K8N Neo4-F: Could something be wrong with my LAN chip/jack?

I am stumped.  Internet connectivity on my family PC (provided via ethernet connection to a D-Link router), which I built with a K8N Neo4-F, just stopped cold.  Now, I'm fairly knowledgeable about this stuff, so here's what I've tried. 
-The router in question is also a wireless router, and computers connected wirelessly (2 others) work fine. 
-If I take a wireless USB card and plug it into this computer, it also works fine via the wireless connection.
-If I hook another computer up to the router via the ethernet connection, it works fine (so I don't think there's anything wrong with the router's ethernet jacks). 
-I have changed the TCP/IP protocol of the MSI board's LAN connection in various and sundry ways, from obtaining an IP via DHCP to an assigned private LAN address. 
-I have, several times, hit "repair" under the connection's properties (which resets many things). 
-I have run a virus scan with Panda, which also rebuilt the communications protocols. 
I wanted to try to uninstall and reinstall the LAN adapter itself (via Device Manager), but the computer freezes up every time I try to do this.  I HAVE disabled and then reenabled the adapter via the BIOS, which didn't work. 
I cannot PING out from a command line.  The oddest thing of all is: I can't even PING or surf to the router's address itself (i.e. access the router's admin page at 192.168.0.1), which you ought to be able to do simply by plugging in, even if there IS NO Internet connectivity. 
I guess what I'm getting at is: Is it possible that there's something wrong with the hardware itself?  I'm at the point where all I know to do is wipe my drive and reinstall Windows fresh.  If it turns out that the connection still doesn't work, I could just buy a cheap LAN card or even another wireless card. 
Is there any way to test the hardware itself?  Is there something obvious here I haven't tried?
Ideas??
Help!
-abs

You can test your system hw for stability in two ways .
1. www.memtest.com , make a floppy disk or cdrom and test the systems memory , no errors shall pop ut in any of the 9 tests .
2. Download a live linux cd ( like knoppix ) and run the knoppix os from cd .
Btw:
One NF4 mobo problem is :
The IRQ number for ethernet controller (NVIDIA's NIC) share the same IRQ with the SATA/IDE controller .
Another is NAM (nvidia firewall w/active armor and offloadable set )
Some say it works better with the eth /enetbus drivers from the AMD/Intel X16 driver package .
You find alot of info about theese issues here , and possible workarounds :
http://forums.nvidia.com/index.php?act=Print&client=printer&f=34&t=4978
Edit:
Ohh..
I just remembered this one :
Shut down PC and remove AC from the PSU .
This makes standby voltage go out on the motherboard .
After you boot up again the lan should be working again .
After that go on lan/nic properties - Configure - Power Management tab - remove the tick on "Allow the computer to turn this device off to save power"
https://forum-en.msi.com/index.php?topic=91475.msg658537;topicseen#msg658537

Similar Messages

  • Something's wrong with iTunes

    Something was wrong with my iTunes before but then I deleted it and redownloaded it. It doesn't have the same problem anymore but now there's a new one! The iTunes License Agreement window pops up but then disappears! It happens really quick so I can't click on "I agree"! What am I supposed to do!?

    hi Can!
    I have the same problem... I cant listen to my music that i have bought online and transfered from CDs.
    what problem are you getting here? are you getting an error message when you try to launch itunes? are you just getting a "flash" of an itunes or quicktime screen? are you just getting an hourglass (in which case are you also running Norton Internet Security 2005)? or is something else happening?
    please describe your own symptoms in some detail. (err on the side of too much detail ... there's could be a bunch of different things going on.)
    love, b

  • When I try to connect my iphone to itunes it will not work, but when I connect an ipod it will. This is telling me something is wrong with my phone I am jsut not sure what that is. Can someone help me.

    I was trying to update my music last night. But itunes told me it needed to be updates first. So I updated itunes, and my phone. But now when I connect my phone using the usb. It will not connect to itunes, all that comes up is a phone icon on my desk top(which doesn't allow me to do anything with) But when I connect an ipod it does connect to itune and I am abble to look at how much room is left, and the option to restore ect) . SO this tells me something is wrong with my phone it self. Does anyone know what I can do to fix this problem?
    Thanks.
    PS my lap top is running the new windows 8.

    Hi,
    Start Here:
    http://www.apple.com/support/iphone/assistant/phone/
    And See Here:
    http://www.apple.com/support/iphone/syncing/

  • My final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

    my final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me.  I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

    What did Apple tell you about what they did (or did not) find here?
    See if working on the main disk is any faster.
    USB2 is glacial, as I/O interconnects go.  And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too.  FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
    Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

  • "Something went wrong with running Nokia Xpress" A...

    hello there,
    out of the blue the nokia xpress browser on my asha 501 does not start anymore: it just shows the blue background with the globe icon. when i press the back button, the following message appears:
    "Something went wrong with running Nokia Xpress"
    - I have subsequently updated the phone software to version 14.0.4
    - I have run the troubleshooter tool under "installed programmes"
    ("Debug <Ovi Browser> connecting on port 2800")
    - I have restarted the phone
    nothing helped.
    is anybody familiar with the problem and might assist with some help?
    thanks in advance
    *chris.

    Hi Chris,
    I had the same problem but I managed to solve this today (04/12).
    Follow the steps below:
    Be sure to backup your files.
    1. Settings (configuration) > Reset phone
    2. Click OK. Wait restart your phone.
    3. Run Nokia Xpress and DON'T upload your backup.
    I hope that your problem was solved.
    And, after this situation, when your phone ask to keep the old files of the browser, click on No.
    Bye,
    Pedro HSB
    If this helped you, please, give to me a Kudo Star, so I can contribute further, but, if this didn't help you, contact me and we gonna solve your problem together.

  • "Something went wrong with your request. Please try again later."?

    I ordered a Retina MacBook Pro on the 24th. Today, I went to check the status of the order and it redirected me to https://secure1.store.apple.com/ie/order/sorry saying:
    Something went wrong with your request. Please try again later.
    The only place I can get to is the account homepage. Anyone have any idea whats wrong?
    Cheers.

    Hi Fionnr,
    If you are in USA then you can call them their toll free number 1-800-275-2273 or otherwise if you have an Apple ID then you can raise a request on https://expresslane.apple.com/GetproductgroupList.action
    They will help you further. 

  • Something went wrong with sync. between pc and Ipad now part of the information is gone on the ipad how do I put the backup from the pc to the ipad

    Something went wrong with sync. between pc and Ipad now part of the information is gone on the Ipad. How do I take the backup of the pc and put it back on the Ipad.

    Same thing just happened to me.  Help!

  • Something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    something went wrong with my apple tv and now it says that it is in retail demo mode. How can i fix it?  I have had it for more than one year without any problem

    To turn on/off retail mode, go to settings, general, legal.
    Do not open legal, just put the cursor there.
    Then, on the remote, type this sequence : right - right - left - center.
    The AppleTV should reboot.

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • Something is wrong with XMLsocket

    alright , I am using XMLsocket class, actrionscript 2.0
    (flash 8). I have set up appache server on port 1024, and I can
    connect without problems. But something's wrong with sending test
    data (I am using log file to check for incoming server requests)
    the code is this:
    quote:
    var theSocket:XMLSocket = new XMLSocket();
    theSocket.connect("localhost", 1024);
    theSocket.onConnect = function(myStatus) {
    if (myStatus) {
    TraceTxt("connection successful");
    } else {
    TraceTxt("no connection made");
    theSocket.onClose = function () {
    trace("Connection to server lost.");
    function sendData() {
    var myXML:XML = new XML();
    var mySend = myXML.createElement("thenode");
    mySend.attributes.myData = "someData";
    myXML.appendChild(mySend);
    theSocket.send(myXML);
    TraceTxt("I am trying to send: " + myXML);
    sendButton.onRelease = function() {
    sendData();
    theSocket.onData = function(msg:String):Void {
    trace(msg);
    function TraceTxt(strMessage:String)
    dtxMessage.text = dtxMessage.text + strMessage + "\n";

    Hello Alana,
    Do these songs/tracks sound okay in iTunes?  Have you tried resetting your iPod to see if that makes a difference?  To do this, press and hold both the Select (Center) and Menu buttons together until the Apple logo appears. 
    I would also try a different set of headphones/earbuds to see if that makes a difference as well.
    And if the problem still continues, try restoring your iPod via iTunes and reloading all your music back over to it.
    The last you may want to consider doing, if nothing from above resolves the issue is to rerip these tracks into iTunes.  Try importing them in a different format or at a different bit rate to see if that makes a difference.
    B-rock

  • Something is wrong with your Unlocator setup.

    when i go into "  CBC.CA an error comes up saying "something is wrong with your unlocator setup "   i dont what to do or how to fix it

    Where are you located?
    Why type of network are y oconnected to?
    Home?
    Business setting?
    Free wifi?
    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • "Something is wrong with Plug-in SS Masks and Composing" ???

    Whenever i start up iMovie is get a prompt that reads "Something is wrong with Plug-in SS Masks and Composing". What does this mean and how can i fix it?
    Thanks,
    Bryan

    ... where can i look to see what plug-ins i have? ...
    in Finder click thru..:
    user(the house)/library/iMovie/plug-ins...
    when iM is quit, drag the plug-ins to some other place...

  • Something is wrong with Searching - Just Hangs 7AM UTC

    Something is wrong with Searching - Just Hangs 7AM UTC

    Paul,
    Something is wrong with your posting. I have no idea what you're searching for on what system. Many more details are needed.
    Joel

  • Something's wrong with my Adaptor

    My iPod mini's about 6 months old now (but it's the pioneer model), and most of the time I use the power adaptor to recharge the battery (the one that was provided in the box). For some reason every time I connect my iPod mini to the adaptor it just won't charge. Why's that? And can I get it serviced since I'm still under warranty? Help!!!!

    If something is wrong with your AC charger better let it be checked.

  • Something's wrong with my Integer.parseInt...

    hi...I think something's wrong with my code.
    when i don't add the loop for(int s = h; s > 0; s--) { }, it's correct, but when i do, it shows:
    java.lang.NumberFormatException: 27.0
    at java.lang.Integer.parseInt(Integer.java:414)
    at java.lang.Integer.parseInt(Integer.java:454)
    at chiayaochien3.evaluate.find(evaluate.java:55)
    at chiayaochien3.evaluate.operate(evaluate.java:48)
    at chiayaochien3.Main.main(Main.java:10)
    Exception in thread "main"
    (But i am sure the things in Integer.parseInt is String...)
    public class Main
    public static void main(String[] args)
    String[] data = {"3","+","12","*","27","/","1","-","6", "+", "222"};
    String[] operStack = null;
    String[] numStack = null;
    myStack num1 = new myStack();
    myStack num2 = new myStack();
    myStack oper1 = new myStack();
    myStack oper2 = new myStack();
    int calculateNum1 = 0;
    int calculateNum2 = 0;
    String calculate1 = null;
    String calculate2= null;
    String oper = null;
    double resultNum = 0;
    double result = 0;
    int operSize = 0;
    int numSize = 0;
    int h = 0;
    for(int i = 0; i < data.length; i++) {
    String f = data;
    if(f.compareTo("+") == 0)
    oper1.push(f);
    else if(f.compareTo("-") == 0)
    oper1.push(f);
    else if(f.compareTo("*") == 0) {
    oper1.push(f);
    h++;
    else if(f.compareTo("/") == 0){
    oper1.push(f);
    h++;
    else if(f.compareTo("^") == 0){
    oper1.push(f);
    h++;
    else
    num1.push(f);
    }//end of for
    for(int s = h; s > 0; s--){
    while(!oper1.isEmpty()) {
    calculateNum1 = Integer.parseInt((String)num1.pop());
    oper = (String)oper1.pop();
    if(oper.compareTo("*") == 0) {
    calculateNum2 = Integer.parseInt((String)num1.pop());
    resultNum = calculateNum2*calculateNum1;
    num2.push(String.valueOf(resultNum));
    while(oper1.isEmpty() == false && num1.isEmpty() == false) {
    oper2.push((String)oper1.pop());
    num2.push((String)num1.pop());
    }//end of while
    }//end of if
    else if(oper.compareTo("/") == 0) {
    calculateNum2 = Integer.parseInt((String)num1.pop());
    resultNum = calculateNum2/calculateNum1;
    num2.push(String.valueOf(resultNum));
    while(oper1.isEmpty() == false && num1.isEmpty() == false) {
    oper2.push((String)oper1.pop());
    num2.push((String)num1.pop());
    }//end of while
    }//end of else-if
    else if(oper.compareTo("^") == 0) {
    calculateNum2 = Integer.parseInt((String)num1.pop());
    resultNum = Math.pow(calculateNum2, calculateNum1);
    num2.push(String.valueOf(resultNum));
    while(oper1.isEmpty() == false && num1.isEmpty() == false) {
    oper2.push((String)oper1.pop());
    num2.push((String)num1.pop());
    }//end of while
    }//end of else-if
    else {
    num2.push(String.valueOf(calculateNum1));
    oper2.push(oper);
    }//end of else
    }//end of while
    while(!oper2.isEmpty()){
    oper1.push((String)oper2.pop());
    while(!num2.isEmpty()) {
    num1.push((String)num2.pop());
    while(!num1.isEmpty()) {
    System.out.println(num1.pop());
    while(!oper1.isEmpty())
    System.out.println(oper1.pop());
    }//end of main
    }//end of class

    "27.0" is not an integer. (Well, it is numerically, but it's a representation of a double.)

Maybe you are looking for

  • Mac won't recognize my Sony DRX-830UL-T DVD burner

    Hi, I have successfully used this burner in the past, but for some reason now my computer won't recognize the existence of my burner. When I go to Toast and attempt to burn movies, it only recognizes the DVD machine that comes with the computer, whic

  • Enhance Standard Infotype 1005 in HR

    Dear All, Please suggest how to enhance standard infotype 1005 - Planned Compensation in HR.Transcation PM01 is not allowing to do so ...as no CI include is attached for the same. Please guide. Regards, Subhash

  • Can we implement iphone native application on microsoft windows machine

    Hey, Right now i m doing job and i want to work as a free lancer but i don't have mac machine at my home so i want to know that how can we develop iphone native application on Microsoft windows machine or not?. One friend is said that it is possible

  • Account Disabled by Apple Staff

    My account was disabled by Apple Staff as they misunderstood my complaint. Now they are telling me they cannot enable it as ACCOUNT SECURITY can only do it. They have told me to call ACCOUNT SECURITY to get the account enabled again but the numbers t

  • Auto Numbering During PDF Combine

    Hello. When I combine files that have numbers for filenames, Acrobat likes to reorganize the order before the combine. ie: 1.pdf 10.pdf 11.pdf 12.pdf 2.pdf 3.pdf 4.pdf 5.pdf 6.pdf 7.pdf 8.pdf 9.pdf Obviously, I would like 10 to come after 9. Is there