K8N Paltinum SLI no surround sound SPDIF not working

I have a K8N Paltinum SLI. The one with the onboard Soundblaster live! 24 bit.
I have this connected througt SPDIF and analog, but only my front speakers work.
I use the Cambridge Soundworks DDT 2500 which is an active decoder. (also from creative)
I have already flashed my BIOS updated my drivers.
I have the Antec Sonate casing which uses a Antec truepower 380W power supply which has -5v.
Can anybody help me??

Quote from: Zilver on 14-April-05, 06:41:58
Great Reply!! Thanks.
But i still think it is strange from creative to supply you with an audio test, that apparently doesn't send out a proper signal to support 5.1
Furthermore, besides the SPDIF there is also a black and green cable at the back of my DTT 2500 decoder. But these seem to have no sound at all running through them.
If Ii disconnect the SPDIF I have no sound. But if I unplugg the black and green cable this has no effect. Has my DDT 2500 become obsolete??
I had it attached to an older Soundblaster live, which had digital DIN, this worked great.
Is there some wat to get surround sound up and runner for more than just DVD?
Creative have a live! 24 card of their own, which probably has the multi-spdif jacksocket to support digital din. I don't believe creative are supplying speacial software to OEM's, so the test is included as it will work with thier own card.
Someone posted about a HDA MYSTIQUE card which supports "Dolby Live", but you have to import it yourself.

Similar Messages

5.1 Surround Sound speakers not working since 7.1 downloaded

I'm not sure what is causing it...But I cannot get my surround sound speakers working with ITunes since I down loaded 7.1. They all work with Windows media player. Is therre any setting I should be aware of?
Dell Dimension E510 Windows XP

I have the same problem and it is driving me crazy. I have an older logitech quadraphonic Z-560 speaker system that I love and have been using for years with never any problems, until I installed Itunes 7.
At first after the upgrade I was completely unable to play any file at all, which was later resolved by updating my SoundBlaster live Audigy card drivers. Now I can at least listen to music but only out of my front 2 speakers. I also noticed my QuickTime player does the same thing only playing out of the 2 front speakers. The issue only exists when trying to play audio through these 2 programs.
I have read all the posts on this issue that I could find yet have not been able to resolve it. I changed all the QuickTime, and creative settings appropriately for my hardware and no luck. I'm running the most current version of divers on windows XP with SP1.
Is it simply an incompatibility issue with my sound card?
PLEASE HELP with any advice!!!
Windows XP Pro

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Why iPhone 6 Plus sound microphone not working, but in the case of sound recordings in conversation mode work?

Sighhhh, wasted so much time yesterday and today going around Sony centre and then carphone warehouse. They told me to come back after Easter.
I came home, banged the phone against the wall and it worked.
Turned out that mic was working on loud speaker and when using headphones so I thought that the secondary mic is working and the main one (placed with the speakers) isn't. So I banged that part against the wall slightly (in plastic case to prevent scratches) then put the phone underwater, waited for it to dry and now it's working. Idk how well and if it's of perfect quality again but people can hear me well.

My sound does not work on my computer

Hey
I don't know if anyone can help me but my sound is not working on my computer. I went to my system preferences and when I click on output it says that the device has no output controls. I don't know why it is doing this. Can anyone help me to solve this problem?

See:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play
You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.

My sound does not work on my internal speakers

I used external speakers on Friday and unplugged them when finshed. Shut my computer down, and turned it on today and my sound does not work for anything

https://discussions.apple.com/message/7920938#7920938

Alerts sounds are not working after upgrading to iOS 7.1.2

Hi,
I've noticed that all the alerts sounds are not working anymore after upgrading my iPhone 4S to iOS 7.1.2
I’ve reviewed similar posts regarding the same issue; and it seems this is a common issue in iPhone 4S when upgrade to iOS 7.1.2.
Apple, please Advise if there anything I can do to resolve the issue especially that my work deepens on the push emails and alerts that requires prompt response.

I got this issue resolved.
It caused due to some dirt in the charger slot; such dirt caused the phone to assume as if it is connected to a car kit and that is why it does not produce any sound except the Ringer and the Alarm.
It has been fixed by cleaning the charger slot by toothbrush! with some
drops of a cleaner.
Do not do it by yourself, as it might be a risk; rather, let it to be done by an expert.

Sound is not working in apps.

Sound is not working in any of my apps. Sound switch is on, I hear alerts, alarms, calls, etc. Ideas?

Hi turnerCT,
Welcome to Apple Support Communities.
You may find the steps in this article helpful for troubleshooting the issue you've encountered:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
If these steps don't solve it, the advice in our iPhone Troubleshooting Assistant can help as well:
http://www.apple.com/support/iphone/assistant/phone/
Best,
Jeremy

My Pokerist app sound does not work, only with headphones....can anyone help me? Thank you

My Pokerist app sound does not work. It will only work if I have head phones on. All other sound works, songs, video etc. I deleted the app, then installed again still no sound. It is not the app because I also have a IPhone and the sound works on Pokerist. If anyone can help me I would appreciate it.
Thank you
Smartypants0

Check out this link - http://support.apple.com/kb/HT4085. There have been instances where settings have accidentally changed. Double click on the Home button, swipe all the way to the right to reveal the leftmost icon and alternate settings if necessary.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

Hi, I have an iPod touch 5th generation which i got about 10 months ago and now my sound is not working. for example my music isn't playing nor are any of my game sounds. Someone help please.

No sound form :
- Speaker?
- Headphones?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

[SOLVED] Sound (snd_hda_intel) not working after resume from suspend

Using the latest kernel 2.6.30.4, On HP2133, whenever I get back from resume, sound is not working.
Running the following brings back the sound, but that is obviously a hack:
fuser -k /dev/snd/*
rmmod snd_hda_intel
modprobe snd_hda_intel
/etc/rc.d/alsa start
I have on my /etc/modprobe/50-sound.conf:
options snd-hda-intel model=laptop
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
Here's the exact hardware specification:
# lspci -nnv|grep Audio
80:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] (rev 10)
Any idea where to look for this?
Last edited by yhager (2009-08-21 16:54:00)

[SOLVED]
I downgraded to kernel 2.6.29 and the problem is gone.
Note: I also had X VT problems with 2.6.30.4 (xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call). Those were solved too by downgrading to 2.6.29.

Transferred a video from phone to macbook pro but sound is not working.

I transferred a video from my phone to my macbook pro. the transfer was successful but the sound is not working on the computer, totally mute. the video is playing on quicktime player. the computer sound is on. the video was working fine on the phone and when i transferred the video, if this makes any difference or anything, the phone's media volume was on full.
I very much appreciate the help and feed back, thank you!

I have this same issue and have been struggling with it for a while. I really just need to get it into Apple Store to be fixed most likely - but avoiding the hassle and time needed to do so.
Things I've come across:
Something inside of the headphone jack is not right, such that it randomly thinks headphones or some other type of optical audio device are plugged in. you will see a red light inside the jack occasionally when it happens.
You might try doing PRAM and/or SMC reset ( http://support.apple.com/kb/HT3964 )

Sound is not working properly ? The volume button keeps saying sound effects when it's pressed .

Sound is not working at all now , when you press the volume button it says sound effects but nothing is happening

Hello Hartnett01,
Thank you for the details you provided regarding your audio issue you are experiencing on your iPad. I found a couple of resources that I think might help.
First, I recommend following steps in the following tutorial to address an issue like this (you can skip step 2 "Recharge iPad" because it's not related to this issue):
Frozen or unresponsive iPad
https://www.apple.com/support/ipad/assistant/ipad/
If the issue persists, I recommend reviewing this article next (the title of the article refers to an iPhone, but the steps still apply to an iPad):
iPhone: Can't hear through the receiver or speaker
http://support.apple.com/kb/TS1630
Thank you for using Apple Support Communities.
Best,
Sheila M.

Sound is not working for my TV Shows

My sound is not working for just my TV Shows. Sound for the music is just fine. I would appreciate any help given. Thanks!

If you go back 4 pages you'll find a lot of responses about the same problem. Towards the bottom of this link to that page, Lex came up with a band-aid for the problem until iTunes gets it fixed. Lex's fix worked for me and some others. Since I did as he suggested, I have downloaded two movies and put them over to my iPod. I can also see them on my computer screen and hear them too.
Possible Temp Help

Sound blaster not working correctly?

Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, Robert

Well, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8)

Sound does not work in Photoshop Album PDF

I have a 5 yr old pdf made with Photoshop Album 2. The sound does not work and also an attached video does not play (only shows as a still image). This pdf used to work perfectly when I got it but since of course I have change computer, os and acrobat versions many times. I think it worked fine when using Windows XP, don't know which version of Acrobat Reader. Currently running Windoiws7 and Reader 9.3
I got this sent to me so I only have the pdf, no original files etc.
Anybody know how to get this working?
Thanks

I have a 5 yr old pdf made with Photoshop Album 2. The sound does not work and also an attached video does not play (only shows as a still image). This pdf used to work perfectly when I got it but since of course I have change computer, os and acrobat versions many times. I think it worked fine when using Windows XP, don't know which version of Acrobat Reader. Currently running Windoiws7 and Reader 9.3
I got this sent to me so I only have the pdf, no original files etc.
Anybody know how to get this working?
Thanks

K8N Paltinum SLI no surround sound SPDIF not working

Similar Messages

Maybe you are looking for