K8N Neo3 Unable to use keyboard in BIOS setup

I have a K8N Neo3 motherboard
System info:
1 gig memory
AGP GeForce FX 5500 128 MB DDR AGP 8X
AMD Sempron 3000+
I start up the system and I hit del key to get into the bios setup, the BIOS setup screen appears but when I hit enter key on my keyboard nothing happens, I tried several other keyboards with the same results. If I do not hit the del key at start up it asks me to hit the F1 key which I do and I get no response???
The memory and CPU info comes up at boot and no problem there??
Please advise, many thanks

Quote from: BG84 on 17-July-06, 05:40:09
try to reset cmos.remove baterry and leave for 10min, while reseting with the jumper or button
Many thanks for the help, your procedure that you suggested did work for me and now I was able to setup my bios.
Many thanks once again.

Similar Messages

K8N Neo2 Plat and 1.B0 - No BIOS Setup Screen

With K8N Neo2 Platinum (MS-7025):
After flash to 1.B0 version, from 1.90, boots normally. But, hitting Delete key to go to BIOS Setup, all I get is a blank screen with a white cursor in upper left - Won't go to BIOS Setup.
Went back to 1.90 with no problems.
Is this a known problem with 1.B0 version?
Papa_K

http://homepages.nildram.co.uk/~chsmith/Syars_Bios_Collection/NEO2/
It's 70251b0.zip. A modded version of 1B that you can reach thru the above thread found in Syar's sig.
Let us know if it works for you too.
JB
EDIT. I recommend winflash. Don't use liveupdate.
If you loaded live update on your computer then you have winflash. Go to C:\Program Files\MSI\Live Update 3\FlashUty\Award but use it carefully, shutting down all other programs and selecting the boxes to clear cmos etc. as described here:
https://forum-en.msi.com/index.php?topic=86257.0

Unable to use keyboard (return or enter) to select install

Hi All;
am attempting to install XP and when I get to the screen with 3 selections: 1) press r to repair; use f3 to I don't recall or press enter to install XP I get no input through the keyboard, I am using an I-Mac with the standard usb keyboard, have been unable to find any tips on apple site.
Thanks, Wiki

Since no one else is jumping it I’ll suggest the general cures of
SMC reset
http://support.apple.com/kb/HT3964
and PRAM reset
http://support.apple.com/kb/PH4405
You have tried quite a few cures so if these don’t work take it to an Apple Genius Bar for a free diagnosis and estimate of repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .

Unable to use keyboard without Caps Lock on

Hi Guys, I gave my keyboard a little bit of a clean the other day (with relevant wipes) and since then my keyboard is not functioning correctly. It did turn itself on once or twice during the process, so I have clearly hit something I shouldn't have
The problem I have is that I can't use the keyboard without enabling the CAPS Lock. Without using the CAPS Lock pressing random keys, produces random effects (mainly functional things) and with the CAPS LOCK on I can type normally, just all in caps (for this I am using my desktop!)
Troubleshooting to date:-
Accessibility => Mouse & Trackpad => Enable Mouse Keys (off) always has been
Accessibilty => Keyboard Preferences => Short Cuts => Restored to Default
Accessibilty => Keyboard Preferences => Input Sources => British
Accessibilty => Keyboard Preferences => Modifier Keys => Restored to Default
I have a setup another user account but the problem persists in all accounts
I have tried other applications but the problem is replicated
I have rebooted several times to no effect
OSX 10.9 (all updates up to date)
Any help would be greatly appreciated.
Thanks in advance.
Oh additionally the track pad seems to be doing slighly random things ie standard run click actually brings up sub menus!

Since no one else is jumping it I’ll suggest the general cures of
SMC reset
http://support.apple.com/kb/HT3964
and PRAM reset
http://support.apple.com/kb/PH4405
You have tried quite a few cures so if these don’t work take it to an Apple Genius Bar for a free diagnosis and estimate of repairs.
Genius reservation http://www.apple.com/retail/geniusbar/ .

K8N Neo3 don't work with MSI RX850XT PE?

I want to buy a MSI K8N Neo3-F to use with my VGA AGP RX850XT PE but in the PDF linked on the specifications page ( http://www.msi.com.tw/html/products/mainboard/agr/7135agr.pdf ) my VGA isn't listed.
Works or not?
Tnx a lot

You're going to want to find a proper agp board to drop that vid card into.
The AGR slot isn't a full fledged agp slot so even if it did work with it, I doubt it would perform up to it's fullest.
I'm a fan of msi boards, but if you're looking for something that would allow you to upgrade to pcie in the future, I believe that asrock is the only mobo producer making a board that has both PCIe & AGP slots.

T540p: BIOS setup not starting

Hi,
I have a brand new T540p with Windows 8.1. I did all configurations needed, Windows is working.
Problem:
Pressing F1-Key (+ Fn or not) during system start doesn´t start the BIOS-Setup. Instead Windows is starting.
My questions are...
- Is there any problem with my T540p?
- How can I start the ThinkPad BIOS-Setup?
- If it is not possible to use the ThinkPad BIOS-Setup: What are the alternatives to configure BIOS?
Thanks a lot!

Holding Shift while invoking reboot from within Windows will get you to the appropriate "Choose an option" screen as well.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

No BIOS update of K8N Neo3?

K8n neo3 has been sold for a long time,
but I still can't find any bios update.
I use 754 sempron 2800+ and can't adjust CPU VID.
And every time I write an email to ask if there's a bios update, I got nothing but some links of FAQ.
What should I do to tell MSI I really want a bios update for NEO3?

Send an E-mail to the costomer support of MSI ,explaining your problem.If you're lucky they will give you help and even a costom(or beta ) Bios.

I am Unable to Type or use Keyboard in Firefox 18.0 anywhere including URL bar and Search Bar. how should rectify this?

I am unable to type anything or use keyboard to type in Firefox. I am using Firefox 18.0 installed on Windows 7.
I am able to Paste into the URL bar and also the Search bar but absolutely not able to type in it.
I have already tried the "reset" option but still unable to type.
Also tried Firefox in safe mode with disabled addons but still unable to type.
Installed a fresh copy of firefox after uninstalling Firefox and deleting the old folder "Mozilla Firefox" from windows. but still unable to type.
Please tell me a solution to this.

I'm not on a laptop so I don't have a FN key. But on my desktop F9 + Windows key appears to have resolved the issue for me. Thanks for the help!

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Unable to use the keyboard in XP keys work OK when boot into dos

Unable to use the keyboard in XP. It was working for over a year OK with XP running
keys work OK when I install win98 or use a dos boot disk.
If I try to reinstall XP I can not use any of keys to input anything.
Return
Esc
CapsLock
ctrl-alt-del.
NO KEYS WORK AT ALL OTHER THAN
ë à
I did an upgrade from win98 but that did not work.
Any ideas

billwyatt, welcome to the forum,
I think you forgot to mention which ThinkPad you have. It would be even better if you could post the Type and Model Number as this will help members to hopefully help you. If it ends in CTO please provide some details about the ThinkPad. Please do NOT post your s/n.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

For expert, user used K8N-Neo3 mobo

hi! i think can pc is too old,so i want upgrde my pc.but my porblem is the power supply .......
1.my psu is Enlight 420W PSU+ (20 pin) ,can i use for this mobo (K8N-Neo3 mobo/24pin)
2. the power are enough for used? (cpu will be buy sempron 2800+/3100+/3400+)+gefoce fx 5200+ 80gb SATA
maxtor HDD
Enlight 420W
+5V= 40A; +3.3V= 30A; +12V= 18A
-5V= 0.3A; -12V= 0.8A; +5VSB=2A
thanks.......................

Power of this psu is enough for this configuration. Probably this mobo can run with 20pin, but my advice is buy adaptor (20pin to 24pin).

I am unable to use my keyboard with out a delay, how do I fix this

I am unable to use my keaboard with out a delay. How do I fix this?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

K8N Neo3 ps/2 problem

Hello
I have a brand new K8N Neo3 with the following setup:
A64 3400
2Gb DDR400
MSI 7900GTO
SB Audigy LS
Tekram DC395U
Tekram U3W (boot device)
When I use my good old keytronic keyboard on PS/2 connector, it work for some times then I get keyboard errors mostly for all boot.
I have updated the bios to V1.7, disable/enable USB keyboard support, reset bios, not solution: work for some boot then dies.
The keyboard is working ok on another setup, other PS/2 keyboard get the same issue.
When I use USB keyboard, no problem.
When I use the keyboard on USB/PS2 adapter, it works.
Funny thing is when I plug usb and ps2, it boots, but the ps2 keyboard could be either running fine or not, blinking at every key entry.
I couldn't find USB keyboard with the same quality as the keytronic, and the USB to PS2 adapter is not a solution since it is unusable for fast typing and games (key repeat issues).

First check that the ground tab on the case IO Shield is making good contact with the mbrd PS/2 socket housing. Sometimes older keyboards will just not work well with newer systems but if the keyboard is newish, you have a valid complaint for an RMA. Having said that I've had problems with a Neo4-F's PS/2 mouse port - suddenly started just freezing the mouse after an hour or so of use; switched to a different mouse and same thing. I can't help thinking there's something flakey about the PS/2 controller which MSI uses, since it's an issue which keeps coming up here.

Hmm I believe my K8N Neo3 board killed my VGA cards.

First off pc stats needed before anyone can help.
-MSI K8N Neo3 MS-7135
-Bios (AMI rev 1.0)
-AMD Athlon 64 2800+
-Infineon, DDR 400 1GB
-Aeolus GeForce 6600GT PCIex16
-ENERMAX EG365P-VE(FM) ATX12V 350W
-Hard Drives: SAMSUNG SpinPoint P Series SP1604N 160GB 7200 RPM IDE
-Windows XP Pro SP2
Okay I bought a 6600GT PCIe and after a while the card displayed HORRIBLE graphical glitches so I got another and that did the same. But in between cards I used my old ATI Radeon 9700 All-In-WonderPro in the AGR slot. So I know for a fact all my other parts are functioning well its just either the cards are bad or maybe the motherboard's PCIe slot is somehow killing them. If I RMA the board back how long would it take to get back to me and does anyone else think its the motherboards slot?

PSU's are the heart of the system. This is what provides the power to use all the components. Weak or failing powersupplies can manifest themselves in many different ways. Initially the PSU may be able to give enough power to run the system, but overtime if it is worked too hard the PSU will be unable to keep giving that power continuously. This could account for the benchmarks working fine for a while then the system slowly starts to have problems. With going back to your 9700 card between the RMA's it could allow the PSU to "charge" back up so it is able to give another run for awhile before it craps out again.
This still seems more like a power issue then anything else. It may be worth it just to try another PSU rather then replacing the motherboard. It would at least be an easier thing to do. A lot of local retailers most likely have a 30-day return policy and that would give you more than enough time to determine whether or not that was the problem.
Quote from: DarkHayoto on 23-September-05, 17:33:32
Note: Also MSI core center would not work correctly when I got my motherboard. It would lock up when it began to run and eat 99% resorces.
Unfortuantely Core-Center is not a very stable program. Most of us dump it and use another monitoring software such as speedfan. It is a much smaller program and is very simple to use. Plus it uses almost no system resources. My laptop has been up for over 3 days and speedfan is using 3MB of memory and 3MB in the pagefile. And it has only 2min of CPU time.
Good Luck
Jeremy

Report: K8N Neo3-F Cool boot problem!!!!

Hi all,
I've got Cool boot problem on my new K8N Neo3-F. The power is often turned off suddenly just after I turned on the power switch. All components are shutted down while the power led blink. It's unable to turn off completely by pushing power switch for awhile. I usualy have to disconect the power cord then clear cmos and cool boot again.
This problem seem to occur more oftenly when using SATA HDD. Should it be attituted to a bug bios?

Something along what you already have on +3.3v/+5v but 20A or more on +12v (single +12v PSU model) .
But when the time comes to replace PSU it's wise to get one that has enough power that will serve the next build or upgrade also .
Not leaving you again in the same situation you are now one more time down the line .
Note that HD's are notirious power eaters .They all may have nice numbers from the manufacturers for write/read consumption
but it's not many that specifies spinup consumption which always are altleast 2-3 times the amount of read/write power demands.
Tagan 2power/2force is nice and is applicable to both 20/24 pins systems and has the ability to run the +12v line as one combined or dual .
They also come in different sizes (max wattage) .

K8N Neo3 Unable to use keyboard in BIOS setup

Similar Messages

Maybe you are looking for