K8NGM-V Memory shows at 333, not 400

My K8NGM-V, with athlon 64 3000, ati radeon x1550 PCI-E 512 ddr2, Kingston hyperX (2 sticks) 512mb 3200, LAtest bios on motherboard, with onboard video disabled.  Shows my memory to be "DRAM 333mhz" and not 400mhz.  Any idea how to fix this?  I dont know all the setting to properly configure the memory on the bios myself, but when i do put it to 200, it still boots as 333
Any help is appreciated!

Here are the posts - this may not mean anything, but i put in each stick seperately and they still run at 333mhz individually. Plus i have used this memory in the past with another msi (fsb-neo) board and it ran at 400mhz.
CPU-Z 1.42 report file
Processor(s)   
Number of processors 1
Number of cores 1 per processor
Number of threads 1 (max 1) per processor
Name AMD Athlon 64 3000+
Code Name NewCastle
Specification AMD Athlon(tm) 64 Processor 3000+
Package Socket 754
Family/Model/Stepping F.C.0
Extended Family/Model F.C
Brand ID 4
Core Stepping DH7-CG
Technology 0.13 um
Core Speed 2009.3 MHz
Multiplier x Bus speed 10.0 x 200.9 MHz
HT Link speed 803.7 MHz
Stock frequency 2000 MHz
Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, x86-64
L1 Data cache (per processor) 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache (per processor) 64 KBytes, 2-way set associative, 64-byte line size
L2 cache (per processor) 512 KBytes, 16-way set associative, 64-byte line size
Chipset & Memory   
Northbridge NVIDIA GeForce 6100 rev. A2
Southbridge NVIDIA nForce 410/430 MCP rev. A2
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR
Memory Size 1024 MBytes
Memory Frequency 167.4 MHz (CPU/12)
CAS# Latency (tCL) 2.0 clocks
RAS# to CAS# (tRCD) 3 clocks
RAS# Precharge (tRP) 3 clocks
Cycle Time (tRAS) 7 clocks
Bank Cycle Time (tRC) 10 clocks
DRAM Idle Timer 16 clocks
Command Rate (CR) 1T
System   
System Manufacturer To Be Filled By O.E.M.
System Name MS-7228
System S/N To Be Filled By O.E.M.
Mainboard Vendor To be filled by O.E.M.
Mainboard Model MS-7228
BIOS Vendor American Megatrends Inc.
BIOS Version 080012
BIOS Date 08/08/2006
Memory SPD   
Module 1 DDR, PC3200 (200 MHz), 512 MBytes, Kingston
Module 2 DDR, PC3200 (200 MHz), 512 MBytes, Kingston
Software   
Windows Version Microsoft Windows XP Professional Service Pack 2 (Build 2600) 
DirectX Version 9.0c
sorry couldnt figure out how to make a screen shot -- alt + printscreen didnt work
thx

Similar Messages

  • Cisco IPS Error -- errsystemerror-ct-sensorapp.333 not responding

    Hi Team,
    I am getting the below error while accessing IDM. I rebooted the device, after some times i get the same type of messages..
    error connecting to sensor + failed to load sensor. errsystemerror-ct-sensorapp.333 not responding. please check system processes- the connect to the specified lo::clientpipe failed.
    Will be appreciated for the quick reply on priority...
    regards
    Rajesh

    Hi,
    Pls find the below show version..
    Looks like all the processes are running..
    Application Partition:
    Cisco Intrusion Prevention System, Version 5.1(5)E1
    Host:
    Realm Keys key1.0
    Signature Definition:
    Signature Update S323.0 2008-03-24
    Virus Update V1.2 2005-11-24
    OS Version: 2.4.26-IDS-smp-bigphys
    Platform: IPS-4240-K9
    Serial Number: xxxxxxxxxxxx
    Licensed, expires: 01-Dec-2009 UTC
    Sensor up-time is 14:55.
    Using 512040960 out of 1454153728 bytes of available memory (35% usage)
    system is using 17.4M out of 29.0M bytes of available disk space (60% usage)
    application-data is using 44.1M out of 166.8M bytes of available disk space (28%
    usage)
    boot is using 35.3M out of 68.6M bytes of available disk space (54% usage)
    MainApp 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Runn
    ing
    AnalysisEngine 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600 Runn
    ing
    CLI 2007_FEB_02_15_58 (Release) 2007-02-02T16:04:00-0600
    Upgrade History:
    * IPS-K9-sp-5.1-5-E1 10:28:00 UTC Fri Feb 02 2007
    IPS-sig-S323-req-E1.pkg 07:26:42 UTC Tue Mar 25 2008
    Recovery Partition Version 1.1 - 5.1(5)E1

  • ORA-27102: out of memory SVR4 Error: 12: Not enough space

    We got image copy of one of production server that runs on Solaris 9 and our SA guys restored and handed over to us (DBAs). There is only one database running on source server. I have to up the database on the new server. while startup the database I'm getting following error.
    ====================================================================
    SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 6 16:36:14 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-27102: out of memory
    SVR4 Error: 12: Not enough space
    SQL>
    ====================================================================
    ABOUT THE SERVER AND DATABASE
    Server:
    uname -a
    SunOS ush** 5.9 Generic_Virtual sun4u sparc SUNW,T5240*
    Database: Oracle 10.2.0.1.0
    I'm giving the "top" command output below:
    Before attempt to start the database:
    load averages: 2.85, 9.39, 5.50 16:35:46
    31 processes: 30 sleeping, 1 on cpu
    CPU states: 98.9% idle, 0.7% user, 0.4% kernel, 0.0% iowait, 0.0% swap
    Memory: 52G real, 239G free, 49M swap in use, 16G swap free
    the moment I run the "startup" command
    load averages: 1.54, 7.88, 5.20 16:36:44
    33 processes: 31 sleeping, 2 on cpu
    CPU states: 98.8% idle, 0.0% user, 1.2% kernel, 0.0% iowait, 0.0% swap
    Memory: 52G real, 224G free, 15G swap in use, 771M swap free
    and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.
    and ulimit -a gives as below..
    root@ush**> ulimit -a*
    time(seconds) unlimited
    file(blocks) unlimited
    data(kbytes) unlimited
    stack(kbytes) 8192
    coredump(blocks) unlimited
    nofiles(descriptors) 256
    memory(kbytes) unlimited
    root@ush**>*
    and ipcs shows nothing as below:
    root@ush**> ipcs*
    IPC status from <running system> as of Fri Aug 6 19:45:06 PDT 2010
    T ID KEY MODE OWNER GROUP
    Message Queues:
    Shared Memory:
    Semaphores:
    Finally Alert Log gives nothing, but "instance starting"...
    Please let us know where else I should check for route cause ... Thank You.

    and I compared the Semaphores and Kernel Parameters in /etc/system . Both are Identical.are identical initSID,ora or spfile being used to start the DB.
    Clues indicate Oracle is requesting more shared memory than OS can provide.
    Do any additional clues exist within alert_SID.log file?

  • HT4623 My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. 

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an I get rid of that

    Try this...
    have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
    That resolution came from another thread on this issue, and this did solve to poster's issue.

  • My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message.  How an

    My deleted contacts still show up when I want to send a text message. But when I go to my address book there not there only when I want to send a text MSG there name comes up and if I select them it only show there number not name in the message. How an I get rid of that

    Try this...
    have a text convo with the person you want to delete. Go to the top contact in the text convo, hit edit contact, and delete that contact.
    That resolution came from another thread on this issue, and this did solve to poster's issue.

  • HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

    I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

    I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
    also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
    I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

  • How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the

    How do I get a PDF document put into an attachment form that I can drag to an e-mail.  Usually I get an icon showing an spiral note book which then becomes an attachment when I drag it to the e-mail, but occasionally it stays in PDF and prints out on the e-mail.  What have I done differently?

    Thanks again for the detailed instructions Srini!
    And I really hate to be a pest . . . but . . .
    Using your example and not modifying it, I get the e-mail form filled out correctly and the pdf attached, however, I'm not prompted to sign it.
    Any more clues?

  • Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes.

    Iphone 3GS no battery charging icon, does not show charging, does not get recognized by computer or Itunes, have tried restore mode & DFU mode. Bad battery or port?

    iPhone not appearing in iTunes

  • My iPod Touch 2g is unresponsive to the touch completely. I have restored it twice and updated it, the water sensor shows it has not been wet. Not jail-broken.How do i fix this and will Apple fix it? Thanks

    I have restored it twice and updated it, the water sensor shows it has not been wet. Not jail-broken and exterior buttons all work.  It seems to have problems connecting and being found by a computer (Windows). How do i fix this and will Apple fix it? Thanks

    lol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
    Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
    Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific?

  • HR iViews are not getting displayed and showing "Page can not be found".

    Hello,
    I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
    We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
    I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
    #0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    #1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
    #1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    #1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
    #1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
    #1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
    Please let me know if anybody has come across such scenario before.
    Thanks
    Suhas
    Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

    Hi,
    This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
    Thanks
    Suhas

  • When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    When i connect my ipad2 to iTune, it show "iTunes could not check for an update to the carrier settings for your iPad. An unknown error occured (1651)". What should i do to solve this problem? My iTune version is 10.1.4.10 and my ipad is 4.3.5.

    If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

  • Finder shows some but not all files in a folder

    In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
    I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname>  staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1239425731.tmp
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1240072173.tmp
    -rw-r--r--@  1 myname  staff    52796 13 Feb 11:08 safe1.xlk
    -rw-r--r--@  1 myname  staff    95320 12 Mar 16:06 safe2.xlk
    I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
    If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
    So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
    Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

    So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
    Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
         defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
    ...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

  • Satellite Pro P100-327: memory card reader does not read Memory Stick Duo

    I just got a P100-327
    http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/productPage.do?service=UK&PRODUCT_ID=121991&toshib aShop=true)
    which, according to that page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick, Memory Stick Pro, MultiMedia Card, xD-Picture Card)" but the pdf user manual that came with it says that it does not support Memory Stick Duo, Memory Stick Pro Duo or mini-SD.
    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter and the reader can't seem to read either of them (they should both count as Memory Stick Pro which should be readable right?)
    Should I be able to read my Memory Stick Pro cards? Why can't I since it says I should be able to? Do I need to install something first?

    Hi
    In my knowledge and according to the manual the Bridge Media slot supports Media of type
    - SD Memory Card
    - MultiMediaCard xD-Picture Card
    - Memory Stick
    - Memory Stick Pro
    Please note that the Memory Stick and Memory Stick Pro are not the same as Memory stick Duo and Memory Stick Pro Duo.
    Dont mix it.

  • I have buy 4s it's unlocked and its working with different carriers in Bahrain but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this

    I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?

    Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
    http://support.apple.com/kb/ht1808
    If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
    Regards.

Maybe you are looking for

  • Looking for a "Where Ive Been" app

    Hey guys, Ive been looking around for an app just like "Where Ive Been" http://w3.whereivebeen.com/ Its a cool website that lets me mark off on a map where all ive been. I was hoping to get a desktop solution though. Any ideas?

  • Windows 8 libraries don't sort/group by metadata (like Windows 7 could)

    One of the great things about the Windows 7 libraries was the way they let you group and sort the stuff in them. For example, in the music library you could sort by artist, and it would group them by albums (see attached). By contrast, the Windows 8

  • Maximum HDD size can be supported in x61?

    Hi there ! What is the maximum HDD size limit can be installed with ThinkPad x61 by the following specifications? - TPx61, Model:7672A22, OS:VistaBusiness(6.0, Build 6000), BIOS:Ver1.00PARTTBL, Processor:Intel(R)Coe(TM)[email protected](2CPU​s), RAM:

  • NX7900GS startup issue

    Hey guys, Bit of a tech noob here in some regards, so I apologize ahead of time.  I have a NX7900GS video card and I'm having a problem with me E521 Dell Dimension.  What happened was the computer went into sleep mode like normal, and I tried to wake

  • Can fix the company name and signature at bottom

    In some print out like 'Sales Order' & 'Purchase Order', it always has the company name and signature prints at the bottom of last page. If I use footer to handle this, then each page will leave some space at the bottom. I cannot control the company