K8N SLI Platinum - lockup at boot, caused by USB hub?

Hi.
Updated my bios today as well as enabled 'Cool 'n Quiet'. This caused lockups in Win XP, forcing me to hit the reset button.
After the second reboot the computer refused to boot. According to the D-bracket it stopped at 'BIOS Sign On'.
I followed the troubleshooting guide and ended up here: https://forum-en.msi.com/index.php?topic=75712.msg533104#msg533104
Although the steps taken in the thread above didn't help, one poster mentioned that removing all USB devices could help.
My keyboard is connected to a USB hub in my monitor, when I removed this the comp started up fine, as well as when connecting the keyboard directly to the computer.
Just wanted to pass on my experiences, maybe can help somebody down the line.
Best regards
/Richard

hi nullmind,
have been 1 or 2 pps had problems with usb hubs, Glad u got sorted will add a link to this thread.
cheers.

Similar Messages

  • K8N SLI Platinum Won't boot...

    Hello!
    Yesterday i got my computer parts, i slowly assemblied it and read all the instructions.
    The parts was:
    MSI K8N SLI Platinum
    AMD Athlon 64 3500+ 2.2GHz Socket 939 (Boxed)
    Asus GeForce 7800GT 256MB GDDR3 2xDVI-I
    Corsair TWINX Xpert 3200C2 DDR 1024MBC
    Tagan 420W PSU(I didn't get any info from the reseller about me needing atleast 450W, but it booted so im happy)
    Samsung SpinPoint P120S 250GB SATA2.
    It booted and i was happy, i installed all drivers from the cds and installed a game and it ran smooth.
    I looked up on nvidia.com and saw that there was a newer driver for my graphics card so i downloaded them and got asked to reboot my computer and so i did.
    But it didnt get any further than the re, since it didn't boot up...
    All the fans are running in the computer, the memory display started and displayed info.
    The screen was dead and by pressing numlock repeatedly on my keyboard i noticed it didn't work either.
    I've tried to change spot on both the SATA disc and the Graphics Card. I've tried to reset cmos by holding the button.
    And now im out of ideas
    Thanks in advance /Hugge

    Quote from: SAB on 17-September-05, 19:44:06
    If you have your D-Bracket connected, what light pattern is it displaying!? Also, recheck your physical SATA connectors, as they have a tendency to back out.
    I had it at first, but when i moved my gfx-card i removed it.. Should i connect it again?
    Edit: Ok now i saw what use it has, i will connect it and i'll be back in a few..

  • K8N SLi Platinum USB keyboard boot issues

    Hello, I have a K8N SLi Platinum connected via an Aten US221 USB switch (http://www.aten-usa.com/?product&cat=804&Item=US221) and a Kensington USB hub to a Logitech MX518 mouse and a Logitech multimedia pro keyboard. I use this to connect the same two input devices to two computers and toggle. Previously I used a keyboard to each, with a Dell PS/2 used on the MSI motherboard.
    The problem is that the MSI motherboard fails to detect the keyboard every other boot or so. It doesn't matter if I unplug the Aten switch, the USB hub or even connect it directly to the USB root hub. The only thing that solves it to restart the MSI computer over and over until it decides to start working. And I need the keyboard since I have a bootloader (GRUB) that I select which OS to boot with. The switch and keyboard works without a hitch on an older Dell computer which is also connected in tandem.
    Since I need both mouse and keyboard on a single wire I cannot use a USB-to-PS/2 connector. I've found several posts here which suggests this motherboard is buggy, if that's the case shouldn't MSI issue some sort of BIOS patch?
    Sincerely, Martin "xarragon" Persson

    Might work.
    I don't like the inconsistency you describe: working sometimes and after a lot of reboots. Would you say your system parts, please. Troubleshooting this in your end must include finding a situation where it never works, and when it always work. For example, if you don't have the mouse connected at all, if you don't use the hub, etc.
    Not saying motherboards can't be damaged, specially port end, but the hub thing is a more likely culprit.

  • K8n SLI Platinum can't get OS to boot

    Linked over from https://forum-en.msi.com/index.php?topic=97317.0
    Greetings - This is linked from the above thread and I was advised to come here to see if anyone could sheed some light on this...
    System is:-
    AMD64 3500+
    1gb of Corsair Low latency 2-2-2-5
    2 barracuda 300gb hard drives
    K8N SLI Platinum mo-bo (now sadly running in single card mode...)
    PSU - Hiper HPU-4S525
    NX6600GT TD128E (Newer version)
    Forceware - Nvidia Version: 84.21.
    Problem is - I have two versions of the 6600GT and the older one will work without a problem - either in SLI or in single card mode but the newer one causes the machine to hang at OS boot - I have tried booting with the card in slot two (running in SLI mode)  with the card in slot 1 (running in non-sli mode) and with the newer card in slot 1 (running in SLI) but still the same result - Is it the card, my PCU or a mo-bo problem?!?!
    Any advice/help Greatly appreciated!

    What motherboard BIOS version are you running? The original?
    A newer version might help: http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=641&kind=1

  • [Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

    Hye,
    I've received these new stuff last night (everything is good until here) :
    - Antec Sonata II 450W
    - MB MSI K8N SLI Platinum
    - Proc. AMD 64 X2 3800+
    - GC Sapphire X800 XL 256Mo
    I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me    )
    Can someone help me? Please?
    On the MSI site, I also found this :
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
    Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
    My Thanks in advance.

    Quote from: darinn on 12-November-05, 03:22:08
    I will ask the sellers if they can update the Mobo for me.
    But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
    And if it's not possible I'll change the mobo.
    Thanks .................................. again.
    Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

  • K8N-SLI Platinum strange behaviour

    Hi there
    Apart from the northbridge making a weird noise sometimes when the motherboard is on it's side (i.e. tower case standing upright), the motherboard started behaving strangely on saturday
    first the computer refused to find my network, always assigning a local ip, so i tried rebooting the router a few times, and then checked my other computer which is connected to the router fine
    then i tried to play a game and noticed the sound had gone, and then the game kept quitting barely after i started it so i gave that up
    then, after i had to move the mouse between this one and another computer, the usb ports (all of them, no matter whether through pci card or on motherboard, the mouse stopped working
    throughout all of this i rebooted many times.
    i finally gave up in the evening, and the next morning on a whim i turned the computer on and everything was fine, what's going on?!?! is this linked to the northbridge at all? i've monitored all the fans and temps and all are normal and running constantly ( cpu never above 40c)
    is the motherboard losing it, or maybe the power supply (all voltages seem normal too...)
    my spec
    Amd 64 3000+ venice
    MSI K8N-SLI Platinum
    2x512mb Geil Ram
    1xSata 250gig western digital hard disk drive
    1x Xfx 6600GT 256mb
    480w Tagen power supply (can't remember which off had, not the 2force one, the other cheap one, it's modular tho)
    i was going to take the motherboard back, but now it's working fine i'm sure they wont accept it
    please help
    thank you in advance
    Reaps

    Possible suggestions are as follows: Although the manual states that your power supply should be 450w or above i think that with your PSU your fairly border line. Remember that your psu will only draw the power that it requires and as soon as you start putting 256 Mb graphics cards and upgrading to more ram it is using even more resources and can cause your system to have all sorts of dramas and Re-boots.With your network connection problems this could be due to either network problems in your area which BT or your telephone provider can help you with or as i have recently found out.. too many net work connections that may conflict with each other.Go to your controll panel,Network and internet connections then network connections you should have your broadband or dial up connection listed. If you have more than one connection listed and for instance you dont use LAN (local area connection) Networking then you will have to uninstall this connection and disable all Lan options from the Bios i.e nVidia Mac LAN, nVidia Mac LAN ROM, Marvell Gigabit LAN, Marvell Gibyte rom.A possible other prob may be to disable your IEEE 1394 connection from the bios as i had similar problems to yours but am now okay. I am not saying any of these are related directly to your problems however they are possibilities which you may like to try. Please note also that your USB problems can be solved by using the latest Bios update (which i personally have never had any problems with) but may be risky if you have no idea how to flash your bios. My advice on this would be to read the moderators (Bas..i think) instructions as to how to do this or as he suggests unistall all your motherboards usb drivers that were installed from the disk provided by your Motherboard Manafacturer, Re-boot and let windows re-install its own USB drivers which certainly worked for me.
    Q-TEC 650W PSU
    AMD Athlon 64 3200+ CPU
    MSI K8N SLI Platinum N-Force4 MOB
    2x 512Mb Hynix DDR 400 RAM Modules(Single)
    Gainforce GeForce 7800 GT
    Samsung 120 GB SATA

  • Can't open BIOs Set-up, K8N SLI Platinum, after re-flash

    I used the USB Bio flash tool from the forum to re-flash the BIOs on my K8N SLI Platinum board to the latest BIOS from the MSI site, specs below.
    After the re-flash, which seemed to go okay, I cleared the CMOS (turned off and unplugged computer, pushed the clear cmos button for about a minute), and re-booted.
    I get a checksum error, no floppy found. I don't have a floppy drive in any case. But then I am unable to enter the bios. Pushing delete at boot gets me a screen that's blank, save for a cursor in the upper left corner. I can't enter anything from there, ESC key doesn't do anything. So I have to reboot.
    I can get to the POST screen and pressing F1 allows the system to start and get to Windows, which seems to run okay. System shows that the new BIOS is installed. I just can't get into it to re-set to default settings.
    If I turn off the computer, I get the checksum error again and in Windows clock and date have to be reset. But if I just reboot I just have to go through the no floppy found, then push f1 to get back to windows which has retained settings.
    I tried  doing the flash procedure again and got same result. I haven't tried flashing back to the old BIOs yet. MSI's site only lists the most recent BIOs, my preference would be to try a different one, but not as old as the 2005 version that was on there.
    Hopefully someone can tell me something obvious that I'm missing here.
    Rick
    Windows XP Professionnel
    Version   5.1.2600 Service Pack 3 Nu 2600
    Motherboard K8N SLI Platinum, with Nvidia nForce 4 SLI chipset
    Model   MS-7100
    Typ   X86-based PC
    AMD 64 3500+ ~2211 Mhz
    BIOS/Date   Phoenix Technologies, LTD V 3.12, 10/27/2008
    Version SMBIOS   2.3
    4,096.00 Mo RAM

    Quote
    I'd also like the RAM to run at at least 333, rather than the 200 something it runs at with this BIOS.
    Check this with CPU-Z at "memory tab" ==> http://www.cpuid.com/cpuz.php
    BIOS post screen info can be incorrect., or current older BIOS by 200MHz it may means 400DDR In all cases its cosmetics,
    the way of showing real of effective freq. can be changed in future version.
    Also with four sticks it should be shown as either 333 or 166, not 200 or 400
    Best check with CPU-Z how they are running
    Quote
    It may now be possible to put something faster in there, but I don't know that for sure. But the 4000+ should improve performance a bit.
    Such old CPU's can't be found easy in present days, also its not good investing to invest in old stuffs.
    You want W7 and such, changing to the best CPU wont improve much the performance in overall..
    Soon or later you have to change it, then this and eventually "newest" CPU which you gonna get will became useless.

  • MSI K8N SLI Platinum vs 1.5TB Western Digital

    Hi Everyone,
    I have recently been having some issues with my K8N SLI platinum and hoping I could get some help on resolving the issue.
    For the past 2 years i have been running the machine with multiple SATA drives (160GB{boot} and 300GB) and have now tried to add an additional 1.5TB WD and have encountered some problems. If i put my 1.5TB into a USB enclosure and then connect it to my machine it is recognized perfectly and I am able to write and read from the drive, However if i put it into my machine as a secondary HDD my computer fails to boot.
    First when i put the drive in my computer no longer boots to windows. It gets to post and loads the drives (including the new drive) and then wont go any further. PC seems to stall and wont allow me to get to the BIOS.
    I boot up the machine without the drive connected and go into the BIOS and then reconnect the drive. If i do a HDD Scan on SATA3 then the drive will be recognized (however capacity is only 136GB).
    My first thoughts were that it was a bios related issue so I have updated the Bios to the latest (3.C according to LiveUpdate) and am still having the same issue. Im not really sure where to go from now. 
    Any help would be greatly appreciated.
    Thanks for your time.
    Tim

    Hello! Please say what your system looks like. Include what PSU you are using.
    Try a different cable.
    Jumper the disk to SATA 1.
    Try the disk in a different system.

  • MOVED: K8N SLI PLATINUM QUESTIONS

    This topic has been moved to Overclockers & Modding Corner.
    K8N SLI PLATINUM QUESTIONS

    Okay  finally i overclocked a bit (i am not really in the overclocking business)
    With Bios defaults settings without touching anything else i raised FSB to 220 MHz resulting to a 2.2 GHz CPU operating frequency a nice 10% overclock    (of course  i have disabled spread spectrum in bios) reaching that way the Athlon 64 3500+ .
    Every thing seemed rock - stable!!..
    However, when i tried to shut down the machine,  i got a nice BSOD (Black screen of death) HDD light remained on . As far as i know the board is locking PCI-E , so graphics card and SATA drive should not causing the problem here.
    So i raised the CPU core voltage up to 5% and oualla!! Rock stable ( 3 Hours Prime 95)
    ... did not try to rise chipset voltage or memory voltage (is set to 2.7 volts by memory SPD) since this was not necessary in my case. Might try some more overclocking in the future but right now i am happy with it and just will sit back and enjoy     
    There is a guy who succeeded in rising FSB to 358!!! Mhz with this board (well almost) he advices just not to enable Aggressive memory timings...
    here
    Anyway, Thanks for the tips guys 
    Best Regards,
    Markoul

  • Is the Hiper Type- R 580 modular PSU compatible with MSI K8N SLI Platinum?

    Hey guys, i just recently bought a Hiper Type R 580w PSU after my old PSU went bad.
    I installed the new PSU a few hours ago and came across a problem, nothing shows up on screen.
    When i turn on the computer, the green light is constantly on including my dvd/rw light.
    I double checked everything were connected properly and everything seemed to be connected properly.
    The cpu's fan are running properly including the graphics cards and the case's fan but i can't pinpoint whats causing the the green activity light to light constantly including the dvd/rw.
    I also tried resetting CMOS but it didn't fix the problem.
    So now i'm starting to wonder if it's to do with compatibility issues between the Hiper Type R PSU and my K8N SLI Platinum motherboard.
    So i just wanted to know if the Hiper Type R 580 PSU is compatible with the K8N SLI platinum?
    I would grately appreciate any assistance.

    In short no.
    The Hiper Type- R 580 does NOT have a -5V supply line
    Although the -5V requirement has been removed from some MSI designs, the MSI page for the K8N SLI Platinum http://msicomputer.co.uk/Products.aspx?product_id=703525&cat_id=77 states:
    Quote
    MSI Reminds You...
    • These two connectors (JPWR1 & JPWR2) connect to the ATX power supply and have to work together to ensure stable operation of the mainboard.
    • Power supply of 450 watts (and above) is highly recommeded for system stability.
    • For ATX 12V power connection, it should be greater than 18A.
    • For this model, you must use the power supply that with a -5V pin supply.

  • MSI k8N SLI Platinum - dead??

    Hello,
    I have started the PC as per usual. Pushed the power button... nothing. Then again... nothing. Then I swithed off from the switch near the mains entry. and switched on... PC started however I get nothing on the screen. No beeps.
    I have an Antec Truecontrol 2.0 power supply, an MSI K8N SLI Platinum (socket 939) with AMD Athlon, 2 GB Corsair TWINX Ram, three HDDS SATA, Raptor 75GB as Primary (C:) and another two WDS. Video Card: BFG 7800GTX+ 256MB OC, PCI - Express.
    System has functioned Ok for three and a half years at least. I have replaced the Northbridge Fan from the beginning with a Blue heatsink - I believe Zalman. No temp issues. No overclocking, I am not using any commander modes etc etc.
    When I look at the D-Bracket I get Memory Init Error (RED-GReen-Red-Red). I am pretty sure it is not the RAM. I pulled the RAM, used only one stick... same error.
    I pulled the video card out. Then interestingly the system reaches the phase just before booting and the D_Bracket shows Floppy Init error (Green-Red-Green-Green). I tried moving the video card to the second PCI -ex - I also reach the Floppy Error point. I put in a crappy PIC-Ex video card - I reach the same Floppy init point - the floppy actually seeks but does not try to read. Unfort I forgot where I put the Monitor adapter thingy so I can;t check if I get anything on the screen with the crappy PCI-Ex video card. Will get it... soon...
    I have a hard time determining whether it is the Video card or the mainboard. I have pulled the battery out, left overnight, pushed the BIOS reset... nothing helped. With Video Card in PCI-Ex slot 1, I get the memory init error. With the card in PCI-Ex slot 2 or with no card or with crappy PCI-Ex, I get to the Floppy Init point.
    Could it be that at that point I would be getting a VGA error that I cannot see on the screen ? Why then NO BEEPS? Does this Mobo model not beep, just uses the D-Bracket?
    It is important - if it is the mobo I am done for, I have to buy Mobo, RAM, CPU... $1,000. If it is the Video card I may find something 1 slot wide and similar to the BFG ...
    Can anyone help narrow this please ?
    BTW on the screen I get NOTHING, if I pull out the cable the monitor says - check connection, if I plug it in the monitor goes to power saving.
    Thank you Heaps

    Quote from: Bas on 19-January-09, 00:17:28
    Put a stick of memory in there of el-cheapo brand.
    Those Corsairs you have need more voltage to start if I'm not mistaken.
    Found out what the prob was - the BFG 7800GTX was DEAD. RMA-ed the card. the MSI Mobo is Ok

  • MSI K8N SLI Platinum & Apacer PC3200 or PC4000 memory (Apacer chips)

    I have a situation here. My Athlon Venice 3000 is stable on 2520Mhz. So when i had Patriot PC3200 & Kingston PC3200 dual kit memory i set in bios 280x9 and a 166 memory divider or 315x8 and a 150 memory divider and got ~229Mhz on my RAM. And now Apacer dual kit modules don't want to work on this frequency in this conditions as i discribed earlier (computer isn't boot up and i have a black screen). But PC4000 modules are working on 280Mhz (280x9 and a 200 memory divider). Any suggestions? Is it incompatibility of my mobo and Apacer memory?   
    PS: Bios 3.9 or 3.A modded by Murdok.

    Quote from: kakarocht on 11-June-06, 16:14:30
    List down all your rig including PSU and bios revision and put it in your signature so others can help you. Gd luck.
    Mobo: MSI K8N SLI Platinum.
    CPU: Athlon 64 Venice 3000(1800Mhz) upto 2520Mhz(280x9 or 315x8)
    PSU: Delta 400W.
    Bios: 3.9 or 3.A
    With Apacer memory (PC3200 or PC4000) i have not working memory dividers (150, 166, 183) except 200. Computer is not boot up (black screen).

  • MSI K8N SLI Platinum and 4x512 DDR

    Hello everybody,
    My problem is with a 2nd kit of 2x512 MB DDR I bought recently. I had a pair of  Kingston KHX3200ULK2 512 MB and unfortunately this model was discontinued, so I got another 2x512 MB DDR, this time Geil UltraX which should work @ 5-2-2-2-1T.
    When leaving everything on auto, the motherboard sets the 4 modules at DDR333 with the tightest timing. I want to run them in DDR400, so I set them up manually @ 5-2-2-2-2T. In this config, everything is unstable. Sometimes the system doesn't boot, sometimes I get blue screens, etc.
    Can somebody help me with some ideas ? The system appears to run stable with timings setup at 6-4-4-2-2T, but I really paid a lot on those modules and I'd like to squeeze the most out of them.
    Thanks in advance
    System config following (not overclocked)
    MSI K8N SLI Platinum
    AMD64 4000+ Clawhammer
    2x512M DDR Kingston KHX3200ULK2
    2x512M Geil UltraX 5-2-2-2-1T (don't have the P/N)
    Gainward Ultra 3500 PCX

    Quote from: SIGSEGV on 10-November-06, 02:35:19
    Latest test I did: DDR400 with 5-2-3-2-2T. Ran Prime95 for more than 4 hours and no errors. Still have to check with some games, maybe a 3DMark in loop.
    Will come back with updates.
    Thanks.
    it's nice to be right 

  • MSI K8N SLI PLATINUM OC problem

    Hi
    This is my first topic.
    MSI K8N SLI PLATINUM
    Wincheaster 3200+ 90nm
    Aspire 520watt 35amp
    Point of view 6800ultra
    2*512 crusial BallistiX pc4000
    My problem is that the pc will not boot after 235 FSB. I have tried with 2*512 pc2700 memory with same result. I have tried diferent memory timing but it wont help, i have add more voltage to the memory and cpu but it wont work either. Im open for any idea.
    I hoped to at least overclock the cpu to 2,6 ghz watercoold
    Plz HELP

    Quote from: filleCarpet on 25-April-05, 09:36:05
    Maybe i need to add more electric power for my memorys. The spec says 2.80 volt on 250 mhz but i start to suspect that this is just an minimum requirment, maybe i need more than 3.0 v to operate the memorys on high performance(beyond 230 fsb), but the thing is that BIOS allows me only too add 2.85v maximum.
    Im trying to find a newer version of BIOS version 3.1 if there is any....
    Here: http://www.techpowerup.com/articles/other/111
    v5.0 Beta 4 allows to give 3.10V to the memory but i don´t think it´s going to help you, you probably have the CBBID issue.

  • MSI K8N SLI PLATINUM & Geil PC3200 400MHz CAS 2-5-2-2

    I'm thinking of buying a new pair of memory modules, particularly,
     Geil Ultra X  PC3200 400MHz CL2-2-2-5 DDR.
    Has anyone tested them with MSI K8N SLI PLATINUM?
    The specifications are:
    "PC3200 400MHz CAS 2-5-2-2
    GeIL Ultra-X TSOP 32x8 DDR Chips
    184pin, Non-ECC, Un-buffered DDR DIMM
    Platinum Copper Heatspreader
    6 Layers Ultra Low Noises Shielded PCB with Gold 30u" Plating
    Temperature thermometers
    Retail package
    2.55V-2.95V
    Lifetime warranty"

    I continued with the overclocking to see the limitations of the memory and not only.
    I managed to run the modules at 466MHz with 2-2-2-5-1T at 2.85v which was the upper limit.
    Unfortunately bios limitations didn't me allow to reach 500MHz as the memory chips could give.
    Max voltage at 2.85v.
    The ultra x series are out in the market with two chips: Samsung TCCD and Winbond BH-5.
    For that I searched and learned that the Windbond BH-5 can't work at CL 3, which I set at system bios.
    The system couldn't boot. So I suppose I'm having the coolest BH-5.
    It also needs over 3v in order to reach the 500MHz frequency and the necessity of an air cooler above rams.
    Maybe in the future with a more overclockable m/b like Stick proposed.

Maybe you are looking for