K8T Neo - Core Center does not support your motherboard!

I installed the latest version of Core Center utility on Windows XP x64.  But if I attempt to run it "Core Center does not support your motherboard!" is displayed.  The download website clearly states that Windows XP x64 is supported.  The message does not mention Windows XP x64 but the problem appears to have something to do with it because there is no problem on Windows XP x86. 
Any suggestion is appreciated.

Quote from: Kaz Honjo on 02-September-07, 21:33:39
I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly.
"I tried the one from the link in your post but no dice, or "Core Center does not support . . . "
Support list :
   MS-6570E,MS-6580(v5.0),MS-6585(v5.0),MS-6590(v2.0),
   MS-6702(v1.0,v2.0),MS-6702E,MS-6714(v5.0),MS-6728(v1.0,v2.0,v3.0),MS-6741,MS-6758(v1.0,v2.0),MS-6788(v1.0,v2.0),MS-6799,
        MS-7003,MS-7008,MS-7021,MS-7025,MS-7028(v1.0,v2.0),MS-7030,MS-7031,MS-7032,MS-7033,MS-7037,MS-7043,MS-7047,MS-7052,MS-7053,MS-7058,MS-7066,MS-7088,
   MS-7100,MS-7125(v1.0,v3.0,v3.A),MS-7133,MS-7135,MS-7143(v2X),MS-7151,MS-7157,MS-7158,MS-7160,MS-7166,MS-7175,MS-7176(v1.0,v2.0),MS-7185,MS-7194
   MS-7203,MS-7220,MS-7226,MS-7235(v1.1),MS-7236(v1.0,v2.1,v2.2,v2.4),MS-7246,MS-7250(v1.0,v2.0),MS-7260,MS-7267(v2.1,v3.0,v3.1,v3.2),MS-7279(v1.0,v2.3),MS-7280
OS : Windows 98/Me/2000/XP32/XP64
Basically should work...
"I tried NextSensor. It seemd to be a stand-alone software and did not require installation. The result was that it did not have any effect on the fan speed. The Status indicated that Temperature of Processor and CPUCoreA were 118 and 35 degree C respectively, and that Fan Speed of CPUFan and SFan were 1250rpm respectively. These appeared incorrect. I could not get any instructions how to set it up so maybe I was not using it correctly."
go to "Control", "Automatic Profile" and select the right senzor to be used.

Similar Messages

  • "Core Center does not support your motherboard" MSI P965 Neo Mobo

    Hi all,
    after upgrading to bios version 1.8 I can not seem to be able to use the Core Center application. Every time I try to start up the application I get an error saying that "Core Center does not support your motherboard". I tried to uninstall and reinstall the program, update to the latest version but with no success. I also tried to use the Dual Core Center but the result was the same.
    Since I am using this program does anybody knows any fix for this problem please. I am sure that this is due to the bios update but I do not know what to do.
    Thanks and Best Regards
    Phanos
    PS
    My System specs are
    Intel core 2 duo 2.13GHz No Overclocking
    Twinmos DDR667  3GB (2 x 512, 2 x 1GB)
    P965 Neo Motherboard bios version 1.8
    Gigabyte 7600GS Graphic card
    Enermax 530 Watt
    Western Digital 16Mb cache 250 GB hard drive @ SATA-2, no RAID
    Maxtor  16Mb cache 320 GB hard drive @ SATA-2, no RAID
    Seagate  16Mb cache 200 GB hard drive @ IDE, no RAID
    BIOS - optimal settings enable USB, 1394 and ACPI.
    WinXP + SP2 + all latest Windows Updates

    Hi Maesus,
    the version of the Core Center is 2.0.2.3. In the about box it does not say beta. I still can not see the new version using the MSI Live Update 3. If someone needs this version please let me know at email removed to prevent spam or contact Msi directly at http://support.msi.com.tw/index.php
    Best Regards
    Phanos
    I removed your email address to prevent you from getting spammed.
    Those wishing to email Phanos, click the email icon to the left below his name.
    Frankenputer

  • DualCoreCenter error - "Dual Core Center does not support!"

    Hi, just bought the insanely expensive MSI 8800 GTX Ulta OC (£457), which seems to ship with insanely cheap utilities.
    I installed the Dual Core Center (after installing the 'latest' nvidia driver 158.22).
    During the install, it insisted on a net framework 2 repair/uninstall for some unknown reason (I have net framework 2 and 3 installed - ie all latest xp patches) with no prior problems.
    Anyway, I let it do the repair and install itself.
    Now when I run the DualCoreCentre, it comes up with error msg: "Dual Core Center does not support!"
    Can someone shed light on what that means please.
    Thanks...

    It means:
    I suck, don't use me!
    Stay away from MSI's utilities. If you want to overclock or control fan speeds or anything else.
    Have a look through: here

  • "Dual Core Center does not support" error msg on K9N Platinum

    Hi,
    I just formated my system and installed all the drivers as I usually do. Last thing I installed was the Dual Core center. I cant make it run as I get "Dual Core Center does not support!" error message. I have an Athlon64 X2 4200+ with the latest cpu driver from AMD web site. Any idea on how I could make Dual Core Center work?
    Thank you.

    Oh ok.
    Well on the CD there is a Core Center, but on the site if you go deep into the specific motherboard download section there is a Dual Core Center. I guess it is for dual CPUs.
    I've download the AMD X2 Driver. I just wanted to use the Cool'N'Quiet option, since I was told that I needed the "Core Center" for that.

  • "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure a fantastic experience" message with IE 11

    Hi All,
    I have recently migrated from TFS 2010 to TFS 2013. When developers are accessing TFS Web interface from IE 11 they are getting message "Visual Studio Online does not support your browser. Please upgrade to a supported browser to ensure
    a fantastic experience!" and page is not showing up correctly. I can open Web interface from Chrome without any issues. Also I figured out if I open Developer Tools (F12) in IE Web Interface also works fine and screwed up again
    when I close Developer Tools.
    What can be wrong with IE11 settings?
    Regards,
    Oleg

    Hi Oleg,       
    Thanks for your post.
    You’re using TFS 2013 Update 4 now?
    Please share your IE 11 screenshot within this error message here.
    Have you use the TeamCompanion in your TFS Server? If yes, please refer to the solution in this article:
    http://www.teamcompanion.com/blog/.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What does it mean on a website if you get a message "does not support your browsers navigation buttons?"

    I was doing my taxes on-line and I got a message saying the software package I was using "does not support your browsers navigation buttons?"

    Which browser are you using?  Which os? 

  • K8T Neo-V V2.0 not supported by Core Center?!

    Hey you Guys!
    My System Config is:
    K8T Neo-V V2.0 (newest Bios) Ms 7144 Ver: 1
    Amd Athlon 3200+
    I finally decided that my Amd Athlon 64 3200+ needs a bit more Power. I wanted to overclock my Cpu in the "traditional" way using the bios settings, but you can only adjust the Bus Speed.
    Then i tried using Core Center just to find out, that the Ms 7144 is the only one not supported.
    Can someone help me? Is there some Software other than Core Center that i could use? Or is there a way to add some additional settings to my bios like at least "Ht Frequency ratio".
    Sorry for my bad english, it is a bit rusty...
    thanx for help!

    I'm afraid you can not do too much at all yourself.
    Nvidia has a program called Ntune that optimises your system in many ways.
    Your English is very good! 

  • K8T Neo - Core Center alarm going off, nothing out of spec?

    I've been running my A64 machine on my K8T Neo board for about 9 months now, with no problems at all.  I've been running Core Center all along, to get Cool 'n Quiet underclocking.  Until today, it's worked flawlessly.
    Tonight, when I booted my machine up (Windows XP SP1), the interface popped up from the minimized icon, and the alarm started going off.  From what I can tell, if the dashboard sees something out of spec, it's supposed to flag it in red.  When I look at all of the reported values, they look the same as they've always looked.
    I went to the MSI site and downloaded/installed v. 2.0.0.4, to see if it was a software problem.  Same thing is happening.  Here are the values being reported (again, they seem to be the same as always).
    Vcore: 1.10
    3.3v: 3.30
    +5V: 5.00
    12V: 12.08 (varies by a coulple hundreths)
    CPU Temp: 34c
    SYS Temp: 38c
    CPU Fan: 1700rpm
    NB Fan: N/A
    Current freqency (A64 3000+): 204Mhz x 5.0 -- 1020 Mhz (idling)
    I'm hesitant to just silence the alarm, in case there's something seriously wrong.  Multiple reboots haven't changed anything.  Any suggestions?  Thanks.

    Quote from: rosenkavalier on 26-May-05, 20:59:41
    Good to know that it's not a unique situation.  I really want to keep using Cool n' Quiet for the automatic underclocking to reduce the heat (at 100% load, my quiet fan doesn't cool all that well -- within range, but still high), without having to manually step the system back up every time a processor load hits.
    See any problems with running Core Center with the alarm turned off, then Speedfan to actually monitor the system?  Or is there any way to get Cool n' Quiet without Core Center?
    Interestingly enough we have the same CPU, and your 1.1V vcore is exactly what I get at 1000Mhz. You get "cool" (cpu Mhz throttling) by virtue of the AMD processor driver and "Minimal Power management" setting in Control Panel, Power Options. If you shut down corecenter and watch your system, if you see what I see on my system, the CPU will stay at 1000Mhz but the fan will not be controlled. Enter - speedfan for fan control. It does a real nice job, with no alarms.
    Dale

  • Core Center does not show up!

    HI Guys,
    I have this problem while using Core Center. When I install it and restart my pc, my tasklist shows corecell with a processor usage of 50%, but is does not show up anywhere in my taskbar. The program is running, but I cannot see the screen.
    MSI 875P NEO-FIS2R with 1.8 bios
    Can anyone help me out? I don't understand

    I found it !!!!
    The problem was my Yamaha SW-1000G. When i remove it from my system Core Center works fine under WinXp.

  • K8t neo far-2 does not boot. fans work.

    Hi all,
    I have been reading the post about this motherboard not posting and simular problems with these boards but mabey mine is a little different. Here is what I have:
    - Thermaltake Tsunami dream
    - Antec True 550 eps12 volt
    - Amd Opteron 244 cpu in slot one.
    - Kingston ram KVR333X72Rc2/512 registered ram.
    - Gigabit gforce fx5900xt vidio card
    When I finally got the vidio card installed it and powered up the pc. Did not post or no audio beeps from the speaker. Tried switchin ram slots with this single stick of ram and tried a pci vidio card cannot get vidio/audio post or beeps.
    I have taken out all the drives to minimize this system to its bare essentials to isolate the problem.
    All I get is the cpu,case and power supply fans that come on and thats it.
    I read in the post that the not hooking up the 4 pin molex from the eps12 volt to the Jpwr2 is not to be done as this actuall supplies power to the vidio card? Doing so would fry the motherboard? If so then why does my vidio card have the traditional molex connector on it as seen on hard drives? it does not match the one on the motherboard. 2. If that square white semi clear four pin connector from the eps ps does not go into that jpwr2 jack on the motherboard then what does it go to???
    Are there bios test LEDS on this motherboard? I dont see any.
    Lastly I hear a faint click every 10 second on the pc speaker but no bios codes.
    You help is much appriciated to rectify this problem.
    James

    In dont want to except this as a blown board. I dont have any warentee on this mothetboard as it was purchaced though a second party.
    If by chance placing the 4 pin molex power cable comming from this power supply into the four pin connector on the motherboard "IEEE is going to hear about this" and it did fry the mothboard would it also fry the cpu and ram? I HOPE NOT what have you heard from other people?
    Bas, read compatibility list about ram and the kingston ram I should be using.
    While this list did not include my ram it should work right?
    My ram may be a little faster but it is ECC. The ram I ordered was specificially ECC kingston ram from compucare and it should work. The ram model number is
    KVR333X72RC25/512
    Also, the power supply is a Antec True 550 EPS12V
    The power supply specs are as follows:
    DC output  +5V    +12V     +3.3V     -5V     -12V     +5V SB
    MAX.          40A    36A        32A       .5A      1.0A      2.0A
    Min.            0A      0.8A       0A         0A      0A         0A
    Now Even with the cpu and memory taken out there should be some post beeps on the speaker? I dont think I have done this yet.
    Lorin

  • Sorry, the all-new Yahoo! Mail does not support your browser.

    Everytime I log into yahoo mail I get this message before proceeding to the e-mail screen. This has been going on for a long time now--as much as a few years, and I want to finally fix it.

    You have a user agent that is corrupted by a general.useragent.override pref and that identifies you as:
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; ru; ToolKit; rv:1.9.0.8) Gecko/2009032609 Firefox
    See:
    *https://support.mozilla.com/kb/Finding+your+Firefox+version
    *https://support.mozilla.com/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    You may want to reset all prefs as a lot seem to have been changed.
    *http://kb.mozillazine.org/Resetting_preferences
    *https://support.mozilla.com/kb/Resetting+preferences

  • Error on K8t neo Core center

    Hi all:
    everytime i run corecenter i get this message:
    Failed to load overclocking driver
    does anyone know why?

    Hello Jocko.  
    I use the limited user rights unless I'm installing something or performing an Admin function.  
    I do this because I've read quite a few articles that say it leaves you more vulnerable to remote installation of malicous programs, Trojans, etc if you surf the web while logged on with full Admin privelages.  I have also read that attacker could even go so far as to open a hidden account with administrator privelages on your machine.

  • Ws-management service does not support your request

    Hello,
    i have Exchnage 2010 SP3 with rollup2
    i'm facing the following error right after Exchange SP3 installed:-
    Please advise

    i followup many scenarios :-
    - restarting power-shell application pool as a suggested solution.
    - recreate Power-shell virtual directory.
    - re-install winrm IIS extension feature.
    - re-install Exchange 2010 SP3
    running the below commands :-
    dism /online /enable-feature /featurename:ServerManager-PSH-Cmdlets
    dism /online /enable-feature /featurename:BestPractices-PSH-Cmdlets
    but the result is 
    Error: 0x800f080c
    Feature name ServerManager-PSH-Cmdlets is unknown.
    A Windows feature name was not recognized.
    Use the /Get-Features option to find the name of the feature in the image and try the command again " 

  • New core center version, not working!

    Iv ealier used Core center with success on my old ms-6561 board. Just formated my drive and wanted to download again, but only found this new one and it does not support my board. Where cfan I find older core senter files?

    core center does not display the temps correctly. download a program called speedfan. its better than corecenter      

  • Virtual Sound does not support my Satellite A100-998 with Vista

    Hi.
    I have Satellite A100-998, and yesterday i find for my laptop available new driver. I download Virtual Sound for my laptop and for vista and when i try install driver i have error "Toshiba Virtual Sound does not support your computer." Why
    Ps. Sorry for my bad English, but please help me!

    Hi,
    had you "Virtual Sound" before? If no, then your machine has probably NO "Virtual Sound". But if yes, then check if you downloaded the appropriate driver for your machine, because there are some many variations of the machine you have, and some of these machines have absolutely different hardware.
    Which operating system is on your machine installed?
    Greets

Maybe you are looking for