K8N Neo2 riddled with the same problems as K8N Neo?
Hiya,
Noobie here gearing up for first build.
Ive been reading that the K8N Neo has had a lot of problems....
Is the K8N Neo2 Producing the same issues?
Proposed build in sig - Am i gonna run into a troubleshooting nightmare?
Thanks all!!!
Quote
Originally posted by iseethemtoo
Ahhhh, thank you very much.
It is these types of things im trying to iron out B4 I put the order in.
What do you think of the Antec 480 TruBlu?
As mentioned you should look on how many AMPS the PSU delivers on the +12v rail.
And as we can see here it has 22 amps on the +12v rail. Not too little but then again not much. I see no reason why you should go with a more expensive Antec over the Tagan.
Comparing Antec Trueblue with Tagan:
Tagan 480W
+3.3v 28 amps
+5v 48 amps
+12v 28 amps
Antec TrueBlue
+3.3v 30 amps
+5v 38 amps
+12v 22 amps
Tagan Reviews:
Hexus.net
Short-Media
Not to mention, it's under 20db most of the time
Similar Messages
-
I had my Imac27' for about 1 year (I bought it january 2011) , and it worked fine. But two days ago a problem started. The screen is turning black suddently, and it stay like that until I reboot it. It's not cool. The first time it happen it was hafter a very long days of video editing, I tought it was to hot. But now I just started up the Imac and 10 minutes later it happen. And now I transfer my desktop on my second screen, because the one of my Imac is constantly shutting of. What is this? Can I do something about that?
I´ve came across with the same problem and when I look out for solutions I found out that basically I had Three options
1.- Dim the brightness to the first 2 dots (that is the limit for me, anything above that shuts down again my screen)
2.- Replace an expensive part of the screen (about $900)
3.- Try with an external monitor to see if the problem was the screen or something else
What I did was to plug my flat screen to my mac with a Mini Display Port to VGA Adapter
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter?fnode =51
And… Problem Solved! now Im going to buy a Monitor that gonna cost me less than half of the replacement parts, my main monitor will keep siting down if i dim it above the 2 dots but at least I will have the other to work properly
So that´s that, I hope someone finds this helpful
P.S. Sorry if my english it´s not that good -
I have a Matrox DVI docking Station, it slows my mac, anyone with the same problem
I bought a matrox DS1/DVI thunderbolt docking station.
It slowed my mac.
Anyone with the same problem?
I' m thinking on buyong the Belkin docking station, but I don't want to have the same problems as with the matrox one, any comments on this?
I apreciate your responceDisable all Firewalls & Anti-Virus software...try again.
-
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]
-
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
Trouble to connect to wireless G routers after installed the latest update 10.10.2 . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)
-
Good morning , I bought my mac pro 13 ' in 2011 (OX 10.10) , in March 2014 I had to replace the video card , fortunately under warranty.
Today, after only eight months starting with the same problems !
I read online that some mac products in 2011 were put on the market defective , you can get a warranty extension or even a replacement mac?dubem747 wrote:
It looks like your phone has a some virus, use your computer to scan and remove it.
not possible for it to have a virus and a PC would not know how to scan the OS as its protected
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
Everytime I try to open firefox, it just doesnt open up. no matter how many times I click it. I tried uninstalling it and reinstalling it, but it continues with the same problem. what should I do?
You can disable autoupdate by following these steps:
Go to main menu > Tools > Options > click on Advanced tab > click on Update tab and then click on the round radio button that says ''Never check for updates (not recommended: security risk)''
Refer the attached screenshot -
I have recently purchased an Iphone 4s white 16GB. When camera is used with a flash the picture is white and hazzy. Anyone with the same problem?
Yep. Exchanged for black and that solved it. Too much light leaks through the glass on the white phone.
-
After a month of using CS6 Master, Acrobat ceased functioning. Many other customers with the same problem suggested deactivating Flash Pro to reactivate Acrobat. After following these instructions, the entire suite was deactivated and now dipalys a message that our trial that will expire in 10 days (in the middle of an upcoming charity event). Is there any way to reactivate CS6? Is the only option to delete all CS programs? Can we download CS6 again with the same product key?
In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt -
I have an iPod Touch 8GB 2nd gen and it's only showing connect to iTunes screen and not letting me past that as I have a password - Already reset and it just loops back to the same screen with the same problem.
Any idea what I can do to fix this?you can connect the iPod to iTunes in recovery mode:
Hold down the Home button and the Power button simutaneously, until the screen goes black and the device turns off.
Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
After around ~10-20 seconds, you will hear a noise (beep/ding) from your CPU as if it had just recognized a new hardware device
and restore it to default settings, in order to remove your password (or just remove your password directly from the iPod touch, in order to sync with iTunes) -
Message and no sounds - anyone with the same problem?
Hi,
since a few days I have always the same message (usually after I switched on the iPhone or after the iPhone was in the docking station and I took it out of the docking station):
"This accessory is not made to work with iPhone. Would you like to turn into airplane modus to reduce audio interference? You would not be able to make or receive calls."
After I pushed the button "NO" all the sounds are gone and I'm not able to hear iPod or YouTube without headphones. And people can't hear me very good, when I'm talking to them.
During the day the iPhone suddenly turns on, then I will get the above-mentioned message, I have to choose between yes or no and then the iPhone turns off.
I don't know what to do and why I have this message since a few days. I did a reset with iTunes several times now, but I have still the same problem.
Thanks for your help!
KatrinSounds like either the 30pin connector at bottom (where you plug in) is either failing (has an issue of sorts) or could just be dirty. Clean it up a bit (remove any lint) and see if it continues. If still an issue, make Appt at AppleStore or call 1-800-MY-IPHONE to have it fixed.
-
the podcast app is not fixed still wont download,did not find any solutions with anyones comments,they all have the same problem with this app.So how can you say the problem is fixed,get someone who knows how to really do something so it is not a recurring topic of frustration!!!!!
You might get more replies to this (but not from Apple, who you will recall, do not monitor these discussions) if you had posted in the Podcasts for iOS discussions, but never mind. At least in this post you've mentioned that your problem is with the Podcast App, something you didn't mention in your previous post. Consequently, my comments were based on "problems downloading Podcasts", not "problems with the new Podcast App".
(I don't use the new Podcast App, since I cannot install iOS 5 on my Touch. So I stick with the older method of listening to Podcasts on my iPod.) That said however...
It cannot have escaped Apple's attention that the new Podcast App has not been well received. Although these discussions tend to focus on what's wrong rather than what's right, it does appear that the App hasn't been well thought out.
In particular, the Auto Play feature, which - once an episode has finished playing, the "next most recent unplayed episode" will begin. Now, maybe I'm wrong but to me that means that it plays the Podcasts in reverse date order, so episode 19 will play after episode 20 and episode 18 after ep.19! That is how the iPod Classic plays Podcasts by default and the Classic forum is littered with posts from people who think this is barmy. (I think it's barmy too!)
I use an iPod Touch as well. Although not perfect, playing Podcasts on the Touch is far easier than on a Classic.
You are unlikely to find any "solutions" to the issues with the Podcast App, because the "solution" is for Apple to redesign it.
If you are assuming that the update of 25th july is a claim that it's fixed... oh dear! I notice that the App views, shown in the Store, still include that "tortoise and hare" screen with what appears to be the transport mechanism for a reel-to-reel tape deck. That alone tells me there is no real improvement to the App. It really is the worst graphic Apple have ever produced! I'll be surprised if anyone under 35 recognises that graphic as a reel-to-reel tape deck.
Actually, I have a question for you.
If you have the Podcast App installed on your Touch, does that mean that the previous method of listening to Podcasts has been removed from your iPod, or can you still access them in the Music App? If you can, abandon the Podcast App and use the old method. If not, please warn me in order that I don't purchase a new iPod Touch until Apple fix this!
Sorry I can't be the bearer of more positive news. -
Anyone with the same problem? My macbook pro is freezing on start up and I get the follin
My macbook pro is freezing on startup lately! It is wierd because I think the computer is still working, I can turn the volume up and down, and change the light in the keyboard and so on... But it still doesnt work.. I took a photo with my iphone? My macbook is kindda old I think it is from 2007. 2,4 ghz, Intel Core 2 Duo, 2gb mhz DDR2 SDRAM
I have installed version 10.6.8 on it..
Hope someone can help!Did you ever figure this out? I'm having the same problem now... I have a 2008 macbook pro, running mountain lino and it's been doing this.. I tried booking in safe mode and got the same result. Single-user mode didn't even run, and it just kept starting and shutting down without the screen turning on. Really weird.
Anyways, if you found a solution I'd appreciate it if you could let me know. Thanks -
I've seen a lot of postings about keynote crashing when doing simple copy and paste. I have the same problem, Keynote 9 v5.1.1 Is there a fix?
I had the same problem with the LCD after replacing hinges and could not figure this out.
To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery. I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........
Maybe you are looking for
-
Hi i'd like to know what is the $ symbol for and when it can be used. I've seen it in class definitions like "org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process" Thanks
-
[svn:osmf:] 17399: Improvements to the FMS stream reconnect feature.
Revision: 17399 Revision: 17399 Author: [email protected] Date: 2010-08-19 17:53:31 -0700 (Thu, 19 Aug 2010) Log Message: Improvements to the FMS stream reconnect feature. Modified Paths: osmf/trunk/framework/OSMF/org/osmf/net/NetLoader.as
-
Hi, When enabling FileVault2 on my Mid-2012 MacBook Pro with 10.9.3 I received an error. After that I completely installed the system new, created a new partition, etc. Right after the installation of Mavericks was completed, I tried enabling FileVau
-
How can i link REGUP table with RBKP table..
Hi.. I wanted to get a unique record from RBKP for each of the record found in the REGUP.. Can you please let me know if that is possible and if so what are the fields that you should be using to link both the tables... Apprecitate your help... Thank
-
To Format And Re-Install Or Not To Format And Re-Install?
I have been experiencing system failures quite a few times and taken my machine in to two different mac support centers for hardware tests both of which came back with no hardware problems. I then did and Archive and Install from the original discs w