K8T Master 2 with 2 x 250's
HI guys, i am at my witts end.
I have got a K8T master 2
2 x opteron 250's
4 x Hynix PC3200 512 ECC-Reg dims (2GB)
When i turn the blighter on i just get 1 long beep (which repeats). I have had the CPU's checked by AMD and have had the board replaced at dabs. Still no luck.
The board is brand new, my big worry is that the CPU's arent recognised as the board might not have the latest 250 capable bios. Do i need to get hold of an older CPU to post and bios update or should it just run the procs as older variants?
Anyone got any other ideas. PSU should be plenty powerful enough.
I have never seen the Post screen and am starting to think i never will......
Thanks for any help
Richy
No it is in the correct hole by the ATX backplate and usb connectors. (With the bit of paper over it)
I am worried i may have originally plugged it into the agp socket bit. Could this have damaged the board?
I have tried 2 PSU's with it, 1 is a 550 watt and now im using an antec 380 watt. All i want to do is get it to post. If i thats the problem ill get a more powerfull one but i was under the impression it would at least post.
Can anyone recommend a PSU that i could source from the UK to fit into this if that is the problem?
Thanks for your help guys, very much appreciated
Richy
Similar Messages
-
Hi,
I am new to this forum but had been working on this problems for a week!
Here my system:
MSI K8t Master 2 FAR
ECC ram 2GB
Dual Opteron 250 replaced the dual Opteron 242 one week ago
BIOS upgrade to 1.4
Window Vista 64bit from Window XP Pro
The POST, Device Manager detect two new CPUs. However, there are only one CPU being utilize in task manager (yes, I have check one graph per CPU). It appear from the forum that BIOS 1.35B5? would work but I could not find it. Try to install Window XP Pro but failed (flopppy drive does not work).
Any help and suggestion would be greatly appreciated!
WaiNo options after slash "/"?
Quote from: BOSSKILLER on 14-August-08, 19:42:45
Does it worked before to update BIOS to 1.4?
Quote from: Wai on 15-August-08, 06:55:42
With BIOS 1.1 and dual Opteron 242, I have both CPU work as shown by Device manager and task manager (two CPU graphs). I can only get one CPU work since I upgrade to Opteron 250 and BIOS 1.4. Unfortunately BIOS 1.1 do not support Opteron 250.
Wai
Check this topic:
https://forum-en.msi.com/index.php?topic=90059.0
"Running 2 CPU's will show just 1 CPU in the Opterating system, was reported by a user."
Quote from: Lord Anubis on 01-June-08, 21:22:00
has anyone tried the new v1.40 bios released 2008-04-10 for this board?
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=133&prod_no=675
Quote from: slava_b on 17-June-08, 16:02:30
I tried. More stable then 1.47, but not fully workable. Second CPU dont work, Smart fan dont work, if 4Gb installed -> CPU kernel time load 60-70% permanently. Last stable workable release is 1.35, but i have slow down if install LSI 21320R.
1.35 appear to be last stable version reported by users
Quote from: Wai on 10-August-08, 23:21:53
It appear from the forum that BIOS 1.35B5? would work but I could not find it.
Here is it:
https://forum-en.msi.com/index.php?action=dlattach;topic=90059.0;attach=1707
Change Log, your CPU is supported as well:
2. Added Feature:
(a)support new Opteron 250 CPUs
Flash at own risk -
K8t master 2 questions....
Ok, soon I'm picking up a k8t master 2 and two opteron 240s with an Antec 550watt EPS12V PSU.
But I have a question.
Are the CPU heatsink mounting wholes compatible with p4 heatsinks?
I'd like to pick up a pair of Swifttech MCX4000s, but need to be sure before I buy them.
The MCX4000s are very large, well they don't appear any large than the retention mechanism, so even next to the AGP with a MCX4000 my ATI Radeon 9700 Pro should still fit.
Thanks!I emailed Gamepc and they said it "should" work, but they used the ones that came with the motherboard.
I guess I'm just leary of spending $80 for two heatsinks if there's a chance they won't work.
For what I've read the MSI ones that come with it are noisy and I don't know about their actual cooling ability. But I know the Swifttech MCX4000 are top notch heatsinks. That and call me funny, but I like matching heatsinks. -
K8T Master & Nvidia Quadro4 NVS 400??
I was just wondering if anyone here is using an Nvidia Quadro4 NVS 400 (4 display PCI video card) with the K8T Master-2 FAR motherboard?? After having nothing but problems trying to get two dual-head video cards to work on this mobo (one AGP, 1 PCI) I've decided to maybe try a single quad-display PCI card, but was hoping for some input before I make any purchases.
Thanks in advance,
BillHi and thanks for the reply,
I did use a different switch and it did the same thing.
I haven't tried a higher wattage one but I doubt it needs that much juice,
especially without anything plugged , ie. hdd, cdrom...
Ro -
K8t master far 2 -error sound guide?
I have just put together a dual sys
- on a k8t master far2 opteron244
- gail 1gb*2 3200 dual channel RAM
- sata western 200gb + ata disc for windows(not installed yet)
- nvida quadro 980xl
I get a error bip when I try to boot the pc for the first time
-can anyone link me to a page where I can find the error codes?
or if anyone know what I might have done wrong -please post.
thanksQuote
Originally posted by pv4_gwar
hello
My psu: Enermax EG451P-V FM power supply which pumps out 430Watts / 15Amps on the +12Volt outlet
That PSU wasn't ment to power 2 CPU's. Like Bas suggested: better get one with a single rail, so you will have enough to power both CPU's. -
K8T Master 2 FAR; Hard Drive Questions About
Greetings!
I just got off the Google bus and stubbed my toe on your doorstep. What luck!
I have many questions, and it's getting harder to find answers for a mainboard that's not being sold "new" anymore. I did see some other topics that go along lines similar to my own, but I figured it would be a good idea to open a new thread with my specific questions.
I have decided to split my questions into three parts. This is part one, "hard drive" questions.
HARD DRIVE RELATED:
Western Digital recently announced a new high-capacity SATA Raptor drive, with 150 GB of storage:
1) Can I mount two of them into my K8T Master 2 FAR system and "hardware stripe" them for Windows/XP?
....1A) If yes, is there a minimum recommended BIOS that I should be running?
....1B) If no, then would it be feasibile to "software stripe" them in Windows/XP Pro?
If I decide to proceed, I will be well-prepared to accept the risk of data loss that would occur if one drive were to crash.
I currently run my system with a removable SATA drive caddy for my system drive. This makes it easy to swap OS's by swapping hard drives without opening my CPU case. If I go with a dual-striped SATA drive arrangement and two Raptors, then I'll replace that removable caddy with a unit that can accomodate two SATA drives.
....1C) Once in a blue moon, I get a BSOD after having swapped SATA drives. It happens when I first boot Windows/XP after having run Linux. Hot-swappable claims notwithstanding, I always swap drives while the system is powered down, although I don't typically shut off the hardware switch at the power power supply. Are there any known issues or reports of other people having similar occurrences?
I also run some IDE devices for data and archival purposes. My system is typically set up as follows:
CH 0/0 - Data drive
CH 0/1 - DVD burner
CH 1/0 - Data drive
CH 1/1 - Data drive
Recently, my system stopped "seeing" any hard drives on CH 1 drive 1. Known good drives won't show up in the BIOS, and auto-detect doesn't "see" a drive in that position. I have tried more than one drive, and the problem stays on that channel and position. I swapped cables with a known good cable, and the problem stays on that channel and position. For the time being, I have disconnected one of the data drives...but I'd really like to resolve this issue if possible.
....1D) Are there any known problems or issues with "disappearing IDE devices" in the K8T Master 2 FAR?
Thanks in advance!Can't say, this is the first time I hear about SATA caddies....
Maybe a bad contact or so?
Sata is pretty sensitive to connection problems, or even folded cables for that matter... -
Any Recommended cpu Fans or PSU for the k8T master 2
I've got the motherboard working but does any one with a k8t master 2 could you recommend any better cpu fans for the motherboard i don't really like the ones that came with it
thanksAs for the powersupply, the best is the Enemax 465, little bit hard to get, but does the best job.
See my sig for the details. -
Report For list of material Master with PO text
Hi all,
I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
If any one can help, please reply to this theard.
Regards,
Kapil KulkarniTo get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps. -
Creation of Customer Master with Sales Data
Hi Experts,
I have a requirement in whic i have to Create/Change Customer Master through Custom program.
The Customer Master details will be stored in file and Retrieved through program with the following Tables to be Updated
KNA1 - Customer Master
ADRC - Address
ADR2 - Telephone Number
ADR3 - Fax Number
ADR6 - E-Mail Addresses
KNVV - Customer Master Sales Data
KNVP - Customer Master Partner Functions
KNVK - Customer Master Contact Partner
From SDN i came to know about CMD_EI_API . Can you please tell me which is the method suitable for Creation/Change of Customer Master with the above details.
Regards,
Shrikanth RHi Experts,
Please help me how to use MAINTAIN_BAPI method in Class CMD_EI_API in order to create Customer Master.
Regards,
Shrikanth R
Edited by: SHRIKANTH R on Jul 15, 2010 11:59 AM -
(JHeadstart release 10.1.2.) I can make a master with multiple detail pages work (displayed on the same page or different pages), except under one condition. Assume the following situation:
Master: View object A based on entity A
Detail 1: View object B based on entity B with a modified WHERE clause
Detail 2: View object C based on entity B (yes, same entity object as view object B) with a WHERE clause different than the one for view object B
A one-to-many view link exists between view object A and view object B, and another exists between view object A and view object C. The query for each of the view objects is standard (i.e., no expert-mode queries). The master and the two detail view objects (via their respective view links) are assigned to an application module.
I created a JHeadstart application structure file for the application module with Struts and UIX. I added view object A as the top group (table-form layout). I next added view object B as a detail group (form layout, same page) beneath view object A. I finally added view object C as a detail group (form layout, same page) beneath view object A (i.e., parallel to view object B). The module generated and built cleanly.
I ran the application, entered a master record, and saved the data. When I pressed the button to create a new record for detail 1 (view object B), fields appeared for the pages for detail 1 and detail 2 (view object C), not just detail 1. Also, the value of the Descriptor Attribute from the master record that linked it to the two detail pages populated the corresponding field in both of the displayed pages for the detail records.
This behavior does not occur if view object C (detail 2) is based on an entity different than view object B. Will JHeadstart allow a master to have multiple details where the details are based on the same entity object? Thanks.
RayRay,
Unfortunately I cannot reproduce the problem. I filled in the A, B and C using a scott/tiger schema as follows:
A: Departments
B: All employees having a salary < 1000
C: All employees having a salary >= 1000
Then I created an application module with one group having two subgroups everything same page, just like you specified. Everything seemed to work fine. Do you have any idea what's different in your situation.
Aard-Jan van Kesteren
JHeadstart Team
Oracle Consulting -
Creating a Master with Two Detail report style
In a Group-Above report data model, how does one add a 2nd detail group appearing at the same hierarchial level as the 1st group?
The report already exists with MASTER and detailA. I need to add detailB and tie it to MASTER just like detailA.
|MASTER|
|detailA||detailB|
\-------/\-------/Amjad,
Thanks for the reply. My question relates to your suggestion #1: How does one create detailB in the data model?
The only thing I have been able to do is to create a 2nd query linked to the 1st query. This makes the data model look like it has two masters each with one detail. What I want is a single MASTER with two details.
Are you suggesting that the only way to accomplish this is by having two queries, one linked to the other, as in the crude rendering shown below?
|MASTER1||MASTER2|
|DETAIL1||DETAIL2|
The above would be displayed in the data model as follows:
|__Q_1___||__Q_2___|
|G_DETAIL1||G_DETAIL2|
\----------------/\----------------/ -
Master with more than One details
Dear All,
i am using Apex 4.2, oracle database 11g R2 and internet explorer 9.
I have three tables,A,B and C.
A is master table.
B and C are details tables for A.
how could i create a master with 2 details form in such a way that data entry are possible in both the details ?
i search internet, but am failed with this.
kindly guide accordingly.
Regards.hai , please through the link and see the page source code.http://apex.oracle.com/pls/otn/f?p=4550
application: 32172
workspace: ram_r&D
user/password: aramani/apex
=============
DB script will be in:
HomeApplication BuilderApplication 32172Shared ComponentsStatic Files(legal script.sql) -
Master with more than one Detail
Hallo,
Does anybody know how to create master with more than one detail. i.e
Employee as a master with the following details
(Dependent, Education, Contract, Job History).
thanks..
RibhiRibhi,
A master detail form typically consist of a master form and a tabular form for the detail records, i.e. you can edit your detail records on the same page as your master record. Since you can only have one tabular form per page, having multiple of these detail tabular forms, won't work. However you could instead create your master-detail form with the option of creating the detail as a read-only report, which would have an edit link on each detail row, that would take you to a form to edit each detail row individually. With this model, you could just add additional reports after the initial creating of the master-detail form.
Regards,
Marc -
Is it possible to create a customer master with different address
Hi Gurus,
Is it possible to create a customer master with different address as we maintain in SAP CRM.
Kindly help me onthis issue \
Regards
KannanHi Kannan,
There are no multiple addresses but you can use multiple unloading ponts for the same address for the ship to Party.
So when you create a Sales order the system will give a pop up with the unloading points allowing you to select the desired one.
I hope I understand your query correctly.
Regards
Yogesh -
After burning original master with No copies allowed, How to make 1000 copies.
After burning original master with No copies allowed, How to make 1000 copies?
I am authoring a DL DVD disc for a Yoga Institute, after burning original master with No copies allowd condition using, CGMS - CSS conditions, How to make 1000 copies.
If I buy DVD duplicator ( replicator?) and hook up to PC via USB , then use the duplicator burner to make copies, how it works. As I tried on www days, after days, burning my eyes, all information is confusing.
This is challanging project and I am entering newly in the market. So this is my death or life. Please help.
OS WIN7 64 bit, CS5.5 Master Collection
Encore Version 5.1.0.342
Thanks in advanceThank you Chris and Stan,
Now I got little true idea how it works.
Copy protection is not my idea, as the Yoga intitute is a non profit organization, very little is also very important for them to run the place.
Every little help counts.
What are the other good options to do in house.
Can you please suggest any links for " in detail study."
Again thank you all of you and thanks to Adobe staff also
Aradhana
Maybe you are looking for
-
I forgot my security questions and my Apple ID has been blocked for attempting too many times entering invalid answers. Now I have tried many times login in to iforgot and edit my profile and I have tried everything to unlock my account and nothing w
-
Can i listen to i tunes and use another app at the same time on ipad 4 ?
I've been trying to figure out how to listen i tunes, or listen to music on a web music site, and play a game at the same time, is that possible to do on an iPad 4 ?
-
Printing a PDF Object to Label printer from AS Java
Hello, at the moment I am looking at a requirement to print from a Java application in a standalone single stack AS Java installation. Currently I would like to use the Adobe Document Services to print to a label printer (e.g. Zebra). This should all
-
Apply adjustment layer to different layer?
Warning: I know just enough to be dangerous. And barely enough to explain myself. I've just managed to create exactly the effect I want, but... I have a layer (HEADER) to which I applied adjustment layers (curves and levels) using "Use Previous Layer
-
Can I buy and use two upgrades?
Hello, have Creative Suite 5.5 Production Premium. I want to upgrade the product. Can I buy and use two upgrades: Creative Suite 6 Design Standard and Creative Suite 6 Production Premium? Second question: if I make my upgrade Creative Suite 5.5 Produ