K8N Neo4 Platinum Audio Problem

I'm having a problem with getting surround sound to work at all on this system. There are a number of problems.
Here is my main problem I'm currently dealing with. At one point I was able to have my surround speakers work on this PC. It's a standard setup, 2 front speakers, 2 rear speakers, and a single subwoofer. The color coding on the back of the PC indicates green for front, black for rear. That's fine and dandy, however only the black rear output seems to work.
If I plug the green into the green, nothing comes out the front speakers. If I plug the green into the black, sound will come out of the front speakers, but off the rear channel. I guess basically my problem is that my onboard sound will not put sound out of the front output as well as the rear.
I've tried installing sound cards, but the system basically rejects them. It won't even detect any sound cards I install. Windows will give me critical errors if I install drivers for any sort of third party soundcard.
It's as if this system REALLY doesn't want me to get my surround sound. Any ideas? I have all the newest drivers for my board, bios, etc. Thanks.

I'm glad you followed my advice...
Quote from: blazing storm on 06-December-05, 07:21:11
Try taking out the card, uninstalling the original onboard sound drivers, disable the onboard sound, plug the card back in. Boot up, and now hopefully it will work?
Great news that you're sorted!

Similar Messages

K8N Neo Platinum Audio Problem

My motherboards is connected to my home audio receiver via optical audio cable, and only sends the front left and right channels when using the ac97 codec. How do I set the spdif connection to send all signals in a 5.1 surround system.
Also to note there is nothing wrong with the connection because videos using the ac3 codec use full dolby digital and all signals work.
Also the other channels work fine using ac97 when I attach speakers to the rear speaker analog port on the motherboard, so that channel exists.
Please help, much appreciated.

I didn't even know there was a way to turn off decoding to get a passthrough. I've found that there is a lack of options that make a difference when I need them. I don't think it's necessarily a driver problem, because I can watch movies just fine off my hard drive in 5.1 providing they support the ac3 filter. I emailed msi and they said:
"You will need to install an AC3 Decoder in order to process and SPDIF output
to the receiver."
Problem is that I couldn't find an interactive decoder that would process multichannel output in a game. I emailed realtek as well to get their take on it, and they said:
"I'm sorry !!
The AC'97 Audio codec didn't support AC-3 Encoder for SPDIF-Out . You can try to play sound with PowerDVD or WinDVD"
So I have no idea what to do. It's starting to look to me that we're getting ripped off here. My problem is that I don't own any speaker systems other than my surround sound, which I cannot connect through analog, so I guess I'm gonna be deprived or digital surround in my games. Unless I buy an audigy 2 zs platinum which costs a fortune, and that might not even support multichannel spdif output.
If anyone finds a way around this, I'm sure it would help me and a lot of users.

K8N SLI Platinum audio problem

I have some problems with on-board audio, I can't find any solution on this Forum:
1. I hear loud noise from my speakers MT 323 5.1 after booting in Windows, same speakers connected to my second PC (Abit NF7S +Soundstorm) are noiseless. If I use headphones connected to MB AUD1 from case front panel, there is no such noise. So this is not speakers fault.
2. Channel separation is almost OK, but I hear right rear channel in central speaker during test from Speaker Settings panel.
Overall quality of sound is very good, only above problems
This situation not depends on SB Live! 24 bit drivers - 5.12.1.353 and ...356 - same problem. Of course my PSU has -5V rail.
Maybe somebody had such kind of problem?

Thanks Richard for your reply,
I had done what you had suggested, with software volume level controls set from 100% to 0% there is no difference in noise level, with speakers controls I'm reducing noise level but it is still in background. If I am in SuSE Linux mode I don't hear noise with 100% volume level (both software and hardware controls).
regards
Bogdan (Body_55)

MSI K8N Neo4-F audio problem

I have problem with connecting dynamic microphone to integrated audio device on the motherboard.
When i connect microphone i hear very low voice in speakers, but all volume settings in mixer are on top level.
Maybe integrated audio device don't support dynamic mic or it's problem with current instanse of motheboard?
Help me plz

Hello !!
Try another Microphone or another audio input source to check if your problem is caused by your mic. You could use a walkman discman to check it, if you have the right connection cables.
Good Luck
Greetz MurdoK

K8N Neo4 Platinum - Audio In not working?

I've plugged in 3 cd players, and a ton of other things, and made sure that the volume is up on my pc and i can't seem to get any of the audio in to come through
Any idea how to get it to work?

neohemp ,
That is great news! Glad to hear you are all set.
You might want to also download the latest Realtek AC97 Drivers or the nVidia Audio Drivers
If you had listed all your specs we could have taken a look at your comp and offer other options too.
Richard

K8N Neo4 Platinum & Vbat problems

Hi everybody, sorry for my bad italian english!
In our mobo newsgroup (it.comp.hardware.mainboard) we found several users having this strange problem:
within a short time (may be some weeks or a few months) the CMOS battery of the mobo slowly goes down with volts till it goes under 1.4V and on boot you get a "CMOS Checksum error - loading defaults". Even if you re-enter the bios and put everything back, on next reboot it's the same.
We only found some affinities within the group of unluckies in bios revision 1.9. Even changing the battery seems not to resolve the problem as the few who have tried still notice the volts slowly going down. Someone is trying to change both battery and put back an older bios version but it's still early to state if it works...
Does anyone know the problem?
Ciao!
Baio

Quote from: JeanGuy on 15-October-05, 05:50:42
Baio,
Go to this post by Supershanks and the follow the two URLs he has provided regarding BIOS problems & premature battery failures: https://forum-en.msi.com/index.php?topic=84608.0
Good luck,
Thanks a lot... unluckly it seems the only solution is RAM the motherboard directly with MSI... That's so bad...
Baio

K8N Neo4 Platinum, BATTERY PROBLEM

Hi
I really need some help!!
I have got a really big issue with the battery on my motherboard, It drains the battery and I donät think the recharge function is working.. I have changed it 3 TIMES!!! And it can´t be just me or that I have overclocked or that I have a 2 weak PSU.. my friend has the same type of motherboard and he doesn't overclock or has a weak PSU, and he has the same problem..
Any help would help..

https://forum-en.msi.com/index.php?PHPSESSID=5cdae7b8fac297499e37e95844a7372c&topic=84120.0

K8N Neo4 Platinum bios problem

ive a 3.7 64bit which reports right at post
but in windows its showing at 3.7+ 2.21ghz
cpu support say its a 2.4ghz chip
i updated bios to the latest 1
in bios i went into cell menu
in there its reporting at
current cpu clock 2211mhz
current ddr clock 201mhz
i can not change these settings
please can some 1 help me in setting my chip up so it reports right
thanks

The link you provided relates to a amd roadmap from 2004 interpreted by Anandtech. A roadmap is like a what-we-want-to-do list from a processor manufacturer it's not binding for amd and doesn't represent what was indeed released. Indeed amd did not release a 2,4ghz 512kb 3700+ for 939. The first 3700+ for 939 was 1mb san diego core (2,2ghz). The only 2400mhz 3700+ is socket 754 Clawhammer core, try yourself on amd page by entering your processor details: http://www.amdcompare.com/us-en/desktop/Default.aspx
You can prove me wrong by posting the opn printed on your cpu (looks like this ADA3700AEP5AR). But I'm sure there is no 2400mhz 3700+ for 939.

K8N NEO4 Platinum cold boot problem with 165 opteron?

I have this board and have a cold boot problem with my opteron. Is there anything I can do to fix this? Its starting to get very anooying.
K8N NEO4 Platinum
165 opty dual core
2X1GB Ballistix PC4000
160GB sata2
7800GTX
X-Fi platinum
600 watt seasonic PSU

Well I am running them at the rated speed of 250 and the rated timings of 3-4-4-10 on the rated 2.8 volts. Ballistix have been known to die quickly when you throw to many volts at them for some reason. I dont get the cold boot problem with the OCZ. Once I finally get it to boot with the Ballistix it works just fine but the next morning I play hell to get it to boot again. I dont even get the main screen to let me get into bios. It just stays black. I have done all kinds of stress testing and ran memtest with no problems. I am really at a loss here.

Problem replacing K8n Neo4 Platinum

Hello everybody, this is my first post here, I am a new member from Italy.
I have this problem:
I own a K8n Neo4 Platinum and when I changed the VGA from Nvidia 6600 GT to 8600 GTS the Mobo doesn't post anymore.. The usb diagnostig bracket says it's a memory problem but when I've put my memory banks on a different PC, they work just fine.
I think the problem was caused by the little space that I had between the VGA and the chipset cooler (Zalman passive);when I installed the VGA I damaged the chipset. Taking a closer look at it I noticed that 1 edge is damaged. I also substituted the Power suplly but the result is always the same.
So I decided to replace the mobo but I don't want to reinstall windows. Finding my same mobo is impossible here in Europe. I only found the K8n Neo4-F.
My question is the following :
-Does this Mobo use the same drivers that were installed on my HD? (latest driver downloaded from Nvidia version 6.86)
-Will I have problems with Windows ?

Massi186,
Moan Guide
Richard

K8N Neo4 platinum Problem!!!

Hi! I have got a problem with my K8N neo4 platinum mobo. The problem is from the beginning when i built the system i wanted to use my scssi disc as boot disc, bios find my disc and i started to install win xp i pushed F6 to install my scsi drivers then i went on with the xp install and i came to the first restart and the computer restarts and win xp logo the loadning screen appear, then my computer completly hangs up. I have tried diffrent ways of configuration but it doesnt work same problem all the time. Then i give up my scsi hd and put a ata100 ide disk in my computer to use a boot disk instead of my scsi disc, i start the installation of xp and i came to the first restart and then win xp logo loading screen appear, then the graphical installation moment begin a few seconds the my computer hangs up again and i had to restart it with reset button. But now i get a new more serious problem, just before the screen with the possibility to push del button to get into bios should shown up i get a 2 - 3 seconds tone from the mobo then the screen shown up with possibility to push del button to get into bios appear on my screen, then nothing happens, i cant get into bios, can not do anything. I have tried to clear cmos but nothing happens, i have even tried to pull off all the cabels to my hd:s off, still nothing happens, the only thing that is connected to my mobo is my dvd burner, my dvd rom, graphic card, wireless network card, sound card,scsi card but no cabels to the scsi hd. Pls help i need to get my computer run fast!!
My system is:
mobo K8N Neo4 Platinum
CPU: Athlon64 4000+
Graphic: Powercolor Ati radeon X850XT Platinum
Memory: 2X512mb corsair
hd ide: ibm 40gb
hd scsi: maxtor atlas 10k IV 36,4gb
scsi card: Tekram DC - 390U3W
Power: chiftec 360W 20pins
Dvd burner: Nec 3520
Dvd rom: Lite on 16x (dont remember model name)
Updated: I have fixed the problem with hanging at seconds after start up, i had to remove the battery and then pull it back. But still have the boot problems!!!

I checked the leds on the d-bracket and they dont show any problems. But i have to tell that when i pulled off the battery and then put it back into my mobo i dont know what happen, but now i have installed win xp on my scsi disc and it seems to work fine WHIIIIIIHAAAAAAA!!!!!

K8N Neo4 Platinum , problem durin istalling windwsXP

hi
ive just purchased MSI " K8N Neo4 Platinum " mother boared, with AMD64x2 3.8 GH , duel core.
the problem that after i install windows , and when its gonna strat for the first time, after the Windos XP logo apear, a blue error page apear, saying the windows has shutdown to prevent any damage
MACHINE_CHECK_EXCEPTION
so i hope u can help me with this problem,
with all my thanx

ops am sorry
ok mine is
K8N Neo4 Platinum
AMD Athlon 64 X2 3800+ - Dual-Core - Socket 939 CPU
512Mb Spectek PC-3200 / 400MHz
MSI ,GeForce 6200 with TurboCache, NX6200TC-TD128E
Western Digital 250GB Caviar SE SATA2 Hard Drive 7200 RPM 8MB
Sony cd writer
Genuis mouse
Aopen Keyboard
about the power supply not so sure, but it has 400W output.
OS, thats my problem trying to install WindownXP Pro,
after formating, and going smoothly through the setup
the windows XP logo apear, the error came..

Playing DVD-Audios with an MSI K8N Neo4 Platinum

I have a system built around an MSI K8N Neo4 Platinum motherboard. I'm using the motherboard's onboard sound, and I have it connected to a 5.1 speaker system. Using WinDVD 6 Platinum, I can play regular DVDs just fine, with awesome surround sound. However, when I try to play DVD-Audios, I only get stereo sound. Anyone have any suggestions?
A.J.

DVD video sound format AC3 5.1 and DVD-Audio sound format is not the same .
DVD-Audio disks has also a video AC3 5.1 track and stereo track , set yor sw player to use AC3 and see if it helps.
E.g a soundblaster Audigy ZE , or X-FI can render DVD-Audio , but not the onboard sound on Neo4.

Having problems with IEEE 1394 connection with MSI K8N Neo4 Platinum

Hi...
I am encountering problems connecting devices (portable hd etc) via firewire to my PC. My PC does detect the devices.
I am using the MSI K8N Neo4 Platinum board.
Check with Device Manager show that the VIA OHCI Compliant IEEE 1394 Host Controller is working properly.
IEEE 1394 controller has been enabled in Bios.
Need help to rectify this problem.
Thanks for the assistance...
Regards

Try this patch.

K8N Neo4 Platinum nForce4 Ultra and 4 GB SDRAM DDR 400 Problem

I have the K8N Neo4 Platinum nForce4 Ultra and 4 1GB sticks of Corsair ValueSelect DDR 400 (PC 3200), model VS1GB400C3, filling all four slots. The BIOS recognizes about 2.88 GB of total memory. The MSI manual states:
Quote
Due to the South Bridge resource deployment, the system density
will only be detected up to 3+GB (not full 4GB) when each
DIMM is installed with an 1GB memory module.
I'm not sure what this means. Does it mean that I'm "wasting" my SDRAM, that not all of it is used, or does it mean that all of it will be used and the BIOS just reports a smaller number?

Hi.
You seems not familiar with X86....
As you should know, Windows XP and most OS are 32 bits. That mean that every memory pointer is 32 bits, thus allowing to address 4Gb of memory.
BUT
In most OS, there is a difference between the kernel and the user. So, in most OS, the memory is divided in two 2Gb block (no matter how many Gb of Ram you really have!). The first one is for the OS, the 2nd for the user program.
So, If you have for example 3Gb of ram, in the best case, you have 1gb for system and 2Gb for user program.
To allow more Ram to fonction, PAE (Physical Address Extension) was made. Instead of 32, you got 36 bits for you pointers.
But as X86-32 CPUs can't handle more than 32 bits, a reserved area was made within 4Gb to allow Memory to be copied from the area the program want to read.
Exemple:
You got a server with 8Gb of ram. In windows, you only see 3.5+512Mb PAE.
If a program need to address memory in the 7-7.5 Range for example, the chipset copy the data from the 7-7.5 range to the 3.5-4 range in order to allow the CPU to get access: that's VERY slow.
So, in short: You can't have and don't need 4Gb of ram on 32bits OS.
(And there's even more place occupied by every card (AGP, PCI, PCI-e)....)
That's why XP64 is so interresting for programmers who needs lots of ram (Database....). When used with a chipset who know how to deal with lots of ram (I don't know if NForce4 can do it but I doubt it), you can load in memory a 4Gb Database.
But In all case, the bios should say 3.5Gb, not 2 and so on. You must have a problem with one of your stick. My guess is that they are all double sided and that you should slow down the memory to 333MHz.
(Or better: Send back 2x1Gb stick and get 2x512 SINGLE SIDED stick, unless you REALLY NEED 1.5Gb for your system !)

K8N Neo4 Platinum Audio Problem

Similar Messages

Maybe you are looking for