K8N neo2 Platinum - what's up with the COM port?

It doesn't recognize my Wacom Graphire tablet - or the tablet driver doesn't recognize the port..
The comport shows up fine in XP - I've tried all the different settings in bios including setting it to com2 instead of com1 but no luck..:(
The tablet hooks up to the ps2 plug and is supposed to get it's power from the serial port..
Any help is most welcome

well.. - now it works - but only because I bought a cheap serial PCI card
Strange- I wonder if the serial port on the mobo could be broken and still show up allright both in bios and XP ??

Similar Messages

MSI K8N Neo2 Platinum (WAKE On Lan with Realtek)?

Hello can the MSI K8N Neo2 Platinum (BIOS 1.B) WAKE On Lan with the Realtek card?
It does not appear to work for me and there is nothing in the BIOS.
My WOL packets wake up other PC's.
Please Help.

Hello !
Go into Bios Setup, Integrated Periphals, and disable the nvidia Lan, but let the Onboard LAN enabled.
Now go to PCI Configuration, Wakeup Events, and enable wakeup on PCI event and wake on LAN.
Check in Boot Order Menu if you can select the realtek onboard Lan as first booting device, push it in first place.
Another Option could be using the nvidia Lan, its reported to work with wakeon lan.
Greetz

HELP ! A FATAL BUG ! ! ! What`s wrong with the SATA port ? ? ?

My MacBook (MD103) got a serious bug here, PLEASE HELP ME !
I changed my main drive to a Crucial 256GB SSD and memory to Micron 16GB, and I also removed the optical drive. The optical drive has been replaced by the original Toshiba HDD. Then, the question has came out! The OS hourly report Errors and restart. Finally, the HDD icon will disappear from Finder and the drive will be changed into a read-only disk (Under the Windows OS installed by BOOTCAMP). Then, I have to format the drive.
BUT the question still happen AGAIN AND AGAIN！ Though, I changed the Toshiba Drive by a WesternDigital one (Model. LPVT 500G), which is the most energy-efficient notebook HDD, BUT the question take place AGAIN when I listening an iTunes music ! ! ! (The music tone was reapted again and adain, and the OSX was shut down in a sudden, without any operation)
I searched some information and did some attempt. The OS can work well when I change the second drive by a old 250GB HDD, but I really can`t use such a slow and small drive for work, and I have to pray for my data every time when I press the power button. So, please help me! Improve the SATA port power management or someting else, THE BUG CAN BE SOLVED BY YOU, THE GREATEST ENGINEERS.
Please let me know the progress, THANK YOU ! ! !

Firstly, Thanks!
I've checked it and if the question didn`t occur, the disk can work well. The I/O speed can reach 113MB/s. And someone said it causes by SATA port power supply.

RESOLVED - K8N Neo2 Platinum problem with large Seagate disk

Hi All,
I've been running this system for 4 years and I'm very happy with it. But I've run into a problem:
I'm trying to exchange my 120 GB Seagate Barracuda systemdisk with a 500 GB Barracuda and I can't install XP with SP2.
First I tried to clone the old HD with Norton Ghost and Acronis True Image. The cloning looked fine but after taking the old HD out and moving the new one to P-ATA 1 as Primary Master I get an "error - no operating system found". I also tried a fresh install from CD. After the CD reboots the system I get the same error.
The HD is present in BIOS with the right parameters and all is looking well - but still no go.
I've fiddled around in BIOS (vers. 1.3) with the different settings (LBA, Large, Auto, Csh.) The last 2 options gives the "no operating system" error and the first 2 gives a "disk error" although Seagate says that I should change settings to "LBA".
I only have the new HD in the machine. I also tried fixboot and fixmbr. I can see all the installed files when I put it in as a slave.
So my question is:
Does the K8N Neo2 Platinum have a problem with large hd's as system disk?
Or is this a Seagate or Windows problem ?
Any help is much appreciated!
Mads

Actually that was the first thing I did just to see if the drive worked :-) - except that I had it as master on the second ide cable. It formats like it should and all partitions report "healthy". The only difference is that the new drives c-partition is set as active (can't find a way to change it back) - while the old one is set as system. Could this make a difference ?
Since neither cloning nor a fresh install works I think the problem is something else. Maybe I should try Seatools and see if that makes any difference.
Thank's all for help so far! - Other suggestions ?

Is it possible to order bios chip 1b for K8N Neo2 Platinum

Hi there im wondering if its possible to order from msi or elsewere bios 1b for K8N Neo2 Platinum seeing as i have the bios tools here, if so whats the install procedure and setup please or any other releviant information?, i have 1.5 everything works fine but theres no way i want to flash
Thanks Blackrat7768

Quote from: BlackRat7768 on 09-February-06, 21:34:23
My issues are:
Improve compatilbility problem with some USB 2.0 devices
BIOS reported incorrect CPU temperature.
If you have the d-bracket installed, it may help to completely disconnect it. Sometimes it will cause inaccurate temp readings. You can always plug it back in if you need it for troubleshooting.
I unhooked mine & my reported CPU temps dropped by 8C...

Help K8N Neo2 Platinum

hi Having Real Problems The With K8N Neo2 Platinum Board
When Starting Up The PC All I Get Is One LOud Beep That Lasts About
2 Seconds And Then Stops For 2 Seconds Then Does It Again And So On
But Never Gets To Post ,I Thought It Might Be Some Card Not Seated Right
But After Checking All Cards And Memory The Same Thing Happens Ive Now Took
All The Components Out And Rebuilt My Old 2600xp Socket a And All The Components Are Working Fine , So My Problem is HAve I Got A Doa Motherboard
Or Is It The Athlon64 3200+ ,Oh And The memory That I Been Using Is Branded
Samsung Pc3200 512mb And Ive Also Tried Samsung Branded Pc2700 2x256mb
But Since This Memory Works Fine In My old 2600xp System It Cant Be That Could it >?

One Of The problems That I Have Is I Didnt Get the D Card With The Motherboard
As i Bought A OEM Product ,Ive Only Just read About The Memory Config On MSI Site Which Clearly States That You Should Always Start To Populate The Green
First But I`m Sure This Has Only Just Been Added To The Site Check It Here
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=607
And yes The memory Can Work In Dual Channel Mode But Only With The Samsung PC2700 At 256mb A peice
My Thinking Behind The Graphics CArd Change ie (Swapping The Radeon 9800 Pro
For A Old Radeon 9600 Pro ) Is To See If It May be The Power Supply As The The 9800 Pro Shares The Same 12v line As The Athlon64 CPu But Can`t See It Being The Power Supply As its Only 3 Weeks Old And Is A enermax 470w With Dual 12v
RAils
But Still My Biggest Question Is Could This be A Faulty athlon64 3200xp Skt 939 CPU >?

Buffalo pc3200 dd433-r1g and K8N Neo2 Platinum

I bought a Buffalo 1Gb PC3200 (dd4333L-R1G/MD) for my K8N Neo2 Platinum. I put on the "green" slot (unique RAM Module) and...........Nothing, my "cacharro" dont boot. Is the RAM type (brand, etc) or is "this" particular modula that isbad or something? HELP! please (excuse my english, regards from Chile)

Try other RAM sockets. Worst case reset the Bios.

Satellite A300-1BZ with Vista - Com Port has disappeared

Hi everyone.
My first time and I'm a bit of a duffer with technical stuff, so please be gentle with me!
A300-1BZ with Vista.
A while ago I installed 'CarSoft V.83' (Engine diagnosis) from CD onto my laptop. It asked me to verify the com-port.
I looked in the device manager and in the list I saw 'com-port 4'. Ok, we'll go with that then. Everything worked fine and I was happily talking away to my car.
Yesterday I went to use it for the second time and it said there was an error with the com-port and to 'verify' the com-port.
So, I got the device manager back up and there is no mention of any com-ports in the list! It was there the last time I looked and now it's vanished!
I was at a loss what to do so, I uninstalled the CarSoft and then re-intsalled it again. Got the same error message.
Went to device manager. Still no com-port 4 in the list, or anything that relates to a com-port.
I don't know how or if I can get it back.
Please help!

Hi mate
First of all there are no com ports. The com port which you could see in device manager was an virtual port created by car software.
What to say
I recommend removing the car software from the system firstly.
Then download the CCleaner and clean the system and registry entries.
Reboot the notebook and run the CCleaner again
After that install the car software again
Maybe it helps

K8N-Neo2 Platinum pauses for 25 sec at boot, nvatabus.sys the problem?

All,
After POSTing normally and starting to load Windows XP, my system halts at the Windows XP splash screen for about 25 seconds. Nothing happens, no disk activity or anything, the system just sits there.
I used Microsoft's Bootvis utility to see what was happening. It turns out that the nvatabus.sys driver consumes 100% CPU at boot for 25 seconds then the system continues to boot normally. Does anyone else see anything like this?
I am running the latest nForce drivers from MSI. The driver in question:
NVIDIA nForce3 Serial ATA Controller 2.6
Driver Date 6/3/2004
c:\WINDOWS\System32\DRIVERS\nvatabus.sys 5.10.2600.0446
Windows XP SP1
I have a RAID1 of two 160 GB SATA drives. The mirror is healthy and working fine.
After booting the system is rock-solid stable, no problems there. It's just this unexplained pause at boot. Does anyone have any ideas how to fix this?

ok check it out guy's this thing drove me insane all night last night and most of today. I was ready to return everything and give up. But alas all is not lost. Here is the rundown on what i just did.
My Equipment:
Athlon 64 3800+(w/ stock fan)
MSI K8N Neo2 Platinum Socket 939
2X512 Corsair TWINX1024-3200XLPRO ( with the cool led's )
2 SATA HD (1 Maxtor Diamond10 300 GB w/ 16mb cache, 1 Segate 160GB w/8mb cache)
PP&C 425 ATX Deluxe
Radeon 9700 Pro ( cat 4.8 )
Audigy2 ZS
Sony Floppy
Sony 8x52x52x32 DVD Rewrite
I have been reading and reading just like all you guy's. On a few websites i would pick up bits and pieces on what to try. Heres what i did. Upon Boot up i entered the bios. I then went to Cell Soft and adjusted my timings for my memory. I was at 2.5 not 2.75. I then set my speed down to 166. Exited and restarted. Big mistake everything ri=uns terrible slow and my expensive DDR 400 memory was showing up correctly at 333. Rebooted again entered the bios. reset my speed to 400. Then set the Overclock feature to manual. Set my timings at 2,2,5,2 200 and 2.75 volts. After saving settings and exiting I then turned off the computer. As per some other suggestions I moved my Audigy2 to the bottom most pci slot the one above the orange slot. I moved my memory to slots 2 and 4. I moved my SATA to slots 3 and 4. I rebooted went into the bios again and setup all my voltages. CPU was Auto, AGP was max yellow setting. Memory still at 2.75. I disabled the onboard serial and parrallel ports. Rebooted
Fearing the worst,
5 seconds, 10 seconds, windows screen loging prompt. There was nothing wrong at all. It rebooted effortlessly. It re found my Audigy card and wanted driver but that was it. I am going to reboot a few more times and then run sisandra to test. I hope some of this will help you. I post in a few after some of those reboots.

PS2 mouse with MSI K8N Neo2 Platinum

Me and my uncle both have MSI K8N Neo2 Platinum motherboards and both boards were bought from different places at different times. Both boards are exactly the same and both have the latest 1.4 BIOS.
We're both having the same problem with ps2 mice, I myself am not bothered about this problem but my uncle is so I need help.
Basically when you insert a ps2 mouse into the back of both our pcs, 7 times out of 10 the pc loads windows but the mouse doesnt move. The mouse is completely frozen. When you plug a usb mouse in, i can use that but still the ps2 mouse doesnt move.
When you plug in a ps2 keyboard along with the ps2 mouse, the mouse works everything time but without the ps2 keyboard in, most times the ps2 mouse doesnt work.
We both have no problems with usb devices but the ps2 mouse port (Green) isnt working all the time.
Having a quick look at this forum, i saw this thread.. PS/2 mouse not working exact same problem as me and my uncle.... is there a fix out now for this?
I use a usb mouse anyway and i know if my uncle switches to usb it will work but he shouldnt have to do this, if a board has ps2 support, it should work.

Quote
Two choices. USB Mouse or RMA it
What does RMA it mean?
Quote
The PS/2 ports on any computer can get blown if you plug a PS/2 device when the computer is powered.
I didnt know that, thanks for telling me, i know not to do this in the future.
Quote
Other than that, check BIOS to see if PS/2 option is enabled!
If ps/2 wasnt enabled in the BIOS, the ps2 devices wouldnt work at all would they? My ps2 keyboard works fine, my uncles ps2 mouse doesnt work sometimes so ps2 must be enabled in the bios.
thanks for the replies, could this be fixed if MSI knew this problem and release a new bios?

MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

This topic has been moved to AMD64 nVidia Based board.
[Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

First post, whoo hooo
So what version of BIOS are u running? I recently installed the two newest versions 2.0 and 2.1, and they both give me problems. With the latest (2.1) I'm getting the same error as you. Returning back to previous BIOS fixed my problems. Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
Let me know if you fix it, thats why im here, .

K8N NEO2 PLATINUM HANGS WITH NVIDIA, WORKS WITH ATI???????????

HI
I have endless problems with nivida cards on a MSI K8N NEO2 PLATINUM board. I have tried 4 different nvidia cards and they all hang on any 3D app or game. NFSU2 looks like it lags in the menu already. It stops for 2 sec then goes again for about 10 secs.
Slot in any ATI grachics card and it works 100% for hours with no problems. I am runnig a 480W Antec psu aslo, so there is no power problem.
Anybody have any idea???????????????????

well..i tried to oc my vid with 78.01 my comp rebooted in just a few seconds of game play...so i reset clock speeds to stock...got rid of 78.01's and installed 80.40 betas...so far so good..and i got this email replay from BFG asking for any fixes..here's a summary of what they said
"If you check the HardOCP forums as well as many others, issues with NF3 chipset motherboards are rampant. They seem to be limited to the implementation of a 64-bit processor with AGP architecture cards, fast ones in particular, but NOT limited to NVIDIA cards. People with fast ATI cards have the same issues... so don't act without investigating.
We have no point of action we can do for you in the matter. The chipset and drivers for it are made by NVIDIA, then implemented by different companies on their products. The exact same can be said for the GPU, chipset on the graphics cards and drivers for them. We're a manufacturer who uses their technology and unified drivers for our cards, but we make "OC" cards that run faster than NVIDIA designed their GPU and chips to run. NVIDIA can't control "how" the companies implement their technology, but makes every effort to create drivers to accommodate issues that crop up during the product 'life-cycle'."
ill say this...i personally havent seen anyone with an ATI having this issue..if anyone knows of that...please let me know...as much as i bashed ATI....i feel like im left with no choice but to buy one(x850xt pe)if no one plans on fixing this for us..any imput is appreciated

Need help with k8n neo2 platinum

I've just installed a new k8n neo2 platinum s939 board with a venice core 3200+ cpu the htt is 2000 and multiplier 10x.
I've gone to the core cell menu and set the htt to 4x (seemed to be this at default) and the max mem clock at 166 (more about this in a moment), the fsb will go quite easily up to 250mhz even 255mhz, but when I try 260 Mhz the machine when it reboots shows the initial slash screen but then goes to a blank screen with the cursor flashing in the top left hand corner, I can't even get back into the bios setup without clearing the cmos.
The odd thing is that the adjust cpu vid is showing a voltage of 1.50 and not 1.40 or startup.
Anyway with the fsb at 250mhz the bios screen is showing the Current ddr clock at 208 mhz ( not the max memclock setting of 166) the memory in the motherboard ( a crucial 512meg ddr333 single stick) seems to perform OK according to memtest which shows no errors after 2 cycles.
Any attempt to get to 260mhz fsb appears to fail even by upping the cpu vid to 1.525v unless i adjust the cpu voltage setting which by default is set to (by cpu vid) to +3.3%. Doing this enables me to get to fsb 260mhz but the memtest fails ( even when I set the max memclock to 133, which shows my current ddr speed at 174mhz, well below the 208mhz which appeared stable with the fsb at 250mhz?)
So firstly why are there two cpu voltage settings in the bios when my manual only shows 1 (there is no mention of this cpu vid setting?
How is it that my memory is stable at 208mhz with a fsb of 255mhz but unstable at 174mhz with the fsb set at 260mhz?
Why does the memory clock lock not appear to be working, the memory should be fixed at 166mhz but infact increases with fsb?
I have bios revision 1.5.
Please help as I am not familiar with the bios settings for this nforce 3 chipset, they seem rather odd to me. I'm sure my venice core 3200+ cpu can get beyond 250mhz fsb, I have another pc with a venice core 3000+ cpu which runs quite happily at 270mhz fsb.
PS I've tried reducing the htt to 3x but the same thing happens.

OK further feed back, I can get to over 260mhz fsb but the system is not stable the memory runs OK with mem test but I have problems with prime95.
I had to up the cpu core voltage to 1.53v to get to 260mhz using the cpu voltage setting in the bios and setting a 5% increase. increasing the cpu vid setting to 1.55v did not seem to do anything at all the core voltage was still at 1.43v.
I upped the mem voltage to 2.6v from 2.5 but still could not get the system to be stable, it may be that the memory is holding the system back but I don't want to pay for better memory at the moment. Unless anyone has got any other ideas it looks like I may be forced to settle with 250mhz, well still a 500mhz increase maybe not that bad. I've now to try 3d benchmarking using my radeon 9600xt and 3dmark 03.

The build in firewall in MSI K8N Neo2 Platinum

Hello everyone,
I am using an MSI K8N Neo2 Platinum-54G nForce3. I wonder if anyone else is using the built in firewall? I have some problems with my Internet connection and I think it is firewall related.
I would like to know if anyone else has any valuable feedback on this subject.
Thank you!

Works fine for me, make sure you have the latest drivers installed and turn off any other firewall including the Windows one. You will find that you may have to set up some rules to open up ports for some apps. I have set mine up to play Farcry and now get no Punkbuster problems.
I am using the Nvidia ethernet to connect toe the internet and the Realtek to network my second PC.

Reboot problem with MSI K8N Neo2 Platinum and 250 GB SATA HDD

I'm having a "reboot" problem with my MSI K8N Neo2 Platinum. After turning my system on it will run without any problems, until I reboot. After a reboot it will always hang after the initial windows-bootscreen. The HDD-light will remain on. If, instead of going into Windows XP SP2, I try to enter the BIOS after a reboot (DEL) the system will also hang (blank screen with blinking cursor).
It started doing this after I installed the Maxtor 250 GB SATA disk. Before, I didn't have problems rebooting. If I disconnect the Maxtor drive I can reboot and enter BIOS and Windows each and every time. Reconnecting the Maxtor 250 GB SATA drive will return the reboot problem. I always have to use the power swith to get a working system again. It's not enough to do a hard reset (this has the same effect as rebooting).
Here are the details of my system:
MSI K8N Neo2 Platinum (BIOS 1.B)
Athlon 64 3200+ (Winchester, 2 Ghz, 512 KB cache, stepping DH-D0)
2 x Kingston KVR400X64C25/512, 512 MB, DDR, PC3200 (2,5-3-3-8 T1)
Asus Radeon AX800 Pro (256 MB)
PSU Antec Sonata 380W
HDD Maxtor 80Gb ATA (6Y080P0, Pri Master)
HDD Seagate 250Gb SATA (ST3200822AS)
HDD Maxtor 250Gb SATA (6V250F0 - jumpered in SATA150 mode, the mobo wouldn't work with the drive in SATA300-mode)
Aopen COM5232/AAH Pro CD-Writer ATA (Sec Master)
BenQ DW1640 DVD-Writer ATA (Sec Slave)
P.S. The NVidia IDE-drivers are NOT installed. System is not overclocked.

Thank you for all the replies. Upgrading to the latest Nvidia IDE-drivers did not fix my problem. Moving to other SATA-ports did not help either. Upgrading the mobo's BIOS is not really an option (I'm using one version before the most recent and there isn't anything in the fixlist of the latest BIOS).
Now I've contacted Maxtor for (hopefully) a new firmware.
Quote from: rogueUK on 31-July-06, 16:55:42
insego please use the SEARCH BUTTON
I did use the search function to find other people with similar problems. The reason I started a topic of my own was because of the text you get while joining:
Quote
Do not hijack another persons topic. If you have a similar problem, start your own thread anyway.
Maybe in retrospect I should first have tried the solutions in other topics.

K8N neo2 Platinum - what's up with the COM port?

Similar Messages

Maybe you are looking for