K8NGM2-FID : can a DVI-I plug can be plugged into the motherboard DVI-D plug ?

Hello,
I intend to buy a flat panel for the MSI K8NGM2-FID motherboard. Can the screen DVI-I plug can be plugged into the motherboard DVI-D plug ?
Thanks.

Quote from: passionne on 31-January-06, 23:59:24
OK, thanks. I was not able to modify the RAM voltage beforehand, since I pressed the "enter" key first.
But, now that I have applied 2.6 V, I don't know how to make the RAM work at 400 Mhz. Indeed, CPUz shows me that it runs at 333 Mhz.
In the chipset configuration, I can change the RAM frequency but the allowable values are 100, 133 and 166 Mhz. Not 200 Mhz.
And I noticed that the command rate is 2T. I changed it to 1T and no boot. I was forced to clear CMOS.
I looked at the RAM specifications (http://www.ec.kingston.com/ecom/configurator/PartsInfo.asp?ktcpartno=KVR400X64C25/512) but it is not told if these DIMMs can run at 400 Mhz, 1T.
Would you have an idea ?
Thanks.
I use A64 3700+ with Corsair XMS 1G x 2. All RAM setting is auto and CPUz read 200MHz (3-3-3-8). RAM is at 2.6V
May be you can try using auto RAM setting and slightly increase the RAM voltage to 2.65V or 2.7V. If it work, you may try other custom RAM setting.

Similar Messages

  • I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

    I'd say your sister messed up and your iPod is toasted.
    Think about it...  She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer... 
    Also take into consideration how old is your sister, and how much does she know about electronics?

  • Can't boot into the bios

    Hi!i need some help please T.TIve just changed my HP 14-d003la Notebooks  HDD for an SSD.Saddly, after the cloning and plugging everything back in, the bios simply wont just boot. I even tried to put the HDD back, but no luck, ive done several BIOS recovery with the USB, still nothing. Everytime i press like F2....BIOS setup Options.....stays there forever Any clue on how to solve this?Thnx in advance!

    thereafter you can't boot up into the bios with either the F2 or the F12 key.
    Karl, you can boot directly into the BIOS by pressing (and holding down) F2 prior to pressing the power switch.
    -Jerry

  • If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

    if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
    The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
    it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
    and i hope you understand my problem..
    i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
    -sierra

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage.  What would I do to get into my ipad?  please I need your help

    Please I need a help.  I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full.  Please do you have a knowledge of how I can get rid of the message and get into the ipad?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • HT201365 I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Help Please

    I've forgotten my passcode and can't get into the phone to turn off "find my iphone" in order to restore it... Can anyone help?

    If you know the password to your apple id login - you can then do a restoration once you have put your device into recovery mode using itunes.
    read this article to give you direction how to put your device into recovery mode.
    Once you have put in your apple id login and password this then will allow you to restore the device once the device is placed in recovery mode.
    good luck!
    http://support.apple.com/kb/ht1808

  • IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

    I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
    Thanks for any advice you can offer!

    I have tried all the above and nothing seems to work. Any other suggestions?

  • My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

    My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

    Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
    recovery mode restore as descibed in HT1808 might be  your last resort though

  • Transaction data can be loaded into the Fact table without loading the

    Transaction data can be loaded into the Fact table without loading the corresponding master data (Example : Sales analysis transaction data can be loaded without populating any of its  dimension’s master data)
    a.     True
    b.     False

    Hi Kutti,
    True - You need to select the option in the infopackage - alwyas load even if no master data exists.
    Bye
    Dinesh

  • Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

    Time Machine on my iMac won't open iPhoto. It goes to desktop screen automatically. When I select User/Picture/Iphoto library it only brings up the preview page with the size of the folder. I can't get into the library to look for lost photos.

    Thank You. This helps me alot to get into the masters and to see events and photos in a utilitarian way, but it is not as easy as viewing the normal iphoto format to find photos.  Can I do something else or did I not do something right to not see normal iphoto in Time Machine ?

  • I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner.  However, the screen is white with "iTunes" in the middle when I do. Any suggestions?  Thank you.

    I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner and get a drop down list.  However, the screen is then white with "iTunes" in the middle. Any suggestions?  Thank you.

    Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    If your computer has one of the LSPs listed you may have to reset winsock.
    If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • After upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?

    SqueezeAce wrote:
    after upgrading to Snow Leopard, I can not log into the computer. What Can I do?
    Stick the 10.6 disk into the machine and reboot holding the option/alt key down on a wired/built in keyboard.
    On the second screen, under the Utilities menu is a Password Reset, use it.
    Step by Step to fix your Mac
    What this will do is reset the password and the user account permissions in the process.
    You might have problems with Keychain afterwards, to fix that.
    https://support.apple.com/kb/HT1631  https://support.apple.com/kb/TS1544
    If your still having trouble, look through these User Tips
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/?p er_page=50

  • I can't log into the Itunes store,says I need to update my security but the link won't open in Explorer, bad http!

    I can't log into the Itunes store with my Apple ID.Says I need to update my security but the link doesn't work,bad http.Get internet explorer canot connect message.

    Good day Goose253501,
    It sounds as though your iPhone is having some difficulty accessing the App Store servers when attempting to sign in. I would suggest that you troubleshoot using the steps in this article - 
    Can't connect to the iTunes Store - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • TS1424 is it just me that can't get into the store

    is it just me that can not get into the store

    You're not the only one some European countries (UK, Poland, Austria, Belgium, Germany < these are the countries that have confirmed they are having this problem) are having the same problem. This discussion is also highlighting the same problems you are having:
    https://discussions.apple.com/message/22845142#22845142
    I can confirm that the homepage and the music section in the iTunes store are experiencing this problem.

  • I can not login into the system.

    Hello! A problem - I can not login into the system. After entering the login and password for a second or two there is a blue screen, then the universe, then again a blue screen, and - again, the login window. This happens with just one account of the four on my iMac-2007 with OS 10.6.8. How can I be?

    Click here and follow the instructions.
    (36381)

Maybe you are looking for