K8T Neo / Disable onboard sound

Does anyone know how to disable the onboard Realtek sound through BIOS. I am about to install an Audigy 2 ZS Platnium and I don't want any conflicts. Thanks in advance for any help on this topic.

Make sure you uninstall any realtek sound drivers before you install the Audigy 2 ZS. You may want to run driver cleaner to ensure you eliminate the Realtek audio completely. Also, be sure you're not running an AV when you install the Creative drivers and software.

Similar Messages

  • K8T Neo-FIS2R onboard sound limitation?

    Reading southmikes unofficial guide, it seems you can't use both onboard sound AND a PCI sound card (such as a Turtle Beach Santa Cruz).
    Is this still correct with the 1.6 BIOS?  I want to use the microphone input on the motherboard, but the the TBSC for output.

    Quote
    Originally posted by thegrommit
    Reading southmikes unofficial guide, it seems you can't use both onboard sound AND a PCI sound card (such as a Turtle Beach Santa Cruz).
    Is this still correct with the 1.6 BIOS?  I want to use the microphone input on the motherboard, but the the TBSC for output.
    It was fixed with BIOS v1.3. I use an SB Live! and the onboard sound card, too.
    It was not driver dependent, the BIOS disabled the sound card that is behind the ISA bridge.
    How can I say that? ISA bridge? There ain't no stinking ISA slot on this mobo!
    Look at this listing that I obtained under Linux, particularly the devices labelled
    as 00:11.0 and 00:11.5.
    $ /sbin/lspci
    00:00.0 Host bridge: VIA Technologies, Inc. VT8385 [K8T800 AGP] Host Bridge (rev 01)
    00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South]
    00:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
    00:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
    00:06.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
    00:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
    00:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
    00:08.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
    00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
    00:0d.0 RAID bus controller: Promise Technology, Inc.: Unknown device 3373 (rev 02)
    00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
    00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80)
    00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
    00:10.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
    00:10.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
    00:10.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
    00:10.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 81)
    00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
    00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
    00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    01:00.0 VGA compatible controller: ATI Technologies Inc RV250 [Radeon 9200 SE] (rev 01)
    01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
    The numbers are BB:DD.FF (BB - bus number, DD - device number, FF - function or subdevice) Function number 00 means it's a main device, function numbers other than 00 with the same
    bus and device number is something on or behind the main device.
    With BIOS v1.2 and lower, 00:11.05 was not in the list when the SB Live! was plugged in.
    The BIOS disabled the device. Or did not keep the info about it - it's almost the same since
    Linux also use the PCI BIOS calls to detect the devices. I did not try "direct" mode that
    talks directly to the PCI bridge.

  • How to enter bios, disable onboard sound, and install a sound card

    How do I enter bios, disable onboard sound, and install a sound card?

    Hi,
    You may also have to disable, security for the PCIE x1 slot.
    Windows 8.1 - Accessing the UEFI (BIOS) Setup
    Regrads

  • Disable onboard sound

    How do I disable onboard sound on a KT4 Ultra?  I have Bouston Acoustic (sold by gateway) speakers that require Direct Digital Output to work and it does not seem to be supported by c-media. So I have to install my soundblaster Live!  Can anyone help me either disable on-board sound or get the on-board to support Direct Digital output?
    Thanks
    Edward Nash
     ?(

    you can uninstall the drivers for the onborad sound.  To reinstall your sound blaster remove it from Device Manager and restart your machine and follow the makers instructions, either point the system to the drivers or use the installer, which ever they recommend.

  • 875 Neo FSR2 onboard sound

    875 Neo FSR2 onboard sound, how does it compair with a SB Audigy in Quality , Performance and Compatibility. Seeing as i have this Board and this Card should i use them together or is the onboard sound better (If i had a nforce board id be using the soundstorm onboard sound as its better).
    Anyone have any facts or opinions on this issue?

    Quote
    Believe it or not , The onboard sound on the 875 is pretty good
    I agree. I did a test on the S/N on my board and came up with about 85 dB rms, which is pretty decent. But it won't compare to the Audigy - you'll probably see around 100 dB for that. My SB Live measures 95 dB.
    I don't think you'll be able to use both Audigy and on-board sound at the same time. The BIOS won't let you.

  • Disabling onboard sound on K8T Neo?

    Hello,
    I'm probably being really stupid here but I just can't seem to find the BIOS setting to disable the onboard sound. Can't find it on any of the BIOS pages, can't find it in the manual and there doesn't seem to be a dipswitch on the board itself.
    Anyone?
    TIA

    I must have looked through that menu 20 times and not noticed the submenu. Cos it's in yellow rather than white I read it as a title rather than a menu item.
    I am stupid. Cheers.

  • Will not boot after disabling onboard sound

    I am trying to install an SB Audigy2 ZS sound card but each time I disable the onboard sound card, I cannot boot my system. It will not boot to CD either.  I have tried disabling with SB Audigy2 ZS card installed and without the card installed. I am using the third PCI slot since the video card uses the first slot's space.
    I tried it without 2 of my hard drives in case I was running low on power, but still will not boot.
    Any ideas?

    i have the newer mobo and also have audigy zs it install just right for me but i have it in pci slot 4 (the last one on my mobo) your manual of your mobo will tell you which pci share the same irq ..but when i had your version of mobo i still had it in slot 4 so try pci 4 or 5 to see if that resolves your problem it souds like your video card and sound card are tying to share the same irq which is a big no no

  • [S754 MSI K8T NEO] Some onboard usb ports are 1.1 instead of 2.0 ?

    I own a socket 754 MSI K8T Neo FISR2 mainboard. Due to a lot of USB devices I'm using all ports and it seems like some ports are USB1.1 instead of USB2.0 The manual tells me this mainboard has 8 USB 2.0 ports, but only 2 out of 4 onboard ports at the rear (beneath the PS/2 connectors) seems to be 2.0. At 1 internal connector I do also have connected a frontside USB connector which is 2.0 and at the other connector a memory card reader which also seems to be USB1.1.
    Can someone explain me this is a 'feature' of this board or do I have to upgrade a driver or something?
    In the bios I have enabled all USB-ports and I'm running Windows XP SP2. With Windows Vista Beta2 I even can't get those 'usb 1.1' ports to work.

    It's already solved. I just found this topic: https://forum-en.msi.com/index.php?topic=73390.0
    I had to unplug one of the wires (which is connected to pin 10) of the frontside USB connector form my antec sonata case.

  • P43 Neo alternative onboard sound driver

    Hello again, after a long period of time!
    Can anyone help me with an alternative onboard sound driver for my MSI P43 Neo? It has the Realtek ALC888 implementation and now I use the last MSI driver, from the site. I want something more customizable, for example a full customizable equalizer, not only presets. (Vista x64 and Win7 x64, please)
    Thanks in advance.

    Jack, I know precisely what we are talking about, but I preffere a customizable equalizer in the driver. And I'm not a PC music freak. I have other devices for listening the music. Anyway, the ALC888 on stereo is not so bad how certain people says. It is decent enough.
    Henry, no, I don't have that screen. I have this:

  • KT3 Ultra2-C Mainboard-How to disable onboard sound

     Dear friends@MSI,
    I have a problem with my MSI KT3 Ultra2-C Mainboard.
    I use Creative Live Player Soundcard.I don't know
    how disable RealTec Onboard sound.I read the mainboard's manual but didn't find anything about it.
    I'll be thanking you if you help me.
     Your truly
     Jafar Khayati

    You could get an increase in performance by dissableing it yes. Decent enough to dissable it? I`ll try!!
    11293 = dissabled
    11264 = enabeled
    3DMARK2001se bench
    so a whole 29 points!! :P

  • [Athlon64] Unable to disable onboard sound

    I had upgraded my bios (a good while ago the version escapes me at the moment) to fix the problem I had been having with my 2 512 mb sticks of ram running at slower speeds or crashing the system and I just noticed that a setting to turn off onboard sound is missing (or I just can't find it).

    If you have installed Bios version 2.2 then try dropping back to 2.0. 2.2 has some serious issues that have not been addressed as yet.

  • Should I disable onboard sound when..

    Should I disable the onboard audio and stuff when I install the X-Fi. I installed my X-Fi some time ago and have never had any hardware problems with it, however recently I was in the BIOS options area (F2 at the splashscreen I think) and saw the option for disable onboard audio. Will it improve my system if I do disable it or will it require a reinstall of my soundcards driver and stuff. Any response is appreciated.

    Well,
    You're supposed to disable it, Yes. Your system needs to know wich card you will use. May create conflict if you have both enabled. Yes, disable it.
    Fremen

  • K8n Neo Platinum Onboard Sound driver question

    My Soundblaster card is playing up and I am going to have to use onboard sound for the first time ever.  I just downloaded the latest Realtek ALC Series AC'97 Audio Drivers from the MSI website, but I was wondering before I install the drivers if there are any alternative drivers or if I have to use these ones?
    Any advice appreciated
    Thanks in advance

    nvidia nforce audio driver 4.62
    http://www.nvidia.com/object/nforce_audio_4.62_win2kxp.html

  • Any known compatibility issues with disabling onboard sound and using

    I have the K7 N2 board and disabled on board sound in the bios to use my Turtle Beach Santa Cruz. Sound seems to work fine in Windows Xp and the few games I have installed so far. My problem is with UT2003. When I try to launch the game I get the splash screen then it simply goes away. When I checked the system folder and looked at the debug log it shows the following.
    Exception code: c0000005
    Exception address: 77f51f2c 0001:00000f2c C:WINDOWSSystem32
    tdll.dll
    Call stack:
       77f51f2c 0001:00000f2c C:WINDOWSSystem32
    tdll.dll
       77f5268e 0001:0000168e C:WINDOWSSystem32
    tdll.dll
       77f52631 0001:00001631 C:WINDOWSSystem32
    tdll.dll
       7639131d 0001:0000031d C:WINDOWSSystem32IMM32.dll
       77f5e52d 0001:0000d52d C:WINDOWSSystem32
    tdll.dll
       77e798cc 0001:000188cc C:WINDOWSsystem32kernel32.dll
       77e7990f 0001:0001890f C:WINDOWSsystem32kernel32.dll
       7c00442a 0001:0000342a C:Program FilesUnreal Tournament 2003SystemMSVCR70.dll
       77e814c7 0001:000204c7 C:WINDOWSsystem32kernel32.dll
    I am able to run UT in safe mode without sound. I yanked my Santa Cruz card and uninstalled the drivers and tried with on board but still had the same problem. Since disabling the sound allows me to play, it has to do something with either the on board or my card or some sort of incompatibility between the two. Anyone know of any issues? On a side note. If I was to wipe my drive and use the on board is the quality of the sound as good as using a separate card? Any help would be appreciated.

    Just a follow up...I figured I could spend countless hours trying to figure out why UT wouldn'l load or spend 3 hours wiping the disk and reinstalling software. The latter proved to be worth it. My preference would have been not to install any of the audio drivers at all, but since they are bundled with the system drivers there is really no choice.  The one thing I did differently was not to install the live drivers from the disk that came with my board  but rather update to the newer Nforce 2 system driver dated 2/25/2003.
    So the install went Xp Pro, Sp1, Video drivers,  newest system drivers, disable on board sound in bios, Santa Cruz drivers then UT2003 and the game loads fine. I still get the message about the game port not having enough resources but that can be ironed out.
    Hopefully this information can help someone else out who might experience conflicts going forward.
     A side note..I find that with two network cards (3Com and on board) that Xp will spend about  three mintues after it loads non responsive as it looks for the other network connection. Running the network wizard on box 1 connected to the internet and creating the network disk and running it on the other machine allowing the on board card to see the network and eliminates the painful lull after Xp load to the time I can do anything.
    Thanks for the timely responses. I'm really enjoying this board. So many options, so little time.

  • K8N Neo Platinum onboard sound, "My Microphone burned out"?

       Ok is it possible that my Onboard sound mic burnt out?  Im using a USB headset. I had this board since it came out and love it. All of the sudden i have no mic. Im about to check the headset on another pc but is it possible for it to stop working? Might take me awhile to try on another pc but a quick answer would help.  The onboard sound is ok just i have no mic now.

    I think it might be something with the board/drivers.
    I have an k8n Diamond and my mic stops working from time to time.
    I play css and am on ventrilo the same time and sometimes the mic just stops.
    Doesnt work in verntrilo or css.
    I shut down CSS (counter strike source) and mic is still dead.
    So I close ventrilo and start css again and suddenly mic works again!
    Its weird, seems like some compability issue.
    I find I get less problems if I start the game before ventrilo. Start the game first and then alt-tab (if possible) and start ventrilo.
    I had a k8n platinum before, never had any problems. But it broke so they gave me a k8n diamond on warranty instead, wicth is suppossed to be a better card?

Maybe you are looking for

  • How to export and import dependent tables from 2 different schema

    I have a setup where schema1 has table 1 and schema 2 has table2. And table 1 from schema1 depends upon table 2 from schema 2. I would like to export and import these tables only and not any other tables from these 2 schemas with all information like

  • Transfer With Clearing VS. Transfer without Clearing

    Hi, In SAP There are the folloiwng two transactions 1. Transfer with clearing (F-30) 2. Transfer without Clearing (F-21) Functionality standpoint, what is the difference between those two? When we should use which one? Also, if we have an AR open ite

  • Column Sorting and Rowspanning not working in OBIEE 11g (worked in OBI 10)

    Hi all, i have a report with columns like this: Customer Nbr. | Customer Name | Salesorder | EBIT | EBIT (Total p. Customer) In the table view i have a total sum line at customer level. The column "EBIT (Total p. Customer)" is an Aggregate with Formu

  • Best Practice for converting Temps to Permanent Employees

    I'm interested in how other companies handle the conversion of Temporaory Employees to Regular Full-Time Employees. Currently, my company has a entirely separate "Temp Hire", which we use to get them in the system.  When they convert we perform a Ter

  • Reading data from XML to Internal table

    Hi Experts, I got a requirement to read the data fom xml to internal table.is it possible to store deep internel table data into flat internal tables?my internel table contains 4 internel table and these 4 internel table contains 2 internel tables ea