K8N Neo4 Platinum - fan replacement

I have a 2 month old K8N Ne04 Platinum edition (not SLI) motherboard. At first the system was dead quiet, however the NForce4 Ultra's stock fan has become increasingly loud over the last week, to the point where I can no longer hear myself think.
Can a new fan be ordered and attached to the existing heatsink, or does the whole unit need to be replaced? I have no idea what 3rd party part would be compatible, any pointers would be greatly appreciated. Thanks!

Quote from: Iceman81 on 07-July-05, 07:30:38
Hello there, I too had the same problem after 1 month of having the K8N Neo4 Platinum Motherboard. All was well and silent then all of a sudden the NORTHBRIDGE fan started clattering and getting very loud to which was very disturbing.
The only way around this is completely taking out the "MSI" provided NORTHRBIDGE fan by removing the motherboard from the case and pressing on the clips on back of the board that hold the fan and then popping in a new NORTHBRIDGE fan/cooler. I found a great replacement for the cheapie MSI provided fan in the "VANTEC CCB-A1C Ball VGA COOLER" which is all copper based and purchased from www.newegg.com for under 15 US dollars shipped.
Below is the picture of what the fan I recommend looks like...
I have since been using the "VANTEC ICEBERG COPPER COOLER" and the NForce4 chipset has been running very-very cool and was a perfect fit!
Take care, Ice!
Sorry to revive an old thread but looking at my problem and how often it was that question asked here, I want you to help clear things up...
Is this Cooler you are referring to, this one? The same model and everything?
http://articulo.mercadolibre.com.ar/MLA-23998289-cooler-chipset-o-video-vantec-iceberq-modding-_JM
Because if it is, I can buy it here knowing I will have that cooler replaced...
Another thing, Which is better? Titanium or copper? cos the titanium one is cheaper...
Thanxs a lot for helping me out pals...
EDIT: Sorry, pal... Didn't mean to offend anyone

Similar Messages

K8N Neo4 Platinum - Fan control missing?

Good evening.
I've recently assembled an Athlon 64 3000 (Venice) / Neo4 Platinum system, and unfortunatly I am not able to control the speed of any fan connected to the motherboard. Also disappointing is the fact that four fans are connected, but only three show in Speedfan.
My CPU cooler is Thermaltake's Venus 12, so it's not MB-controlable.
My Enermax 120mm fan connects using the usual 3-wire connection, and has an RPM knob integrated. It doesn't seem to respond to Speedfan no matter what the state of the knob is.
Last but not least is the noisy chipset fan, which shows but also doesn't respond to Speedfan.
There's also a 92mm Enermax fan which is connected the same way as the 120mm one, but doesn't show.
I've only found two BIOS settings that were said to be relevant - Cool'n'Quiet and CPU Fan Target. Both had no effect. I did no find a NB Fan Target setting that some people reported having.
CoreCenter seems uselss. It doesn't change anything regarding the chipset fan, and I didn't find any "Temp Alarm" setting for the chipset, that was also mentioned here at some time. Tried uninstalling it as well (probably with a restart, I don't remember), but it doesn't seem to have had an impact on the fan control issue.
So essentialy, what I've got are four fans connected, three of those showing, two of these that can theoretically be adjusted through software, one that's too damn noisy at more than 7500 RPM, and zero that I can actually through software.
And no, a Zalman Fanmate is not a solution after I've invested in this top-of-the-line MB. I expect to get what I've paid for.
Is there a solution to this problem, once and for all?

To get to the CoreCenter Temp alarms, you have to expand the right 'wing' (click little arrow); but this only sets temperature below which an alarm will sound: it has no effect on fan speed itself.
But indeed, nothing on CoreCenter seems to affect NB fan.
The manual itself only mentions that CPUFAN1 supports fan control.
[Will eventually apply myself hardware solution for nb fan, either single resistor, as described elsewhere on this board, or with rheostat; if i can find a store where to buy fanmate2, that would be better (shipping/handling from net order would cost more than the darn thing!).]
@Flow: my case fan, connected to SFAN1, does show in Speedfan, even without CoreCenter lauchned (I removed it from StarUp list).
(However, i still have the AMD PowerNow! Technology Service, ie GemServ, enabled and started)

Problem replacing K8n Neo4 Platinum

Hello everybody, this is my first post here, I am a new member from Italy.
I have this problem:
I own a K8n Neo4 Platinum and when I changed the VGA from Nvidia 6600 GT to 8600 GTS the Mobo doesn't post anymore.. The usb diagnostig bracket says it's a memory problem but when I've put my memory banks on a different PC, they work just fine.
I think the problem was caused by the little space that I had between the VGA and the chipset cooler (Zalman passive);when I installed the VGA I damaged the chipset. Taking a closer look at it I noticed that 1 edge is damaged. I also substituted the Power suplly but the result is always the same.
So I decided to replace the mobo but I don't want to reinstall windows. Finding my same mobo is impossible here in Europe. I only found the K8n Neo4-F.
My question is the following :
-Does this Mobo use the same drivers that were installed on my HD? (latest driver downloaded from Nvidia version 6.86)
-Will I have problems with Windows ?

Massi186,
Moan Guide
Richard

BSOD's on my x64 K8N Neo4 Platinum based PC, Any ideas what's wrong? Help!

Over the past few month I've been getting BSOD's. There is no real pattern to their occurence and it's not something which is constantly happening (It happened around 5 times in the past 2 months), but I've really grown to hate them. You see, after getting one what has happened in the past is that when I go to restart my pc after getting a BSOD, I find I need to re-install my whole OS! What happens is that after booting (which oddly enough doesn't work well after a BSOD, It freezes on the boot screen and I need to restart several times), a black screen appears telling me that certain files in the C:Windows\ direcotory are corrupt or missing.
So the real problem is that the BSOD's cause me to re-install my whole OS. One will happen, then it will be ok, I turn the system on, log into windows, then it might happen again, after which I'll need to re-install. The files that go missing are always different too, and when I run scan-disk (after plugging in my main drive into another computer) it finds corrupt files and deletes them.
At first I thought it was Azureus (p2p client) which was causing the problems because it seemed to happen when I was runing that. I stopped using it, and the BSOD's still occured...sometimes randomly when browsing...etc. I figured that since files got deleted and corrpupted, it must be a problem withthe Hard Drive....So I bought a new one, and I've still had the BSOD error (although files haven't been deleted yet).
So yeah, I really need to solve this problem as it is taking away from my productivity and causing me to re-install far too often. I will post the BSOD info as well as my system info below (and a screen shot):
Quote
MACHINE_CHECK_EXCEPTION
*** STOP: 0x0000009c (0x0000000000000004,0xFFFFF80000113BC0, 0x00000000B2000000, 0x0000000000070F0F)
I looked that up on the net, and it seems the first part seems to indicate, or at least COULD indicate overheating. I checked CPU and System temps and they seem acceptable.
I am running Windows XP x64 Edition with the following hardware (please note that all of the hardware drivers I'm using are written for x64, MSI is so good:)). I have had this PC before it started having these problems, it could be related to using x64 I guess, but the error doesn't show that does it?
Quote
AMD Athlon 64 3200+ 2.0 GHz Socket 939 (Venice Core) w/ stock heatsink/fan
MSI K8N Neo4 Platinum S-939 nForce4 Ultra
OCZ PC-3200 DDR400 Premier Series 1GB (2x512MB) Dual Channel Kit CAS 2.5
Ati Radeon x800xl 256MB gddr3, PCI-E
LG 17" L1720B LCD monitor 16ms, 1280x1024
Western Digital Caviar 120GB SATA
Western Digital Caviar SATA II (WD1600JS) 160GB 7200RPM 8MB Buffer
Western Digital Caviar SATA II (WD2500KS) 250GB 7200RPM 16MB Buffer
Pioneer DVR-109 DVD-RW
Pioneer DVR-110D DVD-RW
Antec Sonata II Mid tower ATX black power supply 450 Watt ( ATX12V 2.01 )
Creative I-Trigue 2.1 L3450 speakers
Sony 1.44MB Floppy Disk Drive
Microsoft multimedia keyboard and Microsoft optical mouse (PS/2)
My OS and drivers are fully updated. As for my BIOS I've been running the version I'm using now forquite some time and I believe it is version 1.5. Also in another bad turn of events, my northbridge fan seems to be on its way out of this world (this just happned so I don't think its related to the BSOD). I haven't been able to find a replacement, and since its not spinning very fast, and sometimes stops...It's causing the heatsink to get quite hot. I need to get a new one, and I can't find them anywhere...I wonder if thats covered under warranty... I looked into getting a different heatsink, but my Graphics card is so colse to this heatsink, that theres no room for a bigger one at all.
Do you think this problem is motherboard related, I cannot understand what the technical info the BSOD gives me means, can anybody understand it? I don't think its my HD's, or Ram, or CPU...could it be a motherboard problem? And if so, its under 1 year old, can I get an RMA?
Thanks for the help in advance.

At one time I had a weak 450w psu that had only 18a on the 12v rail. When I overclocked my cpu and gpu, I was getting bsod's every once in a while and couldnt figure it out until I read a similar post like yours on this forum. I decided to upgrade my psu and havent had that problem since.
Power supplies can be deceiving. I now have a 480w psu but its has 30a on the 12v rail. So what we need to know is the ratings of your psu (see my sig) just to see if your psu is the culprit. Just my 2 cents.

No Post/Black Screen - MSI K8N Neo4 Platinum

Hello,
Here is my problem, I bought MSI K8N Neo4 Platinum motherboard and got
- 3500+ cpu
- CORSAIR XMS 1GB memory
- PCI-E Leadtek 7800GT video card
- Aspire 520Watt PSU
I have put all of it together fine( I have put many systems for friends before) hooked all the power cables, case to mobo stuff, fans. Every time I turn it on fans go on, and lights go on but there is nothing on the screen as if no signal from video card to monitor, plus no error beeps which means cpu and memory is fine right. I have tried to just have memory, video card and nothing else hooked up, same result. I have tried another PSU, same result. Now to add to this, I had same problem with ABIT motherboard and another video card(same) which eliminates bad motherboard and bad video card, since both I have replaced except this time I got MSI mobo and not ABIT. I got same problem with all of it, nothing comes up, no post while fans spin when I turn it on etc... What could be the problem? memory? case? Any ideas?
Please help me as I spent a lot of $ and time on this and had no signal to monitor so far. Thanks.

As I said at this point I am trying to boot without any drives plugged in just to get a post and boot up but no go. So basically all my drives are unplugged and I cannot get it to work, I have tried different psu and same problem. I have tried another video card( I RMA this one and got another) it goes and snaps into PCI E slot all good, I have checked that many times. The only thing I can think of is memory at this point but this is brand new XM Corsiar memory and why wouldnt the motherboard beep ( i hoked speaker) if there was any error like that? I just dont get what is going on.
I have no idea what bios version I have as I have been unable to check it, unless you want me to check the chip version on chipset?

No Post - K8N Neo4 Platinum SLI - any help would be awesome

Ok here it goes. I recently bought a K8N neo4 SLI and set everything up, hit the power button, and nothing happened. So i figured it was DOA and i sent it back. got another one, hooked it up and nothing happened. Tested the PSU and power switch on a different machine and they work fine. But with the K8N i have nothing, no fans, no lights, nada. I am a relatively experienced computer builder and haven't had this one happen to me yet. I've read every troubleshooting guide on the MSI site and i think everyone in the forums but the dang thing still won't turn on. Here the specs:
K8N Neo4 Platinum SLI
Athlon 64 3200+ 90nm
512 x 2 Geil Ultra Platinum DDR 533
Seagate SATA HD 7200 RPM 160 GB
Chaintech 6600GT
Ultra X-connect 500W with the 24-pin adapter
Got a bunch of other junk too but thats all thats hooked up now. just going for the bare minumums so i could at least get some response. Please give me some ideas of what could be causing this are maybe something dumb i forgot. I know my power suppply blows but i've seen others get it going with that and since i only have barebones hooked to it, i'd think it would go. Thanks in advance.

I had an interesting thing happen to me yesterday, that sounds exactly like your problem.
I'm looking for ways to reduce my gpu temps, so I'm playing around with case fans, round wiring, etc... One of the cables I replaced ran to one of my PCI-E cards. aparently it had a short or something in it. I spent hours trying to get my computer to start up again, I was afraid I had fryed the board....no power, no fans, tried a different power supply, etc..... One wire, well two, because it's one of those that takes two molex plugs and turns them into a Pci-e plug.
What a pain....
Chack your wires, check for a short. If you're having the same issue with a second mobo chances are it's not board related. Could be you have the srews attaching it to your case to tight and have shorted it out there.
Hope this helps.
Good luck!

PSU Dead and MOBO K8N Neo4 Platinum SLI Too, what can i do???

Yerterday i was sleeping and suddenly the PSU (Rosewill RP550) Blow away, I Inmediatly check the PSU and guess what? Fried!!! Then i went to sleep again to check the other components in the mourning. The next Mourning i took my old PSU and put an 20 to 24 pin adapter, placed it in the mobo and doesn´t work, next i put a friend PSU with 24 pin connector and nothing, next i test 2 or 3 PSUs more and nothing. After all this tests i started thinking that the mobo was having electrical issues. I went to a friend house and tested the processor ( AMD 3000+ CBBID 0505) and the Memory (OCZ Rev2 1GB), they worked. I couldn´t test the Video Card (MSI 6600GT 128MB) because i dont have any other mobo to check it.
Its Important to tell you guys that when i try to plug the PSU power conector to the MOBO the Fans and network led start for 1 second, then turn off, i try to start the computer and nothing happend. All this with the four PSUs.
A friend of mine which is a computers Technician told me that took off the MOBO batery, CPU and Memory and put Aluminiun foil all over and around the mobo to eliminate any static on it. What do yo think about this??
Please if you have any suggestion, i´ll be happy.
BTW: Which are the procedures to RMA both componnets ? I bough the mobo and PSU and the others components on www.newegg.com on May 09 2005.
Thanks for all.

Got my Newegg RMA board back (K8N Neo4 Platinum SLI) today! I mailed it to them Friday, they got it Monday and a replacement back to me today. Excellent turnaround
The board looks like it was refurbished because the anti-static bag was a bit wrinkled and had pinholes all over one section where the board couldn't have caused it. Also, it had bios 3.0 on it! The rest of the stuff in the board looks new but it didn't come with the USB 2.0 bracket which the first board I got did. Live and learn.
I flashed it to 3.2 and all appears to be working. Not gonna try 3.3. I read somewhere that there may be a beta 3.5 bios out somewhere. Maybe I'll wait till that one goes final.
Haven't had any experience with MSI support as far as RMA's but if this replacement board craps out I'll try them next.

K8N Neo4 Platinum random lock-ups and BSOD

I built a new PC about 3 months ago and from day 1 it has always locked up / frozen at random intervals. Sometimes it also BSOD's with a Machine Check Exception. Seems to lock up / freeze more often when have multifple windows open eg. Multiple IE running but really is random. I have replaced the Mobo and Ram but keep having the same issues. Have tried a clean install but no luck either. Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
System is as follows:
MSI K8N Neo4 Platinum [Bios 1.D]
AMD Athlon 64 X2 3800+ DC [AMD Drivers]
2 x Kingston 1024Mb ram [Dual Channel]
Nvidia 6800 Ultra [Latest Drivers 91.31]
Thermaltake Purepower 460W PSU +3.3V 30A, +5V 30A +12V 15A
Western Digital 200G SATA II HDD [SATA Port 5 i think]
1 x LG DVD +-R/RW [IDE Master] IDE port closest to edge of Mobo
1 x LG CDR/RW [IDE Slave]
MS XP Home SP2

Quote from: davePC on 09-August-06, 09:06:44
Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
Seemed fine?
There isn't really be any difference between an IDE drive and a sata.
Except that the sata drive needs some drivers as your installing the os.
Check your ram timings in bios but likely it's your psu.
Which components are on which rail?
The ones that use the +12v are your cpu,cdrom,dvdrom and graphics card.
Try disconnecting both roms and see if it improves things?

Lan issues with the K8N NEO4 Platinum NF4U 939 Motherboard

New K8N NEO4 Platinum NF4U 939 Motherboard.
After three or four hours the connection started to get unstable. I am a high end gamer and any net slowdown I see and feel.
Using my "Ping Plotter" program i saw the issue. The first hop to my router was going from 0 to 47ms. On all of the other conputers on this network hop one stays at 0.
In looking at the over all ping to my game server I noted that when hop 0 went to 47 it messed up all of the other hops and made the connection to my game server unstable.
The odd thing is I bypassed the onboard nic's and installed a PCI nic and it did the same thing.
I got with MSI and they had ne updare the NVIDA drivers. This lowered the swing to 0-17. I removed the PCI lan and am now back with the onboard nic. I have replaced the DSL modem, cable and removed the dlink and the issue is still the same.
This is my first computer with XP and at this point I do not know if this is an XP issue or a driver issue.
In installing a pci nic some of the network control is still done on the motherboard so that does not rule out a motherboard/chipset driver issue.
I have set up a web site that shows screen shots of the ping plotter. Please take the time to look at them and tell me what you think.
http://webviper.com/LanIssues.htm
Thanks for your help.
Regards,
WebViper

Hello !!
Please give more information about your system specs.
But i would try the following:
Download the latest nforce and vga drivers from nvidia ( if you are using nv VGA card ? ). Google for "driver cleaner" and download it.
Restart system and press F8 to enter safe mode. Now uninstall all nvidia drivers(chipset & VGA), and run Driver Cleaner after it. Select the nvidia tabs and remove them....
Now reboot, when prompted to install new drivers cancel this process. And start nvidia chipset driver setup, install all drivers but do not install the IDE driver from nvidia, you will be prompted for this.In first attempt you should not install nvidia firewall. Restart and install VGA drivers. Now test again your network connection. I hope it helps....
Greetz

RMA'ed K8N Neo4 Platinum board, no sound on the new board's output

Hi Folks,
I just got back the replacement for the K8N Neo4 Platinum boad I sent in a month ago. The good news -- my mirrored RAID array came back up and my WinXP/SP2 setup looks fine. The bad news -- my front speaker output doesn't put out any sound. My Amplified 2.1 speaker set was plugged into my older machine and working fine, and I just swapped the speaker cable into the green output plug on my MB, and no sounds comes out. Sounds was working on the previous MB which I sent in for RMA, so the software on my HDD's should have been set correctly to generate sounds on the new MB.
First, any suggestions on how to get the sound outputs working? Second, any pointers on how to diagnose what's going on? Should I be seeing "Realtek '97" (or something like that) for the playback and recording devices, for instance?
Thanks in advance for the help!
Clark

Couple of things come to mind. Power on the system and head on' over to the bios. Ensure the audio onboard is actually turned on...or if the board they sent you had it disabled.
Check the Device manager for any "!" in yellow next to anything in the audio dept. (windows control panel/system/hardware...yadda yadda....) If the onboard audio is turned 'on' and windows is seeing it? You'll have a heading for AC '97 listed, and also under sound effects options in the control panel it should be listed. If it's listed as working 'ok'? I seem to remember a set of jumpers on the motherboard for audio output. In the manual it's listing as follows:
"If you don't want to connect the front audio header, pins 5&6, 9&10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise the line-out connector on the back panel will not function" That's out of my manual regarding JAUD1 connector. And I have the Neo4 K8N board.
Best of luck!
S-

New K8N NEO4 Platinum (non SLi) wont leave boot screen???

I just went out and purchased:
AMD Athlon 3000+
K8N NEO4 Platinum
Some standard case with a 450w power suply
On the +12v it says I have 18a
And Im using some things from my old PC:
(PCI) ATI Radeon 9200se (CrapTastic!)
Maxtor 40Gig (not Sata)
1x Samsung PC2700 DDR 512mb RAM
This is my first PC build and I ran into a couple of problems:
I have tried 3 different PS/2 keyboards(2 older and 1 newer) and none of them work. It shows the Platinum screen and then goes to a different screen that says "Keyboard error or not plugged in"
So I try my USB keyboard that I got about a year ago and the lights flash on the kb when I first start up but.....once I get to the Platinum screen the keyboard becomes unresponsive and I cant move off the Platinum Screen into BIOS or anything.
PLEASE HELP!

Well I went out and purchased a USB to PS/2 adapter and plugged it in with the USB keyboard that would light up but still not work and......................... STILL DID NOT WORK!
Im going on 2 weeks now with no Counter-Strike:Source and im goin nuts
Quote from: ck5134 on 07-September-05, 03:12:50
Grimster i agree totaly with jeanguy, you need around 25-30amps min on these boards, so try a mates psu.
Do I really need more than 18a with my system? How much money (ballpark) in US dollars do you think a adequate PSU for my rig would cost???
I am really thinking of just takeing it back and getting it replaced with the same mobo and see if that works.

K8N Neo4 Platinum/SLI

I am confused with regard to what is actually included with the K8N Neo4 Platinum/SLI board in the US. Unfortunately, MSI isn't very clear with their information.
Does this board include the following, or are they optional, & if optional how can I get them:
IEEE 1394 (Firewire) ports (1 external, 2 internal)
SPDIF Out
D-Bracket 2
SATA 5-6 ports
Anybody actually have this board installed & running yet, & would you buy this board if you were starting all over again? Were your experiences with this board good or bad? Any gotchas?
Thanks

Quote
Unfortunatly, the MSI-websites (american, european, taiwanese) all have slightly different specs listed, but none exactly covered what my package included.
I've read numerous posts about MSI motherboards & video cards not meeting the manufacturer's claimed specifications. This deeply troubles me, & makes me wonder if I should buy MSI products at all.
Quote
f you buy 2 6600GT's now, you're stuck on the performance of about a single 6800GT, less in some cases.
If you buy a 6800GT now, you get the same bang, but have the option to add anotherone later to up your rig!
Exactly my point! I just can't see paying extra money on a high-end, bleeding-edge SLI motherboard, then populating it with 2 mid-level graphics cards. I suppose that seems logical to some people, but not me. I've also read in the reviews that the attachment of the heatsink/fan on the 6600GT is not physically secure, & many of the heatsinks aren't properly attached to, or making full contact with, the GPU on retail versions of the cards!
Of course, SLI is still very much a technology that has yet to prove its promise. Very few games support it, & teething pains abound. We're still in the verion 1.0 of SLI motherboards, which is kind of scary, & all of the current crop of SLI motherboards seem to have their "issues." nVIDIA is lagging behind in releasing updated video card drivers. Maybe SLI isn't quite "ready for primetime" yet.
Quote
An Ultra would be a waste of money. The difference is not worth the extra dough for it, and a brand GT can
be clocked to Ultra-levels as well.
Some people would not want to spend the extra $ on an Ultra, but others might feel that it is well worth the cost. Sure, you can overclock a GT to gain a bit of extra performance, but what levels of performance can you gain by overclocking the Ultra? I don't know the answer to this. I still have a lot of research to conduct concerning the nVIDIA 6800GT & Ultras, & the "real world" viability of SLI.

K8N Neo4 Platinum as HTPC mobo questions

I've been looking at building a Home Theater PC (HTPC) for a little while now and have been investigating various parts, including possible motherboards. The MSI K8N Neo4 Platinum is a key canidate and I was wondering if I could get some advice from people who actually use the board as to whether it would be suitable. Here is the basic run down of what I need:
1) I have read that there are potential issues with the AMD 90nm cores. It seems a lot of people in the forum are running them though. Has the problem been cleared up with the latest BIOS? (I am looking at using at least a 3500+ Venice core, but might try to go a little higher).
2) The board has a cooling fan on it, How loud is it? (The goal is to try and make the system as silent as possible without going over budget)
3) Front side Firewire connector - it seems like its located between two PCI slots. Has this posed a problem?
4) The PCI slot "reserved" as a comm slot - is it usable for other PCI devices? (One reason this board is on the short list is that it has 4 PCI slots. I plan on putting in at least 3 tuner cards, possibly 4 or using the 4th for a sound card or some other device. Thus, having this slot available as a general purpose PCI is important. Some retailers claim it is 'reserved' others don't.)
Any other recommendations would also be appreciated. Especially as concerns silencing and processor choice.
-Watson

Quote from: watson on 08-March-06, 00:54:50
1) I have read that there are potential issues with the AMD 90nm cores. It seems a lot of people in the forum are running them though. Has the problem been cleared up with the latest BIOS? (I am looking at using at least a 3500+ Venice core, but might try to go a little higher).
There were, make sure u get a E4 revision or higher. 99,9% of CPU's shipped today will have that.
Quote from: watson on 08-March-06, 00:54:50
2) The board has a cooling fan on it, How loud is it? (The goal is to try and make the system as silent as possible without going over budget)
Very, I have the same fan. I run it at 5v, than it's OK, u can get an adapter in most PC shops. Getting a passive haetsink is also a possibility, but that will void your warrenty.
Quote from: watson on 08-March-06, 00:54:50
3) Front side Firewire connector - it seems like its located between two PCI slots. Has this posed a problem?
Dunno, Don't see why, make sure u get a HTPC with a front bracket with a FW port.
Quote from: watson on 08-March-06, 00:54:50
4) The PCI slot "reserved" as a comm slot - is it usable for other PCI devices? (One reason this board is on the short list is that it has 4 PCI slots. I plan on putting in at least 3 tuner cards, possibly 4 or using the 4th for a sound card or some other device. Thus, having this slot available as a general purpose PCI is important. Some retailers claim it is 'reserved' others don't.)
Hmm, my gues is that that would be a problem.
Quote from: watson on 08-March-06, 00:54:50
Any other recommendations would also be appreciated. Especially as concerns silencing and processor choice.
See if this will fit in ur HTPC (the 80mil one)
http://www.coolermaster-europe.com/index.php?LT=english&Language_s=2&url_place=product&p_serial=RL-MUA-E8U1%20/%20EBU1&other_title=+RL-MUA-E8U1%20%2F%20EBU1+AQUAGATE%20Mini%20R80%20%2F%20R120
Underclocking and undervolting will also help keeping the CPU cool = less need for noisy fans.
Be weary of components causing heat. Samsung HDD's are the coolest, use as many as the onboard stuff as possible, etc..
Stick to 1 casefan and put it on the NB-FAN, so Corecenter or Speedfan can manage the fan speed. Recomended brands are Papst, Panaflo and Vantec Stealth.
4GB limit is due to having a 32bit OS. With 32bits u can only adress a max of 3GB. It might work using XP 64-bit, but I don't see why a anyone would need it.

K8N Neo4 Platinum Ultra nForce4 no post.

Took the cpu off and cleaned it, upgraded the video card started the computer and no post. Led's 1,3,4, green 2 red. Took cpu out and checked it no bent pins, checked all connections. Sometimes when it boots it will have 4 green led's but no video. Tried another vid card same thing. Tried booting and holding the insert, cont+home, F1, delete keys. Get power to the fans and hear the HDD sometimes.
Specs.
MSI K8N Neo4 Platinum Ultra nForce4 bios v1.6
Athlon 64 3700+ San Diego Core
Geil value ram
1-36GB Raptor
, M45 Powercolor Radeon X800 GT PCI-EX 256MB DDR3 R480 Core
XP.Pro.W/SP.2
X-Connect 500W ATX PSU
+5V +3.3V +12V -12V -5 +5VSB
30A 28A 34A .8 .3 2
Edit: Have cleared the cmos many times. If I boot holding the insert key down for a while I get 1,3,4, leds red 2 green, if I then push F1 they all turn green but still no vid.

No posts to your post either LOL
Anyway - could be fans causing it - I had my Neo not booting until I disconnected a case fan from the mobo fan header output.
Try with just leaving the cpu fan (could also be this one of course) .

K8N NEO4 Platinum (MS-7125) PINOUTS

I really do apologize to everyone if im sounding a little tiring on this matter, but im near the end of this journey and im just checking the last and final details before final assembly....
I was just going thru the K8N NEO4 Platinum manual and i started wondering what exactly do they mean when they label a pin "RES" or "Reserved" what does this mean? whats the difference between "RES: RESERVED" and "NC: NOT CONNECTED"?
the ATX1 main connector for the board sports the "NC" label on pin 12 while on my PSU that pin has a +3.3V line, and pin 20 has the "Res" label and again in my PSU that pin carries the -5V line, the manual has no notes on that,
so is it safe to assume that nothing will happen if i connect my PSU to the board?
I have a KMEPC PH Series 500W dual fan PSU, ATX 1.3 compliant and has both the 12V 4pin connector and the 20+4 main ATX power connector, it was the best bang for the buck down here and has 25 amps in the 12V rail which should be more than enough for my system.

RES/ RESERVED means that the pins are not in use and reserved for future needs.
NC/ NOT CONNECTED means that the pins have no connection, can be used in the future as needed.
The -5 volt line is a relic of the old ISA days, most newer MB and many P/S no longer use this.
The P/S connector has a few more 3.3v pins, with newer MB the 3.3v is not so much needed as the 12v rail is being used for more work, in the old days (really not all that long ago) like the KT133 era the 3.3v was used Extensively.
You are safe to connect your P/S up to your MB, Happy computing

K8N Neo4 Platinum - fan replacement

Similar Messages

Maybe you are looking for