K8N Neo3-F Mobo problem - Can't install winXP Pro

I am building my second computer.  The system consists of the following components:
K8N Neo3-F mobo
120GB Western Digital Hard drive ( SATA )
Floppy Drive
Sempron 3100 754pin
Pioneer DVR 111D
1GB memory ( single stick )
Video Card - MSI 7300GS 256
Can't get winXP to install.  Always get errors of some kind or other.  First error was the STOP 0x0000008E Page Fault and NON-paged area.  Then others
during subsequent reinstall attempts.  The page fault error only showed up one time.  Sometimes the installation failes only during the Registering Components part of the install.
During POST, the memory check comes back as OK.
Have used Western Digital's Lifeguard utility to check the hard drive, says OK.
Any ideas of what to do next ?????

Beaudog53,
Run Memtest86 and let it run for several hours. (What are the specs on your RAM?)
Also tell us about your Power Supply.
Take Care,
Richard

Similar Messages

  • How can i install logic pro on my macbook air

    How can i install logic pro on my macbook air?

    Welcome to the Apple Support Communities
    If you bought it in discs, buy the USB SuperDrive or use Remote Disc

  • Can i install logic pro without the cd because my dvd driver of my mac doesn't work . i have the key for logic pro

    can i install logic pro without cd ? , i have the key for the logic pro but my dvd driver of my mac doesnt work ?

    Buy an external USB2 DVD/CD drive..... (Amazon's Basic model works great)
    Or..
    Borrow someone else's Mac that has a DVD drive fitted and use that via Remote Disk
    Note:
    There is no legal means of downloading available for Logic Pro 9.. unless you originally purchased it via the App Store..
    Therefore, in your case, you must install from the DVDs you have...

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • Can you install logic pro on more than one system?

    How many systems can you install logic pro onto?

    I believe via the AppStore you get 5 licences. For the whole family.

  • Can you install logic pro onto more than one computer with the same cd key?

    can you install logic pro onto more than one computer with the same cd key?

    Only a desktop and a laptop, both of which must be Macs you own.
    (60296)

  • Can't install XP Pro on Satellite A200-25H

    Can't Install XP Pro on Satallite A200-25H
    During F6 install XP pro i use USB floppy drive and Intel 82801 HEM/HBM SATA AHCI drivers, and it lets me format drive NTFS.
    Then asks for Intel Matrix Storage Manager Driver. in Drive A:.
    THe Bios wont allow me to turn off SATA. In fact the CMOS is very bare bones
    After that I tried using a slipstreamed XP-pro install CD (with the sata driver included), but the result was the same
    It asks me to insert (Intel Matrix Storage Manager Driver. in Drive A:)
    For some strange reason do the USB floppy not even attempt to read the drive when pressing return.
    Any help would be appreciated, since I have run out of ideas
    Thanks

    Yes, Ive got an advice.
    In my opinion you should use the nLite software (its free) and you should include the SATA drivers to the new XP CD created with nLite.
    I did it last month and it was very easy. Everything worked perfectly!!!
    Google a little bit for more info regarding the nLite

  • Can I install Adobe Pro XI on a machine with Adobe Standard XI?

    Can I install Adobe Pro XI on a machine with Adobe Standard XI?@

    assuming you mean acrobat pro and standard, that may work, but it may not.
    more importantly, why would you leave acrobat standard on a computer that has acrobat pro?
    you should uninstall standard, clean (if you're using a win computer - Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then install pro

  • Hi, I can't install premiere pro trial version, probably because my Windows 7 is a 32bits edition. Is there any solution or 32b version of Premiere Pro to download?

    Hi,
    I can't install premiere pro trial version, probably because my Windows 7 is a 32bits (x86) edition. Is there any solution or 32b version of Premiere Pro to download?

    I am sorry , there is no 32 bit version for both Premiere pro cc as well as After Effects cc
    You may try CS 4 version , but it is not completely tested with Windows 7 OS. .

  • Can i install quicktime pro on 2 devices

    can i install quicktime pro on 2 devices
    Have upgraded to pro for laptop and now want to install on office PC, do i need to purchase again or can i use on multiple devices on one licence?

    can i install quicktime pro on 2 devices
    See paragraph 2 of the Software License Agreement for Quicktime.
    2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original. Except as and only to the extent expressly permitted in this License or by applicable law, you may not copy, decompile, reverse engineer, disassemble, modify, or create derivative works of the Apple Software or any part thereof. THE APPLE SOFTWARE IS NOT INTENDED FOR USE IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL SYSTEMS, LIFE SUPPORT MACHINES OR OTHER EQUIPMENT IN WHICH THE FAILURE OF THE APPLE SOFTWARE COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE.

  • Can I install premiere pro cs6 from mac os x 6?

    Can i install premiere pro cs6 from mac os x 6?

    System requirements for cs6
    http://helpx.adobe.com/premiere-pro/system-requirements.html#Adobe Premiere Pro CS6 system requirements

  • Re: Installing WinXP Pro SP2 / Boot Camp - Drive Bay 2 - which partition?

    I am stuck and I can't seem to find the answer through Google searches.
    I have a Mac Pro and I am working on installing WinXP Pro SP2 on a second SATA drive. It is a 500gb drive by Western Digital and it happens to be the same size as the Mac OSX drive - 500gb.
    Because they are alike in size I can't tell which is which in the installer. Here are my options:
    476938mb Drive
    H: Partition 1 (Unknown) - 476938 free
    476938mb Drive
    I: Partition 1 (Unknown) - 200mb free
    C: Partion 2 (Unknown) - 476938 free
    My guess is to install WinXP on the H: partition and I just want to confirm this as I don't really wish to wipe out my MacOS on the drive in Bay 1.
    Can anyone confirm this? I wished this was addressed in the Boot Camp Installation Guide. They only address one drive that is partitioned, not two seperate drives. Also nothing listed shows up with the label BOOTCAMP.
    Thanks in advance.
    Rob

    Pull your OS X drive.
    XP and Vista 32-bit only give you 1.9GB of RAM.
    If you don't need native access or 3D you might just want to later use it with Fusion, VirtualBox or Parallels.
    Apple uses GPT (GUID) which creates those small 200MB and 128MB partitions you see that are essential.
    For me, I would just format the drive as MBR, and FAT/MSDOS or if you have NTFS from MacFUSE or Paragon, format as NTFS (preferable), and pull OS X and then install.

  • Fail to install WinXP Pro on KT3 Ultra2

    Hi,
      I've been trying to install WinXP Pro on KT3 Ultra 2 box, but it always stalled at the point after it loads all the driver and says "Setup is Starting Windows" on the lower status bar. I notice a quick flicker on the keyboard light and the keyboard is no longer responding.
    My hardware:
    Athlon XP2200+
    MSI KT3Ultra2 Bios v5.5
    MSI G4Ti4200 128MB
    Corsair XMS 2700 512MB
    WD1000JB
    Adaptec 2930 SCSI w/ Pioneer 305S
    Antec Performance Plus 860
    Swiftech MCX462
    Default BIOS w/ 133FSB
    I also tried the install the same setup using an old Matrox Millenium II 4MB video card but if failed at the same point.
    Any clue will be appreciated.
    Thanks,
    David

    After reading a couple of posts that suggest users to remove all unnecessary devices during install, I decided to remove all my SCSI devices, take an old IDE CD-ROM drive, and BINGO.. the install went smoothly.
    I guess the problem has something to do with the SCSI card and its devices. Very strange. I didn't think that booting from a SCSI DVD-ROM could be a problem.
    Thanks again for all the replies!

  • K8N Neo3 ps/2 problem

    Hello
    I have a brand new K8N Neo3 with the following setup:
    A64 3400
    2Gb DDR400
    MSI 7900GTO
    SB Audigy LS
    Tekram DC395U
    Tekram U3W (boot device)
    When I use my good old keytronic keyboard on PS/2 connector, it work for some times then I get keyboard errors mostly for all boot.
    I have updated the bios to V1.7, disable/enable USB keyboard support, reset bios, not solution: work for some boot then dies.
    The keyboard is working ok on another setup, other PS/2 keyboard get the same issue.
    When I use USB keyboard, no problem.
    When I use the keyboard on USB/PS2 adapter, it works.
    Funny thing is when I plug usb and ps2, it boots, but the ps2 keyboard could be either running fine or not, blinking at every key entry.
    I couldn't find USB keyboard with the same quality as the keytronic, and the USB to PS2 adapter is not a solution since it is unusable for fast typing and games (key repeat issues).

    First check that the ground tab on the case IO Shield is making good contact with the mbrd PS/2 socket housing.  Sometimes older keyboards will just not work well with newer systems but if the keyboard is newish, you have a valid complaint for an RMA.  Having said that I've had problems with a Neo4-F's PS/2 mouse port - suddenly started just freezing the mouse after an hour or so of use; switched to a different mouse and same thing.  I can't help thinking there's something flakey about the PS/2 controller which MSI uses, since it's an issue which keeps coming up here.

  • K8n Neo3 cpu temperature problem

    Hi.
    I built computer for my friend with these specs:
    AMD64 3000+ socket 754
    MSI K8N Neo3 nForce4(it's Gold edition, no clue what's so special in it... no msi sticker included, say hello to marketing guys from me  )
    Asus Pci-e 6600GT 128MB
    DDR-400 some brand with Blitz chip, bios settings set to auto
    Western Digital 80GB ATA
    TEAC DVD-RW
    some 350W psu
    and the problem is the cpu temperature and kinda noisy fan... newest core center reports 41-42 degrees and 1390rpm when computer is idle, on mine it's around 35 degrees
    and 2800rpm. amd drivers are installed, power saving settings are set to minimum cool'n'quiet is enabled, d.o.t. is disabled, but still, core center reports speed as 210x10 = 2100mhz and it should be less when idle... 1000mhz or 800mhz they say... another interesting thing is that core center reports north bridge fan speed as low, while bios health status
    reports 7500 (!!!) rpm. what's wrong? please help.

    Qool and quiet turn off in bios !
    Quote from: laki on 16-December-05, 06:02:12
    Hi.
    I built computer for my friend with these specs:
    AMD64 3000+ socket 754
    MSI K8N Neo3 nForce4(it's Gold edition, no clue what's so special in it... no msi sticker included, say hello to marketing guys from me  )
    Asus Pci-e 6600GT 128MB
    DDR-400 some brand with Blitz chip, bios settings set to auto
    Western Digital 80GB ATA
    TEAC DVD-RW
    some 350W psu
    and the problem is the cpu temperature and kinda noisy fan... newest core center reports 41-42 degrees and 1390rpm when computer is idle, on mine it's around 35 degrees
    and 2800rpm. amd drivers are installed, power saving settings are set to minimum cool'n'quiet is enabled, d.o.t. is disabled, but still, core center reports speed as 210x10 = 2100mhz and it should be less when idle... 1000mhz or 800mhz they say... another interesting thing is that core center reports north bridge fan speed as low, while bios health status
    reports 7500 (!!!) rpm. what's wrong? please help.

Maybe you are looking for

  • Trouble installing snow leopard after hard drive replacement

    My imac hdd died last weekend. And the replacement hdd came in today. I went through all the steps in this guide https://www.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2389+Hard+Drive+Replacemen t/6284 And I am pretty sure I did it all correctly. Howe

  • Install fails due to ORA-12899: value too large for column

    Hi, Our WCS 11g installation on Tomcat 7 fails giving a "ORA-12899: value too large for column". As per the solution ticket https://support.oracle.com/epmos/faces/DocumentDisplay?id=1539055.1 we have to set "-Dfile.encoding=UTF-8" in tomcat. We have

  • Icloud emails reply to another address?

    Hi So I've tried everything I can think of and searched google for answers, when I send an email from my icloud.com email address to someone they reply to my yahoo.com address (which is my apple ID) is this a default or is this how it works? If I sen

  • CSS 11501 7.40 Monitoring the services on real servers?

    Hi, Just want to ask some basic questions, How can i monitor the services (ie 80 and 443) of the real servers. So that when the CSS11501 detects that one of the services of one of the real servers is down, it will not forward the traffic to that serv

  • Newbie: python hetting started with BAPI_PO_CREATE

    Hi, After studying the documentation and looking for some source code as an example, I am at a total loss and looking for some help. I do not understand how the PO_HEADER (LIKE  BAPIEKKOC STRUCTURE  BAPIEKKOC) parameter should be filled with data and