K8N Neo4 Platinum SLI and BIOS goofiness

A couple nights ago I figured I'd flash my K8N Neo4 Platinum SLI to the latest BIOS version, since I hadn't touched it in over a year. I was using 3.1, and I decided to use the 3.A. Big mistake. Computer boots fine, but immediately bluescreens as soon as Windows tries to load. After diddling around on my brother's computer trying to make a bootable CD, I manage to get back to a state where I can flash again, and try the 3.7. Same problem...bluescreen on Windows startup. At that point I just gave up and went back to 3.1, ignoring the 3.3 and 3.2 BIOSes.
Is anyone else having issues trying to flash the more recent BIOSes?
(I just recently found out that MSI's US site doesn't have a complete list of available BIOSes, while the Taiwanese site does. I might have to give 3.9 and 3.8 a try.)
EDIT: My system specs are in the link in my sig.

Ok, quick update. I just spent about half an hour with 3.1, 3.2, 3.3, 3.4, 3.7, 3.8, 3.9, and 3.A. None of them work except 3.1...they all bluescreen while starting Windows. I made sure to clear the CMOS completely, yes I left APIC/MPS settings the same (they've always been on default so that hasn't been an issue), and I tried the various safe modes.
Here's the error code given on the BSOD: 0x0000007B (0xF78A6528, 0xC0000034, 0x00000000, 0x00000000)
A quick search on the 0x0000007B error code gives a fairly lengthy MS KB article, but no real solution. I'm at a loss as to why 3.1 works great but nothing else does.

Similar Messages

Difference between K8N Neo4 Platinum/SLI and K8N-SLI Platinum

Hey guys.... I have one question and i hope you can help me.
I'm about to get an MSI SLI Platinum motherboard, but it seems that there are two versions, the K8N Neo4 Platinum/SLI and the K8N-SLI Platinum.
What is the real difference between them? As i can see in the manual, the Neo4 version has the additional SATA2 and Gbit LAN controller.
Anyone: Does your K8N-SLI board have 4 or 6 SATA2 ports? and 1 or 2 LANs?
At this picture http://www.midtdata.dk/asp/index.asp?varernr=K8N-SLI-PLAT&goto=productinfo&mainfunc=link I can see that there are 6 blue SATA connectors (lower right corner), and 2 LAN ports left to the LPT port... But the description says 4 SATA and 1 LAN, and so says the manual.
To all owners of this mobo: Does this picture look like your K8N-SLI Platinum or does it look like your K8N Neo4 Platinum/SLI ?

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

K8N NEO4 PLATINUM SLI BETA BIOS

WHERE CAN I DOWNLOAD IT? DO I HAVE TO INSTALL IT FROM FLOPPY?

which one is the BETA BIOS? none of them seem to be a BETA?
Model Version Size Platform BIOS BIOS Date Counter
K8N Neo4 Platinum SLI (MS-7100) v. 3.6 353 kb AMD Award BIOS 7/22/2005
1. This is Award BIOS release.
2. This BIOS fixes the following problem of the previous version:
- Update CPU ID for E6.
3. 2005/07/22
Model Version Size Platform BIOS BIOS Date Counter
K8N Neo4 Platinum SLI (MS-7100) v. 3.3 358 kb AMD Award BIOS 5/10/2005
1. This is Award BIOS release.
2. This BIOS fixes the following problem of the previous version:
- Update SiI3132 Raid ROM version to 7.2.18.
- Update NVRAID version to 5.27.
- Update NVPXE version to 2.12.
- Update NVMM version to 4.94.
- Update CPU ID for Sempron E3 2000MHz/59W.
- Update CPU ID for Sempron D0 1800Mhz/59W.
- Support K8 Dual Core CPU.
3. 2005/05/10
Model Version Size Platform BIOS BIOS Date Counter
K8N Neo4 Platinum SLI (MS-7100) v. 3.2 358 kb AMD Award BIOS 3/30/2005
1. This is Award BIOS release.
2. This BIOS fixes the following problem of the previous version:
- Update SiI3132 RAID ROM version to 7.1.05.
- Update CPU Microcode for Sempron D0 2000MHz CPU.
3. 2005/03/30
Model Version Size Platform BIOS BIOS Date Counter
K8N Neo4 Platinum SLI (MS-7100) v. 3.1 359 kb AMD Award BIOS 2/21/2005
1. This is Award BIOS release.
2. This BIOS fixes the following problem(s) of the previous version:
- Updates NVPXE version to 2.03.0469.
- Updates CBROM version to 1.47.
Model Version Size Platform BIOS BIOS Date Counter
K8N Neo4 Platinum SLI (MS-7100) v. 3.0 359 kb AMD Award BIOS 12/31/2004
1. This is Award BIOS release.

Strange findings with K8N DIamond/Platinum SLI and BIOS 3.6

Having toiled for weeks trying to get my machine to run at 1T timings fully stable at memory speed 550DDR, I have finally done it.
What you have to do is this...make sure that your NB voltage is the same or greater than your CPU Voltage.
I had my CPU at 1.45+6.6% =1.546v and my NB at 1.5v. This would not work.
I found out by accidentally putting 1.6v through the NB and Voila!
Not only that but the RAM is now doing great at 285MHz (570DDR with 2.5-4-4-8 1T at 2.80v).
All been stable through all benchmarks and SuperPi/Memtest for 2 days in total now.
Updating my profile to match.
My God it feels good.
I hope that this helps some folk who have stability problems in any area.
K6dude

I have not tried the 3.7 BIOS, as it is all working well. I don't want to inherit any new bugs...I'll wait until someone tests it all properly.
I wish that the 183 mem divider would be put back, I'm having to adjust it from 166 to 183 with A64Tweaker on startup.
Anyone know if 3.7/1.7 has the 183 divider?
Yes I was only successful current CPU speed with BIOS 3.2, 3.5 and 3.6, so try 3.6 and maybe 3.7 with my settings...you might be lucky.
After you have flashed your BIOS, reset the CMOS button TWICE...and make sure that the PSU has no power going into it and you have no seperately powered USB devices attached while you reset it (This has found to be the case for me with my USB Keyboard/mouse devices), otherwise it will not reset properly and some of your old bugs could still be there.
What week Venice CPU do you have...0517 is mine and it is so far one of the best batches...this could make a difference in some cases.
K6dude

K8n Neo4 platinum sli and RAM placement

Hi all,Im a bit of a spazz when it comes to upgrading so was hoping you guys could help.
I have just purchased two 1 gig ram sticks to add to my 1 gig in the machine,Ram sticks are as follows:
1 gig pc3200 ddr400(double sided)
1 gig pc3200 ddr400(double sided)
512mb pc3200 ddr400(double sided)
512mb pc3200 ddr400(single sided)
Now ive noticed there is different colours on the slots so was wondering if the ram listed above should be put onto the motherboard in a certain order,and after installing it do i need to change any settings on teh pc or bios.
Thanks to anyone who can advice me on this issue.

should be fine to put straight in
the manual says
"Always insert the memory modules into the GREEN slots first, and
it is strongly recommended not to insert the memory modules into
the PURPLE slots while the GREEN slots are left empty."
also you do know that your ram will run at ddr333 rather than ddr400 - this is due to using all four slots on the mainboard

K8N Neo4 Platinum SLI missing 1t/2t option in bios

Hey all,
I cant see 1t2t command rate option in my bios. It is disappered. Need help pls.
System:
K8N Neo4 Platinum SLI (7100v3A bios running)
AMD athlon 64 3700+ S939 san diego (brand ID:4, model:7, stepping:2)
A-DATA 2xddr 600
not: I saw some other ppl had similar problems with their platinum ultra bords and they did solve the problem by flashing their bios to previous one.
You can read that post in here:
https://forum-en.msi.com/index.php?topic=101464.msg740760#msg740760

Quote from: flobelix on 30-January-07, 21:44:59
??? I'm kind of confused... As I said I'm using the same board with the same bios and I can see and change 1T/2T.
Thanks for your reply,
Our mainboard are same but our cpu core are different. When I was using Venice everything was ok. Was using my Venice 9*300 with water cooling.
But now I have 3700+ SAN DIEGO .
Family: F
Ext. Model: 37
Revision: DH-E6
Quote from: flobelix on 30-January-07, 21:44:59
Where exactly are you trying to find this option in the bios? As Richard said make sure you enabled manual for CPU and Ram settings.
I know where I am looking.
User Config Mode --> [Manual] but there is only "Bottom of 32-bit" , "Read Preamble value" and " Async Latency value".
Quote from: flobelix on 30-January-07, 21:44:59
Please tell us exactly(!) what you changed in Cell Menu (core speed, HT, mem clock and so on), report your CPU model and stepping.
Did you clear cmos after(!) flashing 3.A mod?
After flash I remove my power cable for 1-2 mşnutes than press reset button. During post screen I enter bios to load failsafe defaults. After those steps I try to find what is good/bad with that bios.
Feel free to ask anything that can fix this problem.

K8N Neo4 Platinum/SLI only showint 2.75Gb ram with 4Gb installed WinXP64

Hi there,
I have an MSI-7100 K8N Neo4 Platinum SLI, and I noticed that under WindowsXP Pro 64-bit, only 2.75 of the 4Gb installed are used by Windows.
Is there something I'm doing wrong? My RAM is identical GEIL Single-Channel PC3200 1Gb DDR, four of them.
-El Queso

Hi,
You need toenable the Hardware memory Re-Map Option.
You may need the latest bios - I only have a Neo2, so I don't know if/when ReMap was added to the Neo4.
Also... it's possible you also need a Rev E CPU for hardware re-mapping to work.
Peter

PSU Dead and MOBO K8N Neo4 Platinum SLI Too, what can i do???

Yerterday i was sleeping and suddenly the PSU (Rosewill RP550) Blow away, I Inmediatly check the PSU and guess what? Fried!!! Then i went to sleep again to check the other components in the mourning. The next Mourning i took my old PSU and put an 20 to 24 pin adapter, placed it in the mobo and doesn´t work, next i put a friend PSU with 24 pin connector and nothing, next i test 2 or 3 PSUs more and nothing. After all this tests i started thinking that the mobo was having electrical issues. I went to a friend house and tested the processor ( AMD 3000+ CBBID 0505) and the Memory (OCZ Rev2 1GB), they worked. I couldn´t test the Video Card (MSI 6600GT 128MB) because i dont have any other mobo to check it.
Its Important to tell you guys that when i try to plug the PSU power conector to the MOBO the Fans and network led start for 1 second, then turn off, i try to start the computer and nothing happend. All this with the four PSUs.
A friend of mine which is a computers Technician told me that took off the MOBO batery, CPU and Memory and put Aluminiun foil all over and around the mobo to eliminate any static on it. What do yo think about this??
Please if you have any suggestion, i´ll be happy.
BTW: Which are the procedures to RMA both componnets ? I bough the mobo and PSU and the others components on www.newegg.com on May 09 2005.
Thanks for all.

Got my Newegg RMA board back (K8N Neo4 Platinum SLI) today! I mailed it to them Friday, they got it Monday and a replacement back to me today. Excellent turnaround
The board looks like it was refurbished because the anti-static bag was a bit wrinkled and had pinholes all over one section where the board couldn't have caused it. Also, it had bios 3.0 on it! The rest of the stuff in the board looks new but it didn't come with the USB 2.0 bracket which the first board I got did. Live and learn.
I flashed it to 3.2 and all appears to be working. Not gonna try 3.3. I read somewhere that there may be a beta 3.5 bios out somewhere. Maybe I'll wait till that one goes final.
Haven't had any experience with MSI support as far as RMA's but if this replacement board craps out I'll try them next.

X2 3800+ (E6) support for the K8N Neo4 Platinum/SLI

Hi everyone:
I have decided to purchase the K8N Neo4 Platinum/SLI (MS-7100-020) and I ready placed the order. However, I wonder if it supports the AMD X2 3800+ (E6 Version) CPU? The reason I asked the question because I found the following table from the Taiwan MSI web site which shows that X2 3800+ E6 is undertesting.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Thank you for any replies.

Mine worked, ran for 2 weeks already at stock, tried & ran to 2.2GHz on stock HSF with no problem.
Using X2 3800+ E6, MSI K8N PLI Platinum mobo, 3.7 bios & Inno3D 7800GTX single latest nvidia 78 drivers, 2x512MB DDR400 CL2.5 Kingston Ram, Hitachi T7K250 Sata 250GB HDD, NEC ND-3530A Benq 1640, , Silverstone Zeus 650W PSU
At first I have this concern too, but tried it anyway.
See my screenshots for your info.

MSI K8N Neo4 Platinum SLI sound needs -5V; newest Antec 550W has no -5V rail

I came within a whisker of ordering a non-returnable 3700 Venice, MSI K8N Neo4 Platinum SLI mobo and an upgraded Power Supply, Antec's newest 550W PS the TP2-550 EPS12V ($117). This has dual 2x24pin 12V 19A rails and is touted as the new V2.0 EPS12V/ATX12v compatible power supply for high performance SLI systems. By accident I came across a page at MSI for this mobo
http://www.msi.com.tw/program/products/mai...ail.php?UID=641
At the end is this warning: MSI Reminds You...
• For this model, you must use a Power Supply which has a -5V pin supply. Also, the users manual which I downloaded on Pg 2-10 says the same thing
The above Antec PS specs do not show a -5V rail, nor does an Enermax 600W I looked at. The V2.0 specs for ATX12v which added 2x24pin 12V rails dropped -5V rail from the spec and it appears MSI is not conforming to the spec (See Antec response at end) None of the web sites selling these PS & mobos contain any warning. I vaguely recall from a forum a while back it may have something to do with the Soundblaster system in the mobo.
http://www.antec.com/us/productDetails.php?ProdID=22551 (click specifications)
Isn't this a major showstopper which is going to cause a lot of grief for those of us upgrading to SLI systems using this mobo and upgrading our PS to the newest & best power design? We won't know the PS won't work until we build the system.
Regards, Ron
Antec reply to me:
>>>>Thanks for the link. Since MSI's website does state the motherboard needs the -5v, the True550EPS12V will not work with this motherboard. The Standard (http://enhanceusa.com/documents/atx12v_v2.01.pdf) has removed the use for the -5v rail and it is no longer needed. MSI has not manufactured that motherboard to the Standard. Finding an ATX12V v2.0 power supply with the -5v might be hard to find. You should contact MSI for a compatibility list of power supplys that were tested to work with the K8N SLI Platinum.

Quote from: ccve3 on 21-May-05, 07:27:40
Wow!! syar2003 thanks for that post. I've spend an hour going through it & fasteddies links. Now I are a power expert. The dual rail argument is enough for me to go back to the MSI K8N Neo4 Platinum SLI with one of the single rail PS -5V units listed by fasteddie. The only question left now refers to computerpro3 recommendation on ultra power supplies for SLI
>>I quite simply wouldn't dream of putting anything else in my machine. Keep in mind, this section is for 2x 6800 models, not the 6600's which most any good psu will handle (like Antec Neopower, ocz 520, etc). . Pc Power and Cooling 510 Deluxe SLI edition (refer to list)
2. Zippy/Emacs 550-700w models
3. OCZ 600w (personally I would get the pcp&c for the price, but it's been proven here, so I'll be fair...).
These are really high end, expensive and only 3-4 choices. Since I'm getting one 6800GT and eventually another & possibly eventually a 4800 X2, I was hoping the OCZ 520W would do it but computerpro3 says Powermaster 520 isn't good enough for SLI. I found that there is an OCZ 600W ATX12 dual rail which surprisingly has a -5V rail needed for K8N Neo4 SLI Soundblaster. Will this meet computerpro3's preference for a high end PS for SLI systems even though I'm losing the 1 rail advantage. Maybe the 600 Watts just overwhelms the 1 rail/2 rail question.
Thanks again for the teriffic help
Regards, Ron
Wondering what you settled on. I got the Antec TP550 and it's flawless on the board. I even have the older 20pin model which works perfectly (including sound). If you really wanted what I would consider to be a top dog (pcpower and cooling), and find the -5v rail missing, all you have to do is place a phone order and request they add a -5v rail. It's a minimal cost and a total solution for having everything. Just my $0.02

How are some guys running an Athlon 3800+ X2 chip on the K8N Neo4 Platinum SLI?

I see many people running an AMD Athlon 64 3800+ X2 Dual Core proccessor on a K8N Neo4 Platinum SLI board, but mine dosen't work. I don't get any signal to my monitor (don't know if this is the cause). MSI says the 3800+X2 dosen't support the SLI board, but many people got it to work. Any one know how?

Mine working fine, but on cold boot, sometime it hang on me. I have changed 3 PSU to get it stable, from Coolermaster 450W, Be Quiet 520W to Silverstone 650W, ambient 25C, CPU 30C, Proc 37C.
Bios 3.7 the one they are still testing.
Have you check you PSU rails volt., disable CnQ,....
So far stable, multiple programs at once with no significant drop in responseness & speed, Half Life 2, P2P downloading x2, IE x 3, encode DVD at the same time.

K8N Neo4 platinum edition v1 (bios W7125NMS V1.6 062305) -- after POST stucked

hi i'm runningan athlon 3000+ in K8N Neo4 platinum edition v1 (bios W7125NMS V1.6 062305) and i have a very like problem:
today i tried to install freebsd(install started fine, nothing went wrong, i repartioned my hdd and the installer started),
for some reason i had to abort the installation process. since then i can not boot in from any device(cd,usb the hdd is in a
half way to bsd install state so it's not an option atm).
the post screen comes up and i can interact with it in a way(i can press tab and it drops me
to the detailed post screen,ctrl-alt-del also works i can restart with it), but i neither can enter to the BIOS setup /DEL/ nor the boot menu /F11/.
i've tried reseting bios settings by flushing cmos(removed the battery,pressed SW1. something must happened because the post now checks for sata devices
and the graphical screen/that one u can bypass by pressing TAB/ was not presented before).
it also detects my hdd and my cd-rom too. but still nothing happens after the POST.
others said updating my bios would help. but still there is no option to boot from.
if i am doing wrong something please let me know,
thank you for your help
Andrew

the solution:
disable ide1/slave when the broken hdd is not connected and bios accessible; poweroff; reconnect the broken hdd to the PC;poweron; boot from a linux livecd; gpart/fdisk/something to repair the broken hdd;be happy life is nice
the trick was that bios and post is not messing with the broken hdd(while it was blocked in the bios)
so i could boot with a live cd when my hdd was connected to the PC.
since linux trixx out bios i was abel to interact with the post_killer_hdd (even it was blocked in the bios).
i hope somebody will be able to use it one day if something is not understandable drop me a PM.
problem solved im installing the os to the hdd,topic is SOLVED.
maybe the other guy who has some similar issues with his config/hdd could use this post too.
regards,
/\ndrew

HELP ! CPU question on MSI K8N Neo4 Platinum/SLI Motherboard

Hello i've a simple Question : Does A64 3400+ S939 works on this board ?

Hi douglasp,
Things haven't changed since K8N Neo4 Platinum SLI + athlon 64 3400+ ????
There is no AMD64 3400 939 CPU - see AMD Athlon™ 64 Processor Model Numbers and Feature Comparison
754 CPu are single channel compatable withK8N Neo Platinum
939 CPu are Dual channel. compatable with K8N Neo4 Platinum
as someone said in previous thread it's probably a misprint.

K8N Neo4 Platinum/SLI

I am confused with regard to what is actually included with the K8N Neo4 Platinum/SLI board in the US. Unfortunately, MSI isn't very clear with their information.
Does this board include the following, or are they optional, & if optional how can I get them:
IEEE 1394 (Firewire) ports (1 external, 2 internal)
SPDIF Out
D-Bracket 2
SATA 5-6 ports
Anybody actually have this board installed & running yet, & would you buy this board if you were starting all over again? Were your experiences with this board good or bad? Any gotchas?
Thanks

Quote
Unfortunatly, the MSI-websites (american, european, taiwanese) all have slightly different specs listed, but none exactly covered what my package included.
I've read numerous posts about MSI motherboards & video cards not meeting the manufacturer's claimed specifications. This deeply troubles me, & makes me wonder if I should buy MSI products at all.
Quote
f you buy 2 6600GT's now, you're stuck on the performance of about a single 6800GT, less in some cases.
If you buy a 6800GT now, you get the same bang, but have the option to add anotherone later to up your rig!
Exactly my point! I just can't see paying extra money on a high-end, bleeding-edge SLI motherboard, then populating it with 2 mid-level graphics cards. I suppose that seems logical to some people, but not me. I've also read in the reviews that the attachment of the heatsink/fan on the 6600GT is not physically secure, & many of the heatsinks aren't properly attached to, or making full contact with, the GPU on retail versions of the cards!
Of course, SLI is still very much a technology that has yet to prove its promise. Very few games support it, & teething pains abound. We're still in the verion 1.0 of SLI motherboards, which is kind of scary, & all of the current crop of SLI motherboards seem to have their "issues." nVIDIA is lagging behind in releasing updated video card drivers. Maybe SLI isn't quite "ready for primetime" yet.
Quote
An Ultra would be a waste of money. The difference is not worth the extra dough for it, and a brand GT can
be clocked to Ultra-levels as well.
Some people would not want to spend the extra $ on an Ultra, but others might feel that it is well worth the cost. Sure, you can overclock a GT to gain a bit of extra performance, but what levels of performance can you gain by overclocking the Ultra? I don't know the answer to this. I still have a lot of research to conduct concerning the nVIDIA 6800GT & Ultras, & the "real world" viability of SLI.

No Post - K8N Neo4 Platinum SLI - any help would be awesome

Ok here it goes. I recently bought a K8N neo4 SLI and set everything up, hit the power button, and nothing happened. So i figured it was DOA and i sent it back. got another one, hooked it up and nothing happened. Tested the PSU and power switch on a different machine and they work fine. But with the K8N i have nothing, no fans, no lights, nada. I am a relatively experienced computer builder and haven't had this one happen to me yet. I've read every troubleshooting guide on the MSI site and i think everyone in the forums but the dang thing still won't turn on. Here the specs:
K8N Neo4 Platinum SLI
Athlon 64 3200+ 90nm
512 x 2 Geil Ultra Platinum DDR 533
Seagate SATA HD 7200 RPM 160 GB
Chaintech 6600GT
Ultra X-connect 500W with the 24-pin adapter
Got a bunch of other junk too but thats all thats hooked up now. just going for the bare minumums so i could at least get some response. Please give me some ideas of what could be causing this are maybe something dumb i forgot. I know my power suppply blows but i've seen others get it going with that and since i only have barebones hooked to it, i'd think it would go. Thanks in advance.

I had an interesting thing happen to me yesterday, that sounds exactly like your problem.
I'm looking for ways to reduce my gpu temps, so I'm playing around with case fans, round wiring, etc... One of the cables I replaced ran to one of my PCI-E cards. aparently it had a short or something in it. I spent hours trying to get my computer to start up again, I was afraid I had fryed the board....no power, no fans, tried a different power supply, etc..... One wire, well two, because it's one of those that takes two molex plugs and turns them into a Pci-e plug.
What a pain....
Chack your wires, check for a short. If you're having the same issue with a second mobo chances are it's not board related. Could be you have the srews attaching it to your case to tight and have shorted it out there.
Hope this helps.
Good luck!

K8N Neo4 Platinum SLI and BIOS goofiness

Similar Messages

Maybe you are looking for