K8N Neo4 Platinum ... No Gigabit LAN option in bios menu.

I have been using my K8N Neo4 Platinum for 1 year. Yesterday I wanted to enable my Gigabit lan (marvel yokun). Strangely when I entered to bios to enable that LAN ... I didn't even find any option for enabling Gigabit LAN.
I have tried with updating my Bios. Nothing helped me. What could be the problem? And what should I do now?

Quote from: BOSSKILLER on 05-May-07, 08:43:04
which PCB version of K8N Neo4 Platinum you have it 1.0 or 3.0?
1.0 got dual LAN, till 3.0 got single LAN. see comparing here:
http://global.msi.com.tw/index.php?func=proddesc&prod_no=242&maincat_no=1
Yes, I have got 1.0 Motherboard.
Quote from: Richard on 05-May-07, 08:37:36
razibhasan,
I would try a different BIOS to see if it helps.
Take Care,
Richard
Yes, I have tried that too. No helps yet :(

Similar Messages

LAN issues with the MS-7125 (K8N Neo4 Platinum)

UPDARED BIOS:
MS-7125 (K8N Neo4 Platinum, K8N Neo4-F, K8N Neo4-FI)
One place it said: Online Ver. 3.77.000 One place it said: Online Ver. 1.D0
The system now displaces a new Bios boot screen and the boot up number is now 5.2.16.
XP all up to date and LAN drivers up to date.
I am seeing a saw tooth ping to my WestTel DSL modem. On all of the other PCs here on my LAN the first hop is always 0ms. After updating the mother board bios and turning on the LAN memory I still get 0ms to 7 or 10 ms.
You can see more detals at http://webviper.com/LanIssues.htm
Any Ideas please email me at [email protected]

Sorry the system did not email me.....
I did update the BIOS and I used the liveupdate. I also updated the NVIDA drivers with a link that MSI sent me. This did help things out a lot but the issue is still there. I have updated the web page with more info and pics. I have disabled the Xp firewall and have hooked the pc up to the westtell dsl modem.
After a reboot things run fine for about three hours... Then it starts and get worse as time goes on. It is not a heat issue as my new case has 10 fans and the read out of the CPU is good! 34C
Thanks for the help.... Here is some more data... Do look at http://webviper.com/LanIssues.htm
Regards,
WebViper [email protected]
UPDARED BIOS:
MS-7125 (K8N Neo4 Platinum, K8N Neo4-F, K8N Neo4-FI)
One place it said: Online Ver. 3.77.000 One place it said: Online Ver. 1.D0
The system now displaces a new Bios boot screen and the boot up number is now 5.2.16.
MSI support sent me a link for updated NVIDA drivers and that helped the issue some. I do not have the link to the drivers as my link to the MSI support is not working now. Not sure if they have deleted it or if their system is down.
Lan Cards and drivers:
NVIDA nForce Networking Controller
Driver:4.8.2.0 Date:4/6/2005
Marvell Yukon 88E8053 PCI-E Gigabit Ethernet
Driver: 8.14.1.3 Date: 9/19/2005
I feel that this is a Driver/XP issue. When i loaded the new NVIDA drivers that MSI sent the first hop went from 0-47 to 0-17.
http://www.nvidia.com/object/nforce_nf4_winxp32_amd_6.70.html
If only i could get the driver to make it 0 all the time like the other 4 computers that are on the same router.

K8N Neo4 Platinum LAN Question?

I am thinking about using a K8N Neo4 Platinum in a new system build, but MSI has me confused. Their website states the board and two (2) RJ45 Lan ports. However, I downloaded and read through the manual, and it only shows one (1). Anyone on the forum know which is true?

Quote
Their global site mentions only one LAN for the Platinium. So if you wait for two and you get only one they'll say it was..."optional".
When I look at the global site, it states: "Supports Dual Lan Jacks" & list 2 different chips.
Quote
Mine has two. (Just arrived today.)
Where did you buy your board?
Does your manual match your board or show just one jack?
Thanks for the response.

Lan issues with the K8N NEO4 Platinum NF4U 939 Motherboard

New K8N NEO4 Platinum NF4U 939 Motherboard.
After three or four hours the connection started to get unstable. I am a high end gamer and any net slowdown I see and feel.
Using my "Ping Plotter" program i saw the issue. The first hop to my router was going from 0 to 47ms. On all of the other conputers on this network hop one stays at 0.
In looking at the over all ping to my game server I noted that when hop 0 went to 47 it messed up all of the other hops and made the connection to my game server unstable.
The odd thing is I bypassed the onboard nic's and installed a PCI nic and it did the same thing.
I got with MSI and they had ne updare the NVIDA drivers. This lowered the swing to 0-17. I removed the PCI lan and am now back with the onboard nic. I have replaced the DSL modem, cable and removed the dlink and the issue is still the same.
This is my first computer with XP and at this point I do not know if this is an XP issue or a driver issue.
In installing a pci nic some of the network control is still done on the motherboard so that does not rule out a motherboard/chipset driver issue.
I have set up a web site that shows screen shots of the ping plotter. Please take the time to look at them and tell me what you think.
http://webviper.com/LanIssues.htm
Thanks for your help.
Regards,
WebViper

Hello !!
Please give more information about your system specs.
But i would try the following:
Download the latest nforce and vga drivers from nvidia ( if you are using nv VGA card ? ). Google for "driver cleaner" and download it.
Restart system and press F8 to enter safe mode. Now uninstall all nvidia drivers(chipset & VGA), and run Driver Cleaner after it. Select the nvidia tabs and remove them....
Now reboot, when prompted to install new drivers cancel this process. And start nvidia chipset driver setup, install all drivers but do not install the IDE driver from nvidia, you will be prompted for this.In first attempt you should not install nvidia firewall. Restart and install VGA drivers. Now test again your network connection. I hope it helps....
Greetz

K8N Neo4 Platinum SLI missing 1t/2t option in bios

Hey all,
I cant see 1t2t command rate option in my bios. It is disappered. Need help pls.
System:
K8N Neo4 Platinum SLI (7100v3A bios running)
AMD athlon 64 3700+ S939 san diego (brand ID:4, model:7, stepping:2)
A-DATA 2xddr 600
not: I saw some other ppl had similar problems with their platinum ultra bords and they did solve the problem by flashing their bios to previous one.
You can read that post in here:
https://forum-en.msi.com/index.php?topic=101464.msg740760#msg740760

Quote from: flobelix on 30-January-07, 21:44:59
??? I'm kind of confused... As I said I'm using the same board with the same bios and I can see and change 1T/2T.
Thanks for your reply,
Our mainboard are same but our cpu core are different. When I was using Venice everything was ok. Was using my Venice 9*300 with water cooling.
But now I have 3700+ SAN DIEGO .
Family: F
Ext. Model: 37
Revision: DH-E6
Quote from: flobelix on 30-January-07, 21:44:59
Where exactly are you trying to find this option in the bios? As Richard said make sure you enabled manual for CPU and Ram settings.
I know where I am looking.
User Config Mode --> [Manual] but there is only "Bottom of 32-bit" , "Read Preamble value" and " Async Latency value".
Quote from: flobelix on 30-January-07, 21:44:59
Please tell us exactly(!) what you changed in Cell Menu (core speed, HT, mem clock and so on), report your CPU model and stepping.
Did you clear cmos after(!) flashing 3.A mod?
After flash I remove my power cable for 1-2 mşnutes than press reset button. During post screen I enter bios to load failsafe defaults. After those steps I try to find what is good/bad with that bios.
Feel free to ask anything that can fix this problem.

K8N Neo4 Platinum and wake-on-lan

Hi,
I don't understand if the MSi K8N Neo4 Platinum has wake on lan capability..
There is in BIOS a setting in power manegement, but it's not loisting 'wake on lan'. In Windows (XP Pro), I can find a tool from MSI where I can setup a date/time for the PC to boot up, but nothing about WOL.
Can it do WOL ?
How does it work ?
Thanks for your help,
Rico

Wake On LAN, developed from Intel, provides remote wake-up technology that enables
systems to be remotely powered "on" for off hour’s tasks.
A result of the Intel-IBM Advanced Manageability Alliance and part of the
Wired for Management Baseline Specification, this technology helps save time on automated software
installations, upgrades, disk backups and virus scans.
Wake on LAN technology resides in a managed network adapter and on the system motherboard.
Please see the Intel web site for more information on WOL technology.
http://support.intel.com/support/network/sb/CS-000084.htm

Nforce 4 ultra k8n neo4 platinum need info

hi people. i need some help
im about to purchase a new mobo with nforce 4 ultra and i like msi k8n neo4 platinum (nforce 4 ultra + dual lan gigabit, 8 sata ports (4 nvidia) etc. i didn't whant sli by now so...
1° do you recommend this mobo?
2° i see lots of bios upgrade in the support page of this mobo, if there something i didn't like is to flash a bios several times, so i must upgrade bios at once with the latest or i must do it one by one?
3° am2 or 939?
4° there some bios or something upgrade to support raid 5?
5° y want to build this:
amd athlon 64 3000+
nforce 4 ultra msi k8n neo 4
1 gb ddr memory (kingston
msi nx7900gt256e or msi nx7600gt256e (depending of my pocket)
did you like it
ok
im actually have
duron 1600 applebred
768mb ddr 400 pc3200 memory
mobo nforce 2 ultra 400 msik7n2delta ilsr
msi geforce fx5700vtd128
thanks guys you are allways helpfull
bye

ivangelion, I have this board and it's a good choice.
So to answer your questions:
1. yes
2. No you can upgrade to newest right away [ver1.D]
3. 939. Most people/ forums are saying to wait awhile on the AM2
4. The Silicone Image RAID supports RAID 5 as it is now on this board.
5. That's a good starting point and you can amp it up from there as $$$ permits.
Good Luck and let us know if you need help along the way.

Strange power-on (issue?) with K8N Neo4 Platinum

Hi all, i have a new K8N Neo4 Platinum, non-sli.
My rig:
A643000+ winch, no overclock
2x512MB Corsair XMS DDR400MHz
2x200GB Seagate mirroring
Plextor PX-708A
BenQ DVD Burner
AN OLD Matrox Mystique 4MB PCI (new pci-e gfx card later...)
A powerfull enermax coolergiant 600W ATX 2.0 power supply
Latest official nforce4 drivers and bios
It seems to be ok: installed winXP pro sp2 and updates, installed two Seagate in raid-mirroring with the nforce4 controller, installed some progs and utils, firewall is ok, prime95 go without problems for 1 our (more tests later), cpu temp is 34°C and sys temp is 30°C.
CoreCenter Say:
Vcore -> 1.41V
3.3V -> 3.39V
+5V -> 5.13V
+12V -> 12.26V
memory volt -> 2.60V
FSB -> 200MHz
PCI-E -> 100MHz
cpu volt -> By-VID
Apparently no weird things...
When i switch-on the Pc, for some seconds( ̃10 secs) it don't want to boot, optical drives blink repeatly and the screen is blank, like a bad overclock... But the machine isn't overclocked, and the bios is ok, i think. After 10 secs, finally it go and run flawlessly, post and other things are ok. When i reboot in win, the 10secs-issue repeat itself. So this strange thing at the post is normal? Anyone with the same "problem"? For now the rig is ok when it logon in winXP...

Hi all my friends
@JER101 >>> Ehrr i mean post, sorry
I had unplugged the optical drives, but the problem persist. When plugged, they blink for some times and after blinking the machine go into post-phase and after it boot in the correct manner. I think the PCI card is the problem, like some of you said... I will buy one pci-e card (obviously), but i hope things are not dangerous for now
In the mean time, i have a new problem: emule+firewall=BSOD. I know, there are tons of post about this issue around, but the solution is unclear... Tried to disable DEP, patched WinXP SP2 with latest things from winupdate, but nothing work for me, emule and the firewall generate a crash&reboot. Tried with the Marvell LAN, too, without success.
Any suggestions? Usefull links? If i uninstall the "NVIDIA Forceware Network Access Manager" it will work without problem with a thirdy part firewall, like sysgate?
P.S.
What's the problem with nvidia drivers? C'mon nvidia, solve this damned issue!

Firewire/1394 devices are not auto-detected with k8n neo4 platinum

I am unable to detect firewire/1394 devices to my PC through my K8N Neo4 Platinum. That is, I plug in the device through the firewire port and windows doesn't detect that a device has been plugged in.
I have tried:
-2 firewire devices, both are Canon digital camcorders (ZR10 and ZR25MC)
-2 different firewire cables
-reinstalling windows, got all windows updates except
(Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520))
-patch from microsoft, discussed here
(https://forum-en.msi.com/index.php?topic=81749.0)
-both firewire devices using both cables connect just fine to a test computer
-both my computer and the test computer have Windows XP Pro SP2
Windows doesn't make the noise "bah-dum" that it has detected a device, nor does it display the dialog that gives me options of what programs to use. Once in a while, if I leave it connected for a while and come back, windows will eventually find it...or windows might bog down and get really slow. It speeds up again instantly once I unplug the firewire device. Strange, I know. Also there are NO conflicts in device manager.
Could it be?:
-bios misconfiguration
-need to use an older chipset driver (i am using most recent from nvidia.com)
-onboard audio or front audio needs to be disabled
-the k8n neo4 platinum simply has connection problems with some firewire devices
(i hope not)
Bob

Built2Last: (good questions!)
I tried your suggestion by removing PCI cards and made FURTHER progress. I found out that my firewire card, the Syba NEC1394-P3, has some compatibility issues with my other PCI cards. I found this out because:
1. it worked fine after I placed it in a non-comm (orange) slot and removed my soundcard (X-Fi) and Belkin wireless modem, and
2. a tech support representative from Syba told me that that particular firewire card has compatibility issues
Quote
Also, SD-NEC-4F is our older model firewire card.
Our new firewire card (SD-PCI-4F) is using VIA VT6306 chipset and no customer complain about any installation issue so far.
If the SD-NEC-4F still giving you trouble, I'll suggest you to return it and exchange for the SD-PCI-4F firewire card.
At least he is honest and wants to help, so I remain impartial towards Syba.
So I figured out the firewire card, but not the onboard firewire. Ok, but check this out! When the Syba card was working, I could plug in BOTH the external hard drive AND either of the Canon camcorders to the Syba firewire card. Windows all three devices just fine. Again, the onboard firewire would ONLY detect JUST the external hard drive, but would not detect either of the Canon camcorders. It seems as though the ball again is knocked back into MSI's court on this issue. Any ideas?
syar2003:
As for drivers, I checked for drivers for: onboard firewire, add-in firewire card, and Canon camcorders.
-I cannot find where there is an MSI firewire driver for my onboard firewire port. I originally guess that it was part of my chipset driver installer, but the README doesn't say anything about it. It is also not an additional download on MSI's website. But since it detects an external hard drive I figure I must already have it.
-The add-in firewire card does not have drivers. I repeat, they do not exist. The manual and Syba's website both state that drivers for the card are included all versions of Windows back to Windows 98.
-Canon's website has a driver/software download page but it also appears that drivers do not exist for the Canon camcorders.
Yes the camcorder is set to VCR mode.
Yes the IEEE1394 is correctly installed, since external hard drive connects okay.
I tried two DV cables and both are connected fine.
The camcorders do not support USB as far as I can see, and if they do, I'm not using it.

MicroStar K8N Neo4 Platinum 54G - nForce4 Ultra Avilability in CZ

Hi all,
does anybody know when M/B MicroStar K8N Neo4 Platinum 54G - nForce4 Ultra will be avilable in Czech Republic (Europe)??? I'm waiting two months for it...

Not really (maybe AC97 Controller = Auto was the closest). But, I tried now to switch the LAN cable to the upper RJ-45 slot instead of the lower one, and it seem to have stopped the power on peculiarity. Now only if I could pinpoint what's the broken component that causes the boot screen freeze and what causes the 35-45s idle time at the Win-logo loading screen.
The freaky boot screen freeze happens something like this:
1. the mother board model number is shown
2. the CPU information is shown (or sometimes this is skipped and not shown)
3. here it may or may not freeze and usually it produces this terrible out of sync mess (and monitor has to be switched off to get it back to normal)
I don't see any connection to overheating, I never touched any overclocking settings (or any other settings for that matter, it's a 2-day old installation).

Difference between K8N Neo4 Platinum/SLI and K8N-SLI Platinum

Hey guys.... I have one question and i hope you can help me.
I'm about to get an MSI SLI Platinum motherboard, but it seems that there are two versions, the K8N Neo4 Platinum/SLI and the K8N-SLI Platinum.
What is the real difference between them? As i can see in the manual, the Neo4 version has the additional SATA2 and Gbit LAN controller.
Anyone: Does your K8N-SLI board have 4 or 6 SATA2 ports? and 1 or 2 LANs?
At this picture http://www.midtdata.dk/asp/index.asp?varernr=K8N-SLI-PLAT&goto=productinfo&mainfunc=link I can see that there are 6 blue SATA connectors (lower right corner), and 2 LAN ports left to the LPT port... But the description says 4 SATA and 1 LAN, and so says the manual.
To all owners of this mobo: Does this picture look like your K8N-SLI Platinum or does it look like your K8N Neo4 Platinum/SLI ?

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

K8N Neo4 platinum edition v1 (bios W7125NMS V1.6 062305) -- after POST stucked

hi i'm runningan athlon 3000+ in K8N Neo4 platinum edition v1 (bios W7125NMS V1.6 062305) and i have a very like problem:
today i tried to install freebsd(install started fine, nothing went wrong, i repartioned my hdd and the installer started),
for some reason i had to abort the installation process. since then i can not boot in from any device(cd,usb the hdd is in a
half way to bsd install state so it's not an option atm).
the post screen comes up and i can interact with it in a way(i can press tab and it drops me
to the detailed post screen,ctrl-alt-del also works i can restart with it), but i neither can enter to the BIOS setup /DEL/ nor the boot menu /F11/.
i've tried reseting bios settings by flushing cmos(removed the battery,pressed SW1. something must happened because the post now checks for sata devices
and the graphical screen/that one u can bypass by pressing TAB/ was not presented before).
it also detects my hdd and my cd-rom too. but still nothing happens after the POST.
others said updating my bios would help. but still there is no option to boot from.
if i am doing wrong something please let me know,
thank you for your help
Andrew

the solution:
disable ide1/slave when the broken hdd is not connected and bios accessible; poweroff; reconnect the broken hdd to the PC;poweron; boot from a linux livecd; gpart/fdisk/something to repair the broken hdd;be happy life is nice
the trick was that bios and post is not messing with the broken hdd(while it was blocked in the bios)
so i could boot with a live cd when my hdd was connected to the PC.
since linux trixx out bios i was abel to interact with the post_killer_hdd (even it was blocked in the bios).
i hope somebody will be able to use it one day if something is not understandable drop me a PM.
problem solved im installing the os to the hdd,topic is SOLVED.
maybe the other guy who has some similar issues with his config/hdd could use this post too.
regards,
/\ndrew

RMA'ed K8N Neo4 Platinum board, no sound on the new board's output

Hi Folks,
I just got back the replacement for the K8N Neo4 Platinum boad I sent in a month ago. The good news -- my mirrored RAID array came back up and my WinXP/SP2 setup looks fine. The bad news -- my front speaker output doesn't put out any sound. My Amplified 2.1 speaker set was plugged into my older machine and working fine, and I just swapped the speaker cable into the green output plug on my MB, and no sounds comes out. Sounds was working on the previous MB which I sent in for RMA, so the software on my HDD's should have been set correctly to generate sounds on the new MB.
First, any suggestions on how to get the sound outputs working? Second, any pointers on how to diagnose what's going on? Should I be seeing "Realtek '97" (or something like that) for the playback and recording devices, for instance?
Thanks in advance for the help!
Clark

Couple of things come to mind. Power on the system and head on' over to the bios. Ensure the audio onboard is actually turned on...or if the board they sent you had it disabled.
Check the Device manager for any "!" in yellow next to anything in the audio dept. (windows control panel/system/hardware...yadda yadda....) If the onboard audio is turned 'on' and windows is seeing it? You'll have a heading for AC '97 listed, and also under sound effects options in the control panel it should be listed. If it's listed as working 'ok'? I seem to remember a set of jumpers on the motherboard for audio output. In the manual it's listing as follows:
"If you don't want to connect the front audio header, pins 5&6, 9&10 have to be jumpered in order to have signal output directed to the rear audio ports. Otherwise the line-out connector on the back panel will not function" That's out of my manual regarding JAUD1 connector. And I have the Neo4 K8N board.
Best of luck!
S-

K8N Neo4 Platinum/SLI

I am confused with regard to what is actually included with the K8N Neo4 Platinum/SLI board in the US. Unfortunately, MSI isn't very clear with their information.
Does this board include the following, or are they optional, & if optional how can I get them:
IEEE 1394 (Firewire) ports (1 external, 2 internal)
SPDIF Out
D-Bracket 2
SATA 5-6 ports
Anybody actually have this board installed & running yet, & would you buy this board if you were starting all over again? Were your experiences with this board good or bad? Any gotchas?
Thanks

Quote
Unfortunatly, the MSI-websites (american, european, taiwanese) all have slightly different specs listed, but none exactly covered what my package included.
I've read numerous posts about MSI motherboards & video cards not meeting the manufacturer's claimed specifications. This deeply troubles me, & makes me wonder if I should buy MSI products at all.
Quote
f you buy 2 6600GT's now, you're stuck on the performance of about a single 6800GT, less in some cases.
If you buy a 6800GT now, you get the same bang, but have the option to add anotherone later to up your rig!
Exactly my point! I just can't see paying extra money on a high-end, bleeding-edge SLI motherboard, then populating it with 2 mid-level graphics cards. I suppose that seems logical to some people, but not me. I've also read in the reviews that the attachment of the heatsink/fan on the 6600GT is not physically secure, & many of the heatsinks aren't properly attached to, or making full contact with, the GPU on retail versions of the cards!
Of course, SLI is still very much a technology that has yet to prove its promise. Very few games support it, & teething pains abound. We're still in the verion 1.0 of SLI motherboards, which is kind of scary, & all of the current crop of SLI motherboards seem to have their "issues." nVIDIA is lagging behind in releasing updated video card drivers. Maybe SLI isn't quite "ready for primetime" yet.
Quote
An Ultra would be a waste of money. The difference is not worth the extra dough for it, and a brand GT can
be clocked to Ultra-levels as well.
Some people would not want to spend the extra $ on an Ultra, but others might feel that it is well worth the cost. Sure, you can overclock a GT to gain a bit of extra performance, but what levels of performance can you gain by overclocking the Ultra? I don't know the answer to this. I still have a lot of research to conduct concerning the nVIDIA 6800GT & Ultras, & the "real world" viability of SLI.

K8N Neo4 Platinum/SLI only showint 2.75Gb ram with 4Gb installed WinXP64

Hi there,
I have an MSI-7100 K8N Neo4 Platinum SLI, and I noticed that under WindowsXP Pro 64-bit, only 2.75 of the 4Gb installed are used by Windows.
Is there something I'm doing wrong? My RAM is identical GEIL Single-Channel PC3200 1Gb DDR, four of them.
-El Queso

Hi,
You need toenable the Hardware memory Re-Map Option.
You may need the latest bios - I only have a Neo2, so I don't know if/when ReMap was added to the Neo4.
Also... it's possible you also need a Rev E CPU for hardware re-mapping to work.
Peter

K8N Neo4 Platinum ... No Gigabit LAN option in bios menu.

Similar Messages

Maybe you are looking for