K8N Neo4 Platinum Freezes playing ripped movie from hard drive???

System freeze's up usually after a half hour to 50 min of playing a ripped movie. Sometimes after freezing up reboots and stops at the raid boot. If you reset usually comes up missing the NTRL... or so. So I power down sys. wait 30 secs. to min. reboots fine. This also will happen if computer sits idol. Power Saver feature is turned off in Display setup, also no screen saver. Not sure if there was any of these features in the Bio's
AMD64 3000
Bio's 1.5v
Arrow 650 max (+3.3v - 45A) (+5v - 42A) (+12v - 22A) (-5v - .5A) (-12 - .8A) (+5vsb - 3A)
Kingston (KVR400X64C3AK2/1G) 2 - 512MB Dual Channel 2.6v set to. not sure what to set anything else to?
PowerColor X850 Pro 256MB
Maxtor PATA 40 Gig
Maxtor PATA 120 Gig
extra but pulled temp.
PATA Raid 5 Card Promise 4000 Lite w/4 - 250Gig Western Digital
Pulled out to see if it was a prob but made no difference.
The intention for this computer is as a Movie Server of all my DVD's to eliminate the load time, and to prevent damaging disc's by touching, possible drops. currently have a 300DVD changer and a 400 dvd changer expected any day. Preferr to have instant load instead of waiting for discs to load.
Future intentions are to add 500 gig drives when prices come down to a reasonable price.
Is this a nvidia driver prob? Any help appriciated
Thanks Matt

Quote from: iceman0304 on 22-July-05, 19:17:13
CPU-Z
Freq- 200.9
FSB Dram- CPU/5
CAS# Lat- 2.5 clocks
RAS# to CAS# Delay- 3 clocks
RAS# Precharge- 3 clocks
Cycle Time (tras)- 8 clocks
Bank Cycle Time (Trc)- 7 clocks
Dram Idle Timer- 256 clocks
These are the timings of the memory tab, aren't it??
If they are in BIOS put the CAS value to 3. because if go to the SPD tab you will see that the CAS value at 200Mhz is 3, I think....
Did you give more volts to the memory, as I sugested in my previous post??
Be well....

Similar Messages

PLAY MOVIES FROM HARD DRIVE ON AIRPORT EXTREME

Will I be able to view movies from my USB hard drive hoocked up on my Airport Extreme on my iPad.
Regards

I have a 20" Intel OS 10.5.6,DSL modem,Airport Extreme Base,LaCie 500GB USB HD. I made 4 partitions 3 mac HFS, 1FAT32 since I used boot camp to install my old Win XP. With the HD connected to the Mac, all is well and even backed up 1056 using Superduper.
With the HD connected to the AEBs,airport utility-manual-disks (in the disks window the HD and all partitions are there)-file sharing- secured shared disks with APE PW. That said, still nothing on the desktop.

.m4v files won't play in QuickTime from hard drive

hi, downloaded tv series from iTunes (.m4v files). When I go to iTunes Media and click on one of the shows it opens QuickTime and a grey and white checkerboard screen appears and nothing else. Can stream the shows direct from iTunes but that adds to download quota and want to play the downloaded version on my hard drive using Apple TV. Thanks if you can help. Downloaded Perian and didn't help

The correct way to stream purchased content from iTunes to the AppleTV is using Home Sharing NOT Airplay mirroring which I think you are attempting here.
Enable Home Sharing in iTunes and on AppleTV (under Computers).
Provided your iTunes is running on the same LAN as AppleTV you can go to Computers and selecting TV Shows/Movies etc from there plays across the LAN not the internet.
It is the main Movies/TV Shows/Music icons that play previously downloaded content from the internet/cloud - Computers icon pulls locally stored iTunes content across the LAN not the internet.
AC

How to stream movies from hard drive to apple tv

I have an external hard drive connected to my Airport Extreme, which works for my Time Capsule and saving files wirelessly; however, I do not know how to access the movies I have on it via my Apple TV or iPhones without having my laptop open using HomeSharing. Is there a way to access the files directly from the network hard drive?

Understanding Home Sharing
Setting up Home Sharing for Apple TV (2nd & 3rd generation)
iOS- Setting up Home Sharing on your device

How do I delete iTunes movie from hard drive

It doesn't show up in Itunes but it's still in my Movies subdirectory of iTunes (taking up 1.6G). When I try to delete it from the folder, it says it's write protected or in use. It's not in use. HELP!

Do you mean all data BUT the operating system?
If so, boot the iMac with the install DVD in the optical drive while holding the C key. Select the language and then continue. Select from Utilities, Disk Utility and then Erase the hard drive. Then choose Install Mac OS X so you reinstall only the operating system. You can then use the apple at the left side of the menu bar and Software Update to date to 10.6.8.

Deleting Movies from Hard Drive

I wish to make some space on my hard drive and have all movies backed up on a seperate 'Lacie' hard drive via 'Time machine'. I have a lot of projects on iMovie HD which I wish to delete from the Hard Drive. Problem is, I can't. Every time I try and dump something in the trash can it just bounces back again. I'm either being very thick, it may be an age thing, or something is wrong with the kit, any suggestions will be much appreciated.

I've had that happen too. Try this instead. I think I remember doing this. Click on the item you want to delete. Go to the menu and under File, click on "Move to Trash".

K8N NEO4 PLATINUM Freeze Lockups

I recently upgraded from a Athlon 3000+ to my current 4000+. I'm having issues running games that used to run perfectly fine. The games usually freeze shortly after starting. The problems seem to be with more graphically intense games, like Company of Heroes. All of my drivers are up to date, but I cant seems to get this issue to go away. Everything was super stable with the 3000+, not a crash in over a year.

Quote from: bullsfn on 06-March-07, 05:27:34
timings are 3-4-4-8 but how this translates to the Manual settings is greek to me. I tried to read the manual but it didn't help much there are way more than 4 settings. Some help with the memory settings would be appreciated.
3=cas latency
4=ras to cas (trcd)
4=ras precharge (trp)
8=tras
Rest should be left on auto I think, but someone here will correct me if I am wrong about that. Volts for Dimms as stated by DaveR above. Don't worry about flashing red at 2.75 v. as he says.

K8N Neo4 Platinum not detecting hard drive

Hi,
what may cause a K8N Neo4 Platinum to not detect an IDE hard drive? no matter what i try the mobo never sees the hard drive.

welcome to the forum
1) What Hard drive - size & make
2) How connected - By itself as Master or slave.
3) What other ide devices.
it's a lot easier when u post some specs & we can quit the guessing games.

K8N Neo4 Platinum, how to move MBR to sata (make it drive #1)?

I am not sure I am phrasing the question correctly, so bear with me. I have a K8N Neo4 platinum with the SiI3114 controller and sata ports 4-8 (I believe its what they are calling PCB 1.x) with bios v1.D. I moved the board to another box and installed winXP on it. I was running it with IDE hard drives. Everything was working great but the OS was running really slow so I bought a SATA 300 mb/s drive and pluged it into SATA1 (I read about using ports 3 and 4 for raid but I do not want to use the NVraid at all, it is disabled). Then I proceeded to reinstall win XP. In the setup, I deleted the original C partiton and created one on the sata drive and rebooted so that there would be no "C" drive confusion by the winxp setup (have had that problem before and this keeps it from happening). Went through the setup and the sata was correctly reported as "C". Told windows to install itself there but it told me that it needed to write to MBR on the old c drive but that, since I had deleted the partiton, it couldn't and had to format it. So I knew that something was wrong.
So I rebooted and disabled the ide bus that contained the old IDE drive and just left the CD ide bus enabled. WinXP installed fine with no complaints. Then it rebooted and I re-enabled the ide bus in the bios. It wouldn't boot into the partiton I just installed winxp on! To get it to boot, I had to use F11 (the bios boot menu) and select the sata drive. Went through the whole setup winXP thing and rebooted. Same problem, it wouldn't boot the sata drive. :(
As long as that ide bus with the old ide drive is enabled, it won't boot the sata drive! I have rearranged the boot order on the bios every way possible. I opened up the box and moved that ide chain with the old ide drive to the ide2 port and put the dvd drive on ide1. I made the old drive slave and the prior slave master. That didn't fix it either. How do I tell this motherboard that the 1st drive is the sata drive? How do I tell it the MBR should be there not on the old ide drive? How do I fix this? Thanks!

Thank you for your replies! Hans, thank you I will give it a go again doing full formats all the way. I usually use the full format when installing winXP but I did things in a different order than you instructed so I will definately try it.
Aicjofs, thank you, There are 3 hard drives in this system currently. There is the ide hard drive that used to be the "c" drive (a western digital 160gb ata133 7200rpm 8mb cache) and a second ide hard drive that is an extended partition with 1 logical drive with data on it (western digital 300gb ata133 7200rpm 8mb cache). Then there is a sata hard drive in sata1 port with 2 partitions one primary and one extended. The extended partion does have data on it as I moved stuff there after I got winXP up the 2nd time (western digital 250gb sata II 7200rpm 16mg cache). Right now, I have the ide drive with data on it as ide2 master and the old "c" drive as ide2 slave and it is unformatted and contains no partion information (I deleted the partition after I installed the SATA drive and installed winXP). XP won't boot. What happens is that, if I take the winxp cd out, it gives me a "no system" error. If I leave the WinXP cd in it boots that disk. However, if I use "f11" and choose to boot the sata drive, winxp comes up just fine. If I disable the ide bus with the two ide hard drives, it boots winxp just fine.
Edit: bios is v1.D. It feels like this mobo is telling windows setup that the master ide drive is the first disk and to ignore everything else. It feels like if I can just tell the mobo that the sata drive is the first disk then everything will work . It is late night where I am now, and I've been fighting with this since the afternoon so I might have to goto sleep but I will be back at it tomorrow and will go though what Hans instructed. If anyone has any otehr ideas, I'd really appreciate that as well.

K8N NEO4 Platinum the boat anchor from hell!

I just asembled the following:
MSI-7100-030 K8N NEO4 PlatinUm SLI
Geoforce 6800 PCIE
2 Gig DDR400
2x200Gb WD SATAII drive
2x80GB Seagfate SATA drives
2x80GB Wd IDE drives
I get terrible performance.
Takes One hour to copy a 6Gig file to another drive or folder.
Multi tasking is almos nonexixstant.
I got this board as a white box [oem].
No software or manuals.
So I Dl'd the system & raid drivers from MSI.
As i did not run well I then got updated drivers form Nvidia & from Silicone Image.
No better.
I ran a benchmark program (Passmark Perfomance Test) and was very unhappy.
Has anyone had similiar issues?
Would anyone download a copy of this software from:
http://www.passmark.com/download/pt_download.htm.
Please run the "Run All test Sequentially" icon [second from end of tolbar].
Save & email me the results at [email protected]
Should take no more than 5 minutes.
Please specify your system build for comparison.
Thanks & happy newyear!

selkov,
you don't appear to have a CPU or PSU in your system, can you tell us what they are please?

Playing DVD-Audios with an MSI K8N Neo4 Platinum

I have a system built around an MSI K8N Neo4 Platinum motherboard. I'm using the motherboard's onboard sound, and I have it connected to a 5.1 speaker system. Using WinDVD 6 Platinum, I can play regular DVDs just fine, with awesome surround sound. However, when I try to play DVD-Audios, I only get stereo sound. Anyone have any suggestions?
A.J.

DVD video sound format AC3 5.1 and DVD-Audio sound format is not the same .
DVD-Audio disks has also a video AC3 5.1 track and stereo track , set yor sw player to use AC3 and see if it helps.
E.g a soundblaster Audigy ZE , or X-FI can render DVD-Audio , but not the onboard sound on Neo4.

K8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

I've hit a brick wall.
my sound card does not work and i have the amd 64bit 3500+ with msi-7125 version X.1.
Can anyone help as my next option is to go back to crapy yoyo tech who recommended and speced the solution knowing that there is an issue with the diamond model of the motherboard as you need -5 v for sound to work :-( nice!
I've tried triders from nvidia (forceware stuff) and got latest amd driver + msi live update.
Have not connected the front panel speaker connections either.
Thanks in advance peeps.

here's the article for n e 1 that needs it:
https://forum-en.msi.com/index.php?threadid=69730
summary:
install amd cpu driver from amd site (extract the zip and do it that way through device manager)
Also from AMD the core cpu tool for cool n quite
install msi's live update and most drivers + tools you like EXCEPT the audio ones
Install the nvidia 6.14 audi drivers manually and the audio util to configure speakers
See the following article:
https://forum-en.msi.com/index.php?topic=73804.msg519824#msg519824 for all the links
Happy building :-) - note this is for the msi k8n neo4 platinum (NOT SLI) but has pci-e

MOVED: k8n neo4 platinum with tagan 480 PSU NO SOUND from onboard realtek 850 :-( Help

This topic has been moved to AMD64 nVidia Based board. Please pay attention to what area you post in if you want help.
https://forum-en.msi.com/index.php?topic=73850.0

here's the article for n e 1 that needs it:
https://forum-en.msi.com/index.php?threadid=69730
summary:
install amd cpu driver from amd site (extract the zip and do it that way through device manager)
Also from AMD the core cpu tool for cool n quite
install msi's live update and most drivers + tools you like EXCEPT the audio ones
Install the nvidia 6.14 audi drivers manually and the audio util to configure speakers
See the following article:
https://forum-en.msi.com/index.php?topic=73804.msg519824#msg519824 for all the links
Happy building :-) - note this is for the msi k8n neo4 platinum (NOT SLI) but has pci-e

K8N Neo4 Platinum random lock-ups and BSOD

I built a new PC about 3 months ago and from day 1 it has always locked up / frozen at random intervals. Sometimes it also BSOD's with a Machine Check Exception. Seems to lock up / freeze more often when have multifple windows open eg. Multiple IE running but really is random. I have replaced the Mobo and Ram but keep having the same issues. Have tried a clean install but no luck either. Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
System is as follows:
MSI K8N Neo4 Platinum [Bios 1.D]
AMD Athlon 64 X2 3800+ DC [AMD Drivers]
2 x Kingston 1024Mb ram [Dual Channel]
Nvidia 6800 Ultra [Latest Drivers 91.31]
Thermaltake Purepower 460W PSU +3.3V 30A, +5V 30A +12V 15A
Western Digital 200G SATA II HDD [SATA Port 5 i think]
1 x LG DVD +-R/RW [IDE Master] IDE port closest to edge of Mobo
1 x LG CDR/RW [IDE Slave]
MS XP Home SP2

Quote from: davePC on 09-August-06, 09:06:44
Did a clean install on an old IDE HDD and seemed fine but it did not have all of the software that I run on the SATA drive. Thinking the SATA drive may be the issue? Please Help!!!
Seemed fine?
There isn't really be any difference between an IDE drive and a sata.
Except that the sata drive needs some drivers as your installing the os.
Check your ram timings in bios but likely it's your psu.
Which components are on which rail?
The ones that use the +12v are your cpu,cdrom,dvdrom and graphics card.
Try disconnecting both roms and see if it improves things?

BSOD's on my x64 K8N Neo4 Platinum based PC, Any ideas what's wrong? Help!

Over the past few month I've been getting BSOD's. There is no real pattern to their occurence and it's not something which is constantly happening (It happened around 5 times in the past 2 months), but I've really grown to hate them. You see, after getting one what has happened in the past is that when I go to restart my pc after getting a BSOD, I find I need to re-install my whole OS! What happens is that after booting (which oddly enough doesn't work well after a BSOD, It freezes on the boot screen and I need to restart several times), a black screen appears telling me that certain files in the C:Windows\ direcotory are corrupt or missing.
So the real problem is that the BSOD's cause me to re-install my whole OS. One will happen, then it will be ok, I turn the system on, log into windows, then it might happen again, after which I'll need to re-install. The files that go missing are always different too, and when I run scan-disk (after plugging in my main drive into another computer) it finds corrupt files and deletes them.
At first I thought it was Azureus (p2p client) which was causing the problems because it seemed to happen when I was runing that. I stopped using it, and the BSOD's still occured...sometimes randomly when browsing...etc. I figured that since files got deleted and corrpupted, it must be a problem withthe Hard Drive....So I bought a new one, and I've still had the BSOD error (although files haven't been deleted yet).
So yeah, I really need to solve this problem as it is taking away from my productivity and causing me to re-install far too often. I will post the BSOD info as well as my system info below (and a screen shot):
Quote
MACHINE_CHECK_EXCEPTION
*** STOP: 0x0000009c (0x0000000000000004,0xFFFFF80000113BC0, 0x00000000B2000000, 0x0000000000070F0F)
I looked that up on the net, and it seems the first part seems to indicate, or at least COULD indicate overheating. I checked CPU and System temps and they seem acceptable.
I am running Windows XP x64 Edition with the following hardware (please note that all of the hardware drivers I'm using are written for x64, MSI is so good:)). I have had this PC before it started having these problems, it could be related to using x64 I guess, but the error doesn't show that does it?
Quote
AMD Athlon 64 3200+ 2.0 GHz Socket 939 (Venice Core) w/ stock heatsink/fan
MSI K8N Neo4 Platinum S-939 nForce4 Ultra
OCZ PC-3200 DDR400 Premier Series 1GB (2x512MB) Dual Channel Kit CAS 2.5
Ati Radeon x800xl 256MB gddr3, PCI-E
LG 17" L1720B LCD monitor 16ms, 1280x1024
Western Digital Caviar 120GB SATA
Western Digital Caviar SATA II (WD1600JS) 160GB 7200RPM 8MB Buffer
Western Digital Caviar SATA II (WD2500KS) 250GB 7200RPM 16MB Buffer
Pioneer DVR-109 DVD-RW
Pioneer DVR-110D DVD-RW
Antec Sonata II Mid tower ATX black power supply 450 Watt ( ATX12V 2.01 )
Creative I-Trigue 2.1 L3450 speakers
Sony 1.44MB Floppy Disk Drive
Microsoft multimedia keyboard and Microsoft optical mouse (PS/2)
My OS and drivers are fully updated. As for my BIOS I've been running the version I'm using now forquite some time and I believe it is version 1.5. Also in another bad turn of events, my northbridge fan seems to be on its way out of this world (this just happned so I don't think its related to the BSOD). I haven't been able to find a replacement, and since its not spinning very fast, and sometimes stops...It's causing the heatsink to get quite hot. I need to get a new one, and I can't find them anywhere...I wonder if thats covered under warranty... I looked into getting a different heatsink, but my Graphics card is so colse to this heatsink, that theres no room for a bigger one at all.
Do you think this problem is motherboard related, I cannot understand what the technical info the BSOD gives me means, can anybody understand it? I don't think its my HD's, or Ram, or CPU...could it be a motherboard problem? And if so, its under 1 year old, can I get an RMA?
Thanks for the help in advance.

At one time I had a weak 450w psu that had only 18a on the 12v rail. When I overclocked my cpu and gpu, I was getting bsod's every once in a while and couldnt figure it out until I read a similar post like yours on this forum. I decided to upgrade my psu and havent had that problem since.
Power supplies can be deceiving. I now have a 480w psu but its has 30a on the 12v rail. So what we need to know is the ratings of your psu (see my sig) just to see if your psu is the culprit. Just my 2 cents.

K8N Neo4 Platinum Freezes playing ripped movie from hard drive???

Similar Messages

Maybe you are looking for