K8N Neo4/SLI - New CPU: Athlon 64 X2 3800+ OR AMD Athlon 64 4000+

I want a new CPU ... Which of these will make a bigger difference over my current Athlon 64 3000+
Or would someone please suggest a better CPU (under ~$90).  TIA!

Thanks for the help!  I use the system for some gaming, media "server", burning DVDs, and usenet mostly.  But the biggest reason why I want to upgrade is that I run TVersity http://www.tversity.com/home (software to stream any video through an XBox 360 to your home theatre).  Because the XBox 360 will only play .wmv files without 3rd party software (TVersity).   TVersity requires a powerhouse computer because it converts (on the fly) any video extension to .wmv and streams it out to the XBox 360.  If the PC isn't powerful enough the video stutters and the audio skips. 

Similar Messages

  • K8N Neo4/Sli / Rev.e Cpu

     Will the K8N Neo4/Sli (MS-7100-020) Board boot with the New AMD64 Rev-e San Diego CPU?

    Should. Mine does.  Here's some chatter.... https://forum-en.msi.com/index.php?topic=79543.0
    A lot of talk in the Nvidia based forum rather then this one.

  • K8N Neo4/SLI Model Name?

    What is the Model Name for the K8N Neo4/SLI? Everest is reporting MS-7046, 7100 and 7125 and for some reason it's not listed on the following page;
    http://www.msi.com.tw/html/products/mainboard/mb_htm/mb_comparison.htm
    It's also not listed here for some reason,
    http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=68&NAME=Socket%20939%20(AMD%20K8)
    Nor is it listed on the U.S site,
    http://www.msicomputer.com/product/p_list.asp?class=mb&cpu=1#AMD939

    Quote from: OPaul on 08-August-06, 11:36:36
    I found out in the following thread that the Neo4/SLI and SLI Platinum are actually different boards, and the model name for mine is 7100-030.
    https://forum-en.msi.com/index.php?topic=99625.new#new
    oh, totally forgot about the 7100-030. an easy way to verify it is to use the CPU-Z.
    the neo4/sli was the designation that they have used for the 7100 Platinum SLi in the begining for US. i just checked the US site but i've seen that it has been removed from there and only the -f version is listed with the nf4 sli chipset.
    sry again, i never thought they will change a mobo designation after a year.

  • K8N Neo4/SLi - Keeps detecting Raid at bootup

    Hello everyone,
    My K8N Neo4/Sli non platinum board keeps detecting IDE raid at bootup.  Am I supposed to load the raid drivers on the floppy even though I don't have it enabled in the bios?  That may be a separate question but curious.  At this point it's more of a 10-15 second annoyance.  My machine radomly freezes in windows xp too.  Not sure if it's related.
    Thank you to anyone that can help or has ideas.
    Setup:
    3500+
    7800gtx msi
    samsung sata 7800 160g drive on first sata
    Maxtor ide on 1st IDE
    2 opticals on 2nd IDE
    1 gig corsair xms platinum

    Quote from: SAB on 02-August-05, 17:19:32
    LOL...or sometimes when O.C.'ing the CPU...SATA devices decide to take a vacation!!!!
    i don't have any SATA devices on my machine, but i still couldn't figure out why after i stoped using RAID and wanted to switch to a 2X160 GB non-RAID config, after BIOS post the screen would hang at detecting NV raid. took me 3 hours to find out that if the optimized settings were loaded, the trick would be to disable the aggresive memory timings from the cell menu. strangely enough, it worked with aggresive timings and the BIOS i had when i got the mobo (it didn't hang at detecting and configuring raid) but not with the new ones. and this was without any OC.

  • Bios Settings For MSI K8N Neo4/SLI Platinum MB

    Hello all...  Has anyone came up with the best and most stable bios settings for the MSI K8N Neo4/SLI Platinum motherboard yet.  Specifically under the CPU and Memory menus. 
    If anyone has seen any, please post them. or post a link.
    Thanks
    DaaDoctor

    Well that depends on the installed CPU and memory, doesnt it? So I find that question kinda odd.
    One thing though: Dont use Cool n Quiet. 

  • MSI K8N Neo4 SLI Platinum / HDD_LED Problem

    Hello,
    First off I would like to say that MSI boards rock! I've always been happy with them, in fact this is my fourth MSI board. The board is K8N Neo4 SLI Platinum.
    Unfortunately, I'm having a problem with this one. The problem is minor, but it shouldn't happen, at least I don't think. The problem is that even though the hard drive activity wire is properly connected to HDD_LED, it is not working with my SATA drive. No light at all!
    I read in newsgroups that there are people with this same problem (although not necessarily with this same board). I haven't found a solution to this yet. So my inquiry here is:
    1. Is there anyone else with this exact board with a SATA drive that can confirm his/her HDD_LED light is also not working with a SATA drive?
    2. Does MSI have a fix/solution for this?
    Thank you.

    Quote from: Jesteronyer6 on 23-July-05, 08:10:26
    THere is a positive and negative side on those pins have you tried flipping it over?
    This has got to be one of the biggest "pains in the a&&" in setting up a new mobo and connecting it to a new case...

  • Does k8n neo4/sli platinum support creative 6.1 surround speakers?

    I own an MSI k8n neo4/sli platinum mother board with an on-board SB live 24-bit sound chip. I have confirmed that the retail version of the sound blaster live 24-bit pci sound card will support a 6.1 speaker set up (specifically creative labs megaworks 650) with creative labs proprietary plug configuration of having front center, sub, and rear center speakers all on the same (orange) plug. The plug configuration on the back of the k8n neo4/sli platinum is color coded the same as the retail version of the sound blaster live 24-bit sound card. what I need to know is... Does the k8n neo4/sli platinum support a 6.1 surround sound speaker configuration? I can find no documentation in the literature confirming or denying this. FWIW... the creative sound card softwear that came with this motherboard will allow me to configure and test for 6.1 speakers... but I get no sound from my rear center speaker. On testing, the 5.1 speaker configuration works as it should but I am unable to test for 7.1 config as I lack a 7.1 speaker setup. I am using Version 5.12.1.356 of the creative drivers downloaded from the MSI driver support.
    Thanks for your time.
    Malpighi44
     

    Update...
     Last night I noticed that, in windows sounds and audio devices_advanced speaker settings, there is no 6.1 speaker configuration option. (GO to: control panel \sounds and audio devices \sounds and audio devices properties \ volume \speaker settings advanced \advanced audio properties \speakers \speaker setup pull down menu).
     I don't know if this pull down menu is generated by windows XP auto detection or the MSI/Creative drivers and .inf files that are installed for the SB 24-bit chip, but it leads me to believe that this MB does _not_ support 6.1 sound.
     Can anyone else confirm that this 6.1 speaker option is present or missing in windows with:
    1) This MB
    2) Windows XP in general
    or 3) if it is available to those that have an audigy or 6.1 compatible sound card
    Once again...
    Thanks for your time,
    Malpighi44
    My system:
    ANTEC SLK3000B ATX CASE
    ATHLON 64 3800+ NEWCASTLE
    MSI K8N NEO4 PLATINUM SLI
    OCZ PREMIER DDR PC3200 2X512MB
    2-MAXTOR MAXLINE III 250GB
    POWERCOLOR RADEON X800XL PCI-E 256MB VIVO
    ENERMAX EG495P-VE NOISETAKER 485W PS
    LITEON SOHW-1673S 16X8X16 DVD+RW
    LITEON SOHD-16T9S 16X DVD-ROM
    1.44MB 3.5IN FLOPPY
    WINDOWS XP PRO service pack 2

  • NOT Stable overclock on K8N Neo4 SLI Platinum 3.9 MOD + Venice 3000+

    Hi, to all the people that make this forum so usefull. 
    I´m wondering what i´m doing wrong? ??? ??? ???
    I have a Venice 3000+ E3 on a K8N Neo4 SLI Platinum and 1 Gb OCZ Rev2, TCCD.
    I have overclocked the CPU to 9 x 290 Mhz (2610Mhz) HTT 3X, MEM 1:1 290Mhz 2.5-4-3-10 1T 2.75V.
    Memory is ok at this setting on MEMTEST v1.65.
    I have tried Every VCORE possible to the CPU and Nforce Chipset and can´t make it stable.
    I can work on windows with this settings but some times the computer locks. >:(
    If any of you in the forum have a suggestion or recomendation, please Let me Know.
    For a list of complete hardware of my rig, look at the signature.
    Thank for all.
     

    I had this exact same problem, same RAM, same MOBO, with an X2 3800+.
    For some reason it wouldnt overclock 1:1, and that RAM at wouldnt run at 2.5-x-x-x-1T timings (and i dont think it did 2T stable for too long either). So i was limited to either 2 or 3.
    So right now I'm running my X2 at 2.55ghz and my OCZ Platinum 1gb TCCD @ 232(2-3-3-6-1T). Done so by using 183 divider at 255fsb. HTTmulti=3x
    Does dual prime 95 for 10-12 hours (havnt tried for longer)
    Oh also, for voltage, the RAM has 2.80-2.85, and NF4 gets 1.55-1.60v.

  • Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

    I just built this system yesterday..
    MSI K8N Neo4/SLI Plat with AMD X2 3800  latest BIOS 3.7 amd MB drivers
    I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
    WINXP SP2 latest stuff.
    DirectX 9.0C
    I have 2 512 DDR3500 Memory Sticks.   
    SATA 160 Hard Drive
    DVD 8X NEC Burner
    All 3d games lok it up.  3DMark2001 SE locks it up too.
    I ran Memtest and everything passed fine.
    Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
    Any help work be appriciated
    DaaDoctor

    Welcome to the forum DaaDoctor
    If you creat a signature (in profile) it will save you having to type your spec's  out each time or us looking for it. Use mine as a template.
    What PSU are you using ? Can you list the power output ? (writen on side of psu)
    Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
    Post the spec and we will know for sure.

  • Confused - whats the difference between K8N Neo4 SLI Platinum and Diamond??

    MSI web page says the Diamond has:
    "Silicon Image's SATA RAID supports another 2 SATA II ports. Transfer rate is up to 300MB/s."
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=638
    their Platinum page doesn't list the Silicone Image raid as a feature on the Platinum.
    I have K8N Neo4/SLI Platinum and it has the Silicone Image raid - I'm using it now. 
    Can anyone explain this? 
    Another question:  for both boards it shows:  "NV RAID (Software) - - RAID function available for ATA133 + SATA HD drives or 2 SATA HD"   
    How can the Raid fuction work for ATA133 drives since the cables for SATA and PATA are different?   What do the mean Raid for 133?
    Thanks!!!
    Tony

    https://forum-en.msi.com/index.php?board=36.0
    d/l a raid manual and all should be clear

  • MSI K8N Neo4/SLI SB Live! 24 bit CA 0

    Hello,
    I have the MSI K8N Neo4/SLI with SB li've! 24 bit sound card on-board and I want to buy a 5. speaker system with 3 digital input 3(2 optic / coaxial).
    The digital optic or the digital coax output from the sound card can make 5. output so i can receive with the 5. system
    The system is a Panasonic SC-HT5 (http://www2.panasonic.com/webapp/wcs...s&displayTab=S)
    Thank you.

    The card cannot create 5., so if the audio you're playing isn't already an encoded 5. (AC3) stream, then the card cannot change that. If you're playing DVDs, they should work fine provided everything is set up correctly (including the DVD software, it should be set to SPDIF/Bypass).
    Cat

  • Integrated SB Live 24 bit on K8N Neo4 SLI Plat and custom EAX

    I want to be able to create some custom EAX settings but I can't seem to find any way to do that on the SB Live 24 bit that's integrated on the K8N Neo4 SLI Plat board.  Is anyone able to do this or is it a limitation of the integrated SB Live 24 bit?  I hope it's not the latter...  Thanks.

    Hello, uninstall your sound drivers and go to creative site and get the lastest drivers with creative sound console, install both this sould work..  also clean out all the old sound drivers after uninstalling with driver cleaner. I think thats how i did it.    good luck henry9

  • MSI K8N NEO4 SLI PLATINUM Northbrigde fan faulty

    Hi, i have an MSI K8N NEO4 SLI PLATINUM mobo since it was released till now the northbridge fan gone faulty. It spin slow as if something causing it from spinning. Worst of all it makes a LOUD vacuum noise 'voooooooooooommm'. Anyway to fix this or to get it replaced? I still have warrenty for it. Thanks
    leon,
    London, United Kingdom

    Then there is a post here in the forum where some guys are talking about the replacement of that hsf and I think they did find one of some brand that I do not recall at the moment, but search here and you will find it...
    Be well....

  • K8N Neo4/SLI Bios Update for a Newbie

    This is the first MSI motherboard that I've bought and I love it. I've been wanting to upgrade to the latest bios, but I'm not entirely sure which one to get. I have the MSI K8N Neo4/SLI board, but when I go to the downloads section to get my bios update, I don't see my motherboard listed. I only see K8N Dimamond, K8N Platnium, and K8N SLI. http://www.msi.com.tw/program/support/bios/bos/spt_bos_list.php?kind=1&CHIP=Socket%20939%20(AMD%20K8)&ID=2 Which one of these would work on my motherboard, or would none work? If none of these work, where can I find one that will work?
    Also, how is this bios update applied? Is it applied in Windows or through a floppy disk? Are there any recommendations over one or the other?
    Any help in the matter is greatly appreciated. Thanks!

    If you fill out your specs in your sig, we can see what you have. You'll probably find your board at the US site here
    Also, no need to risk disaster in a bios flash if all is well. There are many stickys on this site re: flashing. It probably needs to be trimmed up a bit .
    There are three ways to flash the bios. One is somewhat risky (floppy), another safe (ramdrive), and the last can be unpredictable (LiveUpdate).
    I highly recommend the ramdrive or ntfs method as described here
    EDIT: another good item to have on hand before you try this is the BIOS SAVIOR
             This model fits my nf4 board

  • MSI Offers Free K8N Neo4 SLI Series

    MSI K8N Neo4 SLI Series Free Upgrade
    So 2x NVIDIA® GeForceT 7800  don't fit ???? or am I being cynical. Not sure about the X2 or afyer spending that lot U just desrve it  

    Quote from: Supershanks on 15-July-05, 13:06:58
    ChakkaSol,
    1) You mean u didn't write it down  
    It is strange because I usually write down everything...even the serial number for the amd winchester chip (cbbid0509)...oh well.
    Quote from: Glenn on 15-July-05, 18:04:08
    Well if you can't see the serial number, then yes. (I never write that crap down)
    No, you don't have to purchase anything, it's just the upgrade, looks like there might be more modifications needed that expected, for them to go to this trouble.
    NEVER send them anything other than the board, you won't get it back! I don't recommend sending the board wrapped as a present or whatever master plan you may be cooking. It should be in a motherboard box, with the antistatic bag. If you don't have another box, then the original will have to do. You can always go to a local shop and ask if they have an extra box, or make a custom one..
    Hey Glenn, you dont think they would appreciate it giftwrapped?      
    No but thanks for the info...cant I just put it in a UPS box inside an antistatic bag?  And Russ, I did keep the orginal box but for the life of me I cant find the label they talk about.  So I guess does it really matter if I send it back in the original box or just a box from my local UPS/Mailboxes store?

Maybe you are looking for