K8N SLI Issue - USB Mass Storage Issue

New install.  I have an issue with the USB Mass Storage device on my Canon printer.
When the machine boots, it pauses just on bootup for about 5 minutes.  Pauses right after displaying the CPU information.
It eventually boots up into windows, but shows a yellow exclamation mark on 'USB Mass Storage Device'.  I have tried uninstalling the printer drivers and reinstalling with no luck.  If I pull the USB printer plug and then boot, I have no issues.
I've upgraded to the newest bios.  I feel like even if I could fix the Windows driver issue, it might not help since the main pause is in the Bios startup...
Any ideas?

hi Zepp,
Welcome to the forum
Most common issue with usb is front case USB lead. if you have a lead connected to jusb1 or jusb2 on the mobo disconnect it & see if u still have issues. The reason is shown if your front usb does NOT work with your k7n2 board read this you'll see from the title it's not just the neo4
Have you a usb memory stick or anything else plugged in.
luck

Similar Messages

  • K8N SLi Platinum USB keyboard boot issues

    Hello, I have a K8N SLi Platinum connected via an Aten US221 USB switch (http://www.aten-usa.com/?product&cat=804&Item=US221) and a Kensington USB hub to a Logitech MX518 mouse and a Logitech multimedia pro keyboard. I use this to connect the same two input devices to two computers and toggle. Previously I used a keyboard to each, with a Dell PS/2 used on the MSI motherboard.
    The problem is that the MSI motherboard fails to detect the keyboard every other boot or so. It doesn't matter if I unplug the Aten switch, the USB hub or even connect it directly to the USB root hub. The only thing that solves it to restart the MSI computer over and over until it decides to start working. And I need the keyboard since I have a bootloader (GRUB) that I select which OS to boot with. The switch and keyboard works without a hitch on an older Dell computer which is also connected in tandem.
    Since I need both mouse and keyboard on a single wire I cannot use a USB-to-PS/2 connector. I've found several posts here which suggests this motherboard is buggy, if that's the case shouldn't MSI issue some sort of BIOS patch?
    Sincerely, Martin "xarragon" Persson

    Might work.
    I don't like the inconsistency you describe: working sometimes and after a lot of reboots. Would you say your system parts, please. Troubleshooting this in your end must include finding a situation where it never works, and when it always work. For example, if you don't have the mouse connected at all, if you don't use the hub, etc.
    Not saying motherboards can't be damaged, specially port end, but the hub thing is a more likely culprit.

  • Blackberry Z10 USB Mass Storage issues

    My Blackberry Z10 doesnt show up on my PC as a Mass Storage Device, and if I go into the settings on the phone the setting to turn it on only applies to the SD card. I have Blackberry Link on my PC installed, but putting movies and videos onto the Z10 this way is so much harder than simply dragging and dropping if it simply popped up as a drive on my laptop. Ive read the manual online and seen that my Z10 should pop up as a Drive on my computer, one drive for SD card and one for the main storage, so where am i going wrong, why cant i find this drive on my computer. One point to note was that before i installed Blackberry link, the first time i plugged the phone into my laptop it popped up as a drive on my laptop with links to download Blackberry, but i dont think it was the real drive, now i cant get the drive anywhere, it doesnt come up when i plug the phone in or if i click computer it isnt in the list of drives. HELP would be much appreicated! Thanks

    Hi,
    "Overview:
    "Shared network drives do not appear when attempting to access a shared network drive using the File Manager application on the BlackBerry 10 device.
    Cause:
    "There are 3 possible causes for this issue, and these are as follows:
    The BlackBerry 10 device is not currently enrolled​ on a BlackBerry Enterprise Service 10 server.
    The shared network drives have not been configured​ in the BlackBerry Work Drives application.
    The File Manager is being accessed from the person​al perimeter instead of the work perimeter.
    Let me know your thoughts  on this one.
    Thanks,
    Bifocals
    B33581 A network share set up using BlackBerry Work Drives does not appear in the File Manager on a BlackBerry 10 smartphone
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • LG Spectrum - Issue w/ USB Mass Storage funcionality

    I just got this phone a few days ago and I am trying to play the music that I have stored on my phones memory card through my car stereo by plugging it in the USB port in my car. When I try to do this, the screen on my phone just flashes back and forth from the charging home screen to the regular home screen and it (my car stereo) says reading error. Prior to getting the LG SPectrum I had an HTC Evo on Sprint and it used to work whenever I plugged my phone into my cars USB port. Is there a setting I need to change in my phone or is this phone just not compatible w/ car stereos? This may be a question that I need to ask my car manufacturer but I figured I would start here for some advice.
    On another note, I am also wondering if this phone has an indicator light. I have been looking ever since I got this phone but can't seem to find it anywhere. All I see on it is the front camera and a motion sensor. Am I missing something?

    Yes I have tried that but it still gives me the same result. Itis a little disappointing that I can't get it to work like my Evo did. I never had the need for an iPod b/c my phone always did what I needed as far as music goes. So is am is it safe to assume that it won't be possible to play my music on my phone through my car stereo? Any way it could work through bluetooth? I am somewhat disappointed w/ some of the other features of this phone (especially not having a notification light) but I could get past that but not having the ability to have the USB mass storage capability is a huge let down.

  • Asha 501- usb mass storage connectivity issues.

    hey guys, I've just connected my phone to an android tab using usb mode. 1st thing is it didn't detect my phone as mass storage. 2nd thing is after unplugging my phone, all the content in my memory card seems to be scrambled, everything looks in different language/characters. Not sure what to do apart from reformatting the memory card. Any suggestions...
    I tried restarting the phone, reinserted the memory card. All info on memory card is scrambled.
    Any help would be appreciated.
    Thanks in advance.

    Interestingly this just published today but not familiar with Asha 501 USB connectivity behaviour other than as a Windows USB mass storage device: http://conversations.nokia.com/2013/08/05/nokia-asha-501-how-to-add-music/
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

    I am having issues with Mass Storage after upgrading my 8130 to V4.5.  I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device.  It is not my media card.  I still have my old blackberry: the card shows up on both phones and computers.  It is not my cables as they work with my old phone.  I have also done all the obvious things like pull the battery and play with the media card setting
    This guy had the same issue though i never saw resolution:
    Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
    Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
    "On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
    The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
    After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
    Hopefully someone whose genius far exceeds mine will help me with this.  Thank You.

    I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
    Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
    Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
    Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
    Forgot to mention - now I have the OS 4.5.0.127
    Michael.
    Message Edited by djm132 on 04-09-2009 01:01 PM

  • Access USB mass storage dev on Netra 20

    HI all,
    We just got a Netra20 server for our lab and noticed the USB support it provides. I plugged a 128 Mb USB JumpDrive but have been unable to access it. I found some docs in docs.sun.com related to the topic where it instructs to do an eject -n (to see the device-alias available) however all I see from the output is Floppy and CDROM aliases, no generic usb alias. Also tried killing and restarting "vold" but no use.
    Does anyone know what is the proper procedure to access it? BTW I am running Solaris 8. Is USB supported in Solaris 5.8?

    USB is supported in Solaris 8 / SunOS 5.8. This includes usb devices that implement the USB mass storage
    specification.
    You may want to install the latest USB Framework patch 109896-21, it fixes several issues with usb mass
    storage devices, and even adds USB 2.0 support.
    But: The "Lexar (?) JumpDrive" (and other Lexar Products) seems to be a problematic device. It seems
    this product does not work too well (or work at all) with Solaris' USB drivers:
    http://www.beezmo.com/Solaris.htm
    http://groups.google.de/groups?selm=bdi5g5%2444f%40csdsun1.arlut.utexas.edu

  • How to use cRIO USB mass storage?

    Hi,
    I am using the NI9215 as an analog input port and want to write the data into an external USB mass storage which is connected in the
    cRIo-9012 USB port.  I do not have any idea how to write the data into USB mass storage, does anyone can give me some help?       

    Differences among brands and models are due to the fact that certain devices take greater liberties with the USB mass storage device specification than others.  A venerable operating system like Windows (or even Linux) is shot through with workarounds for device- and manufacturer-specific issues that are not present (as much) in VxWorks, which is the OS used on the cRIO-9012.  Therefore only devices that adhere very rigorously to the specification are going to work properly.
    Unfortunately, degree of adherence to the USB spec is not something that's generally published about a device, nor is there any sort of official certification process.  So to some extent it's trial and error.  I am working with our support enginners currently to develop a list of devices that NI certifies as interoperable with VxWorks, and also VxWorks is increasing the robustness of their USB support with every release.
    EDIT: And the advice about reformatting the device is very sound.  The cRIO-9012 does not support the NTFS file system, only FAT 12, 16, and 32.  If the USB device is formatted for NTFS, it will not function properly.
    Finally, if anyone sees a storage device that fails to work properly despite all these suggestions, please post as much information as possible (model number, manufacturer, capacity).  Having this information will allow us to work with the manufacturers of VxWorks to improve USB support.
    Message Edited by CharlesC on 02-22-2007 12:12 PM

  • Usb mass storage driver is giving '!' mark

    After working continuously for a long period my system becomes unable to recognize pendrive. At that time USB mass storage driver in driver manager gives '!' sign. The problem disappears once i restart the computer. My notebook model is pavillion g6 & its only 4 moths old.
    Please Help me out of this. I need support badly...
    Dibyojyoti Koleh 
    This question was solved.
    View Solution.

    Hi Dibyo,
    Welcome to the HP Forums! I saw your post about the USB issues and I will be happy to help. How long is a long period of time? I am going to need your product number because there are several models in the Pavilion g6 series. What operating system are you running?
    Find your product number on a notebook:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
    Finding your OS:
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Ovi suite messed my computer and usb mass storage ...

    I had lots of problems with my C6 and had to backup it with Ovi suite before sending to nokia service.
    Now I have uninstalled Ovi suite and can't connect my phone anymore as a  usb mass storage drive. I also found out that while installing Ovi suite, it wasn't the only nokia program that got installed to my hard drive.
    How I can not connect my phone again as a mass storage?
    Win xp, sp3
    And I also WANT EVERY NOKIA APP OFF MY COMPUTER. Why this ain't happening while uninstalling ovi suite (which was the only app that I wanted to install)???

    Hi,
    I guess the installation of Ovi Suite is corrupted, please follow the steps provided below to assist you in this regard
    Step 1
    - Go to Add/remove Control Panel
    - Click Ovi Suite
    - Click Repair.
    Once repair is completed then please restart computer and check.
    If Step 1 didnt work, then try the below step
    Step2
    -Go to Add/Remove in Control Panel
    - Click Ovi Suite
    - Click Uninstall
    Also uninstall the following f
    - Nokia Connectivity Cable Driver
    - PC connectivity Solution
    Then right click my computer, click manage.
    - Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
    Then reinstall windows Installer from the link provided below
    For Windows 7 & Vista
    http://msdn.microsoft.com/en-us/library/cc185688(v​=vs.85).aspx
    For Windows XP
    http://www.microsoft.com/downloads/en/details.aspx​?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&dis​...
    - Then restart computer.
    - Download and install Ovi Suite
    - Restart Computer again
    - Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
    - Once done then lauch Ovi Suite.
    - Check for the issue
    Hopefully this helps
    Cheers
    Show appreciation by clicking the kudos star :-), or gesture by typing thanks

  • Z87-G45 USB Mass Storage & other devices not working (except keyboard/mouse)

    My Z87-G45 died on me last month in warranty so I received a replacement one.
    Unfortunatly I'm experiencing mayor USB issues.
    - In Bios mode, no USB mass storage devices are detected (usb stick/disk). USB keyboard and mouse work fine
    - In Windows no USB device except for the keyboard and mouse are detected.
    - Can't see USB Mass Storage Device driver in the USB controllers list
    Installed all latest drivers + CMOS CLEAR just in case. Results stay the same.
    I assume it's best that I return the motherboard?
    Kind regards
    Frederick

    Quote from: frederick.dhont on Today at 02:43:46
    All drivers are already all up-to-date
    I also want to stress that USB mass storage devices are not detected in BIOS, NOR as bootable USB device. So I can't upgrade BIOS even if I wanted to.
    have you done >>Clear CMOS Guide<< with power cord removed?
    have you tested with mainboard out of PC case placed over wooden table?

  • KDE 4.2 and USB Mass Storage , does not write data until unmounted

    Hi,
    I have a Nokia phone that I connect for USB mass storage, and KDE 4.2.2 does not seem to write the data to the device until I unmount.
    Is there a way to force the write so it happens right away?  It's annoying because I can't see any progress when it copies the data at unmount.
    Later,
    Snorkel

    That's kinda the way linux does things, not specifically a KDE issue.  It's so that the system only has to write out to the media only once, even if you separately add/delete/move 50 different files.
    I think you can run 'sync' and that will flush all the file system buffers to disk.
    Last edited by Odysseus (2009-05-01 01:30:59)

  • My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    Here:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • USB Mass Storage Device - ?

    Shuffle shows up as a USB Mass Storage Device under the drive (USB Port) i plug it into.
    It will not take an update or reformat.
    Wondering if it is possible that the factory format could be erased and now the unit is just being recognized as a storage device and unable to be used in the manner it was originally intended for...MUSIC.?
    What does it mean when you get a message "Media in Drive - Changed" ?
    Fixed many other ipods in past but only one shuffle so far....now this one has me going...no clue what else i can do to it.
    Any help would be appreciated.

    i think it was trying to read the shuffle when i wanted to format and restore.
    i never did get it to work.
    no way of knowing now..i just got through tearing into this one to make one good shuffle out of the two i was working on.
    all was good till i went to put the slide bar on/off switch back on....broke the switch again.
    do you have a switch?
    thanks

  • USB Mass Storage device problem

    Hello, I cant use my USB mass storage device in my computer, it is a SanDisk ImageMate CF/SM unit, which works perfectly in every other computer I have tried it, but in this one it hangs while accessing the device, and in linux, it hangs while mounting it (the same thing).
    I dont know what might the problem be but some other people have seen the same problem, perhaps someone here can help me.

    Yeah, I though so, but first I wanted to know what might be causing this incompatibility, in the linux posts people have said that it is a nForce2 generic problem, perhaps a big nvidia bug? heh

Maybe you are looking for