K8N Neo3 not recognizing Advantek and CNET NIC

I just got my motherboard this week after an unfortunate incident with my previous PC (it involved burning). I had 2 NIC's in that PC, a CNET PRO200WL and an Advantek ALN-101C. This new motherboard, K8N Neo3, has Gigabit LAN but it is not recognizing either of my previous NIC's, even when I disable the onboard LAN. Just to check that the NIC's were not the problem, I bought another Advantek NIC (the same model) and tried it with the same problem. Some more details: the old Advantek NIC causes the PC to not boot. The new Advantek NIC does not prevent the PC from booting, but is not recognized by Windows XP (no add hardware, driver install). I tried a manual install but it is still not recognized. The CNET NIC, on the other hand, is recognized by Windows XP and the drivers are installed. However, it keeps saying the network cable is unplugged. I noticed that the green light on the CNET NIC came on when I inserted it in the PCI slot (without the PC on) and has not come off since. My onboard Gigabit LAN works fine but I need 2 LAN connections working, one for internet and one to network with another PC. I am relatively new at networking and have only networked my 2 PC's with a crossover cable and using Windows XP network setup wizard.

Can you list down all your pc spec's in full details including the PSU with the Watts and the Amp?? Have you tried to changed others pci slot but test on each one of it? On the way round tried to test your existing NIC cards into other PC? Check whether it can be auto detect by Windows or not? Check your cabling whether is it loosen or unplugged properly?

Similar Messages

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem

HT4910 I can not back up my iPhone. it says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

I can not back up my iPhone. It says I need more storage space. I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up. Any ideas?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Updated To Snow Leopard And Now Not RecogNizing Admin and password

Did a search, but didn't find the same thing(Just new system not SAVING passwords).
I updated from 10.5.8 to 10.6.1. First off, many apps wouldn't open(Spinning ball), and when going to update the OSX further, the admin/password screen popped up, with no admin name, as well as no password. When inputting info, it says they're incorrect. I double-checked my account info, and it's just not recognizing me. I hesitate to do a fresh install because of the time it will take with all the apps to re-install(Plus I wiped HD 2 weeks ago). Any suggestions are appreciated.

Since this happened after installation, this forum seemed appropriate. However, after looking around more, found that a number of people(Although the minority)are having the same problem, and are talking in account and login, so off I go.

WiFi 3G IPad 2 not recognizing WiFi and only recognizing 3G. Have only had the device 4 days and was working until today. Now will not recognize WiFi and will only run on 3G.

Received new IPad 2 4 days a ago. Set-up WiFi on home network and 3G on At&T service all has been working until today. I turned 3G off Thursday so that WiFi was the primary source. Yesterday went to a friends house and IPad recognized WiFi and was able to use. Today not able to use WiFi at home only 3G. WiFi is working on my laptop so that is not the issue. Is there something that I am missing?

WiFi is on, but system is not recognizing it. I am not fimiliar with Ask feature, what is this? I have noticed from other posts that my WiFi indicator in the top left is grayed out. I have tried restore settings that some people have recommended. Sounds like alot of people are having problems with the newest launch of the IPad 2. I had put that I have the iOS 4.3.2 but it is iOS 4.3.3. Is there any problems with this operating system?

ITunes not recognizing iPod and iPod tunes vanishing

I have had this happen on three different occasions now. I plug my iPod in the USB port to update my podcasts and iTunes says it does not recognize "iPodName", please run iPod updater to restore. I then look at my iPod and find that all my music and videos are gone! Each time this has happened I have had to restore my iPod then reload all my content (a painfully long experience) and I would like to find out why this is happening and if there is anything I can do to prevent it from recurring. Also, is there any way to recover the content on my iPod so that I do not have to re-transfer all the content each time this occurs?
I have also note some quirks in iTunes where some (not all) of my podcasts are not recognized when trying to update them from the Internet. It is not always the same podcast.
I am concerned that I may have a corruption in some of the iTunes configuration files and am considering a daily backup up of these files as preventive maintenance. Are they stored in a subdirectory of the iTunes folder or the program directory?
Thanks in advance,
iPod 5G 60 Windows XP Pro

Well before you install that new Harddrive, or if your system is acting "Funky" do a backup of all your music and iTunes ASAP. go to here to follow instruction on backing up in iTunes http://docs.info.apple.com/article.html?artnum=302392
If all your music is in the "My Music" folder you can just back up that whole folder to CD. this will make a backup of all your music AND a backup of the iTunes Library file so you will not loose any playlist you have created, rating, playcounts and the like. to do that put a black CD in, goto "My Music" then at the top select Edit>Copy to folder. in the window that appears pick your CD drive, whatever letter it is (Usually D drive) and hit OK. your system may bog down for abit but once windows as made a CD image it will burn it to the CD and there you have it

MacBook not recognizing Keyboard and trackpad

Our white MacBook has suddenly devepoped the problem of not recognizing any of the internal input devices. A dialog box appears seeking keyboard and trackpad connections over bluetooth on the desktop after start up. I was able to work around this with a USB keyboard and mouse. What might be the problem?

sorry you say your built in trackpad. and your built in keyboard. reboot. reset your pram. maybe your smc
see if that helps

I have an Iphone 4s which I bought used, its unlocked and i put it on T-mobile. I see that the person who was using it before may have been Chinese, my computer is not recognizing it and itunes either. What can i do?

I want to Delete everything in it, but since it cannot be recognized by my computer and doesn't show on Itunes, I cannot do it. It has some a jailbreak which the last user put into it, might be Redsnow, and most of the app's and other stuff on the phone I cannot use it only says loading after I press it and then dissappears. The last user may have been Chinese, in which he put a chinese jailbreak and since i changed the language etc. of the iphone some things show up as little squares instead of normal english format. Please Help, Ive been looking all over google etc. and tried to fix it myself but nothing has worked.

I have the same problem with my 4S too, if the slider won't even let you slide, the it's most likely that the WiFi module inside the phone is broken
Take your phone to a Apple store and let them see if I'm correct
This is a common issue found only on 4S, Apple gave me a new 4S because of this

Music files in my PC's iTunes directory have been moved around, now iTunes' index is not recognizing them and returns error messages. The files have previously been sync'd to my iPod, but when I tried to sync back from the iPod, iTunes on the PC error'd.

I want iTunes to reconstruct its index of my music.
We accidentally moved files around in my <<C:\Documents and Settings\Jordan\My Documents\My Music\iTunes>> directory. We tried to move them back, but anyway, the iTunes program now no longer can find/play the titles that the opened iTunes page/Library displays.
I had previously copied/syncd all my iTunes music to my iPod. I tried syncing back to the PC from the iPod. No improovement.
At the moment, my dad is on my computer, logged in under his name (with administrative permissions). It seems that looking at my iTunes music under his login is still working OK.
I do not have my music backed up to the "cloud".
What are my options?

The "missing file" error happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
If another application like Windows Media Player has moved/renamed the files then the chances are that subtle differences in naming strategies will make it hard to restore the media to the precise path that iTunes is expecting. In such cases, as long as the missing files can be found somewhere, you should be able to use my FindTracks script to reconnect them to iTunes. See this post for an explanation of how it works.
If you have to resort to trying to pull back the library from your iPod see Recover your iTunes library from your iPod or iOS device.
tt2

Macbook Pro Late 2008 not recognizing battery and not charging

Hello
i really need some help please
i have a Macbook pro 15" Late 2008 running os x 10.7.4
i will say briefly how did the problem begin and what is the problem
it stopped charging for some reason the magsafe light was (and still is) dim green and at the battery icon it said not charging but after a couple of hours that it was turned off and connected i found out it is charging really slowly
later on that week
i was using an app called DSLR remote connected to my camera i left my macbook on the table outside connected via usb to my camera waited on it and came back
when i came back my mac was out of battery
i took it in hook it up to the magsafe nada nothing not charging dim light
so what i did i knew my magsafe charger is ready to be changed so i bought a new one
tried it same problem
later on did an smc reset
it did turn on biw the fans are really loud the battery icon (x) and it said no batteries available
so i tried my old fastly drained battery it used to hold up about 1-2 hours then i bought another battery but that was in the past
so i tried both batteries smc reseting with both same result
the smcfancontrol app says fan speed 000 rpm and temoerature 0 C
and one more thing when the mac is off and not connected to the magsafe i click on the battery indicator light on the left side i get a flashing light (battery empty needs to be charged) when i connect the magsafe it stops working even when its off and while its just connected
so it is and SMC problem
it has been like that for the past 4 weeks or so
i really need some help
and im from israel so no apple genius bars around =_= and i have a good technical knowledge
Sincerely, Sari Hassoun

its not about solving or not its about trying to
i understand nobody wants to make any harm to my macbook
thats reasonable
anyway its a hardware faliure of some sort i'll need to check it my self but now im almost sure its not software because i've tried many things
my other option is to run it off a battery
the thing is my battery is out so when its attached the battey indicator lights do work (they are controled by the SMC) that might solve it too
thanks for replying really
its appreciated

SAP JCO 3 - Not recognizing ABAP_DEBUG and USE_SAPGUI

We are in the process of converting a Java application to use JCO 3.0 in order for it to work on the Intel based Macs. The code conversion has gone well so far and I have successfully been able to connect to a SAP system using the new connection methods. In previous versions of JCO I was able to set AbapDebug to true on the Client and this would bring up the SAP GUI in debug mode when I executed a RFC. In order for this to work I had to create a script that would call the SAP GUI application. I also had to set an environment variable called SAPGUI to point to this script. The script would called the SAP GUI JAR file and pass on any parameters passed into it.
The problem I am experiencing with JCO 3 is that I cannot get this to work. The new version of the SAP GUI 7.10 R4 has changed some of the parameters to start the GUI and I have changed these in my script file. If I call the SAPGUI command with a connection string on both systems (JCO 2 and JCO3) I get the same result. The SAP GUI is displayed and is requesting logon details for the requested server. This seems to prove that my changes to the script worked. Prior to the script changes the SAP GUI would not be displayed on the JCO 3 system.
An interesting observation is that the connection properties use an enum (eg. DestinationDataProvider.JCO_ASHOST) to set the individual properties that make up the connection. This enum does not have anything related to USE_SAPGUI or ABAP_DEBUG. I am desperately hoping that this functionality hasn't been forgotten in the port to version 3.
I know this is a new connector but I am hoping that someone can shed some light on what changes I would need to make to get this to work.
Thanks,
Charles

Hi Charles,
any progress with your problem? I've a similar problem. I have to call BAPI_DOCUMENT_CHANGE2 to change an original of a DIS.
This won't work unless a SAPGUI is attached to the connection. With JCo 2.1.8 I set the connection property USE_SAPGUI to 1 or 2
and everything works fine. After connecting there is a SAPGUI running in background and during the BAPI call the SAPGUI starts
a saphttp.exe with managed the file transfer to the Server. In Jco 3.0 I'm missing this property, as you do. No SAPGUI, no saphttp.exe, but also
no error or exception from BAPI_DOCUMENT_CHANGE2 and no filetransfer from client to server.
regards,
Boris

Computer not recognizing Ipod and my ipod freeze

My ipod used to work quite fine, but not from today. When I plugged in my Ipod and load up my batteri, it worked as normal. Then when i unplugged my Ipod, it still says, that it is connected to the computer? I can't turn it off or start it. My computer also now tells that it can't recognize the software and my itunes can't find my Ipod either. Any suggestions to make it work again?
Thank you
sara

First try updating iTunes to version 7.0.2.
Here's the iTunes download.
iTunes download.
Then see these.
iTunes 7 doesn't recognize the iPod.
Your Windows PC doesn't recognize iPod</font color</a>.

I have a g/drive 2T, power is on but the computer is not recognizing it and I can't set it up for back up

if anyone knows how I can fix this problem please let me know. I have tried theSMC start up, and even tried plugging the G/drive into a different outlet to see if it was a power issue. The power light to the G/drive is on, but I system preferences can not find it to set up time machine.

Support site for G-drive
http://support.g-technology.com/support

Mail not recognizing ZIP and PDF attachments

Since upgrading to Leopard, I have received a few emails with attachments in my work IMAP account. Some of the emails are fine (the ones with XLS and DOC attachments) and others display the attachment as a bunch of encoded text in the email (ZIP and PDF files).
Thunderbird can read all the emails just fine, so I think that the problem is that some kind of mail setting is screwed up or it is a bug in the Apple mail client.
Does anyone know why Apple mail would not recognize the data as an attachment?
Here is an example of what shows up in my email:
--Apple-Mail-17-830733730
Content-Type: multipart/mixed;
boundary=Apple-Mail-18-830733730
--Apple-Mail-18-830733730
Content-Type: text/html;
charset=US-ASCII
Content-Transfer-Encoding: 7bit
<html><body style="word-wrap: break-word; -webkit-nbsp-mode: space; -webkit-line-break: after-white-space; ">Attached is the latest QuickRef in booklet form, ready to print.
</body></html>
--Apple-Mail-18-830733730
Content-Disposition: attachment;
filename=svquickrefv3.5-booklet.zip
Content-Type: application/zip;
x-unix-mode=0755;
x-mac-type=5A495020;
name="svquickrefv3.5-booklet.zip"
Content-Transfer-Encoding: base64
UEsDBBQAAAAIAFieXzct4eWqZKoOABN9DwAcAAAAc3ZfcXVpY2tyZWZfdjMuNS1ib29rbGV0LnBk
ZrybdzyVbeD/FSJlHTPztrI5e0SySdl7b1nZJAopSSSjjFBEZZeZmS2h7BnKLKOMbKrvqR7P7/s8
------------ bunch of encoded text deleted ----------------

We are having a problem were Preview cannot display the text of an attached PDF in an email. Really strange. Shows the formatting of lines and grids graphics etc. But the text is blank.
Acrobat can open and show the file, the text is there.

Blackberry Link - not recognizing device and does not allow synching calendar and contacts

I cannot get Blackberry Link to work properly on my laptop running Windows 8.1 Pro. It takes a very long time to open and it does not allow me to sign in saying there is no internet connection and I cannot get around resolving this issue. That is problem 1. Problem 2, Blackberry Link sometimes recognizes the device and sometimes it does not. Problem 3, when I do get Link to recognize the device, (it can backup), synching the calender and contacts on the device to Outlook does not work. I try to do a one way synch from the device to outlook and it processes but Outlook is not updated (outlook has no contacts or calendar events as I want to pull them off my device).
Any ideas? Thanks.

Hello RankinWilbur44
Welcome to http://supportforums.blackberry.com/
Visit this Article ID: KB34374
Check this information
I hope it's a good help to your problem.
Via: sdgardne
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/How-To-OTA-Sync-BB10-and-non...
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

K8N Neo3 not recognizing Advantek and CNET NIC

Similar Messages

Maybe you are looking for