install ? The ones from the nforce driver package provided by nvidia, or the original MSI driver ?
Go here:
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=607&kind=1
And download and install the SATA RAID Driver, make a backup of your Data first.
Greetz
Well, I have seen this post and it makes me wonder what are the differences between nforce chipset driver packages and the MSI ones if any? Thanks in advance.

New CPU, Msi K8n neo2 platinum - no boot!

Greetings!
I got the following components:
*MSI K8N NEO2 Platinum -54g MB
*4 x 512mb Geil Value Ram
*Gainward 7800GS+ Bliss 512mb AGP
*Samsung Spinpoint 500gb SATA HD
*Corsair 620HX (620W) PSU
*CPU AMD Opteron 180 Dual Core (upgrade from AMD 3000+ Winchester)
I recently upgraded my PC with a new HD, more ram, new CU Fan/heatsink - on an AMD 3000+ (Winchester). PC wouldn't boot - I did however manage to fix it. I think it was because of the ram, one of the bricks had some dust on it. Since then, my pc has worked 100%...
Today, however, I got a new PSU and CPU in the mail! A Corsair 620W PSU and an AMD OPTERON 180 Dual. I carefully cleaned the surface on the heatsink etc, and applied an appropriate amount of "Arctic Alumina" on the CPU/heatsink (as followed per instructions from Arctic). When I have connected everything, and fire my pc up - it just won't boot.. (The monitor won't light up).
Since then, I have carefully checked all wires, unplugged/replugged etc.
But it just won't boot!
I do have the latest bios (1.0D), so it should support my CPU.
I should mention some "weird" things, though. When I try to boot up, everything seems normal (All fans are running), but there are no lights on my case! And I can't turn off the PC while holding down the "power" button on my case. I can't reset either.. as soon as I turn the PC on (by turning on the PSU power switch), the PC starts running. Normally I would have to push the button on my case. ALSO: I have cleared CMOS, still a black screen. And I have tried 2 different monitors, so I know it aint that either.
My old PSU was a Chieftec 360W one (and my case is a Chieftec also). The old PSU was connected to "SFAN2" on my MB,.. my new PSU isn't connected to any "SFAN" at all.. I doubt that has anything to do with the problem though?
Any suggestions on what I might do ?
Edit: D-bracket shows this (Yellow, red, red, yellow):
BIOS Sign On
- This will start showing information about logo, processor brand name, etc... - It stops here. No boot screen

Quote from: BOSSKILLER on 14-November-07, 21:14:42
remove power cord from the PSU(else will not work) and Clear CMOS Guide.
leave one memory stick only in a 1st DIMM slot near to CPU socket and try to boot.
Done & done.
Still no boot screen :(

K8N NEO2 Platinum rebooting

Hi all,just got myself a 64bit MSI K8N NEO2 Platinum board & a 3200+,am happy with it but a couple of days ago i got a blue screen with a long message that i didnt have time to read before the pc rebooted,after the reboot i checked the event viewer log file in administrative tools/control panel but couldnt narrow it down as my particular error code wasnt among the possible causes.
Among some of the possible causes were incorrectly installed USB drivers or the BIOS,i downloaded the latest BIOS update before this problem started(V1.40) which i am using now,i used the MSI live update software to flash it which i did in windows mode.Sorry for prattling on!well it did it again tonight and i managed to read a bit of the writing on the blue screen which mentioned flashing the bios to the latest version.I was wondering if anyone else is having the same problem and if so could you please advise me? Thanks for your patience and any help Heres my sys specs:
Model: AMD Athlon(tm) 64 Processor 3200+
Speed: 2.01GHz
Model Number: 3200 (estimated)
Performance Rating: PR3015 (estimated)
Type: Standard
L2 On-board Cache: 512kB ECC Synchronous Write-Back (16-way, 64
byte line size)
Bus(es): ISA AGP PCI USB FireWire/1394
MP Support: 1 CPU(s)
MP APIC: No
System BIOS: Phoenix Technologies, LTD 6.00 PG
Mainboard: MS-7025
Total Memory: 1023MB DDR-SDRAM
Model: Micro-Star International Co Ltd (MSI) ???
(00E1)
Front Side Bus Speed: 1x 201MHz (201MHz data rate)
Model: Advanced Micro Devices (AMD) Athlon 64 /
Opteron HyperTransport Technology
Configuration
Front Side Bus Speed: 1x 201MHz (201MHz data rate)
Total Memory: 2048MB DDR-SDRAM
Memory Bus Speed: 2x 201MHz (402MHz data rate)
Monitor/Panel: CTX EX950F series
Adapter: RADEON X800 Series
Adapter: RADEON X800 Series Secondary
Removable Drive: Floppy disk drive
Hard Disk: Maxtor 6Y080L0
CD-ROM/DVD: HL-DT-ST DVDRAM GSA-4081B (CD 32X Rd, 24X Wr)
(DVD 4X Rd, 3X Wr)
CD-ROM/DVD: MSI CD-RW CR52 (CD 40X Rd, 52X Wr)
CD-ROM/DVD: AXV CD/DVD-ROM SCSI CdRom Device (CD 32X Rd)
(DVD 4X Rd)
1.44MB 3.5" (A:): N/A
Hard drive (C:): 76.3GB (51.9GB, 68% Free) (NTFS)
CD-ROM/DVD (D:): N/A
CD-ROM/DVD (E:): N/A
CD-ROM/DVD (F:): N/A
Serial/Parallel Port(s): 1 COM / 1 LPT
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard OpenHCD USB Host Controller
USB Controller/Hub: Standard Enhanced PCI to USB Host Controller
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
USB Controller/Hub: USB Root Hub
FireWire/1394 Controller/Hub: VIA OHCI Compliant IEEE 1394 Host Controller
Keyboard: Standard 101/102-Key or Microsoft Natural PS/
2 Keyboard
Mouse: PS/2 Compatible Mouse
Device: Creative SB Live! series
Device: Creative Game Port
Model: EPSON Stylus CX3200
Windows System: Microsoft Windows XP/2002 Home (Win32 x86)
5.01.2600 (Service Pack 2)
Network Drivers Enabled: Yes
Warning 100: Large memory sizes should be made of
Registered/Buffered memory.
Tip 101: Large memory sizes should be made of ECC/
Parity memory.
>
>
Device Type: VGA Video Adapter
Device ID: bus 1, device 0, function 0
Windows Device Name: RADEON X800 Series
OEM Device Name: ATI Technologies ??? (4A49)
OEM Hardware ID: FUN_0, VEN_1002, DEV_4A49, REV_00
Device Name: PC Partner Ltd ??? (4A49)
Product ID: VEN_174B, DEV_0D42
Revision: A / 1 (0)
Version: 3.00
Command Queue Length: 256
Fast-Writes Support: Yes
Over 4GB Addressing Support: No
Isochronous Mode Support: No
Addressing Support: 32-bit
Data Transfer Modes Support: 4x 8x

My K8N Neo Platinum [754] did not include a NB fan. But this usually means the overall size of the heatsink is larger. If you remove the fan from yours, the size of the heatsink will not be big enough to cool your NB. As for temps, I've never seen my NB get hotter than 45'C. Note that the core on my NB should be slightly different than yours.
You could try to use the BIOS fan control for the NB. If set correctly, it should reduce some noise.

K8N Neo2 Platinum Ordered - Advice for a noob please

Hi there,
this seems like a great forum, was hoping someone could give me some advice - Im trying to pre-empt any major probs....
I am a relative noob to building P.C's - done a few P4 based systems before but this will be my first Athlon based. This systems primary use will be gaming. I have the following on order (should be with me next week) : -
a) MSI K8N NEO2 Platinum Edition SCK 939 Motherboad
b) AMD ATHLON 64 3500+ 64bit SCK 939 Retail Inc Fan
c) 160GB Maxtor Calypso 8mb Cache 7200 SATA DHH
Components I have already
a) Graphics Card - Nvidia 6800 GT
b) Memory - Generic 2 X 512MB PC2700 DDR333 RAM
c) Sound Card - Creative SB Live Value
d) PSU - Jeantech 450W (22a on 12V Rail)
e) Case - pretty generic full tower case - no fans attached
f) CPU FAN - COOLERMASTER HYPER 48 SUPER SILENT HEATPIPE
g) Spare Hard drive - 120GB Maxtor IDE Hard drive
h) DVD Drives - 1 x Pioneeer 108 / 1 x Pioneer 104
I) Monitors - Ilyama 17" TFT & Toshiba 32WL36P LCD
I have some 'noobish' questions - apologies for my ignorance : -
1) Memory - Will my memory be okay ? Should I ditch it and buy some Corsair DDR400 (which everyone else seems to have!). Will performance suffer if I stick with the DDR 333 ? Do I need to adjust settings in BIOS regarding memory timing ? (I only picked up on this from reading through other posts on this board, and am totally clueless on 'timing'- Ive never needed to adjust timing on any previous PC's....!)
2) Sound Card - will I be better off sticking with the onboard sound on the MSI K8N neo 2 ? Or for best performance do I go with the SB LIve ? (god its a nightmare trying to get updated drivers for this card), Would I get a noticable performance increase buying an Audigy 2?
3) Vcore / other power issues - Reading this forum Im kinda scared by many posts along the lines of "..for stability I need to change my memory voltage to xx-V" or "...for a stable system I needed to change my Vcore to xx-V". Will I need to change the Bios default values on this system just to get it to run stably??
4) CPU FAN - Are AMD stock fans any good ? My Hyper 48 is quite highly rated....
5) Im completely new to SATA drives, but Ive printed off the very useful install guide on this site (which I intend to use). Is there anything I need to look out for concerning adding my IDE drive also.
I think thats about it just now - if anyone can see any other potential problems with my specs then please let me know. Im really not trying to be negative / pessimistic - after all the reason I have went for this motherboard is that it is rated as one of the best. Im just a bit paranoid that the dreaded B.S.O.D awaits me!
On a more positive note - does anyone have similar system specs they use for gaming ? How well does HL2 / Doom3 / Farcry etc fly J ? I cant wait !
Thanks for the time

you may find these helpful
Overclockers Uk Power Supplies
This Week Only Enermax Noisetaker 485W EG495AX-VE(G) SFMA ATX2.0 PSU (CA-007-EN) Might be tempting
Scan International Power Supply

USB Keyboard (K8N Neo2 platinum)

motherboard k8n neo2 platinum, somehow my motherboard does not recog my usb keyboard. i have gone to bios and enabled USB mouse/keyboard , my mouse is ok no matter which usb front or back but the keyboard usb does not work on any of usb . does anyone have any idea (hardly used keyboard, nearly new) all usb are ok??. your help will be much appreciated.
1-Motherboard MSI 7025 K8N Neo2 Platinum Chipset nForce3-250Gb/Ultra
2-CPU AMD Athlon Dual Core 3800X2
3- Graphic card (MSI FX5700) nVIDIA GeForce FX 5700
4-Memory 2 X1 GB DDR 400 DIMM kingston
5-HDD Maxtor 6Y160M0 (160 GB, 7200 RPM, SATA
6- OS Window XP Prof sp2
7-power supply Be Quite BQT- P5-420W

Bosskiller thanks for the reply it is a micorisoft multimedia, yes i have tried the back usb no luck there either. here is the link for the keyboard
http://www.farassoo.com/product/keyboard/fcr-8800.htm
but i wonder if you can tell me why some system their front usb doesn't work with usb keyboard a few have said this to me. many thanks

K8N Neo2 Platinum troubles.

This will be my first post here, and I hate it to be a problem post. Anyway, I built my own computer about 2 months ago, and I seem to have a problem with 2D applications. Here is my setup before I show you what I mean.
Mobo MSI K8N Neo2 Platinum
CPU Athlon 64 3000+ S939
PSU Antec 350W
GPU PNY Geforce 6800GT 256MB AGP
200GB Maxtor SATA HD
Sony DVD-RW
1 GB Mushkin PC3200 DDR Ram
OS Windows XP Pro
Ok, here is my exact problem. I seem to have trouble playing most MPEG, AVI, and WMV video types. I say most, because some will work ok. I have a picture of my problem here:http://img.photobucket.com/albums/v281/ZeroX585/hmm.jpg
There seem to be lines that appear across my video, and some 2D games such as Doom, Zsnes, and Worms world party. They also seem to appear when certain colors are shown during playback of videos and games, (mostly the darks and blacks.) 3D games work FINE, (Half Life 2, Doom 3, Far Cry are perfect). No errors what so ever. I have also noticed that this happens also when the program is dependent on some DirectX resources. I have uninstalled and reinstalled DX9 about 3 times, I have my latest Graphics drivers, I have my latest Windows Updates, I have the latest Mobo chipset drivers and such as well. I have also installed Windows XP again. I am not certain that this is a complete motherboard issue, as I do not have parts to switch out, but I am lost as to what I can do next. I HAVE replaced the GPU with an older ATI Radeon 9000, and it still happens. I highly doubt that the problem would lie within the CPU, but it's probable. I have reseated all the parts in the computer, and checked over my motherboard to make sure there isn't any damage to it. I am lost as to what I can do next though.
There is one thing I have noticed though, is if I go into my Display Properties and take the Hardware Acceleration tab down to "Disable all Direct 3D and Direct Draw Accelerations", the 2D programs work FINE. But if it goes even one notch up, it goes back to the lines. Anyone know what this could be related to?? Thank you for your help.

Before I had my 6800 GT, I was using the Radeon 9000, and I did use Driver Cleaner 3 to remove the Radeon driver. I also used Driver Cleaner when I update the Nvidia drivers, and I've done this a few times as well. I've tried using the Nvidia direct drivers (Current version), and I am currently using the PNY version of the Nvidia drivers, all the while using Driver cleaner to remove the old drivers before installing the new ones. I have not tried any games or videos in safe mode though, I think I will do that. I will get a screen shot of Doom if I can. By the way, I am not certain what you mean by "Be sure to run the Nvidia option, not the Nforce option."

K8N-Neo2 Platinum pauses for 25 sec at boot, nvatabus.sys the problem?

All,
After POSTing normally and starting to load Windows XP, my system halts at the Windows XP splash screen for about 25 seconds. Nothing happens, no disk activity or anything, the system just sits there.
I used Microsoft's Bootvis utility to see what was happening. It turns out that the nvatabus.sys driver consumes 100% CPU at boot for 25 seconds then the system continues to boot normally. Does anyone else see anything like this?
I am running the latest nForce drivers from MSI. The driver in question:
NVIDIA nForce3 Serial ATA Controller 2.6
Driver Date 6/3/2004
c:\WINDOWS\System32\DRIVERS\nvatabus.sys 5.10.2600.0446
Windows XP SP1
I have a RAID1 of two 160 GB SATA drives. The mirror is healthy and working fine.
After booting the system is rock-solid stable, no problems there. It's just this unexplained pause at boot. Does anyone have any ideas how to fix this?

ok check it out guy's this thing drove me insane all night last night and most of today. I was ready to return everything and give up. But alas all is not lost. Here is the rundown on what i just did.
My Equipment:
Athlon 64 3800+(w/ stock fan)
MSI K8N Neo2 Platinum Socket 939
2X512 Corsair TWINX1024-3200XLPRO ( with the cool led's )
2 SATA HD (1 Maxtor Diamond10 300 GB w/ 16mb cache, 1 Segate 160GB w/8mb cache)
PP&C 425 ATX Deluxe
Radeon 9700 Pro ( cat 4.8 )
Audigy2 ZS
Sony Floppy
Sony 8x52x52x32 DVD Rewrite
I have been reading and reading just like all you guy's. On a few websites i would pick up bits and pieces on what to try. Heres what i did. Upon Boot up i entered the bios. I then went to Cell Soft and adjusted my timings for my memory. I was at 2.5 not 2.75. I then set my speed down to 166. Exited and restarted. Big mistake everything ri=uns terrible slow and my expensive DDR 400 memory was showing up correctly at 333. Rebooted again entered the bios. reset my speed to 400. Then set the Overclock feature to manual. Set my timings at 2,2,5,2 200 and 2.75 volts. After saving settings and exiting I then turned off the computer. As per some other suggestions I moved my Audigy2 to the bottom most pci slot the one above the orange slot. I moved my memory to slots 2 and 4. I moved my SATA to slots 3 and 4. I rebooted went into the bios again and setup all my voltages. CPU was Auto, AGP was max yellow setting. Memory still at 2.75. I disabled the onboard serial and parrallel ports. Rebooted
Fearing the worst,
5 seconds, 10 seconds, windows screen loging prompt. There was nothing wrong at all. It rebooted effortlessly. It re found my Audigy card and wanted driver but that was it. I am going to reboot a few more times and then run sisandra to test. I hope some of this will help you. I post in a few after some of those reboots.

K8N Neo2 Platinum ed. XP Boot freese problem !!!

After the bios post screen, when the xp logo disappered, it's freese 2-3 minutes. XP starts normally and full functionally after the freese. I have no stability problem.
I have install XPSP2 ( SP2 embedded XP cd. Created autostremer) Install all latest drivers and bios update (1.B0)
I've use only one hdd, no raid array. I've try the bios settings optimized. Guided like this documents FAQ
Specially thanks for your interest
K8N Neo2 Platinum ed nforce3 ultra
AMD64 Athlon venice 3000+
sata1 Samsung HD080HJ SATA 80Gb
ide1 LG-DVD writter
MSI Geforce FX5200 AGP
2*256 Kingston DDR
No FDD
A4Tech keyboard and mouse PS2
CPU-Z Report CPUZ

Check eventviewer for drivers/sw thats fails to load .
Other than that most boot delay problems are related to bad IDE (master/slave) configuration or cables .

Desperate: K8N Neo2 Platinum won't work!!

Bought myself a new motherboard, processor and memory and it just won't work!
Searched this forum for a solution, but haven't found one yet.
Try to install Windows XP, but it just won't start.
I now get an error code 0x80040507.
Before that, it just rebooted again and again.
My configuration:
MSI K8N Neo2 Platinum
AMD Athlon 64 3500+ Winchester core
2x512 Corsair Twinx1024-3200
Prim. master: HDD 40 Gb Seagate U100/72 ATA
Prim. slave : DVD-RW NEC ND-3500
Sec. master : HDD 160 Gb Maxtor Diamond Max Plus 9 ATA
Sec. slave : DVD-R from LG
PSU: Antec 350W, model SL350P (+5V=35A, +12V=16A, +3,3V=28A, -5V=0,5A, -12V=0,8A, +5V=2.0A)
Sapphire 9800 Atlantis Pro 128Mb
PCI-1 : empty
PCI-2 : Hauppauge WinTV PVR250
PCI-3 : Linksys wireless network card (model WMP11)
PCI-4 : Creative Soundcard SB Live 1024
Do I need a new PSU?? or is there another problem?

AMD recommends a PSU with atleast 24a on the 12v rail. This does not mean your PSU won't hack it, it just means that as a rule of thumb, it's not supposed to.
Could your PSU be the cause of your problem? Possibly! You have a lot of components drawing power from your PSU. It would be wise to buy a beefier PSU with 12v/5v/3.3v amps all in the 32+ range (see my PSU in my signature or the enermax 460/465w whisper II)).
The problem with not having a better PSU to work with is you could encounter an error, deem it as a result of something it's not, and think the PSU is good and something is bad when it's really the other way around. Moral to the story: get a new PSU.
I tried searching microsoft's knowledge base for your error and nothing turned up that had anything to do with windows installation errors. Are you sure you copied the error down correctly?
If so, the only recommendation I have for you is this. Try installing windows with minimal components installed (CPU, motherboard, videocard, single cdrom, single hard drive). Leave your SB Live! out. Leave your WinTV out. Leave your linksys card out. Leave your DVD-R from LG out. And if you are willing to conserve even more power. If you really want to conserve power, you can install windows with only one stick of ram installed.
Next thing you want to do is check to make sure the memory is not faulty. Start by putting only one stick of memory in slot one and testing it using memtest86+ (i hope that link is correct). You're going to want to run a 1-4 hour standard loop of tests followed by a 12-24 hour loop of test 5. Then you will do the same thing with stick two in slot one. After this works, test to make sure there's nothing wrong with the motherboard by doing the exact same tests again one by one with the sticks in slot two this time around. After this is all done, do the tests again with both sticks in slots one and two. if it doesn't work like this, you could have faulty memory (but this should work). You can always run your memory in the same colored slots (single channel (slots one and three)) but this will cause you to take a hit in performance. Generally, for all instensive purposes, you should be able to run it in dual channel mode without any problems. I imagine you will be able to if the sticks are good.
If they don't work in dual channel mode, to be completely honest, I don't know what you would consider the problem then... could be the PSU... could be a badly matched pair... could be the motherboard. All this is determined by how you handled the parts when installing them. There are a lot of unknowns when trying to help a user without knowing anything about their install.
If all memtests' run successfully, you are now ready to install windows. If windows doesn't install correctly, you probably have a botched BIOS setting somewhere (like aggressive memory timings) or something similiar that's stopping you from successfully installing windows.
Buy a new PSU

New to OC - a64 3200+ 939, MSI K8N Neo2 Platinum

Dear All,
First off. I am new here so hi to you all
I am new to overclocking. Please tell me how far I can go for my CPU (RAM I don't plan to), and what settings in bios I need to change (in simple words, don't try me on abbrev too much :P)
Spec:
AMD Athlon 64 3200+ 939 Winchester
MSI K8N Neo2 Platinum
2x512 Samsung PC3200 DDR Dual Channel RAM (I don't plan to OC RAM)
Antec TruePower 380W (Sonata edition)
BFG GeForce 6800 OC (I don't really plan to OC that either, dunno how)
Would I be able to up from 2.0ghz to 2.2ghz?
Current CPU idle temp: 38 degrees (Arctic Silver 5 applied)
Thank you!
dL

Quote
Originally posted by dL.
Temp at load (playing CS:S) is about 41-42 degrees.
Idle is about 35-38. Temps look ok
Will my Antec TruePower 380W power supply provide sufficient power when increasing vcore? Sjould do just fine Will increasing vcore damage anything? Not as long as it stays cool. How much should I increase it by? Just up a .05 at a time and test.
Also, can I lower my HT to even lower like 3x to get more clock speed? Yes but X4 should be good up to 250. Youn need to keep it under 1000. 250 x4 = 1000
dL

Which power supply for k8n neo2 Platinum

I need to buy a new power supply for my computer. With the ATX12V v2.2 standard and ATX12V 2.01 and the "no -5v on new psu's" issue I'm at a loss as to what to look for. I have looked and cannot find what "standard" (is that even the correct term?) the k8n neo2 supports.
My main requirement is that the psu be 550-650 watts and have modular cables. I know someday I will have to upgrade my system to PCI-E and modern components, so I would like a PSU that would work now and in the future.
Could someone point me in the right direction?
Many thanks
system spec's
Motherboard- MSI K8N Neo2 Platinum
CPU- AMD Athlon 64 X2 Dual core 4800 939 socket
Memory-CORSAIR 2X1G Twinx2048
Video- ATI HIS 4670 1GB AGP
HD- Seagate 100 gb 7200 rpm
Drives CD-DVD and CD-RW
PSU- Ultra X Connect 500W ATX
Sound- Creative SB Audigy2 Gamer
OS- WinXP Home SP3 32 bit

Why do you need 550-650W or is that just because of future needs? I would suggest one of the Corsair +12V single rail modular PSU's if you insist on the modular design. Check newegg for what they have for modular in the Corsair lineup. I'm sure you're aware that their price is considerably higher than the non-modular. K8 MB's that needed -5V are the early ones that had Creative Sound Blaster onboard audio.
HX650
   * Was: $139.99
   * $109.99
   * After $10.00 Rebate
   * $10.18 Shipping
That's what it is now but if you don't need it in a big hurry you can probably wait a while and get for the same price but with free shipping.
Edit: Gee, Ultra with blown caps, I just happen to have a xPRO 800W that blew some caps, repaired it and started going bad again and then got my TX650 to replace it. Got it for $70 after rebate (which I haven't received yet) by waiting for the right price, rebate and free shipping. VX550 would have been good enough but at the time I got the TX650 at a lower price.

K8N Neo2 Platinum + Athlon 64 X2 5000+ CPU

Similar Messages

Maybe you are looking for