K8n Neo4 Onobard sound --- Center channel is output on stereo sources

Isn't it odd that the onbaord drivers send output to the CENTER channel by default, even though the source is 2 channel? Everything is working, but I'd rather this did not happen. Anybody else notice this?

Quote from: not2savvy on 22-January-06, 22:29:21
This may or may not be relevant.
I, too, have a K8N NEO4-F and found that Win XP didn't jive wel with The NVidia IDE driver that comes with the board, so I just didn't install that driver and my PC works just fine using the standard Windows driver.
Same experince here with Neo4-Platinum and Nvdia IDE driver.

Similar Messages

HELP! K8N NEO4 SLI - SOUND PROBLEMS WITH INSPIRE 7.1

People, i bought K8N NEO4 SLI, and i'm having problems with my Creative Inspire 7.1. I have certain that everything is connected in a correct way, drivers ok, but the side surround speakers doen't make no noise. Creative media is set to 7.1 channels and the speakers too...
I'm thinking that the onboard audio is a bul....
Can someone help me with this? Who here has the same kit as me?
Thanks a lot
Edinho
(brazilian guy)

Man, i'm using those standart cables offered with the product....i thing its analog, i don't know certain...
i'm very about this onboard sound...
and the worst thing, i'vc contacted creative for explanation about it and they answer me that they could'nt help, cause it's a OEM product...no response about it, have to contact MSI..
here in brazil, it's real difficult, cause anoyone cares about it...
i have absolut certain that software and hardware configuration/instalation is ok...cause i had those speakers in other PC...
i've already head tons of audio-problem topics here, and i say: K8N N4 SLI Integrated Sound is a bul...

K8N Neo4 Platinum Dual/Single Channel issue

Hey guys,
Ive searched trough these forums, but i cant find the answer.
I have a K8N Neo4 Platinum with a Corsair XL (TWINX1024-3200XL)1Gb Kit, and i just cant find how to run it Dual Channel, every time i boot it says Single Channel @ 201 MHZ..
I am running a Athlon64 3700+ San Diego CPU
Please help..
Kind regards,
Patrick

thanx dudes, a big for the help!

Help - K8N Neo4 SLI - sound inputs TOO LOUD! (SoundBlaster Live!)

I have two sources for Line In sound; XM Radio and Leadtek TV Tuner Card. In both cases, the sound going from the card is so loud it is distorted even at only 1% of volume on the Soublaster Mixer. This happens whether I plug them into my Line In or Microphone inputs.
Does anyone have any ideas how I can "Tone Down" the signal, so I can turn the sliders up to at least a few percent without it distorting?
Thanks for looking - thanks even more if you respond.

Hi there,
You probably have activate some enhancements in the mixer like 'Mic Boost' or 'Digital Input' those are found in the right side of the mixer they are tick boxes.
Untick them...
Sorrryyyy.....the above is for the ALC 850 chip not for the Creative one....so I'm in the dark, but try to uninstall the drivers and install them again maybe it works.
BTW keep us posted....
Be well....

Center channel audio bleeding into left channel

When working on the audio mix for a project I discovered that dialogue would bleed into the left channel for some reason although the panner is set to center exclusive for that track. Can anyone else replicate this problem or can an expert chime in to confirm if this is a bug? It's definately bugging me
EDIT I am on 2014.2

with Premiere Pro CC 2014.2, build 8.2.0, I do not have any success with the center channel isolated with the stereo or mono audio
how about a work around with using an adaptive track, then channel output map the stereo input 1 and 2 both to output 3 (center channel)

Booting problem MSI k8n neo4

Hello. When I first made the computer I was a having a simular problem however now I can't fix it. When it gets to the DMI pool it doesn't read the HD instead it says boot from cd: NO DISK FOUND INSERT SYSTEM DISK. Originaly I would set the boot priority to my ide hard drive(which doesn't have an OS) and it would load the OS which is on my WD sata Hard Drive. I've tried everything I can think of. Help!!!!! Thanks
AMD Athlon 64 3200+
MSI k8n neo4
1 gig dual channel ram
Western digital 120g sata HD
Western Digital 8g IDE HD
Radeon 700 Video Card

bryant_4christ,
Take the comp to 1 HD and one Optical Drive, then run the install with the CD, when Windows first starts, hit the F6 when it tells you to and load the Drivers from the Floppy. The continue with the install, if you do not want to lose any data, make sure you tell it to use the current partition and to keep the files intact on the Format Screen, you do not want to format.
Also make sure you have the controller turned on in the BIOS for the SATA Drive and that it is in the Boot Order.
Take Care,
Richard

RMA'ed K8N Neo4 Platinum board, no sound on the new board's output

Hi Folks,
I just got back the replacement for the K8N Neo4 Platinum boad I sent in a month ago. The good news -- my mirrored RAID array came back up and my WinXP/SP2 setup looks fine. The bad news -- my front speaker output doesn't put out any sound. My Amplified 2.1 speaker set was plugged into my older machine and working fine, and I just swapped the speaker cable into the green output plug on my MB, and no sounds comes out. Sounds was working on the previous MB which I sent in for RMA, so the software on my HDD's should have been set correctly to generate sounds on the new MB.
First, any suggestions on how to get the sound outputs working? Second, any pointers on how to diagnose what's going on? Should I be seeing "Realtek '97" (or something like that) for the playback and recording devices, for instance?
Thanks in advance for the help!
Clark

Couple of things come to mind. Power on the system and head on' over to the bios. Ensure the audio onboard is actually turned on...or if the board they sent you had it disabled.
Check the Device manager for any "!" in yellow next to anything in the audio dept. (windows control panel/system/hardware...yadda yadda....) If the onboard audio is turned 'on' and windows is seeing it? You'll have a heading for AC '97 listed, and also under sound effects options in the control panel it should be listed. If it's listed as working 'ok'? I seem to remember a set of jumpers on the motherboard for audio output. In the manual it's listing as follows:
"If you don't want to connect the front audio header, pins 5&6, 9&10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise the line-out connector on the back panel will not function" That's out of my manual regarding JAUD1 connector. And I have the Neo4 K8N board.
Best of luck!
S-

K8N Neo4 Platinum SLI Sound Problem

I've recently build a system using the new K8N Neo4 Platinum SLI nForce4 board, which has the Creative SoundBlaster Live! 24bit onboard. The problem being the volume of the sound output (analogue) is extremely low. All volume controls in Windows are all set to full volume, but the sound output is still very very low. I consider myself pretty good with computers but with this problem I'm stumpted. Anybody else had this problem? Any insite would be very appricated.
Various info:
With my old SoundBlaster Live! Value the sound is fine
System Specs:
K8N Neo4 Platinum SLI
Athlon64 3500 Winchester
1gb PC3200 (Crucial ValueSelect RAM)
nVidia GeForce 6800 256mb
WindowsXP Professional w/ SP2
Any help will be appreciated

Ive been wanting to set up a new system based of this same motherboard, but all the power supplies Ive found so far have either been brands Im not familiar enough with or I havent been able to find a definitive answer on if the power supply supports that -5V pin(usually both, unfortunately). Can anyone point me in the right direction for a PSU under US$100? Any suggestions of power supplies anyone has had success with will also be greatly appreciated.
Ive spent about the past three days searching and have finally reached my wits end.
Second edit:
I double checked the diamond forum link (it gave a link not found page the first time), I did get to see what was posted there, but since most online retailers and manufacturer websites dont give the best view of the main connector, thats not alot of help. The only websites Im comfortable ordering from also do not evne carry the suggested power supplies, or any other unit by those manufacturer.
FINAL Edit (I promise...kinda):
I double checked on NewEgg (and then double checked FrozenCPU.com), and I found one from OCZ that doesnt totally blow my goal of USD100 or less out of the water. Lists a -5v supply, and is 24 pin for the motherboard:
http://www.newegg.com/app/ViewProductDesc.asp?description=17-104-155&depa=1
Same thing for 129.99 on FCPU, which is where Ill be ordering the power supply from.
I dont have any real need for the onboard adjustment dials of the more expensive series, and I really like the modular PSU design, not to mention the blue color scheme will work well in my blue-illuminated case.
Now, are there any other hurdles I need to be aware of?

MSI K8N Neo4 Platinum SLI sound needs -5V; newest Antec 550W has no -5V rail

I came within a whisker of ordering a non-returnable 3700 Venice, MSI K8N Neo4 Platinum SLI mobo and an upgraded Power Supply, Antec's newest 550W PS the TP2-550 EPS12V ($117). This has dual 2x24pin 12V 19A rails and is touted as the new V2.0 EPS12V/ATX12v compatible power supply for high performance SLI systems. By accident I came across a page at MSI for this mobo
http://www.msi.com.tw/program/products/mai...ail.php?UID=641
At the end is this warning: MSI Reminds You...
• For this model, you must use a Power Supply which has a -5V pin supply. Also, the users manual which I downloaded on Pg 2-10 says the same thing
The above Antec PS specs do not show a -5V rail, nor does an Enermax 600W I looked at. The V2.0 specs for ATX12v which added 2x24pin 12V rails dropped -5V rail from the spec and it appears MSI is not conforming to the spec (See Antec response at end) None of the web sites selling these PS & mobos contain any warning. I vaguely recall from a forum a while back it may have something to do with the Soundblaster system in the mobo.
http://www.antec.com/us/productDetails.php?ProdID=22551 (click specifications)
Isn't this a major showstopper which is going to cause a lot of grief for those of us upgrading to SLI systems using this mobo and upgrading our PS to the newest & best power design? We won't know the PS won't work until we build the system.
Regards, Ron
Antec reply to me:
>>>>Thanks for the link. Since MSI's website does state the motherboard needs the -5v, the True550EPS12V will not work with this motherboard. The Standard (http://enhanceusa.com/documents/atx12v_v2.01.pdf) has removed the use for the -5v rail and it is no longer needed. MSI has not manufactured that motherboard to the Standard. Finding an ATX12V v2.0 power supply with the -5v might be hard to find. You should contact MSI for a compatibility list of power supplys that were tested to work with the K8N SLI Platinum.

Quote from: ccve3 on 21-May-05, 07:27:40
Wow!! syar2003 thanks for that post. I've spend an hour going through it & fasteddies links. Now I are a power expert. The dual rail argument is enough for me to go back to the MSI K8N Neo4 Platinum SLI with one of the single rail PS -5V units listed by fasteddie. The only question left now refers to computerpro3 recommendation on ultra power supplies for SLI
>>I quite simply wouldn't dream of putting anything else in my machine. Keep in mind, this section is for 2x 6800 models, not the 6600's which most any good psu will handle (like Antec Neopower, ocz 520, etc). . Pc Power and Cooling 510 Deluxe SLI edition (refer to list)
2. Zippy/Emacs 550-700w models
3. OCZ 600w (personally I would get the pcp&c for the price, but it's been proven here, so I'll be fair...).
These are really high end, expensive and only 3-4 choices. Since I'm getting one 6800GT and eventually another & possibly eventually a 4800 X2, I was hoping the OCZ 520W would do it but computerpro3 says Powermaster 520 isn't good enough for SLI. I found that there is an OCZ 600W ATX12 dual rail which surprisingly has a -5V rail needed for K8N Neo4 SLI Soundblaster. Will this meet computerpro3's preference for a high end PS for SLI systems even though I'm losing the 1 rail advantage. Maybe the 600 Watts just overwhelms the 1 rail/2 rail question.
Thanks again for the teriffic help
Regards, Ron
Wondering what you settled on. I got the Antec TP550 and it's flawless on the board. I even have the older 20pin model which works perfectly (including sound). If you really wanted what I would consider to be a top dog (pcpower and cooling), and find the -5v rail missing, all you have to do is place a phone order and request they add a -5v rail. It's a minimal cost and a total solution for having everything. Just my $0.02

Audigy 4 (Non Pro) and center channel surround sound - from 2 channel aud

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Hi all,?Is there a way to have voice coming from the center speaker during TV programs like you could using an external receiver with Pro Logic? I can't for the life of me, get my Audigy 4 to do this. I run MCE 2005 on a couple of machines in the house. On my other machine, with built in audio, I let the Purevideo decoder handle this and I get? a nice surround, complete with center channel voice on it while watching TV. On the machine with the Audigy 4, not only will it not give me the center channel while watching TV, but I can't get it to stop processing the sound so that I can simply use the decoding of the Purevideo Decoder... Stumped!?Thanks,?Stu

Various types of sound out of center channel on

So lets see, quicktime movie trailers, music in winamp, games,?MSN nudge sound, ?-they all come out all 5. channels (Z-5500s)?But the audio for flash movies I've had on my computer, some WMP videos, MSN new message sounds - these are all center channel only - and werent on my last system.
another thing - if I change the audio settings under control panel to quadraphonic - they do come out all the speakers, back to 5....... center channel only. its very distracting and stupid to not be utilizing all the speakers for things like a video. whats the deal here? Thanks for the help in advance.

apparently the issue might be that the X-Fi/console just plays mono encoded material through center only?
i preferred when it utilized all the speakers for things like that anyways on my audigy gamer...
is this the case?
edit: CONFIRMED. I found the msn sounds, and haha the NUDGE IS STEREO and the TYPE is MONO. Explains everything! now to get Creative to fix it....
Further:
with CMSS3D off, mono will play over both R and L, just with no seperation of course. (but then your rears center will never be used by pretty much anything outside of games)
with it On XPAND, it will play through center only. (4 not being used)
with it on SURROUND, it will play through center and rears, but not front L and R. (the 2 most important ones arguably not being used)
seemingly on my Audigy , all speakers would be used even for mono sources. So am I correct in guessing they changed things?
All speakers should be used for mono sources.
Can creative update this in a new driver?
EDIT: ARG I just found out it only happens in "entertainment mode" at that! Game mode does 4/5 (not centre). What is the reasoning for this?Message Edited by deusfaux on 03-0-200609:2 PM

When testing speakers form the Sound mixer....no center channel so

I have a Sound Blaster Audigy MP3+ sound card, everything has been find up till now. When I test the speakers in the 5. configuration from the sound mixer the voice gives me sound out of each speaker except the center channel. I have updated the drivers etc.
I can hear sound through the center speaker but not during the test?
Any ideas?

this might help or maybe not.
has your sub got a setting for direct mode. if you have set it to direct, then check your setting in organizer/player.
eax, mixer, speaker settings.
john

HT204291 I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on

I have my apple TV plugged into my Denon receiver. My receiver is setup with 3 speaker channels, one center, one left front and one right front. When I listen to music via Airplay, sound comes only from the center channel and right, nothing on the left. When I watch Cable Television (not using the Apple TV), all 3 channels work fine so I know that the speaker connections are fine.

I had problems with streaming until I changed the WiFi channel that I was using. The original one conflicted with my neighbor. After that, MOST of my streaming problems vanished. Occasionally, a movie would pause for more buffering and I eventually ran an ethernet cable from the Apple TV to my Apple Extreme (to eliminate the Wifi). I have not had a single problem since then (except to repair the drywall after running the ethernet from one floor to another). :-)

Vista Sound problems with K8N Neo4 SLI Platinum

I wonder if anyone have gotten the sound to work under 32-Bit Vista RC1 (build 5600) on the K8N Neo4 Platinum SLI (MS-7100)? Installation of the, by MSI, provided XP driver (Creative_audio_32-64bit.zip) seam to work, and the device looks installed in Device Manager, but still no sound... Also, the icon for volume control in the icon trey detects that there is no sound card installed.
Anyone with a similar problem? Any solutions? Suggestions?
Thanks in advance!
Br
Daniel

Thanks!
I did try one of these drivers before without success. Now when I tried the old driver from nov 2005 it worked!
Drivers are found here:
(http://se.europe.creative.com/support/downloads/download.asp?MainCategory=1&nRegionFK=&nCountryFK=&nLanguageFK=&sOSName=Windows+Vista+32-bit&region=3&Product_Name=Live%21+24-bit&Product_ID=10315&modelnumber=&driverlang=1033&OS=26&drivertype=1&x=17&y=9)

S750 muffled sound front/center channel.

Hi there,
Roughly 6 months ago I purchased a set of the Creative S750 speakers. Upon reading the various horror stories, precautions were taken to ensure longevity. The speakers have also never exceeded half volume.
It looks like this still hasn't put off the inevitable. Recently the front and center channels have become muffled, upon inspecting further I was taken to the conclusion it was most likely the sound card. However, after removing the X-FI and activating the onboard audio it seems the issue still remains. The front channels sound bassy with no tweeters.
Notably, headphones that are plugged into the control pod sound fine, which would point to the preamp and main amps being ok.
The speakers are only a few months old, and they have most certainly never been abused. What could be the issue that is causing the muffling of the front speakers?
Nevermind, I found out exactly what this is, I'll leave this post for anyone else that has encountered this issue.
On further inspection of the faulty speakers, it turns out that the crossover circuit inside the speakers is the issue. The circuit itself would seem to be damaged. This could mean two things:
-This is not actually a brand new set of speakers, and they were damaged by the previous owner.
-The build quality of the speakers by the manufacturer is exceptionally poor.
-Also I observed that the internal shielding underneath the woofer is missing in 3 of the speakers which also goes to prove that they are a recon set.
I would normally expect neither of the above to be true after spending 360 on a BRAND NEW set of computer speakers and getting a refurbished set instead.
I hope this post will help anyone else experiencing this problem.
Message Edited by Thorn on 08-01-2009 07:32 AM

Hi there, I've had no problems with my sound system for 4 years until today. I hope someone can help. I have Creative X-Fi Extreme Gamer soundcard and S750 7.1 Giga Works. Years of great sound. Today I have no sound from my sub and muffled and low volume for the center front speaker.
All other speakers work perfectly. I switched the green an orange cables from the sound card and the sub with exactly the same results. I think this means the cables are okay. How do I tell if I got a defective sound card or sub? I suspect that either the amp or sub is defecti've but don't know for sure. If that is the case is it worth repairing or should I get another sound system? I can't seem to find the S750 for sale on Creative's website. Any advice will be greatly appreciated. Sincerely, tangone

K8n Neo4 Onobard sound --- Center channel is output on stereo sources

Similar Messages

Maybe you are looking for