K8N Platinum Audio recording issue

I’m encountering what I believe are on-board sound issues. I wanted to back up and restore several old cassettes and some VHS tapes. Initially I tried the cassettes using the cassette player from my Sony system with an audio cable (R/L cable to single pin”MicIn”); used Acoustica Spin It Again and sound was distorted – played around a bit w/nVidia Mixer to no avail and retired the issue for a while. This week I purchased the VisionTek card referenced in my sig– good TV video and audio reception via RCA cable to card’s “antennae in”; however, when I attached my VHS player via the same RCA “antennae in” on the card, the audio was garbled just as with the cassette recording – video was fine. Both cassette and VHS audio volume is very low, requiring speakers to be max’d – possible source of distortion? Would appreciate any thoughts on either issue but feel they’re both related; puzzling thing is why TV audio has no issues as is using mobo audio as well. “nvmixer” shows codec is: Realtek ALC850 w/capability of “single AC’97; 8 channel”. And driver version = 4.62 (6.14.0462.0). Thanks.

LarryAllen, As well as the various settings in the nVmixer for speaker jacks, sound levels, etc there is also the settings in windows "sound properties" - from the "speaker" icon in the task bar. In the first example that you used [the sony system] I wouls say that it was wrong to go into the "mic" jack - should be in the "line in" jack. The "mic" jack is way more sensitive than a line in so if your output from the "sony" was indeed a line out then it would overwelm the "mic" input leaving you with garbled sound.

Similar Messages

Audio recording issues

Hi,
For language teaching purposes, we've developed a flash media
server based app which allows users to record audio. It works well,
but at times (actually often) there is a drop in the audio
recording which can last several seconds. We think it could be a
network issue, as it appears to be more salient in some areas or
campus than others, but we're still within the university network
itself so I'm thinking there might be a setting to change or
something we might not be doing well.
thanks in advance for any help!!
Emmanuel

Sounds like you're listening to the same source (the X6) being played twice.
Could be you are hearing MIDI thru playback as well as Logic's "Software Monitoring" you must also be enabling a MIDI track for recording. If you unhook the MIDI connection from the X6 does the hollow sound go away.
What Audio interface are you using? The other possibility is your Audio Interface has "Direct Monitoring" this allows you to monitor the audio inputs before it goes into the computer. Having Logic's Software Monitoring enable along with Direct Monitoring would also produce the hollow sound.
I suggest the thorough reading of the manual so you understand what all the preferences do. Most of the time it is better to read and understand/experiment on your own. It's one thing to be shown something another to figure it out for yourself.
Here's a Link to all of the Preferences/Audio settings.
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

HP Pavillion dv6 notebook audio recording issue! (windows 7, 64bit)

Hello! This is my first post here, as this is my first issue with this computer. My microphones won't pick up any sound- this computer has two different ones, an integrated one and an outer one, and yet neither work. Troubleshooting only picks up whether they're enabled or not, and I've tried recording after enabling them and disabling them, restarting, etc. I've checked with Beats Audio and they're turned on there as well, and the drivers say they are up to date. Yet nothing is working, when I used to voice recognition test it wouldn't even pick up any outside audio.
I should note that the webcam doesn't work as well, because when I bought it, it would disconnect the internal camera often, and when trying to fix it, someone uninstalled the driver or something - though at the time, audio still recorded just fine and I didn't need the webcam.
IDT High Definition Audio CODEC
Intel(R) Display Audio
If any other information is needed, please let me know! Thanks for everything.

Hello katrapezo. I understand you're having some trouble recording audio.
Have you tried recording in another application such as Sound Recorder?
I'd also like you to remove your audio drivers and allow Windows to reinstall them. Here are the steps.
Click Start, type "Device Manager," and press Enter.
Expand the "Sound, video, and game controllers" section.
Right click on your sound card and select "Uninstall."
Reboot your computer.
Verify whether the problem persists.
Also, what is your notebook's product number? This document can show you where it is located.
Have a wonderful day.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Bizarre audio recording issue

My iMac has lately been behaving rather strangely in regards to recording or otherwise doing anything meaningful using input audio with concurrent video. When I try to do a video chat in iChat AV, no sound ever makes its way to the person I'm chatting with. Audio chats go off without a hitch however.
Another example...When using my Canopus ADVC110 to import video using iMovie, sound can be heard when previewing/playing the camera source in iMovie. But when I try to record a clip and then play it back, there's no audio at all. Recording audio in GarageBand using the iMac's built-in mic works fine.
Since this is happening using different audio sources, I think it's safe to say it's an issue with the OS. More specifically, it seems to be a problem with my user account on this machine as none of this happens when I log in as a different user.
So does anybody have any ideas on how I can iron this out? Thanks for any help you can provide!!
Details:
2 GHz Intel Core Duo 20" iMac.
2 GB RAM. 256 MB VRAM.
plenty of available hard disk space.
All relevant software is up to date (OS X, iLife '06, iChat AV).
20" intel imac Mac OS X (10.4.8)

Sanjay_Ideavate wrote:
..I am novice to jmf. Yet you are posting in Java Sound. JMF has its own [JMF forum|http://forums.sun.com/forum.jspa?forumID=28]. BTW - are you also a novice to Java Sound?
..I am recording audio and saving it into .wav file.That does not require the JMF. It could be done in the core J2SE since Java 1.3, using Java Sound.
How can I show a control that fluctuates according to input audio intensity. Your best bet would be to show the RMS volume on a JProgressBar (or two of them, for stereo).

DV7-3080 US Win 7 Audio Recording Issue

This is a Windows 7 64 bit machine, with which I am trying to record streaming audio. In addition to the Windows Sound Applets in Control Panel, I also have an IDT audio control panel.
When trying to record streaming audio using Nero or MP3MYMP3, the integrated microphones on the computer remain on and I cannot find a way to turn them off. In addition, the actual streaming audio is not being recorded by either application.
Is this an issue with settings, this particular computer hardware or Windows support?

IPad audio recording issue

I have a speech class where we use our iPads to record and analyze our speech delivery with. My first two recording weren't an issue, but for my most recent one there is no audio - only visual. Any reason why? Suggestions? Nothing was done differently this time around.

Thank you for the response. I tried that and it still doesn't work. I don't understand why an individual recording won't work and the others will. Unless the professor who set up the iPad somehow messed with the setting...I have no clue.

K8N Platinum - SATA RAID issue

Hey there everyone, I have recently decided to reinstall XP on my system and I require the drivers that were included on the two floppy disks that came with my Mobo. I have recently moved houses and lost both of the disks in the process. I have tried a variety of drivers from the internet but to no prevail. I cannot remember what the disks were labeled as but Im hoping somebody out there has them!

read Moan Guide
do you mean K8N Neo Platinum board? if yes you can find drivers which you need here:
http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=574
if no be more specific for the exact mainboard model.

Audio Recording Issue

Hi,
I am novice to jmf. I am recording audio and saving it into .wav file.
How can I show a control that fluctuates according to input audio intensity.
Thanks
Sanjay Ujjainkar

Sanjay_Ideavate wrote:
..I am novice to jmf. Yet you are posting in Java Sound. JMF has its own [JMF forum|http://forums.sun.com/forum.jspa?forumID=28]. BTW - are you also a novice to Java Sound?
..I am recording audio and saving it into .wav file.That does not require the JMF. It could be done in the core J2SE since Java 1.3, using Java Sound.
How can I show a control that fluctuates according to input audio intensity. Your best bet would be to show the RMS volume on a JProgressBar (or two of them, for stereo).

Mac audio recording issue

Hi,
We have an ActionScript 2.0 recording program that connects to Flash Media Server 2 and records camera and mic input.
On Windows PCs we have no problems. But for videos recorded by some Mac users, the audio seems to drop out for a few seconds at a time, several times during recordings that are about 90 seconds long.
We're trying to work out why this is happening and whether anything can be done. It affects users on the latest version of Flash Player, as well as older versions.
Our ActionScript code sets the mic sample rate to 22kHz.
Thanks for your time,
Ajay

We're looking into whether using an external mic as opposed to a built-in one will help. I'll post any useful findings here.
Does any have more concrete info about that?
Thanks,
Ajay

L305SD-S5874 Audio recording issues to USB Audio Interface

I am hearing snaps and pops recording audio through a USB audio interface attached to my laptop.I am using an external Hard Disk connected to a card buss e sata interface. Audio plays fine but snaps and pops are heard when
recording or even when an input channel is selected but idle.I have the latest drivers installed.People in other forums are saying that these problems are due to my using a " cheap" laptop with poor IRQ sharing implementation in the chipset.Is anyone using a similar computer this way with no problems ? I have recorded audio for years to much less powered computers with good results.

Sounds like you're listening to the same source (the X6) being played twice.
Could be you are hearing MIDI thru playback as well as Logic's "Software Monitoring" you must also be enabling a MIDI track for recording. If you unhook the MIDI connection from the X6 does the hollow sound go away.
What Audio interface are you using? The other possibility is your Audio Interface has "Direct Monitoring" this allows you to monitor the audio inputs before it goes into the computer. Having Logic's Software Monitoring enable along with Direct Monitoring would also produce the hollow sound.
I suggest the thorough reading of the manual so you understand what all the preferences do. Most of the time it is better to read and understand/experiment on your own. It's one thing to be shown something another to figure it out for yourself.
Here's a Link to all of the Preferences/Audio settings.
http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5

10.0.6 solved my M-Audio recording issue! Pass it on!

Get the update for Logic Pro X now! I'm a happy chappy again...

This comes up pretty regularly. The most common cause is that there is a folder at the root level of the drive with a name like Private or Video or DCIM or something that makes the application believe it's a camera drive.

MSI Neo2 K8N Platinum - Freezing Issue during games

First off greetings to everyone on these forums...
I purchased the MSI Neo2 K8N Platinum motherboard from NewEgg back at the end of March to compliment the AMD 64 "Winchester" processor that I also purchased at that time to replace a slightly older AMD XP "Barton" system that was using the Abit NF7-S motherboard. For the past month I have been fighting an unusual and highly irritating issue that I have noticed during game play and have tried everything that I know of and more in an attempt to remedy this issue, but to no avail. This is the general background of the situation and now I will descibe in greater detail as to what this issue I am referring to is and the symptoms of this issue and some of the various methods used to remedy this issue.
The issue is that while play a game the system experiences a short 5-10 second freeze during the game randomly, but usually several times an hour. During this freezing the sound would loop and as suddenly as the freeze occurs it would cease and the game would continue on as if nothing happened. However, sometimes this would result in the system freezing outright after this short 5-10 second freeze... but it does not feel like a total system freeze, but rather a video freeze as the sound continues and I still have keyboard control... but this does require me to force a manual reboot of the machine itself. I have scowered the internet and various forums in an attempt to find what the issue was and use various methods to remedy this issue, but so far nothing has worked in my favor... but it does seem like this issue has been plaguing other users with the MSI Neo2 Platinum motherboard. Below are some of the methods that I have used in an attempt to solve this issue:
*Default Clock for CPU/Memory/GPU; Over/Under Clock for CPU/Memory/GPU
*Increased voltages to CPU VID, AGP, and Memory
*Disabled/Enabled AGP Fast Writes
*Increased AGP Aperture from 64MB to 512MB
*Enabled/Disabled ATI/nVidia Speedup option in BIOS
*Forced AGP clock lock to 66-67mhz
*Relaxed/Aggressive memory timings
*APIC enabled/disabled
*Gate A20 turbo/normal
*Disabled all unneeded onboard components (Realtek NIC, Sound, SATA)
*Disabled nVidia MAC and attempted to use 3Com Gigabit PCI card instead
*Swapped HDD Cables
*Tried PCI Sound Card (SB Audigy2 ZS Gamer) in PCI Slots 3/4
*Tried video drivers from 71.89 Official to 76.45 beta modified drivers
*Tried 5.10 official nForce drivers to remixed 7.02 nForce drivers (5.10 drivers uses 4.36 GART, higher drivers uses the 4.40 GART)
*Applied all the latest updates from Windows Update Website
*Reinstalled Operating System (Windows XP SP2) 5 different times clean with various settings (APIC on/off, etc...) and different drivers.
*Installed Audio Card (SB Audigy2 ZS Gamer) with older and the latest drivers available from Creative's website
*Replaced PSU (Previously was a Thermaltake 420watt PSU, 18A +12v) with a OCZ Modstream 520watt PSU (28A +12v)
*Video card is KNOWN working from previous build (AMD XP 3000, Abit NF7-S)
*Hard Drive is KNOWN working from previous build
*CD/DVD-ROM drive is kNOWN working from previous build
*Heat is not an issue... all components temperature is well below rated level, the only unknown is the chipset temperature (it has a active heatsink and seems to not be hot to the touch, applied AS5 to it anyway)
*Used latency tweak to the video card
*Used Rivatuner to force constant performance level
*Tweaked BIOS to force even clock rates and forced 1.4v to the GPU Core
*Used original GPU BIOS
*Used MSI Neo2 K8N Bios 1.4 - 1.8 and modified BIOS 1.8
*No background applications are running (not even antivirus)
*Used application to force maximum refresh rates for my monitor
*Memory passed MemTest86+ for over 24 hours
*System passed Prime95 and SuperPi for over 24 hours
*System seems stable in all non gaming related applications
*Checked through various troubleshooting procedures
*Disabled SBDRVDET.EXE using MSCONFIG
*There are no IRQ conflicts outside of PCI system management sharing IRQ11 with the NIC and USB... in APIC there are no IRQ conflicts what so ever. Regardless neither method worked
*Installed AMD 64 drivers from AMD
*Disabled DEP in boot.ini
*...and many other various tweaks and modifications.
System Specifications
CPU - AMD 64 3200+ "Winchester", using Thermaltake Silentboost K8 and AS5
Motherboard - MSI Neo2 K8N Platinum (nForce3 250GB Ultra) - Using Bios version 1.8
Memory - 2X 512MB Corsair XMS TwinX1024-3200C2PT (2 Modules, Memory Slots 1 and 2 used)
Audio - Sound Blaster Audigy2 ZS (PCI Slot 3 used)
NIC - Onboard nVidia MAC, Disabled Realtek NIC
Video - XFX Geforce 6800NU 128MB AGP (BIOS Rev 1) - NV Silencer 5 and AS5
Case - Thermaltake Damier Series 5000
PSU - OCZ Modstream 520watt (28A +12v rail)
HDD - Western Digital 1200JB 7200rpm IDE
DVD-ROM - Lite-On 16X DVD-ROM
Floppy - Mitsumi 1.44MB 3.25"
OS - Windows XP SP2/DirectX 9c
I have been fighting this issue for well over a month now and I am frankly nearly out of ideas, this does not necessarly prevent me from playing games, but this does interfere with the games I do play (especially online games). I do demand absolute stability from the games that I play and this issue only began AFTER I upgraded to the new motherboard, processor, and memory. The only thing I have not tried is something that I do not have access in attempting on this motherboard, and that is increasing the voltage to the chipset.
Here is my theory on what is going on is that I believe is there is a fault with the chipset on this motherboard and this is manifesting itself while I am playing various games on this system. Of course I would like to try increasing the voltage to the chipset as that would increase stability, but there is no option in BIOS to increase the chipset voltage like the previous motherboard I had (Abit NF7-S). It is possible that either a) the chipset is at fault and is causing me this issue or b) the chipset is not recieving enough voltage.
My question to the rest of you is this, what do you think the problem is and what ideas do you have that I may try that I have not tried yet. Additionally if there is nothing else that I may try should I attempt to RMA this motherboard and will that help, and is there any other versions of this motherboard that I should be aware of. I would appreciate any response from a MSI representative and any comments from those that may have positive suggestions for my issue. Thank you in advance for your time and any help that you may be able to render.
The GameMaster...
*EDIT* Added additional methods attempted... (there was a lot... so I did not remember everything that I have tried)

Quote from: dacull on 25-May-05, 16:06:33
Does it only happen in online games, or can it happen in all games? One thing to make sure of is to turn off CRC checksum offload in your NVidia MAC properties (everyone do this, it is incorrectly calculating checksums which leads to servers ignoring your packets). However as you have tried a different network card you can discount this theory.
For me it looks like the biggest culrpit is your 6800NU, i have read alot of bad things about the NU and you have a low bios revision there, just because it worked well against your old chipset doesnt mean it will work well against your current chipset. Sounds like a BIOS fix is needed as some timing is out somewhere.
Ensure Spread Spectrum is off (and as you have already pointed out Fast writes, ATI NV Speedup) and your card is running at default clock.
As a test beg/borrow/steal another graphics card (preferably nvidia) and see how it goes so you can narrow in on your video card.
It is not just one game, but it is more prodominate in certain games than others... the game in question here is Planetside... though I stuck a demo of Unreal Tournament 2004 on a loop bot match and it seemed to have locked up after 4 hours (not sure how many times it experienced that 5-10 freeze as I went to bed). As for the video card it was KNOWN working from a previous build in those same games (Previous build was a AMDXP3000 and a Abit NF7-S nForce2 motherboard). The only components different in this build is the AMD64, the MSI Neo2 K8N, 2 new sticks of Corsair XMS to replace the Corsair ValueSelects, and the SB Audigy2 as I would never use a software codec audio solution. Spread Spectrum is LOCKED in BIOS and disabled... ATI/nVidia speed up was disabled from the start... and I tried the Video Card at default clock, over clocked, as well as under clocked and the same issue resulted... as I said before it is NOT the video card.
There are two other things I could try is use my old Geforce4ti 4200 and see what happens... or even try out WindowsXP 64-bit edition as someone earlier suggested. I wish I could find a new BIOS for my XFX 6800NU, but there there is only the revision 1 BIOS that I was able to find. The mystery continues...
The GameMaster...

Video recording issues (it jumps and the audio sto...

Dear Support team,
I was very satisfied with my phone for a couple of months but nowadays I've an annoying issue with the video recordings of my Nokia Lumia 920. I've noticed in the past few weeks that there's a "bleep" or a "jump" in each video I take. (Nokia Camera software, Lumia Black, RM-821_eu_hungary_434)
It's very dissapointing because every video is let's say faulty at some point of the video.
For example please take a look at the following video at 0:34 where not just the video "jumps" but the audio recording also stops for a couple of seconds:
https://www.youtube.com/watch?v=xD9R2x5Kx4c
The interesting thing is that during the next 21 minutes it did not make any mistakes while recording.
Please take a look at an another example at 3:31:
https://www.youtube.com/watch?v=hYQ5vNY-BUw
If you're interested in debugging the issue I can send you somehow (by FTP or so) the original files as well.
I have got more videos which are like this and it was shown like this on the phone's screen as well so I've ruled out the possibility to have an issue while transfering it to my PC.
I'm assuming that possibly there's something wrong with the Lumia 920's RAM memory or with the 32GB internal storage drive, e.g.: let's say bad sector like on hard drives.
The phone recently had it's first freezing while I was reading my facebook the phone suddenly went black and restarted.
I still have 1,5 year warranty on my phone but I've bought ~150 km far away so I hopeI won't need to travel there and wait for weeks and to travel there again to get my phone back! What do you suggest?
Is it possible that it's rather a software issue not a hardware? Or should I return my phone to the retail shop or is there any downloadable software patch to correct this issue? Is this a known issue to you?
I've noticed one more thing: when I'm using my phone for e.g. like 10 minutes it's back cover gets warmer and warmer somewhere around the camera; I thought first it's because of the higher processor and battery usage but I don't think it's normal. The "heat issue" is also present while playing with a game.
Info: my battery lasts for 1,5 day or so by very moderate usage, is it normal? (4 times a day wifi for 5-10 minutes, max. 1 pcs one minute call per day)
Thanks for your help in advance,
Best Regards
Richárd Márk NAGY

Hi All,
I'm shocked about this device as you know I was disappointed due to the video recording glitches previously, but what yesterday happened is the worst I could ever imagine: I've recorded 3 videos and from this 3 videos 2 are unplayable even on my phone and on my PC, it gives an error message: "The video failed to play".
The 2 files can't be seen in the camera roll only by using Pocket File Manager.
I was able to copy all files to my computer:
WP_20140802_21_16_58_Pro.mp4 - 661 203 084 bytes - playable
WP_20140802_21_22_19_Pro.mp4 - 3939 658 131 bytes - unplayable
WP_20140802_22_13_59_Pro.mp4 - 3235 991 965 bytes - unplayable
To me these 2 videos are really very important, please help me to recover them! Please tell me, how you want me to send the files as they're, ~4GB each, by using Onedrive or how?
If this issue won't be solved I'm considering NOT TO BUY a Nokia again! Can it be a hardware related issue, e.g. faulty internal flash? Should I return the phone to the retail shop?
Regards
Richard Mark NAGY

K8N Platinum Video and S-ATA issues

hey,
here is my problem: i bought some hardware 3 weeks ago, including:
A64 3800+ (Venice), MSI K8N Neo4 Platinum (MS-7125), Leadtek PX6800 GT TDH (265MB), Be Quiet! 450 Watt Titanium S1.3
in exchange for my old system (2500+, Abit K7N, ATi Radeon 9800SE AiW, 320W Enermax PSU)
the hardware change went great, had no errors after the exchange, windows xp (sp2) worked for 2 weeks. though, some things are errorous like the nForce eth being detected but no drivers installed, nForce raid not being detected - stuff like that probably resulting from a missing format c: and really clean install.
now things get quite strange. a friend of mine gave me 2 of his s-ata hdds (both maxtor, one 160gb and the other 200gb) - after plugging them onto the nforce s-ata raid, i was still able to get into the bios (at this time it was the biosversion the board shipped with) but the keyboard was locked (or the pc froze after entering the bios - can't tell for sure). unplugged the drives - and it was working again.
let's get to the main problem. after the problems above i thought "well, ok, let's reset the cmos, maybe i configured it wrong" so i shut down my pc and pushed the "clear cmos" button - then i did a normal boot, i heared the "beep", everything was just fine - but my TFT stayed black. i had a similar situation on my old board, so i disconnected the psu and removed the battery for 10 seconds. boot: display worked again. i immediately checked my bios (which was indeed resetted) but did not change anything. reboot -> black screen. now, the funny thing is.. the gfx card got 2 dvi and 1 s-video output (one dvi and s-video were connected) so i checked my tv - guess what, i saw the POST now i knew the board was "working" and my assumptions of which the black screen results in a crashed videocard/mobo were wrong. i sat there and watched windows xp boot up - and suddenly (after the xp vga drivers have been loaded i guess) my tft displays the image!
now this is VERY odd and tbh i really don't know what to say. anyways, i started msi liveupdate and downloaded/installed the latest official bios update (via winflash because i don't have a floppy anymore) to see if that might fix something. it didn't.
and now here i am, desperate and confused because i don't know whether or not it's a mobo or gfx issue - all i know is that it suddenly appeared after the cmos clear (sadly there's no "description" of whether you should press that button when the pc is shut off, psu is disconnected, mobo is running its post whatever) and i can't find a logical reason for this behaviour
to add another detail to the story, after i found out the video output was sent via s-video, i tried all combinations (dvi1 connected, dvi2 not, s-video not / dvi1 not, dvi2 connected, s-video not / dvi1 + 2 not, s-video connected / etc.) but the only source i can get the post from (until WinXP loads) is the s-video out.
i think maybe it could be the gfx card's bios, which loads up BEFORE the post begins (leadtek welcome screen, ram counts itself -> post -> os) but i'm not sure about it either
ANY help is very appreciated
*edit* i forgot to mention: it worked before! after hitting this nifty little button, the display problems began...

Quote from: Supershanks on 03-June-05, 20:24:49
Hi llamalein,
Welcome to the forum.
thx
Quote
1) Your monitor issue is not uncommon see Syar's post hereWon't boot, please help.
thanks, i'll try it as soon as i'm at home though i'm quite sure it wont work
Quote
3) Exactly which K8N Platinum have you I know it's a 939 but Neo4(7 versions) or neo2(2-4 versions)
yarr, i am so worried i already forget to post the right specs it's the K8N Neo4 Platinum (MS-7125) (as described here
Quote
4) Please post your full specs - we don't know what your OS is currently running on what optical drives - look arounf the forum for the format. also include the amps on the 3.3v,5v,12v rails for your power supplyu.
PSU data (as supplied by the manufacturer):
# 3,3V: 28A
# 5V: 45A
# 12V: 22A
# -5V:: 0.8A
# -12V:: 1.0A
# 5Vsb:: 2.5A
HDDs:
ide1m - Samsung SP1614N
ide1s - Samsung SP1614N
ide2m - Plextor DVD Burner
IDE Controller:
ide3m - Samsung SP1614N
ide3s - Some old Western Digital HDD (80/7200)
(m = master, s = slave)
WXPP is located on ide1m

LE8 won't remember audio recording path (among other issues...)

Why won't LE8 remember the audio recording path I set for each project? Each time I open a project I've been working on (by dropping the project onto the LE8 icon in the dock-LAME) and arm a track to record, it says that that the path to the external HD is not found (-but it knows the name of the external HD somehow). I'll then open the record prefs, set the recording path correctly to my external HD and the coressponding folder, save the project, and record without incident (or at least the same incident) for the rest of my session. The next time I open the project the same thing happens.
LE7 never had this issue.... weird and annoying.

For generic performance and trouble-shooting advice I’d like to recommend reading these:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
As for the specifics:
The image size is 4.31M. If I go to double the size and change nothing else, the image size jumps up to a whopping 17.2M.
If you double the dimensions of an image the area is increased fourfold – so what is the problem there?
The image dimensions are 500px x 135px, 300DPI, 8bit, RGB color. This is at 100% zoom. Those are the settings I normally use, but for some reason it’s showing the file as about half of the size it should be. (Tumblr post for comparison—they are 500px wide.)
The introduction or Retina (and other high resolution) displays and browsers actually up-scaling images to accommodate those screen resolutions seems to have confused some users about the concept of pixels.
Could you please post a full size screenshot on this Forum of the image at View > 100% in Photoshop and on tumblr?

K8N Platinum Audio recording issue

Similar Messages

Maybe you are looking for