K8n neo2 POST problem during cold startup

Hello everybody,
Sorry for posting this again but i just don't understand it.
The facts:
Every once in a while - sometimes daily and sometimes every 2nd or 3rd day - when I power on my computer the bios hangs at its very first stage with all d-leds red.
This is according to the d-bracket : 'system power on, bios will hang here if processor is damaged on not installed properly'.
But after ~ 30 seconds the boot process continues (it apparently doesn't start again but continues) displaying the following error message after IDE detection: 'warning. system now in safe mode. please reset all overclocking features.'
After that everything is FINE, the bios settings are as always (failsafe with sata enabled) and the computer has no other problems. It runs all applications without trouble, memtest86 and prime95 don't give me errors and I won't get bsod's.
This entire issue happens only when the computer was turned off for a prolonged period, i.e. it has to be off for more than 6-8 hours.
I just don't understand it  .
I see that here are a couple of guys with quite a huge knowlege of this machines and so i hope that someone has a clue to what this issue can be caused by and perhaps how it could be solved ?
Thanx,
vanish
(Forgive me my misspellings, i'm not a native so)

This is the email I sent to MSI UK:
Hi
I believe I have a faulty motherboard as the BIOS only posts after I switch the power on at least 3 - 6 times from a cold boot.
The error message I keep getting is 'warning system now in safe mode, please reset overclocking features in bios or press F1 to continue' although I have not altered any overclocking features or overclocked anything.  One thing I have noticed is that the processor is running at 2210 Mhz (used MSI Core Centre) instead of 2200 MHz as standard even though it is displays 200 MHz in the BIOS, could this be possibly something to do with it?
Please could you suggest what process I need to do to RMA the board or how I could diagnose the problem.
I have tried 3 different types of RAM in various slots, 1 and 2 sticks, dual and single channel and the same thing keeps happening.
My PC Spec:
Athlon 64 3500 90nm
Thermalright XP-90 Heatsync with a Vantec Stealth 90mm fan.
MSI K8N Neo 2 Platinum
TRIED RAM: 2 x 512 MB. Infineon 3-3-3-8 Cas 2 PC3200
      2 x 512 MB. Corsair LL-PRO PC3200 2-3-2-6 Cas 2 (currently using)
      2 x 512 MB. Adata 3-3-3-8 Cas 2.5 PC3200
2x120 GB Maxtor Diamondmax 9 SATA hard disks (not in any RAID config)
Galaxy Geforce 6800 GT
Soundblaster Audigy 2
Tagan 480W PSU.

Similar Messages

  • MOVED: [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    This topic has been moved to AMD64 nVidia Based board.
    [Athlon64] Msi K8N Neo2 Platinum problems with Patriot Ram

    First post, whoo hooo   
    So what version of BIOS are u running?  I recently installed the two newest versions 2.0 and 2.1, and they both give me problems.  With the latest (2.1) I'm getting the same error as you.  Returning back to previous BIOS fixed my problems.  Oh yeah, my RAM is Kingston Hyper-X, so i don't think thats your problem.
    Let me know if you fix it, thats why im here, .

  • K8N Neo2 Platinum - satisfied except cold boot

    My new build is doing well except for the near-famous cold-boot problem. When the box has been off for a while, I hit the power button, fans & drives spin up, the optical blinks a couple times, but no video or POST. The LEDs look like 4 green, but 2 seem dimmer, as if they're just reflecting the light from the other 2. A 5-second hiit on the power button shuts it down, hit it again and it fires right up, but stops during post with the message that it's in safe mode and to reset my (nonexistent) OCs. From this point I can F1, boot up, and run for hours. No probs unless it's off for a while. I have seen the problem since early in the build, when I powered up outside the case with just 1 stick of RAM and the LEDs (no vid or drives).
    Searching the board shows a lot of people having the problem, but nobody seems to have a solution, so I went to the support site to check the knowledge-base and FAQs. Interesting to find there that A64 boards do not appear to exist. No FAQ, no option to spec socket 939 or 754 to search the KB.
    Maybe if we get a number of us with the problem to post specs & observations in one thread we can spot a pattern?
    I have noted that I can't just do an on-off-on. It has to spend 20-30 seconds in the lockup mode before cycling the power results in a successful boot.
    BTW all, some really nice things are happening with RAM prices lately. I got my 2 gigs for US$190 delivered.
    K8N Neo2 Platinum
    Athlon64 3500 (130 nm)
    2G (4 x 512) SuperTalent PC3200 RAM
    2 120G Maxtor SATA (1 & 2) in raid0
    1 160G Seagate SATA (3)
    1 Sony DRU 720A 16X dual-layer DVD +/- R/RW (primary master)
    PNY Verto nVidia 6800 vid
    Mad Dog 600W PSU (30A on +12)

    Quote from: elliott on 13-April-05, 09:23:05
    I'll give the bios a shot, but the idea of using the HT to slow the box down and then speeding it back up again in Winders...
    Putting HT to 4 does not slow down the box... Especially if ur FSB is over 200 (if ur overclocking) like in my case: FSB=260mhz, I must put down the HT to 4 in order to run everything perfect. HT standard is 200x5=1000, in my case its 260x4=1040... as long as HT is between 800-1200... I believe there is no real time performance loss as long as u have STABILITY. I have seen a lotta people in this forum fixing stability problems just by reducing the HT when they overclocking... some cases even to HT=3.

  • MSI K8N Neo2 Temp problems...

    I just got this board and plugged my FX-53 into it.  In an air conditioned room @ 60'F, a cold bootup and in the bios it says my Mobo temp is 30'C, CPU 40'C.  Within 30 seconds, the CPU temp shoots up to 55'C.  It then will then sporadically jump between 50'C and 62'C.
    I managed to install XP and all my drivers and I downloaded the MSI monitoring program and it listed my CPU @ 74'C and my motherboard @ 9'C...  
    I'm a bit weary because I don't want to fry my $900 cpu.  Is anyone else having problems???
    This is with an XP-120 heatsink installed w/AS5 (thin layer, not half the tube   )

    I noticed that everyone here is complaining about the High Temperatures from the K8N Neo2 Platinum Series for the Socket 939.  I too am having difficulties with the temps.  
    In core center it shows a Temp. at 140°F which to me seems outrageously high.  Tech support from MSI told me to physically touch the heatsink and if it felt hot or warm I may have a problem.  It did not feel warm at all.  However, MSI claims to not be having issues with the Temp readout on the motherboard specified.  (See below).
    Dear unsaid,
    The issue did not seen on this model. Please do physically touching the HSF on the processor to see if it’s warm on touch then you can know weather the readout is true or not, thanks.
    Sincerely,                                                
    Technical Support Division
    MSI Computer Corp.  
    1-626-913-0828
    1-626-581-7721 Fax
    I had the ASUS A8V Deluxe w/ wifi and switched do to some slow boot times and the fact that NVIDIA's chipset is usually better than VIA.
    Question is this :
    What good quality heatsink and fan should I get for the socket 939 chipset.  I see people posting about the Zalman 7000 and Venus 12.  But, is there a really good one without necessarily having to take the board out of the case and removing the backplate?
    I also see people claiming to have a bios of 1.2 or 1.3.  Where do you get these?  I can only find 1.1 and that is what I am running and there is no change in temps.
    If anyone has a great recommendation on the heatsink and fan please email me at [email protected]
    Thanks,

  • K8N Neo2 temperature problem

    Hi,
    I am having problems getting consistent readings from the temperature sensors on my new K8N Neo2 boards. I have Cool'n'Quite enabled in the BIOS. I am not overclocking the system. BIOS is version 1.2.
    The temperatures shown in the BIOS is Case = 37C and CPU = 42C. However, if I stay at the Healty section of the BIOS for a few minutes, the CPU temp. slowly crawls up to 48C.
    I use the nVidia System Utility to read the temps. in Windows XP, as this tools seems to be fairly consistent in reporting the temps. (opposed to CoreCenter and MBM5).
    At the initial startup (from cold) the NVSU gives me about 10C higher CPU temp. than at following warm boots. At warm boot the CPU temp. is 33-37C idle, and 62C heavy load (Prime95 toture test).
    It seems to me that the 1.2 BIOS is completly screwed up with regard to the sensor readings. I have thought about reseating the heatsink (Thermaltake Silent Boot with Papst sielent fan + AS5), but I am not sure that it is worth the effort.
    Can anyone else confirm the above?
    Best regards
    JASE

    Yeah. That's a fair recap of the situation at least as it seems to affect me. I went from being really obsessed about the temp to not really caring anymore after I spent $60 on a huge aftermarket heatsink and fan which did nothing but reduce the fan noise.

  • K8n neo2 platinum problems

     
    ok guys I've been looking all over the internet and cannot find any answers to my problem.
    I have an MSI K8N neo2 platinum running easybios
    AMD Opteron 146
    2gb Ballistixs pc4000
    30gb maxtor
    120gb maxtor
    2x dvd rw drives
    nvidia 6800 agp
    sound blaster live 24bit
    I run windows x64 and after flashing my bios form 1.6 (I think) to 1b I kept getting errors e.g. "ROM cannot invoke" (or something), and primarily "disk read error", now the disks show up in the bios, they show up in a windows install but it just won't boot from them. I have flashed to easybios and the rom error went away but the disk read one was still there. I am now reinstaling windows x64 but would like to know how to fix such a problem if it were to happen again. Both my drives are IDE and are on the IDE0 cable with master and slave correctly set.
    Also the temperature readings for my processor are 42 degrees celcius when everything is at stock and I have a zalman 9500 heatsink fan on it running at full speed. This is obviously wrong - is there any way to fix this?
    Thanks
    Daven

    I has the exact issue with my board, except it was with the SATA drives. I flashed with e few BIOS', and the newest one that worked correctly was 1.8
    If it was me, I would reflash to BIOS 1.8
    Post back with your results.
    Also, even though you are installing Windows again, it will most likely corrupt your installation, as it did mine, twice, before I figured out the problem.

  • K8N Neo2 plat problems. sound/boot/network

    I just love the mobo. One of the best I ever had. But recently Ive run into som trouble with it.
    When i boot it sometime hangs and the d-bracket tells me it is because of the floppy drive controller. Kinda weird since ive turned it off in the bios and I dont got a floppy connected. Ive read a little on this site and got to the conclusion that it is probably my PSU. A real cheap one that came with my case to around 30 €. Its only a 300w and it is due to a change. But i find it peculiar that i has run fine for several months.
    When i got the mobo and i booted it came with an boot option that had something to do with the network. If you pressed shift+f11 or something like that you would enter a menu where it was possible to configure several network boot options and the possibility to turn it off. I did and now i cant get it back? Not that i miss it but i might use it later on and i am sure it can be reenabled. But resetting cmos by jumper or removing the batteri doesnt do it. How do i do it?
    And then after messing around with a frontpanel audio thing in my case the onboard sound stopped working. Ive reset it to standard by putting the jumpers where they belong and not using the frontpanel. But still no sound.
    Guess that was all my trouble hope that youll be able to help me
    Thanks in advance

    Know pepole with same case/PSU as me (with "only" 17A on the 12V) and morew power demanding HW (9800xt) ... no probs anywere....
    I belive that poeple shuld be aware of that not all problems are caused by having a PSU with less than 24A@12V rail....
    I am getting a little tired of all the "Buy a new PSU" - answers... Willing to get in a debate on this.
    BTW - fromt his post: https://forum-en.msi.com/index.php?topic=72160.0
    MB : Neo
    GFX: 5900XT oc 460/850
    PSU : BeQuiet 400W 1.3 Color
    12 V rail : 20A
    Drive value : 5p
    Cpu : 2,2ghz@2,4ghz
    Status : OK
    MB : Neo2
    GFX: X800pro@XT PE 527/605
    PSU : BeQuiet Blackline 450W
    12 V rail : 5V 45A / 12V 22A / 3.3V 28A
    Drive value : 4P
    Status : OK, good overclock
    MB : MSI K8N Neo2-54G Platinum
    GFX: Connect3D Radeon 9800 Pro
    PSU : 400W Zalman (ZM400A-APF)
    12 V rail : 15A (1st generation)
    Drive value : 7P
    Status : OK, running GREAT
    MB : Neo2
    GFX: X800pro
    PSU : BeQuiet Blackline 450W
    12 V rail : 5V 45A / 12V 22A / 3.3V 28A
    Status : OK
    MB : Neo2
    GFX: 9600PRO / 128MB
    PSU : Seasonic 350W
    12 V rail : 19 A
    Drive value : 3p
    Status : OK
    ... and mine (signature)
    Also;

  • K8N Neo2, wierd problems

    Hey all, I am new here
    I looked through all the post but did not find anything related to my problem.
    I have had  my rig almost a month without any problems but all of a sudden the computer just rebooted itself right in the middle of a simple (not 3d) game. It just kept rebooting after it reached the Windows logo and I would get error message like "IRQ was not less or equal" and the great Windows has stop your computer because of hardware failer, system will shut down. I tried to do a restore but XP could not find the HD, when I tried to run XP from CD it would not load due to hardware failer and I could not get into safe mode. Sometimes in the BIOs the BIOs would be corrubted, get those greek letters and things, just sometimes.
    I stripped the thing down to just barebones, CPU, ram, vid and cleared cmos.
    I first determined that the onboard IDE controller was bad, when I moved my HD to the PCI IDE controller the errors changed but XP kept restarting, but it now gave me a NT loader error which took me to the ram.
    I pulled the ram and tried 1 stick at a time, turned out that 1 of the 512MB modules went bad, with that the computer started up and seemed to run fine. I connected everything back up and things still ran fine, just could not use the onboard IDE controller as Windows would not pick anything up on it. The next day I work on it some more, put the HD back onto the onboard IDE controller and it worked again.
    But then my PS2 mouse port went dead, switched back to my USB and all seems well so far.
    I used a VOM and checked the 3.3, 5 and 12 volt rails, all were within specs, no drops even under a stress test, CPU temps are fine.
    Anyone else have seen anything like this 
    I have already received a RMA from Newegg on the MB but before I send it back I want to see if there is a solution to my problem.
    My gut feeling tells me P/S but it test good. Been running 2 days now without any problems but I am worried that it may happen again.
    My other thought is that maybe a zener diode, cap or voltage regulator on the MB may be going bad.
    Any one have an idea about this, should I just send it back and get another MB or is this a growing MSI problem
    Thanks for any input.
    I have the following:
    Windows XP home with SP2, fresh install and all updates
    K8N Neo2 nForce3 Ultra, stock settings right now, BIO updated to 1.B0
    64 3500+ Venice, stock settings
    1 Gig PATRIOT memory, 2*512MB running dual channel settings all auto/ stock
    420W Vantec P/S, 420a
    ATI 9550
    80 Gig WD
    20 Gig WD
    Sony CD-RW
    52x CD-Rom
    PCI SiI 0680 Ultra 133 Medley ATA raid controller: Running slave HD and CD-rom on it, no raid setup

    JayBee;
    I used the VOM whilel running the stress test with everything hooked up, even played intense 3d games with the VOM connected back-probing the pins 1,2 and 11 (orange wires) of the MB power connector for the 3.3 volt rail and then back-probing the molex cable for my 5 and 12 volt rails.
    I cleared the cmos by by pulling the P/S cable then turning on the P/S to discharge caps, after this i used the "clear cmos" jumper and then went back in and set everything bak up.
    As I have said, even with just a basic setup, CPU, 1 stick of ram and vid I still got the problems, it wasn't until I moved my C:\ HD to the PCI IDE controller and the one bad stick of ram that I could get XP to start up.
    I moved the C;\ drive back to the onboard IDE and again XP would not load, the next day I tried it again and all of a sudden the onboard IDE were working again. The very next day while playing my PS2 mouse went dead, plugged my USB mouse in and have been playing ever since. Very wierd stuff, like a bad diode gate or somthing, don't really know.

  • Serious K8N Neo2 Platinum Problem

    Hello
    This is my long and sad story with this MSI board...
    As I mentioned above, I have a K8N Neo2 Platinum with a Athlon64 3500+ (130nm) and some Corsair TwinX 3200XL 2x512 MB. The recommended setting for this Ram is 2-2-2-5-T1, but with this setting, my system crashes in prime 95 after maybe 5 mins and under compiling a Gentoo-System. But on the other hand, Memtest 86 reports no error at all with this timing. Later I changed the Timing to 2-2-2-5-T2 and suddenly, everyting becames stable. I could compile two Gentoo systems (32 & 64 Bit) and ran prime 95 for more than 24 hours. I have nothing overclocked. I think the Board is the Problem here, because there are some other malfunctions. Sometimes it doesen't detect my IDE Devices at startup (DVD-Rom and CD-rw) or my ethernet card gets no connection, but everything is configured well. So I really dont know what to do. I feed my Memory with 2.75 Volt. I also flashed the mainboard to Bios-Version 1.3 but nothing changed...
    I hope anyone of you can give me a hint or something...
    Thanks a lot

    corsair ultra-low latency requires 2.75V according to their documentation. Also I have heard that prime95 has an issue with systems with 1024mb or ram in a certain test. Not sure I can't confirm but I do remember reading that somewhere yesterday.

  • K8N Neo2 Driver Problem with PCI Bridge.

    I updated the Bios on this machine last night to 1.04 from 1.03
    K8N - Neo2
    AMD 3500+ Retail Kit with Cooler
    Antec True430W 3.3v/28A 5v/36A 12v/26A
    OCZ 2X512 EL DDR400 PC 3200 Plat Ed Dual Channel
    Seagate Barracuda 120g 7200 rpm SATA
    TSST Corp DVD-ROM TS-H
    ATI Radeon 9000 64mb AGP
    Windows XP SP2
    It started acting funny several hours after the update of the Bios, this AM it spontaneously rebooted and when it came up there was an error message about a damaged or corrupt Windows system file and suggested inserting the Windows Disk, which was done and then the system booted into windows. But the found new hardware came up and wanted driver for the PCI bridge, which I wasn't sure where it was so I let it complete without finding it and this is the error when I go to control panel/system/hardware/device mgr
    Where do I get this driver? Is it on the driver disk that came with the motherboard? I don't remember having to install a driver for the PCI bridge.
    thanks

    OK I thought I'd post the resolution to my problem.
    After my initial posts the machine not only became unstable but it wouldn't boot into windows saying there was a corrupt Windows System File.
    1.  It occured to me that when I downloaded the new bios and applied it that I had failed to customize the DRAM settings in the bios. This was important because when I was building the machine I couldn't get Windows XP to install it always pooped out someplace early in the install.  At the time I was using default DRAM settings.  But I came here and read through the forum and found a sticky at the top of the forum that had settings for a number of different memory sticks including mine. So I went back and updated my bios with those setting. Voila everything was cool and I was able to load windows and move forward.   But I forgot that, and I attribute the instability of the system to that, wheter or not it was why the system eventually corrupted system board dirvers I don't know.  But I did change that, as the system would boot but just not boot windows.
    2. Next, I decided to attempt to repair my windows install.  However first since I had already applied SP2, and my Install disk was just the plain retail without any Service Packs.  I decided to make a new bootable install disk with SP2 slipstreamed into it so when I repaired I wouldn't have to reapply SP2.    Here's the method that I used.
    http://www.helpwithwindows.com/WindowsXP/winxp-sp2-bootcd.html
    3.  Utilized the windows repair feature of windows setup.
    4. That worked my computer now booted into windows and I didn't lose data or configurations....whew!!
    5.  I still how ever was stuck with the original problem that started this thread..rats!! I thought SP2 would fix that.
    6.  I tried several times to get XP to update the driver, but I couldn't.  I even tried to select the driver from the list that is one of the optioins when you are updating drivers.  I found some but I wasn't sure which one that had PCI bridge in it was the right one. But the fact that when I was looking at the list of mfg only Compaq and NVidia were available. So a light bulb went off and opened up MSI Live  and looked at what was available in drivers, and sure enought there was a NVida driver.  So I figured I have nothing to lose.
    7. Next I downloaded the latest NVida nForce3 system driverfrom MSI and applied.
    8.  Bingo that worked, no more yellow ?'s in my hardware list.
    Machine working fine now.  Still don't know if failing to insert the proper DRAM stuff caused this but it all started with the new bios so I am assuming it had some part.

  • Problems during NWDS startup

    I have installed Netweaver developer studio. When i tried to launch it , it gave me an error "Problem during start up". The log file show the following
    !SESSION Oct 22, 2004 18:26:15.579 -
    java.version=1.4.2_04
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86 -install file:C:/Program Files/SAP/JDT/eclipse/
    !ENTRY org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Problems encountered loading the plug-in registry.
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dtr.client.vfs" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.eclipse.ext.libs.iaik".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dtr.client.eclipse" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.dii" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dtr.client.eclipse".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.model" was disabled due to missing or disabled prerequisite plug-in "com.tssap.dii".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.viewmaps.java" was disabled due to missing or disabled prerequisite plug-in "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.library" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.col" was disabled due to missing or disabled prerequisite plug-in "com.sap.mw.jco".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.external" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.sap.sld.client" to "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.sld.namealloc" was disabled due to missing or disabled prerequisite plug-in "com.sap.sld.client".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.sap.tc.build" to "com.tssap.dtr.client.vfs".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.webdynpro.runtime" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.jcb.core".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.core.providers.dtr" to "com.tssap.dii".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.opensql" was disabled due to missing or disabled prerequisite plug-in "com.sap.exception".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.sqlj" was disabled due to missing or disabled prerequisite plug-in "com.sap.opensql".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.tssap.j2ee.ui.perspective" was disabled due to missing or disabled prerequisite plug-in "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ejb" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.589
    !MESSAGE Plug-in "com.sap.tc.security.https" was disabled due to missing or disabled prerequisite plug-in "com.sap.ide.eclipse.ext.libs.iaik".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.model.ext" to "com.tssap.j2ee.model".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Plug-in "com.sap.tc.cmi" was disabled due to missing or disabled prerequisite plug-in "com.sap.dictionary.runtime".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ejbjar" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.web" to "com.tssap.j2ee.ui".
    !SUBENTRY 1 org.eclipse.core.runtime 2 1 Oct 22, 2004 18:26:15.599
    !MESSAGE Unable to satisfy prerequisite constraint from "com.tssap.j2ee.ui.ear" to "com.tssap.j2ee.ui".
    !SESSION Oct 22, 2004 18:26:26.985 -
    java.version=1.4.2_04
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments: -os win32 -ws win32 -arch x86 -install file:C:/Program Files/SAP/JDT/eclipse/
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:26.996
    !MESSAGE Unable to find Action Set: com.sap.ide.help.actionSet
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:27.16
    !MESSAGE Unable to find Action Set: com.sap.ide.eclipse.component.provider.BuildActionSet
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:27.16
    !MESSAGE Unable to find Action Set: com.sap.ide.login.LoginActionSet
    !ENTRY org.eclipse.core.runtime 4 2 Oct 22, 2004 18:26:29.459
    !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.core.runtime".
    !STACK 0
    java.lang.NullPointerException
         at com.tssap.util.InstallationInfo.checkInstType(InstallationInfo.java:83)
         at com.tssap.util.InstallationInfo.getInstallationType(InstallationInfo.java:66)
         at com.tssap.util.UtilPlugin.startup(UtilPlugin.java:343)
         at org.eclipse.core.internal.plugins.PluginDescriptor$1.run(PluginDescriptor.java:736)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:748)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:112)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    !ENTRY org.eclipse.ui.workbench 4 2 Oct 22, 2004 18:26:29.479
    !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.ui.workbench".
    !STACK 0
    java.lang.ExceptionInInitializerError
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegatingLoaderException: "Plug-in "com.tssap.util" activation failed while loading class "com.tssap.util.trace.TracingManager".
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:116)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         ... 12 more
    !ENTRY org.eclipse.ui 4 4 Oct 22, 2004 18:26:29.479
    !MESSAGE Unhandled Exception
    !ENTRY org.eclipse.ui 4 0 Oct 22, 2004 18:26:29.479
    !MESSAGE Unhandled Exception
    !STACK 0
    java.lang.ExceptionInInitializerError
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at org.eclipse.core.internal.plugins.PluginDescriptor.internalDoPluginActivation(PluginDescriptor.java:722)
         at org.eclipse.core.internal.plugins.PluginDescriptor.doPluginActivation(PluginDescriptor.java:188)
         at org.eclipse.core.internal.plugins.PluginDescriptor.getPlugin(PluginDescriptor.java:306)
         at org.eclipse.ui.internal.Workbench$15.run(Workbench.java:1325)
         at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1006)
         at org.eclipse.core.runtime.Platform.run(Platform.java:413)
         at org.eclipse.ui.internal.Workbench$14.run(Workbench.java:1334)
         at java.lang.Thread.run(Unknown Source)
    Caused by: org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegatingLoaderException: "Plug-in "com.tssap.util" activation failed while loading class "com.tssap.util.trace.TracingManager".
         at org.eclipse.core.internal.plugins.PluginClassLoader.activatePlugin(PluginClassLoader.java:116)
         at org.eclipse.core.internal.plugins.PluginClassLoader.internalFindClassParentsSelf(PluginClassLoader.java:185)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassParentsSelf(DelegatingURLClassLoader.java:485)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:882)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.access$0(DelegatingURLClassLoader.java:876)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader$DelegateLoader.loadClass(DelegatingURLClassLoader.java:90)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.findClassPrerequisites(DelegatingURLClassLoader.java:554)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:890)
         at org.eclipse.core.internal.boot.DelegatingURLClassLoader.loadClass(DelegatingURLClassLoader.java:862)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
         at com.tssap.config.ConfigPlugin.<clinit>(ConfigPlugin.java:17)
         ... 12 more
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Oct 22, 2004 18:47:19.256
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:291)
         at org.eclipse.core.launcher.Main.run(Main.java:747)
         at org.eclipse.core.launcher.Main.main(Main.java:583)
    Caused by: java.lang.RuntimeException: Fatal Error: Unable to locate matching org.eclipse.core.runtime plug-in.
         at org.eclipse.core.internal.boot.PlatformConfiguration.locateDefaultPlugins(PlatformConfiguration.java:2264)
         at org.eclipse.core.internal.boot.PlatformConfiguration.<init>(PlatformConfiguration.java:903)
         at org.eclipse.core.internal.boot.PlatformConfiguration.startup(PlatformConfiguration.java:1368)
         at org.eclipse.core.internal.boot.InternalBootLoader.initialize(InternalBootLoader.java:582)
         at org.eclipse.core.internal.boot.InternalBootLoader.startup(InternalBootLoader.java:1035)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:838)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    !SESSION -
    !ENTRY org.eclipse.core.launcher 4 0 Oct 22, 2004 18:47:25.415
    !MESSAGE Exception launching the Eclipse Platform:
    !STACK
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.core.launcher.Main.basicRun(Main.java:291)
         at org.eclipse.core.launcher.Main.run(Main.java:747)
         at org.eclipse.core.launcher.Main.main(Main.java:583)
    Caused by: java.lang.RuntimeException: Fatal Error: Unable to locate matching org.eclipse.core.runtime plug-in.
         at org.eclipse.core.internal.boot.PlatformConfiguration.locateDefaultPlugins(PlatformConfiguration.java:2264)
         at org.eclipse.core.internal.boot.PlatformConfiguration.<init>(PlatformConfiguration.java:903)
         at org.eclipse.core.internal.boot.PlatformConfiguration.startup(PlatformConfiguration.java:1368)
         at org.eclipse.core.internal.boot.InternalBootLoader.initialize(InternalBootLoader.java:582)
         at org.eclipse.core.internal.boot.InternalBootLoader.startup(InternalBootLoader.java:1035)
         at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:838)
         at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
         ... 7 more
    Any Idea? HOw to get rid of this problem?.

    I have figured out the problem. Some of the plugins were missing from the installation source. I copied the missing plugins from other installation and it worked.

  • S939 K8N Neo2-54G Problem!!!!!

    S939 K8N Neo2-54G with a AMD64 3500, 1gb 3200 Ballistix memory, and a Rad x800Pro Modded to XT.  
    Graphics worked fine in a SB75G2 although with this combo the board just craps out on 3d within 30 seconds, sometimes blue screen sometimes VPU reovery and sometimes just a nice ol reset.  
    Just wondered if anyone else is having problems like mine, or if there is a solution?
    Tried hypertransport to 4 and slackening off mem timings to no avail?
    Any help would be appreciated
    Cheers
    GiB

    I had a problem with bluescreens on my Neo2 with 3500+ and mushkin 3500 level 2 memory. What i found worked was setting the timings to 2-3-2-10 from 2-2-2-10. Im not familiar with your memory but maybe try that? Also, check your PSU as the power demands might be higher on your new board and thats whats causing you problems.

  • K8N neo2 Plat problem with Inno3D 7600GS AGP, help pls...

    Just got the new Inno3d 7600GS AGP card, after installed & while booting up my monitor keep going off and on then suddenly just went off...sometime system freeze when it reach deskstop.
    Sometime lucky enough it will still there and the next few minute the system just freeze.
    After several attemp & no choice, I unplug the power to the graphic card and the problem still exist.
    I am using a HEC 350W PSU.
    I change back to my old ati9200se card & no problem at all.
    I changed to skyhawk 430W still same problem. even I boot up to safe mode still the same. Only time the monitor wouldn't go off untill it pass the winXP logo then the problem appear.
    I got no problem when go to CMOS as well.
    Already perform uninstall previous video driver, update latest nforce driver....all no use.
    K8N Neo2 Plat
    HEC 350W
    2 harddisk (1 SATA & 1 IDE)
    Any idea guys?
    Thanks

    What are your PSU amp for the +12V? What bios version are you using right now? Tried to disable the fast write in the Bios? Gd luck.

  • Tons of K8N Neo2 Platinum problems

    Ok, I installed this board 2 days ago and everything was fine, since then my USB has stopped working, and I mean all of them, even onboard.  My temp reporting has become ridiculous, like jumping from -127C to 200C Core temp.  
    Stystem Specs
    Athlon54 3200+ 939
    MS-7025 K8N Neo2 Platinum
    1gb (512x2) Kingston HyperX pc4000 (i've tried all different timings, none help)
    Gigabyte X800XT
    Audigy 2
    250gb Hitachi Deskpro SATA
    Thermaltake 550 Pure Power PSU
    Koolance pc2-650 cooling (CPU-300 block, vid-180H block)
    If you guys have already answered these questions I'm sorry to be asking again but I did scan thru 15 pages of posts looking for answers.
    Thanks in advance.

    Usually this comes from running the Nvidia System Utility.
    To fix, unplug power from back of PC.  Move CMOS reset jumper to clear position and leave for now.  Then remove the CMOS battery.  Wait about 10 minutes, reinstall batter, put CMOS jumper back in correct position, and finally plug in power.
    Your BIOS settings will be reset and you should first load optimized, reboot, and then you can go back in to BIOS to put your settings back.
    We've all been there done that.  Later

  • A few K8N Neo2 Plat problems

    Just getting this new rig up and going K8N Neo2 Plat with a 3200 Winchester 90nm CPU and 1GB (2x512) OCZ PC3200 Plat. rev2.  My memory is not showing to be running in Dual Channel.  and Sandra bandwidth is horrible to say the least.   I have flashed to the latest bios that MSI has on the site, are their any better ones?  I see some people running different versions of 1.3 bios, where are they?  I have two Barracuda 80Gb S-ATA set up on #3-4 Sata connectors too in Raid (0).

    Skeen, Duke is right. I have the same memory and you MUST use slot 1&2 for dual channel support. Look inthe manual on the page about memory. It gives 2 charts. The first one is for dual channel memory and the second one is for normal memory. Also I did a Sandra test that is somwhere here in the forums where I posted the results with 1&2 and 3&4 and 1&2 was slightly faster. Use them (the ones closest to the CPU).

Maybe you are looking for