K8N sli Platinum & 3800 + x2 freeze

i got my pc two weeks ago.
AMD 3800+ x2 (toledo E6 in Cpu-Z)
MSI K8N Neo 4 Sli (came with 3.6 bios upgraded to 3.7 and 2 days ago 3.8)
Sapphire x1600 256 pci e
2x512 Corsair VS512MB400 value select(2,5,3,3,8 1T)
Tagan TG480-U01
The first day after a clean install i runned MSI Live update and it just froze (no other application running) force restart and then the hard disk was gone.Fixed it then updated all the drivers for mb graphics nvidia drivers AMD hot fix and M$ hot fix but still it just freezes.Today there were 2 one when i run MSI live update(??) and another when using 3Dmark06(froze between tests).
Used memtest for 1 hour no errors no Oc althought when used MSI core cell Oc(bios) in comander mode froze in 1 min.Temps dont go above 41 42 (user mode 7/8 fan speed in core center when in Cool n Quiet temps reach 42 43 even 46 and it keeps the rpm near 1100 1200??)when running games apps with stock fan.
Whats the problem

disable cool n quiet, it may not fix the problem, but it does more harm than good
we're having, similar problems. Mine only restarts in games, but still sorta the same. Have you tried a different video card in your system, maybe a friends. I have a 7800GT (nVidia guy) and it is the only part of my computer, besides the motherboard, that i haven't replaced with a different part to try to solve this problem. Since we have different cards, i kinda doubt that both of them could be bad, but its possible. I'll know tomorrow b/c i'm putting my friends in here. I've updated bios, my memory, in all slots and combinations, has passed 150 passes of memtest, changed hard drives. I just dunno what to do. I'm kinda thinking that this mobo might have issues. But i'm no expert and that's why i came here for these guys' help. If you get this figured out, please let me know!!!

Similar Messages

[Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

Hye,
I've received these new stuff last night (everything is good until here) :
- Antec Sonata II 450W
- MB MSI K8N SLI Platinum
- Proc. AMD 64 X2 3800+
- GC Sapphire X800 XL 256Mo
I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me )
Can someone help me? Please?
On the MSI site, I also found this :
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
My Thanks in advance.

Quote from: darinn on 12-November-05, 03:22:08
I will ask the sellers if they can update the Mobo for me.
But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
And if it's not possible I'll change the mobo.
Thanks .................................. again.
Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

Can't open BIOs Set-up, K8N SLI Platinum, after re-flash

I used the USB Bio flash tool from the forum to re-flash the BIOs on my K8N SLI Platinum board to the latest BIOS from the MSI site, specs below.
After the re-flash, which seemed to go okay, I cleared the CMOS (turned off and unplugged computer, pushed the clear cmos button for about a minute), and re-booted.
I get a checksum error, no floppy found. I don't have a floppy drive in any case. But then I am unable to enter the bios. Pushing delete at boot gets me a screen that's blank, save for a cursor in the upper left corner. I can't enter anything from there, ESC key doesn't do anything. So I have to reboot.
I can get to the POST screen and pressing F1 allows the system to start and get to Windows, which seems to run okay. System shows that the new BIOS is installed. I just can't get into it to re-set to default settings.
If I turn off the computer, I get the checksum error again and in Windows clock and date have to be reset. But if I just reboot I just have to go through the no floppy found, then push f1 to get back to windows which has retained settings.
I tried doing the flash procedure again and got same result. I haven't tried flashing back to the old BIOs yet. MSI's site only lists the most recent BIOs, my preference would be to try a different one, but not as old as the 2005 version that was on there.
Hopefully someone can tell me something obvious that I'm missing here.
Rick
Windows XP Professionnel
Version   5.1.2600 Service Pack 3 Nu 2600
Motherboard K8N SLI Platinum, with Nvidia nForce 4 SLI chipset
Model   MS-7100
Typ   X86-based PC
AMD 64 3500+ ~2211 Mhz
BIOS/Date   Phoenix Technologies, LTD V 3.12, 10/27/2008
Version SMBIOS   2.3
4,096.00 Mo RAM

Quote
I'd also like the RAM to run at at least 333, rather than the 200 something it runs at with this BIOS.
Check this with CPU-Z at "memory tab" ==> http://www.cpuid.com/cpuz.php
BIOS post screen info can be incorrect., or current older BIOS by 200MHz it may means 400DDR In all cases its cosmetics,
the way of showing real of effective freq. can be changed in future version.
Also with four sticks it should be shown as either 333 or 166, not 200 or 400
Best check with CPU-Z how they are running
Quote
It may now be possible to put something faster in there, but I don't know that for sure. But the 4000+ should improve performance a bit.
Such old CPU's can't be found easy in present days, also its not good investing to invest in old stuffs.
You want W7 and such, changing to the best CPU wont improve much the performance in overall..
Soon or later you have to change it, then this and eventually "newest" CPU which you gonna get will became useless.

MSI K8N SLI Platinum vs 1.5TB Western Digital

Hi Everyone,
I have recently been having some issues with my K8N SLI platinum and hoping I could get some help on resolving the issue.
For the past 2 years i have been running the machine with multiple SATA drives (160GB{boot} and 300GB) and have now tried to add an additional 1.5TB WD and have encountered some problems. If i put my 1.5TB into a USB enclosure and then connect it to my machine it is recognized perfectly and I am able to write and read from the drive, However if i put it into my machine as a secondary HDD my computer fails to boot.
First when i put the drive in my computer no longer boots to windows. It gets to post and loads the drives (including the new drive) and then wont go any further. PC seems to stall and wont allow me to get to the BIOS.
I boot up the machine without the drive connected and go into the BIOS and then reconnect the drive. If i do a HDD Scan on SATA3 then the drive will be recognized (however capacity is only 136GB).
My first thoughts were that it was a bios related issue so I have updated the Bios to the latest (3.C according to LiveUpdate) and am still having the same issue. Im not really sure where to go from now.
Any help would be greatly appreciated.
Thanks for your time.
Tim

Hello! Please say what your system looks like. Include what PSU you are using.
Try a different cable.
Jumper the disk to SATA 1.
Try the disk in a different system.

Very slow USB on K8N SLI Platinum & Windows XP SP2

Hi!
I.e. deleting a folder with small 6000 files (all together they have ~50MB) from USB device lasts according to Windows about 100 minutes.
I've got K8N SLI Platinum with BIOS version 3.70, Windows XP SP2 with all updates and some recent nVidia nForce driver (however I'm not sure which version exactly).
In "Device manager" it looks like the USB driver is from Microsoft from year 2001. Are there some new drivers or something that can help to increase USB performance?
Thanks in advance

Usb's as stick say can't be compared to drives attached to a ide controller.
But you can check to make sure it's running at 2.0 speed like this.
If you look in device manager - on the view on menu - select "view devices by connection" .
Then expand the tree down to USB Enhanced (EHCI) and see if the "disk" is attected to this controller.
If it is you running usb2.0.
Here you see Verbatim Stor'n Go Usb 2.0 thumbdrive attached to the Standard Enhanced EHCI Controller (Usb 2.0)
The other circle shows a bluetooth device runnings as usb 1.1 and attached to the Standard OHCD Controller (Usb 1.1)
An other thing that slows it down is that cache is disabled ("optimized for quick removal") .

K8N-SLI Platinum strange behaviour

Hi there
Apart from the northbridge making a weird noise sometimes when the motherboard is on it's side (i.e. tower case standing upright), the motherboard started behaving strangely on saturday
first the computer refused to find my network, always assigning a local ip, so i tried rebooting the router a few times, and then checked my other computer which is connected to the router fine
then i tried to play a game and noticed the sound had gone, and then the game kept quitting barely after i started it so i gave that up
then, after i had to move the mouse between this one and another computer, the usb ports (all of them, no matter whether through pci card or on motherboard, the mouse stopped working
throughout all of this i rebooted many times.
i finally gave up in the evening, and the next morning on a whim i turned the computer on and everything was fine, what's going on?!?! is this linked to the northbridge at all? i've monitored all the fans and temps and all are normal and running constantly ( cpu never above 40c)
is the motherboard losing it, or maybe the power supply (all voltages seem normal too...)
my spec
Amd 64 3000+ venice
MSI K8N-SLI Platinum
2x512mb Geil Ram
1xSata 250gig western digital hard disk drive
1x Xfx 6600GT 256mb
480w Tagen power supply (can't remember which off had, not the 2force one, the other cheap one, it's modular tho)
i was going to take the motherboard back, but now it's working fine i'm sure they wont accept it
please help
thank you in advance
Reaps

Possible suggestions are as follows: Although the manual states that your power supply should be 450w or above i think that with your PSU your fairly border line. Remember that your psu will only draw the power that it requires and as soon as you start putting 256 Mb graphics cards and upgrading to more ram it is using even more resources and can cause your system to have all sorts of dramas and Re-boots.With your network connection problems this could be due to either network problems in your area which BT or your telephone provider can help you with or as i have recently found out.. too many net work connections that may conflict with each other.Go to your controll panel,Network and internet connections then network connections you should have your broadband or dial up connection listed. If you have more than one connection listed and for instance you dont use LAN (local area connection) Networking then you will have to uninstall this connection and disable all Lan options from the Bios i.e nVidia Mac LAN, nVidia Mac LAN ROM, Marvell Gigabit LAN, Marvell Gibyte rom.A possible other prob may be to disable your IEEE 1394 connection from the bios as i had similar problems to yours but am now okay. I am not saying any of these are related directly to your problems however they are possibilities which you may like to try. Please note also that your USB problems can be solved by using the latest Bios update (which i personally have never had any problems with) but may be risky if you have no idea how to flash your bios. My advice on this would be to read the moderators (Bas..i think) instructions as to how to do this or as he suggests unistall all your motherboards usb drivers that were installed from the disk provided by your Motherboard Manafacturer, Re-boot and let windows re-install its own USB drivers which certainly worked for me.
Q-TEC 650W PSU
AMD Athlon 64 3200+ CPU
MSI K8N SLI Platinum N-Force4 MOB
2x 512Mb Hynix DDR 400 RAM Modules(Single)
Gainforce GeForce 7800 GT
Samsung 120 GB SATA

K8N SLI Platinum - cd-in to digital ou

Hello
I just built my new system with MSI K8N SLI Platinum mobo. I can't get sound from cd-in to be heared from digital out. I had an option on Soundstorm to do this, Live! 24-bit seems to lack this option. Can this be done? Can I got sound from inputs mixed with digital out signal? I got DVB card and would like to hear something on my amplituner without connecting another cable to it.

Nope. This card is even worse. Analog inputs and outputs just doesn't work in digital-out mode. It's insane, but it looks like a feature, not a bug...

MSI K8N SLI Platinum sound problem

I've recently installed Windows vista anda i have a problem with my onboard sound, in this case the SB lIve 24! that comes with the msi k8n sli platinum board, i've tried the soundblaster beta drivers but they didn't work, so if anyone knows where i could find a driver to solve this problem, it would be nice
Thanks for your help!!

http://us.creative.com/support/downloads/download2.asp?MainCategory=1&Product=10315&dlcentric=10005&Product_Name=Live%21+24%2Dbit&filetype=1&OSName=Windows+Vista+32-bit
This is the 32bit version of the driver of k8n-sli Platinum mainboard (I have one)... if you want the 64 bit version, just search in the creative support site. Enjoy!

MOVED: K8N SLI PLATINUM QUESTIONS

This topic has been moved to Overclockers & Modding Corner.
K8N SLI PLATINUM QUESTIONS

Okay finally i overclocked a bit (i am not really in the overclocking business)
With Bios defaults settings without touching anything else i raised FSB to 220 MHz resulting to a 2.2 GHz CPU operating frequency a nice 10% overclock (of course i have disabled spread spectrum in bios) reaching that way the Athlon 64 3500+ .
Every thing seemed rock - stable!!..
However, when i tried to shut down the machine, i got a nice BSOD (Black screen of death) HDD light remained on . As far as i know the board is locking PCI-E , so graphics card and SATA drive should not causing the problem here.
So i raised the CPU core voltage up to 5% and oualla!! Rock stable ( 3 Hours Prime 95)
... did not try to rise chipset voltage or memory voltage (is set to 2.7 volts by memory SPD) since this was not necessary in my case. Might try some more overclocking in the future but right now i am happy with it and just will sit back and enjoy
There is a guy who succeeded in rising FSB to 358!!! Mhz with this board (well almost) he advices just not to enable Aggressive memory timings...
here
Anyway, Thanks for the tips guys
Best Regards,
Markoul

Does K8N SLI PLATINUM reads nb temperature?

Does K8N SLI PLATINUM reads nb temperature?
Because mine shows n\a in the corecenter

First of all, there's no Nortbridge on your board. There's an nVidia nForce chipset.
Then if you look in your maual on page 3-23, you see that there's a temperature reading in BIOS for your "System Temp".. That's the nForce temp sensor.

Will k8n sli platinum support 3TB hard drives

Folks,
will the k8n sli platinum motherboard support 3TB hard drives? I have a 3TB hard drive that displays as 746GB. Latest bios is on board and running win7 64bit.
Many thanks
Dave

in the BIOS it states 3TB under the hard drive section, however that might just mean it's reading the drives properties and not it's capabilities if you know what I mean.
In the motherboards raid setup only 746GB on each drive is available and within Windows only 746GB is available.
I've read somewhere that's it's got something to do with 32bit "storage" hardware systems only being able to address 2.2GB or close to that. I think I'm gonna have to upgrade.
cheers
Dave

Difference between K8N Neo4 Platinum/SLI and K8N-SLI Platinum

Hey guys.... I have one question and i hope you can help me.
I'm about to get an MSI SLI Platinum motherboard, but it seems that there are two versions, the K8N Neo4 Platinum/SLI and the K8N-SLI Platinum.
What is the real difference between them? As i can see in the manual, the Neo4 version has the additional SATA2 and Gbit LAN controller.
Anyone: Does your K8N-SLI board have 4 or 6 SATA2 ports? and 1 or 2 LANs?
At this picture http://www.midtdata.dk/asp/index.asp?varernr=K8N-SLI-PLAT&goto=productinfo&mainfunc=link I can see that there are 6 blue SATA connectors (lower right corner), and 2 LAN ports left to the LPT port... But the description says 4 SATA and 1 LAN, and so says the manual.
To all owners of this mobo: Does this picture look like your K8N-SLI Platinum or does it look like your K8N Neo4 Platinum/SLI ?

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

Is there a big difference between MSI K8N SLI and MSI K8N SLI Platinum motherboa

i am a bit tight on budget, so I was wondering if I should get the MSI K8N SLI motherboard instead of the MSI K8N SLI Platinum motherboard (my previous choice),.......what do u guys say ?

Hi,
Note that he is not talking about the Neo4 versions, looks like in the US MSI has different products:
Here is the K8N SLI:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=681
And here is the K8N NEO4 SLI:
http://www.msicomputer.com/product/p_spec.asp?model=K8N_Neo4/SLI&class=mb
One has Sound blaster, the other does not.
Besides, K8N SLI Platinum has only one LAN.
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=641
While the Neo4 Platinum has two.
http://www.msicomputer.com/product/p_spec.asp?model=K8N_Neo4_Platinum/SLI&class=mb
A bit confusing right !? Remember that this forum is accessed by people all over the world.
The thing is that the Neo4 and the related non-Neo are using the same BIOS AFAIK.
wpr

MOVED: PCI Express, K8N SLI Platinum.

This topic has been moved to AMD64 nVidia Based board.
PCI Express, K8N SLI Platinum.

Hi,
AFAIK it's not possible. You can only use the second PCIExpress as x1(for other devices) or x8 (for GC)
Right !?
wpr

K8N SLI Platinum hidden bios features?

Does the K8N SLI Platinum have any hidden bios features? if so, how do I get access to them? (I have read how to do it on the other NEO boards, and have tried that, but it did nothing). The manual does not say anything about it. And all searches on this forum only turns up info about NEO/NEO2 boards.

Quote from: Stick on 19-December-05, 18:47:36
it all depends on the CPU that you have. what core is it?
Going to be running an Opteron 146. It has done 280x10 on my MSI Neo2 so i'm aiming for the same or more on my Sli Platinum.

K8N sli Platinum & 3800 + x2 freeze

Similar Messages

Maybe you are looking for